Dan Theisen
397ea610e6
RX Boosted Gain was set back to the compiled in value rather than the current/flash value set by the user when the ACG reset is triggered. This commit fixes this.
2026-08-09 18:11:35 -07:00
Huw Duddy
79d2eeaa76
Merge pull request #3148 from recrof/add-missing-kiss-radio
...
add missing kiss radio roles, add kiss radio build to build.sh
2026-08-09 22:22:08 +10:00
Rastislav Vysoky
d3f9cbb922
add missing kiss radio roles, add kiss radio build to build.sh
2026-08-09 14:17:18 +02:00
Huw Duddy
66eb74f0fb
Merge pull request #3140 from entr0p1/fix/techo-lite-pins
...
Lilygo T-Echo Lite Pin Fixes
2026-08-09 22:06:21 +10:00
Scott Powell
da1fc9c0e8
Merge branch 'dev'
...
# Conflicts:
# docs/payloads.md
companion-v1.17.0
repeater-v1.17.0
room-server-v1.17.0
2026-08-09 15:16:48 +10:00
Scott Powell
68dedd3e96
* version 1.17.0
2026-08-09 15:14:46 +10:00
entr0p1
430ef3b086
Lilygo T-Echo Lite Pin Fixes
...
- Aligned to Lilygo's updated schematic and pin map as per https://github.com/Xinyuan-LilyGO/T-Echo-Lite/issues/14
2026-08-09 14:09:35 +10:00
ripplebiz
02f7fb7cbc
Merge pull request #3139 from oltaco/x1-flash
...
Add QSPIFlash support for Seeed MeshTracker X1
2026-08-09 13:52:56 +10:00
Huw Duddy
484967f36d
Merge pull request #3125 from Hacuchino-hash/fix-x1-charge-status
...
Fix X1 charge status LED always showing charged
2026-08-09 12:54:29 +10:00
taco
e1fa02a677
bump CustomLFS version for GD25Q64C support
2026-08-09 11:45:35 +10:00
taco
964d87c890
add QSPIFlash support for Seeed MeshTracker X1
2026-08-09 11:41:09 +10:00
Hacuchino-hash
4160dfbb87
Fix X1 charge status LED always showing charged
2026-08-07 08:08:08 -05:00
ripplebiz
3bfca7b79d
Merge pull request #3122 from Hacuchino-hash/x1-notifications
...
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-07 15:26:33 +10:00
Huw Duddy
27f58e075e
Merge pull request #3121 from liamcottle/config/disable-companion-cad
...
Disable CAD on Companion Firmware until it's configurable
2026-08-06 22:40:37 +10:00
Hacuchino-hash
dc8e2d6745
Add SPA06 barometer telemetry and charge status LED for MeshTracker X1
2026-08-06 07:27:05 -05:00
Hacuchino-hash
f8ea866b1f
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-06 07:27:05 -05:00
liamcottle
3da5f1d4c5
disable cad on companion until it's configurable
2026-08-07 00:19:18 +12:00
Liam Cottle
8900202da9
Merge pull request #3120 from recrof/patch-2
...
ThinkNode M6: Remove QSPIFLASH=1 build flag to fix companion roles
2026-08-06 22:54:24 +12:00
Rastislav Vysoky
63108c2c90
ThinkNode M6: Remove QSPIFLASH=1 build flag to fix companion roles
...
M6 doesn't have flash chip available, so companion roles fail to start.
2026-08-06 12:37:21 +02:00
ripplebiz
2b662e2850
Merge pull request #3112 from Hacuchino-hash/add-meshtracker-x1
...
Add support for Seeed SenseCAP MeshTracker X1 (LR2021)
2026-08-06 16:04:18 +10:00
Hacuchino-hash
5b2613fc0a
Add support for Seeed SenseCAP MeshTracker X1 (LR2021)
2026-08-05 05:50:21 -05:00
ripplebiz
8bf182fb41
Merge pull request #3115 from oltaco/meshnology_w12
...
Add support for Meshnology W12 and LR2021 Wrapper
2026-08-05 15:04:00 +10:00
taco
cb7b158931
LR2021: auto-LDRO for side detectors
2026-08-05 14:23:32 +10:00
taco
c2b7e56cbc
LR2021: fix for hardware cad and side detectors
2026-08-05 14:23:32 +10:00
taco
5687ba3f87
LR2021 multi-SF support (side detectors)
2026-08-05 14:23:32 +10:00
taco
e2d050df9f
add Meshnology W12 support and LR2021 wrapper
2026-08-05 14:23:29 +10:00
Liam Cottle
fee753faae
Merge pull request #3107 from meshcore-dev/anon-req-fix
...
bounds check added for anon_req reply_path_len
2026-08-04 13:34:18 +12:00
fdlamotte
bb48b096ce
Merge pull request #2863 from benskigomez/fix/m6-gps-reset-pin
...
thinknode_m6: don't drive GPS REINIT pin so the L76K is detected
2026-08-03 21:16:59 -04:00
Scott Powell
c63f7d77f7
* bounds check added for anon_req reply_path_len
2026-08-04 01:00:31 +10:00
Huw Duddy
06685f6fae
Merge pull request #3076 from MDamon/fix/lr1110-rx-timeout
...
