taco
2cb674af2f
support for meshtiny
2026-01-27 14:15:02 +11:00
ripplebiz
dd21b64fb3
Merge pull request #1476 from mattzzw/region_via_LoRa
...
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
Matthias Wientapper
9dbda71566
Add output of region cmd via lora cli
...
Add cli commands "region list {allowed|denied}"
2026-01-26 17:44:43 +01:00
ripplebiz
bcf6fe985d
Merge pull request #1488 from liamcottle/firmware/boot-adverts
...
Change advert on boot from flood to zero hop
2026-01-26 21:55:48 +11:00
liamcottle
2fb315839c
increase maximum flood advert interval to 168 hours (7 days)
2026-01-26 23:05:10 +13:00
liamcottle
c8992ae5b6
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00
liamcottle
6cb97cca77
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
ripplebiz
0d6d2b9b9f
Merge pull request #1477 from Cisien/dev
...
Expose a counter to track RadioLib receive errors
2026-01-26 19:04:48 +11:00
Scott Powell
13118a1cc5
* region names now don't need '#' prefix. (SHA still adds a '#' for back compat)
2026-01-25 18:35:55 +11:00
Chris
834d2ff6dd
Expose a counter to track RadioLib receive errors
...
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
2026-01-24 20:06:29 -08:00
ripplebiz
9a5604a7ab
Merge pull request #1429 from Snayler/dev
...
Fix Serial and TX LED not working on Heltec Wireless Paper V1.2
2026-01-25 14:58:07 +11:00
ripplebiz
816a4bdaca
Merge pull request #1465 from recrof/rak3112-port
...
initial RAK 3112 support
2026-01-25 14:56:17 +11:00
ripplebiz
d32913a694
Merge pull request #1457 from oltaco/remote-set-prvkey
...
Allow set prv.key over LoRa, clear ACL and validate key
2026-01-25 14:46:41 +11:00
taco
a6ecec57f1
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
taco
447b4ca36c
recalc ClientACL shared_secrets at startup
2026-01-25 01:32:44 +11:00
taco
1df8dc9ef3
refactor ClientACL and CommonCLI, add ClientACL::clear()
2026-01-25 01:31:53 +11:00
Scott Powell
e297b5c908
* WIO tracker l1: BLE companion. default node name now MAC address
2026-01-24 22:08:05 +11:00
ripplebiz
9d43a8c467
Merge pull request #1456 from Quency-D/fix-env-i2c
...
Fix env i2c errors
2026-01-24 21:58:14 +11:00
ripplebiz
8ef427b304
Merge pull request #1413 from entr0p1/powermgt-nrf52840-v2
...
nRF52840 Power Management v2 Phase 1 - LPCOMP Wake and startup lockout
2026-01-24 21:51:06 +11:00
Liam Cottle
6a69ae763f
Merge pull request #1459 from oltaco/fix-roomserver-debug
...
Build fix for room server with MESH_DEBUG
2026-01-24 19:31:31 +13:00
Rastislav Vysoky
674f1ec7be
fixed battery measurement
2026-01-23 23:35:00 +01:00
Rastislav Vysoky
5c14894da3
initial port of rak3112
2026-01-23 22:26:24 +01:00
taco
3850bd9fbe
build fix for room server with MESH_DEBUG=1
2026-01-23 23:43:05 +11:00
entr0p1
07316891fc
nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout
...
Added NRF52840 power management core functionality:
- Boot‑voltage lockout
- Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2)
- LPCOMP wake (for voltage-driven shutdowns)
- VBUS wake (for voltage-driven shutdowns)
- Per-board shutdown handler for board-specific tasks
- Exposed CLI queries for power‑management status in CommonCLI.cpp
- Added documentation in docs/nrf52_power_management.md.
- Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards
2026-01-23 17:18:41 +11:00
Scott Powell
bce64a57f9
* T1000e BLE - default node name is now the MAC address
2026-01-23 15:53:58 +11:00
Quency-D
105c96033b
Fix the issue of inconsistent I2C usage in the environmental sensor.
