Commit Graph
3407 Commits
Author SHA1 Message Date
Michael Graff 233a46efeb Address review: per-variant wifi src, real SSID reply, rename PicoW env 2026-09-06 21:28:04 -05:00
Michael Graff b0e7bc385a Fix review findings on Pico W WiFi/BLE 2026-09-06 20:43:37 -05:00
Michael Graff 5344e73dec Add BLE companion support for Pico W 2026-09-06 20:15:45 -05:00
Michael Graff b9fbf072ab Fix config parser aborting on an empty object
'custom:{}' (a DynamicConfigSerializer with nothing set) hits EXPECT_KEY
with a '}' and returns TOK_ERROR, so loadSerial stops there and silently
drops every property after it. Nothing follows 'custom' in NodePrefs
today, so it goes unnoticed until you add one.

Also include stdlib.h, which Arduino.h was providing on-device but not
in the native test build.
2026-09-05 23:15:13 -05:00
Michael Graff 02cc250fc2 Address review findings on WiFi companion support
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
  (cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
  physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
  it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
  down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
  network
- teach build_as_lib.py where SerialWifiInterface moved
2026-09-05 23:15:13 -05:00
Michael Graff 0f0c1dc75a Fix blocking WiFi connect on RP2040, log link state
arduino-pico's WiFi.begin() blocks for up to 2x its 15s timeout, which
stalled the mesh loop on every reconnect attempt; use beginNoBlock().
Log the IP when the link comes up, and the status code when retrying.
2026-09-05 23:15:13 -05:00
Michael Graff 48cc30777d Allow WiFi credentials to be set at runtime
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
2026-09-05 23:15:13 -05:00
Michael Graff 676169b777 Add WiFi companion support for Pico W
SerialWifiInterface has no ESP32-specific code, so move it to
helpers/wifi and reuse it on RP2040. Guard the ESP32-only WiFi
event/auto-reconnect calls and poll link state on RP2040 instead.
2026-09-05 23:15:13 -05:00
Liam Cottle 4606918fad Merge pull request #3319 from oltaco/w12_txpower
Fix Meshnology W12 TX power
2026-09-01 23:06:58 +12:00
Liam Cottle 2cad3e1561 Merge pull request #3329 from reinforce/tz_offset
companion: get/set timezone offset for clock
2026-09-01 22:56:19 +12:00
Aleksei Mamlin c9e5cc15ba companion: get/set timezone offset for clock
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
2026-08-31 09:08:22 +03:00
fdlamotte d51bd9acca Merge pull request #3279 from fdlamotte/node_discover_ui
Node discover UI
2026-08-30 19:51:02 -04:00
fdlamotte dcd931fa2e Merge branch 'dev' into node_discover_ui 2026-08-29 11:02:58 -04:00
taco 3739ce91cf fix Meshnology W12 TX power 2026-08-29 15:22:54 +10:00
Scott Powell 5c32c46219 New TXT_TYPE_CLI_COMMAND (3) 2026-08-28 13:12:59 +10:00
liamcottle 599ecfcb65 fix cad cli command on companion 2026-08-27 19:05:18 +12:00
Liam Cottle 5edc936301 Merge pull request #3298 from meshcore-dev/companion-cli
Companion CLI
2026-08-27 18:17:10 +12:00
Scott Powell 3d4eadd2cd * fix for RPI Picow 2026-08-25 19:04:32 +10:00
Scott Powell 6239b462f2 * companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented. 2026-08-24 20:44:17 +10:00
Scott Powell 55855f4cae * DynamicConfigSerializer fixes, and unit tests 2026-08-24 19:42:55 +10:00
Liam Cottle e6d9abee21 Merge pull request #3275 from liamcottle/gps/rak3401
Fix PA on RAK3401 when GPS missing
2026-08-24 19:52:10 +12:00
Scott Powell 71deb27b7e * prefs, custom dirty state 2026-08-24 17:22:15 +10:00
Scott Powell 5a7bc507d1 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
Huw Duddy b880ab1cb6 Merge pull request #3290 from liamcottle/feature/ui-no-hibernate
add UI_NO_HIBERNATE build flag to disable hibernate screen
2026-08-24 13:40:47 +10:00
liamcottle 2136978378 add UI_NO_HIBERNATE build flag to disable hibernate screen on wio tracker l1 2026-08-24 13:45:19 +12:00
Scott Powell b5b20a7738 * refactored 'FEM' commands for HeltecTrackerV2 & HeltecV4 2026-08-24 02:16:18 +10:00
Scott Powell 8c73c948b4 * T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Florent a9c977db51 ui: opt-out for discover screen 2026-08-23 10:42:00 -04:00
Scott Powell ae61e1a61c support for CMD_SEND_TXT_MSG and new TXT_TYPE_CLI_COMMAND 2026-08-23 22:49:45 +10:00
Scott Powell 644e68d0ff * new TXT_TYPE_CLI_COMMAND (3) 2026-08-23 22:04:05 +10:00
Scott Powell 2c43bf1ba1 legacy queueMessage() case, eg. repeater replies 2026-08-23 20:07:28 +10:00
Scott Powell a29ccab178 onCommandDataRecv() use '>' prefix for CLI replies. 2026-08-23 20:03:49 +10:00
Scott Powell df507deac9 "Unknown command" replies 2026-08-23 19:35:43 +10:00
Scott Powell f66ed7ca88 * CommonRadioPrefs refactors done 2026-08-23 17:30:30 +10:00
Scott Powell 414e91fd5d * adding new CommonRadioPrefs
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
liamcottle 1266fc058f don't toggle io pins on rak3401 when probing gps 2026-08-23 14:14:45 +12:00
ripplebiz 219a5d1cc1 Merge pull request #3268 from liamcottle/rak/gps
Add support for RAK12500 and RAK12501 GPS on RAK3401
2026-08-22 14:35:21 +10:00
liamcottle f58c7293e2 add support for rak12500 and rak12501 gps on rak3401 2026-08-22 16:16:32 +12:00
Florent 2678be75bd ui: repeater discover screen 2026-08-21 18:24:46 -04:00
entr0p1 93bd279d34 Duplicate MAX_CLIENTS definition
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.