LR1110: fix startReceive() passing an IRQ bit as the RX timeout 🤖 🤖
2026-08-03 23:02:52 +10:00
Huw Duddy
02bb3bbad8
Clean up comments in startReceive method
...
Removed unnecessary comments regarding RX timeout and IRQ mask.
2026-08-03 22:57:34 +10:00
Liam Cottle
6442e73595
Merge pull request #3098 from jirogit/fix/unit-c6l-flash-mode-dio
...
fix: M5Stack Unit C6L boot failure caused by flash_mode=qio
2026-08-03 19:45:38 +12:00
ripplebiz
1b4afa95b6
Merge pull request #2824 from NickDunklee/rak-advert-hw-encryption
...
feat: use nrf52 hardware crypto where we can
2026-08-02 15:35:33 +10:00
me
77b1356b36
fix: M5Stack Unit C6L merged.bin fails to boot (flash_mode qio->dio)
...
Board manifest for esp32-c6-devkitm-1 defaults build.flash_mode to qio,
which this module's flash chip does not support -- causes a boot
crash-loop (repeated USB-Serial-JTAG reconnects) on real hardware.
Override with board_build.flash_mode = dio in the common M5Stack_Unit_C6L
section so it applies to all envs (ble/usb/repeater/room_server).
2026-08-01 22:20:20 -07:00
Mike Damon
d535134724
LR1110: fix startReceive() passing an IRQ bit as the RX timeout
...
CustomLR1110::startReceive() passed RADIOLIB_LR11X0_IRQ_PREAMBLE_DETECTED
(1<<4 = 16) as RadioLib's first argument, which is the RX *timeout*, not an
IRQ mask. At the LR11x0's 30.52us tick that armed the receiver for ~488us, so
it dropped out of RX before any packet could arrive and the node received
nothing at all -- while transmitting normally.
Symptoms on a SenseCAP T1000-E: tx_air_secs rising, rx_air_secs stuck at 0,
recv_errors 0, and the noise floor pinned at the -120 clamp because
getCurrentRSSI() never sampled a live receiver.
Pass RADIOLIB_LR11X0_RX_TIMEOUT_INF (continuous RX), which is what
LR11x0::startReceive() itself uses, keeping the PREAMBLE_DETECTED flag in the
reported IRQ flags as intended.
Introduced in 04b643b2 ("LR1110: add PREAMBLE_DETECTED to reported irq flags").
Verified on two T1000-E units: with only the repeater fixed it began receiving
(last_rssi -29, SNR 17.0) while the unfixed companion stayed deaf; fixing both
brought up the link in each direction.
2026-07-30 12:14:39 -04:00
ripplebiz
c5e44928eb
Merge pull request #2688 from Che177/feature/room-server-system-posts
...
room_server: add room.post command for server-originated posts
2026-07-30 13:08:18 +10:00
ripplebiz
837869fa93
Merge pull request #3004 from axhoff/agent/preserve-utf8-advert-names
...
Preserve UTF-8 boundaries in advert names
2026-07-30 12:59:59 +10:00
ripplebiz
17b809d62c
Merge pull request #3060 from entr0p1/fix/mesh-debug-active
...
Clean up debugs left on in platform.ini files
2026-07-30 12:35:22 +10:00
ripplebiz
ef08c7b0f3
Merge pull request #3063 from oltaco/unify-irq-timeout
...
Unify IRQ timeout logic across all applicable radio types
2026-07-29 23:52:48 +10:00
ripplebiz
4cf508121e
Merge pull request #3049 from liamcottle/feature/ethernet
...
Refactor Companion Interfaces + Add ThinkNode M7 Ethernet Support
2026-07-29 23:45:51 +10:00
taco
dc6264b870
LLCC68: add IRQ timeout logic
2026-07-29 23:34:01 +10:00
taco
2f19204283
SX1268: add IRQ timeout logic
2026-07-29 23:34:01 +10:00
taco
c490abf452
STM32WLx: add IRQ timeout logic
2026-07-29 23:33:51 +10:00
taco
7fbac66a33
LR1110: fix unnecessary IRQ clear
2026-07-29 23:18:15 +10:00
ripplebiz
12476c3684
Merge pull request #3062 from oltaco/fix-irq-clear
...
Fix unnecessary IRQ clearing
2026-07-29 22:37:30 +10:00
taco
0f543ccc34
fix unnecessary IRQ clear
2026-07-29 21:39:56 +10:00
entr0p1
52fb56395d
Clean up debugs left on in platform.ini files
2026-07-29 18:27:15 +10:00
Che177
8762862522
room_server: use standard mesh debug logging
2026-07-28 21:57:42 -07:00
Liam Cottle
fec0521099
Merge pull request #3047 from dg1tal/codex/docs-3044-group-privacy
...
Clarify hashtag privacy and group sender identity
2026-07-28 15:41:48 +12:00
Liam Cottle
31a5fe838a
Merge pull request #3048 from entr0p1/fix/startota-failure-recovery
...
nRF52840 "start ota" Failure Recovery
2026-07-28 15:36:48 +12:00