Commit Graph
3260 Commits
Author SHA1 Message Date
Liam Cottle 6442e73595 Merge pull request #3098 from jirogit/fix/unit-c6l-flash-mode-dio
fix: M5Stack Unit C6L boot failure caused by flash_mode=qio
2026-08-03 19:45:38 +12:00
ripplebiz 1b4afa95b6 Merge pull request #2824 from NickDunklee/rak-advert-hw-encryption
feat: use nrf52 hardware crypto where we can
2026-08-02 15:35:33 +10:00
me 77b1356b36 fix: M5Stack Unit C6L merged.bin fails to boot (flash_mode qio->dio)
Board manifest for esp32-c6-devkitm-1 defaults build.flash_mode to qio,
which this module's flash chip does not support -- causes a boot
crash-loop (repeated USB-Serial-JTAG reconnects) on real hardware.
Override with board_build.flash_mode = dio in the common M5Stack_Unit_C6L
section so it applies to all envs (ble/usb/repeater/room_server).
2026-08-01 22:20:20 -07:00
ripplebiz c5e44928eb Merge pull request #2688 from Che177/feature/room-server-system-posts
room_server: add room.post command for server-originated posts
2026-07-30 13:08:18 +10:00
ripplebiz 837869fa93 Merge pull request #3004 from axhoff/agent/preserve-utf8-advert-names
Preserve UTF-8 boundaries in advert names
2026-07-30 12:59:59 +10:00
ripplebiz 17b809d62c Merge pull request #3060 from entr0p1/fix/mesh-debug-active
Clean up debugs left on in platform.ini files
2026-07-30 12:35:22 +10:00
ripplebiz ef08c7b0f3 Merge pull request #3063 from oltaco/unify-irq-timeout
Unify IRQ timeout logic across all applicable radio types
2026-07-29 23:52:48 +10:00
ripplebiz 4cf508121e Merge pull request #3049 from liamcottle/feature/ethernet
Refactor Companion Interfaces + Add ThinkNode M7 Ethernet Support
2026-07-29 23:45:51 +10:00
taco dc6264b870 LLCC68: add IRQ timeout logic 2026-07-29 23:34:01 +10:00
taco 2f19204283 SX1268: add IRQ timeout logic 2026-07-29 23:34:01 +10:00
taco c490abf452 STM32WLx: add IRQ timeout logic 2026-07-29 23:33:51 +10:00
taco 7fbac66a33 LR1110: fix unnecessary IRQ clear 2026-07-29 23:18:15 +10:00
ripplebiz 12476c3684 Merge pull request #3062 from oltaco/fix-irq-clear
Fix unnecessary IRQ clearing
2026-07-29 22:37:30 +10:00
taco 0f543ccc34 fix unnecessary IRQ clear 2026-07-29 21:39:56 +10:00
entr0p1 52fb56395d Clean up debugs left on in platform.ini files 2026-07-29 18:27:15 +10:00
Che177 8762862522 room_server: use standard mesh debug logging 2026-07-28 21:57:42 -07:00
Liam Cottle 31a5fe838a Merge pull request #3048 from entr0p1/fix/startota-failure-recovery
nRF52840 "start ota" Failure Recovery
2026-07-28 15:36:48 +12:00
Che177 b9918e6037 room_server: add room.post system posts 2026-07-27 19:50:13 -07:00
entr0p1 d4ee0fc4eb nRF52840 "start ota" Failure Recovery
If Bluefruit.begin fails, BLE OTA mode won't actually start and the board might require a reboot to reattempt.

