Commit Graph
3745 Commits
Author SHA1 Message Date
fdlamotte 66d404eac8 Merge pull request #3784 from Maxwell456/feature/repeater-history
Add min/max/avg history queries to repeaters
2026-11-10 12:42:53 -04:00
fdlamotte 1c4b237d73 Merge pull request #3770 from lihardyextreme/feature-mdns
feat: mDNS ESP32 - enable local network discovery over mDNS
2026-11-10 12:07:18 -04:00
fdlamotte 095bd8c311 Merge pull request #3793 from fdlamotte/eink_hibernate_when_off
eink: some updates (busy loop + hibernate when screen off)
2026-11-10 12:00:43 -04:00
Florent 474021f10a eink: some updates (busy loop + hibernate when screen off) 2026-11-10 11:52:38 -04:00
fdlamotte 684d960e6f Merge pull request #3778 from dahuib/rak16000-v1.18.0-clean
Support RAK16000 (INA219 at 0x41)
2026-11-10 11:45:43 -04:00
dahuib 6ce010fbfe Support RAK16000 (INA219 at 0x41) on dev 2026-11-10 15:57:32 +01:00
fdlamotte 3e84250e44 Merge pull request #3623 from BeGiBue/feature/wio-l1-eink-repeater
Add repeater environment for Wio Tracker L1 E-Ink
2026-11-10 09:06:45 -04:00
fdlamotte 41540f1642 Merge pull request #3664 from Martin-hub1/dev
Add DFRobot LoRaWAN ESP32-S3 Companion BLE firmware
2026-11-10 09:06:07 -04:00
fdlamotte 98cfba42b9 Merge pull request #3613 from agessaman/feat/rak13302-auto-onboard-sleep
feat(rak3401): automatically sleep the RAK4631’s onboard SX1262 when paired with a RAK13302
2026-11-10 09:01:51 -04:00
fdlamotte be36c02d5b Merge pull request #3724 from akalinin-softvelum/feature/eink-busy-hook-v2
companion: keep mesh/BLE running during e-ink refresh
2026-11-10 08:40:43 -04:00
fdlamotte 8d56dcc877 Merge pull request #3725 from Blake-Latchford/fix/espnow-no-lora-build
Fix Generic_ESPNOW_* builds on boards without a LoRa radio
2026-11-10 08:25:37 -04:00
fdlamotte d4fcba9dd0 Merge pull request #3648 from olimexsmart/feature/lilygo-t3-stm32
Add LilyGO T3 STM32 support
2026-11-10 08:23:03 -04:00
fdlamotte f40e13a425 Merge branch 'dev' into feature/lilygo-t3-stm32 2026-11-10 08:22:52 -04:00
fdlamotte 16d4cbfd1d Merge pull request #3762 from wmacgreg/feature/nucleo-wl55jc
Add variant for ST Nucleo-WL55JC1 (STM32WL55JC) 🤖🤖
2026-11-10 08:14:51 -04:00
fdlamotte 8b16d8eb5e Merge pull request #3785 from AlexandrTyshchenko/feature/companion-adc-multiplier
Companion: set/get adc.multiplier CLI command
2026-11-10 08:11:33 -04:00
fdlamotte 822bea7b7c Merge pull request #3753 from fdlamotte/gps_refactor
Big GPS refactor
2026-11-10 07:44:00 -04:00
fdlamotte 41eb344511 Merge pull request #4 from AlexandrTyshchenko/feature/gps-guard-refactor
GPS: optional anti-spoofing guard for position and time (GPS_GUARD)
2026-11-09 18:02:06 -04:00
Olexandr Tyshchenko 3da13dd91a GPS guard: gps guard on/off, saved in the GPS prefs 2026-11-09 23:50:48 +02:00
fdlamotte 8363b347b7 Merge pull request #3 from AlexandrTyshchenko/feature/gps-baud-autodetect-refactor
NmeaGpsDriver: optional UART baud rate detection from a per-board list
2026-11-09 17:38:29 -04:00
Olexandr Tyshchenko 6291f9156a GPS guard: save gps fence in the GPS prefs 2026-11-09 23:16:29 +02:00
Olexandr Tyshchenko ca5ccddc85 NmeaGpsDriver: baud rates to probe come from the board, not a build flag 2026-11-09 22:59:47 +02:00
Olexandr Tyshchenko faabf34950 GpsGuard: let GPS correct a clock outside the plausible window 2026-11-09 22:54:18 +02:00
Olexandr Tyshchenko f5cbc18b83 GPS guard: drop time force, it goes to a separate PR 2026-11-09 22:30:24 +02:00
Olexandr Tyshchenko 1c9adb46cb GpsGuard: do not show a stale time ok without a current trusted fix 2026-11-09 22:15:45 +02:00
Olexandr Tyshchenko 6b3da8a2b1 GPS: optional anti-spoofing guard for position and time (GPS_GUARD)
A spoofed GPS signal can move a fixed node anywhere and set its clock to
any time; the clock only moves forward, so a time pushed into the future
breaks timestamps and replay protection until fixed by hand.