2026-01-23 10:45:13 +08:00
ripplebiz
8bafdae3bd
Merge pull request #1428 from etienn01/update-t114-i2c
...
Update T114 I2C pins for external RTC
2026-01-23 12:25:07 +11:00
ripplebiz
b777ffc865
Merge pull request #1437 from nakoeppen/dev
...
Remove _serial->isConnected() logic from buzzer notifications
2026-01-23 12:20:57 +11:00
ripplebiz
df7037bdcc
Merge pull request #1415 from WattleFoxxo/StationG2-tx-power-changes
...
Change the Station G2's default TX power
2026-01-23 11:58:53 +11:00
Liam Cottle
dfad6da737
Merge pull request #1445 from oltaco/thinknode_m1-gps-fix
...
ThinkNode M1 GPS fixes
2026-01-22 20:02:41 +13:00
taco
0ee9e82533
thinknode m1: allow GPS to sync clock
2026-01-22 14:42:43 +11:00
taco
cfa985d2b8
thinknode m1: add missing GPS page to new UI
2026-01-22 14:42:08 +11:00
taco
864b125c5f
thinknode m1: add missing getLocationProvider() override
2026-01-22 14:41:07 +11:00
nakoeppen
d93179f3fd
Remove _serial->isConnected() logic from buzzer notifications
2026-01-20 20:19:10 -06:00
Miguel de Matos
de29ce84eb
Fix Serial and TX LED not working on Heltec Wireless Paper V1.2
...
As described on #1276 , tested and working on my heltec wireless paper v1.2
2026-01-20 01:52:45 +00:00
Étienne Fesser
8e52af6f1d
Update T114 I2C pins
2026-01-19 21:39:01 +01:00
ripplebiz
c8ad37bb9c
Merge pull request #1387 from chrisdavis2110/rak3401
...
Add Variant rak3401 (for new 1W booster kit)
2026-01-19 16:11:07 +11:00
ripplebiz
6d06bbe6a0
Merge pull request #1408 from oltaco/improved-contact-mgmt
...
Contact management tweaks
2026-01-19 12:29:52 +11:00
chrisdavis2110
5c568f5362
updated variant rak3401
2026-01-17 22:54:20 -08:00
Chris Davis
1477c1889d
Merge pull request #4 from chrisdavis2110/var-rak3401
...
Var rak3401
2026-01-17 22:47:25 -08:00
WattleFoxxo
65116bc7cd
Change the Station G2 default tx power
...
set the default TX power to 7dBm to avoid illegal power output by default.
2026-01-18 14:29:50 +11:00
taco
a47add9c58
only write contacts when changed
2026-01-16 13:15:35 +11:00
taco
807b4b9530
always send PUSH_CODE_NEW_ADVERT when advert was not added to contacts[]
2026-01-16 13:15:35 +11:00
Liam Cottle
5986f512c2
Merge pull request #1402 from recrof/v3-usb-contact-fix
...
fix: bump max contacts for heltec v3 companion usb
2026-01-16 09:50:06 +13:00
Rastislav Vysoky
6e0f3cb2fc
fix: bump max contacts for v3 companion usb
2026-01-15 15:39:44 +01:00
Liam Cottle
2602d6e228
Merge pull request #1399 from mannkind/patch-1
...
Fix Ikoka Stick builds
2026-01-15 23:32:34 +13:00
ripplebiz
667ab27e52
Merge pull request #1379 from oltaco/improved-contact-mgmt
...
Companion: Improved Contact Management
2026-01-15 20:36:28 +11:00
taco
bb9f2eca7e
bootstrap RTC from contact.lastmod and improve slot overwrite logic
...
slot overwrite logic can now safely use contact.lastmod to find oldest contact for overwrite
2026-01-15 18:01:20 +11:00
taco
74f4b8bc82
refactor: add populateContactFromAdvert()
2026-01-15 18:01:20 +11:00
taco
38a4390b2e
contacts: granular autoadd and overwrite-oldest
2026-01-15 18:01:20 +11:00