Commit Graph
2774 Commits
Author SHA1 Message Date
Josiah VanderZee 102dbf536d Do not perform redundant reset on ST7789 displays
The `::init` method in the Adafruit ST7789 library is responsible to
initialize the device. This includes performing a reset, which can be
found in the Adafruit source for `Adafruit_SPITFT`.

Before this change, MeshCore performed its own ST7789 display reset
sequence, which consisted of three steps.

* Pull reset low
* Wait 10ms
* Pull reset high

Importantly, there was no fixed delay after pulling reset high. The
ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode
and 120ms in Sleep Out Mode before it will properly receive commands.
When `Adafruit_SPITFT` resets the device after MeshCore has already
reset it, the mandatory time may not have elapsed, leading to strange
behavior. In the author's case, this issue caused the initial
`fillScreen` to fail, such that the display showed an uninitialized
framebuffer.

This removes the MeshCore delay, leaving the responsibility of reset to
`Adafruit_SPITFT`, where they have the correct delays in place with
extra safety margin. The change was briefly tested by Josiah VanderZee
and Ben Zignego on a custom hardware build using an nRF52840 Dongle and
an Adafruit 4311 TFT display. The user button seemed to behave
strangely, but the display looked correct.
2026-05-04 17:01:39 -05:00
Liam Cottle 093f2a68dc Merge pull request #2462 from meshcore-dev/target-dup-cleanup
Refactor: removed duplicated target code
2026-05-02 17:21:51 +12:00
Liam Cottle 2974793192 Merge pull request #2460 from liamcottle/ui/startup-mute
Don't play startup tune if buzzer pref disabled
2026-05-02 02:24:37 +12:00
liamcottle 17dcdc1b2c don't play startup tune if buzzer pref disabled 2026-05-02 01:47:35 +12:00
Scott Powell 8903b907d1 * Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power() 2026-05-01 14:47:07 +10:00
Liam Cottle d6cedb4fa6 Merge pull request #925 from mtlynch/unit-tests
Add unit tests for Utils::toHex
2026-05-01 14:49:45 +12:00
Liam Cottle 6c28dedb26 Merge pull request #2456 from Avi0n/docs/fix-typos
fix typos in docs
2026-05-01 14:16:51 +12:00
Avi0n bb93ff073c fix typos 2026-04-30 14:21:26 -07:00
Liam Cottle a6ea2bcfb9 Merge pull request #2428 from recrof/minewsemi-refactor
minewsemi: refactor platformio.ini
2026-05-01 00:56:32 +12:00
Rastislav Vysoky 8e1ac0bc3a Merge branch 'dev' into minewsemi-refactor 2026-04-30 14:48:49 +02:00
Liam Cottle 59a6ee658e Merge pull request #2432 from recrof/kiss-radio-everywhere
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
Liam Cottle 4261526fb6 Merge pull request #1954 from OverkillFPV/lora-longer-preamble
Lora longer preamble
2026-04-30 22:12:04 +12:00
Liam Cottle e897e35480 Merge pull request #2448 from weebl2000/bump-sensor-version
bump simple_sensor version to v1.15.0
2026-04-30 21:43:06 +12:00
Liam Cottle de930ef0ad Merge pull request #2430 from oltaco/use-forked-adafruit-nrf52
Use internal fork of Adafruit nRF52 Arduino
2026-04-30 21:42:24 +12:00
liamcottle a294b127ab add comments 2026-04-30 21:36:04 +12:00
Wessel Nieboer 308fded6ab bump simple_sensor version to v1.15.0 2026-04-30 11:12:31 +02:00
Liam Cottle bc7dd6e9ef Merge pull request #2426 from recrof/nano-g2-rework
make g2 more in line with other variants
2026-04-30 16:57:58 +12:00
Liam Cottle 68c820e0b9 Merge pull request #2436 from chrisdavis2110/rak3401-comp-ana-button
feat: Add support for PIN_USER_BTN_ANA on rak3401 companion usb and companion ble envs
2026-04-30 16:57:00 +12:00
Liam Cottle 0dc9ff1682 Merge pull request #2439 from Quency-D/fix-lna
Heltec boards have LNA disabled by default.
2026-04-30 02:35:34 +12:00
Quency-D feb46a6775 Heltec boards have LNA disabled by default. 2026-04-29 16:20:21 +08:00