Fixes:
- Bluefruit.begin returns false in NRF52Board.startOTAUpdate if OTA mode fails to start. User is notified of the fault through existing error message in CommonCLI and can reattempt "start ota" command.
2026-07-28 10:14:59 +10:00
liamcottle b1218c1dbe fix bluetooth toggle on ui tiny 2026-07-28 03:50:08 +12:00
liamcottle 6e815d755f usb companion firmwares now require build flag to include usb interface 2026-07-28 03:45:02 +12:00
liamcottle 4ba459402c remove old rak ethernet interface 2026-07-28 03:18:54 +12:00
liamcottle bd83d290da refactor rak13800 to new ethernet interface class 2026-07-28 03:18:54 +12:00
liamcottle 6a785759d3 refactored companion interfaces to allow for multiple active connection modes 2026-07-28 03:18:54 +12:00
liamcottle a20eb51124 rename class 2026-07-28 03:18:54 +12:00
liamcottle 1c7a4b307f initial ch390 ethernet support for thinknode m7 companion 2026-07-28 03:18:54 +12:00
ripplebiz 86cf57b4e7 Merge pull request #2982 from meshcore-dev/config-serializer
Config serializer
2026-07-27 17:58:03 +10:00
ripplebiz f2e46925e6 Merge pull request #3034 from meshcore-dev/ui-color-refactor
UI color refactor
2026-07-27 17:45:12 +10:00
Liam Cottle 4d9d44065a Merge pull request #3040 from blowfishpro/docs/FixPayloadDocsFormatting
Increase header levels on "Payloads" documentation page to fix table of contents
2026-07-27 14:13:09 +12:00
Talia 9d2343e06f docs: increase header levels on payloads page to fix table of contents
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents

this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
2026-07-26 15:55:27 -07:00
ripplebiz 6aaea1ecbe Merge pull request #3036 from oltaco/add-preamble-irq-flag
Fix missing PREAMBLE_DETECTED IRQ flag for all radio wrappers
2026-07-25 01:40:19 +10:00
taco fd3639dd4e SX1268: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco a04833f029 STM32WLx: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco 15edc9e9e9 LLCC68: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco 04b643b21a LR1110: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:36 +10:00
taco 11a0236c2c SX1262: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:38:44 +10:00
Scott Powell 1d4e21c89f * T114 display fix 2026-07-24 18:35:56 +10:00
Scott Powell b6ff4ad43f * fixed for mono ST7789 display driver 2026-07-24 15:31:22 +10:00
Scott Powell c194f52916 * monochrome displays now do _not_ invert titlebar 2026-07-24 15:14:56 +10:00
Scott Powell cfb7d156e9 Merge branch 'dev' into config-serializer
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Liam Cottle c5c78d37bd Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276
Increase LilyGo T-Beam SX1276 channels from 8 to 40
2026-07-24 15:34:19 +12:00
liamcottle 77244ce4a6 increase tbeam sx1276 max group channels from 8 to 40 2026-07-24 15:31:01 +12:00
Liam Cottle b057f40b53 Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Nick Dunklee 0b7f83894f Global nrf52 hardware crypto, removed from individual configs
Select nodes had this flag enabled, testing by the community
and hardware specs indicate this can be enabled global for all
node types using this chipset.

Any nodes down the line that may be quirky can be individually
disabled with `-U USE_CC310_HW_CRYPTO`.
2026-07-23 14:02:34 -06:00
Liam Cottle 69c0b954c4 Merge pull request #3023 from agessaman/fix/rx-boosted-gain
fix(room_server): support RX boosted gain
2026-07-23 03:22:41 +12:00
Scott Powell 9f6ab20bbb * build fixes for old ESP32 boards 2026-07-22 19:52:23 +10:00
Scott Powell 37ff90ab95 * build fixes for NullDisplayDriver 2026-07-22 18:55:59 +10:00
Scott Powell 365332205e * refactor of Color mapping in UITasks / DisplayDrivers
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
agessaman 20f7421f72 fix(room_server): support RX boosted gain
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:

- boosted gain was never applied to the radio at boot, so a room server
  ran in power-saving RX mode while an identical repeater ran boosted -
  a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
  0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
  already written the value to prefs and saved them, so a stale setting
  survived reboot and was never applied

Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.

Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
2026-07-21 12:23:20 -07:00
Scott Powell 372281ee8f * optimised: value-init not needed 2026-07-21 19:22:09 +10:00