This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).

Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-21 15:11:57 -04:00
Scott Powell 5eaf5a86fb * initial wiring/routing of CLI commands to companion (either via app/serial interface, or remotely via txt message) 2026-08-21 20:55:57 +10:00
ripplebiz 1a8d860d8d Merge pull request #3233 from entr0p1/fix/centralise-max-clients
Fix duplicate MAX_CLIENTS definition
2026-08-20 14:09:30 +10:00
ripplebiz acc68d4fd4 Merge pull request #3234 from agessaman/fix/sensors-bosch-alt-i2c-address
Fix I2C address claiming and probe both BMP/BME addresses
2026-08-20 14:01:49 +10:00
ripplebiz 1e2e577885 Merge pull request #3236 from DominikTyrala/fix/c3_partition_setup
Fix Seeed C3 radio BLE exceeding flash size
2026-08-20 13:38:26 +10:00
ripplebiz 1f8a227e4b Merge pull request #3249 from dl9sau/patch-1
Skip empty channel slots in searchChannelsByHash
2026-08-20 13:11:02 +10:00
ripplebiz d225d29384 Merge pull request #3250 from hansimgamr/feat/t114-charging-indicator
Add charging indicator to companion_radio battery icon
2026-08-20 12:59:26 +10:00
hansimgamrandClaude Opus 4.8 cdff1a5f4f Show plug at >=95% instead of exactly 100%
Boards without a charge-complete signal only infer "full" from voltage, and
a real pack rarely reads the full BATT_MAX_MILLIVOLTS (4.2V), so the plug icon
was effectively never shown. Treat "full" as a high band (>= 95%) so the plug
appears when the battery is charged rather than requiring an exact 100%.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
hansimgamrandClaude Opus 4.8 0c72b517e8 Add charging indicator to companion_radio battery icon
Show a small lightning-bolt icon to the left of the battery indicator on
the ui-new home screen while the device is externally powered, and a plug
icon once the battery reads full. The bolt/plug sits beside the battery so
the fill bar stays clean and uninterrupted. When a buzzer is present, the
mute icon shifts one slot further left so the two never overlap.

Charging state is derived from board.isExternalPowered(), so this works on
any board that reports external power (e.g. the nRF52 VBUS-detect path).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
Thomas Osterried cedc9977c2 Skip empty channel slots in searchChannelsByHash
An unconfigured slot has an all-zero secret, so it matches null-key group traffic (a sender with an unset PSK). The zero-key MAC validates against the empty slot and the foreign message is delivered as if it belonged to that channel — every node with a free slot is a null-key sink. Skip empty slots.
2026-08-19 09:35:25 +02:00
liamcottle b123971e21 fix for 3-byte paths passed to CMD_SEND_RAW_DATA 2026-08-19 18:59:24 +12:00