chrisdavis2110 8c50063eb1 added PIN_GPS_EN=-1 to rak3401 companion usb 2026-04-28 21:59:10 -07:00
chrisdavis2110 ede17ac0b2 added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble 2026-04-28 21:26:56 -07:00
Rastislav Vysoky 0a2f6b1cd9 add kiss radio env to most of the variants 2026-04-28 15:09:25 +02:00
Rastislav Vysoky 3e77c74e61 standardize the minewsemi variant 2026-04-28 13:53:35 +02:00
taco 47e6f2e22c use internal fork of Adafruit nRF52 Arduino 2026-04-28 21:46:14 +10:00
taco f036f7d74c revert bluefruit patch
in preparation to switch to using our own fork of Adafruit NRF52 Arduino with the patch included
2026-04-28 21:39:34 +10:00
Liam Cottle fff204f65f Merge pull request #2427 from recrof/tabs-to-spaces
replace all intendation tabs to spaces in pio ini files
2026-04-28 22:39:31 +12:00
Rastislav Vysoky 0ce4f52324 replace all intendation tabs to spaces in pio ini files 2026-04-28 12:37:30 +02:00
Rastislav Vysoky f22991295e make g2 more in line with other variants 2026-04-28 12:24:45 +02:00
ripplebiz 2b17911b79 Merge pull request #2424 from liamcottle/ui/website
Add MeshCore website to splash screen
2026-04-28 19:12:00 +10:00
liamcottle 5177ca76a2 added website to sensor splash screen 2026-04-28 20:40:13 +12:00
liamcottle e85febb858 added website to room server splash screen 2026-04-28 20:39:07 +12:00
liamcottle a63326c72c added website to companion splash screen 2026-04-28 20:37:17 +12:00
liamcottle 738fe0d7a4 added website to repeater splash screen 2026-04-28 17:02:20 +12:00
ripplebiz 2e72d1c006 Merge pull request #2383 from IoTThinks/MCdev-Added-XiaoS3-202604
Added Xiao S3 variant
2026-04-28 14:23:42 +10:00
Liam Cottle 5afa9a1545 Merge pull request #2392 from zjs81/meshcore_open_data_types
Introduce DataType Definitions for Meshcore Open
2026-04-28 15:42:03 +12:00
Liam Cottle 8cb3e05d8e Merge pull request #2401 from zevaryx/rak-3401-gps
feat: Enable GPS on RAK 1W kit
2026-04-28 13:57:55 +12:00
zjs81 043c950b70 Clarify path length semantics and data handling in inbound group datagrams 2026-04-27 10:49:55 -07:00
zjs81 25bb44e1d1 Refine data type definitions and update registration process in documentation 2026-04-27 10:22:17 -07:00
Liam Cottle 6458b00ccc Merge pull request #2407 from jirogit/fix/wireless-paper-device-model
fix: correct device model name for Heltec Wireless Paper
2026-04-26 21:33:06 +12:00
me d759074d25 fix: correct device model name for Heltec Wireless Paper 2026-04-26 00:23:09 -07:00
Huw Duddy c76b32eb59 Merge pull request #2157 from aXistem-dev/fix/sensecap-solar-tx-led-12
fix(sensecap_solar): correct TX LED after remap & power-button pin changes
2026-04-25 18:03:53 +10:00
Confi ed78ff9212 fix(sensecap_solar): init LED_WHITE LOW to prevent always-on at boot 2026-04-25 09:47:44 +02:00
zevaryx 6fe8ee1c5d feat: Enable GPS on RAK 1W kit 2026-04-24 20:24:50 -06:00
Michael Lynch 802a53b7b0 Update googletest to use 1.17.0 exactly
With the '^x.y.z' semantics, the version can upgrade out from under us and change dependencies, so this pins to an exact version.
2026-04-24 16:17:23 -04:00
Michael Lynch f6ecbef3da Add unit tests for Utils::toHex 2026-04-24 19:37:21 +00:00
Liam Cottle 93e8421004 Merge pull request #2326 from IoTThinks/MCdev-Added-HeltecV4-Expansion-Kit-2026-04-16
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-25 00:14:12 +12:00
zjs81 7c0b509c52 Update companion protocol documentation and enhance data type definitions for clarity 2026-04-24 04:24:20 -07:00
Kevin Le c336da0f3d Added Xiao S3 variant.
This is for Xiao S3 and a normal Wio SX1262 for Xiao shield.
2026-04-24 11:56:06 +07:00
liamcottle 7ea1bbf5d5 update discord links 2026-04-24 15:57:34 +12:00