With GPS_GUARD, MicroNMEALocationProvider asks a GpsGuard before a fix is
stored as the last fix (satellites, HDOP, optional region box, fence
around the configured position, jump speed, N stable fixes) and before
GPS time is written to the clock (trusted fix current, not before the
build date, small steps once the clock is valid, drift-sized after the
first sync). Without a trusted fix no live position is reported.

CLI in CommonGpsPrefs: 'gps guard', 'gps guard accept', 'gps fence',
'gps ref'; CommonCLI keeps the reference on set lat/lon and gps setloc,
resets the time anchor on manual clock sets and adds 'time force'.

Ported from #3736 onto the GpsDriver/LocationProvider refactor.
2026-11-09 20:43:09 +02:00
Olexandr Tyshchenko 978f2662c6 NmeaGpsDriver: optional UART baud rate autodetection (GPS_BAUD_AUTODETECT)
Bytes arriving on the UART does not mean the baud rate is right: at the
wrong rate the parser only sees garbage and never gets a fix. Modules
such as the M5Stack GROVE GPS now default to 115200, while boards
configure 9600.

With GPS_BAUD_AUTODETECT, detect() probes common GNSS rates, starting
with the configured one, and keeps the first one that yields an NMEA
sentence with a valid checksum. The rate is stored in the driver, so
later power cycles reopen the UART with it. Without the flag nothing
changes.

Ported from #3729 onto the GpsDriver refactor.
2026-11-08 23:24:29 +02:00
Olexandr Tyshchenko 3f23ba9b2d Companion: set/get adc.multiplier CLI command, persisted in prefs
Repeaters, room servers and sensors already let the battery ADC multiplier be tuned with 'set adc.multiplier' (CommonCLI). The companion firmware had no equivalent, so a board whose divider differs from the build default (common on DIY ProMicro / Faketec boards) always reported a wrong battery voltage.

Adds the same command to the companion CLI. The value is stored in the companion prefs (comp.adc_mult, 0 = board default) and applied at startup via MainBoard::setAdcMultiplier().
2026-11-08 18:07:58 +02:00
Maxwell 64f75005b5 Add min/max/avg history queries to repeaters
Move TimeSeriesData from simple_sensor into src/helpers and drive it with
monotonic uptime, so RTC changes cannot stall recording or break queries.
Keep the old RTCClock* overloads as deprecated for custom sensor sketches.

Record 24h of battery, noise floor, TX/RX airtime % and MCU temperature on
repeaters and answer the existing 0x04 min/max/avg request using the same
format as sensor nodes. No packets are sent by this feature.
REPEATER_HISTORY_SLOTS=0 removes it; default off on STM32/RP2040.

Add native tests for TimeSeriesData and document the request and channels.
2026-11-08 16:34:54 +02:00
Martin Boissonneault 017005d1cf rak4631: let the serial GPS switch the WB_IO2 rail (opt-in)
On a RAK19007 the RAK12501's supply is 3V3_S, switched by WB_IO2, so
gps off, periodic mode and shutdown left it powered. Pass WB_IO2 to the
NMEA driver as peripheralPower under GPS_RAIL_POWER_CONTROL, set by the
new RAK_4631_repeater_gps_power env. It is opt-in because the rail feeds
every slot module, and refused with ETHERNET_ENABLED (RAK13800).

The RAK12500 (I2C) driver keeps switching its own power pin, so this
only applies on the NMEA path.

RefCountedDigitalPin now sets OUTPUT on claim and release: WB_IO2 left
as an input (as probeRak12500() leaves it after a failed probe) keeps
3V3_S in its last state, so writing the latch alone did not cut it.

Measured with a KM003C, battery and panel out: gps off 40.5 -> 12.4 mA,
shutdown 29.7 -> 1.30 mA.
2026-11-08 08:47:35 -04:00
Florent b2e46335e5 ui_task: let user choose if enter in gps screen toggles or triggers gps 2026-11-08 08:47:35 -04:00
Florent 6b34ae96df gps: Rework the CLI
- more consistency with other cli commands
- new format for gps fix
- gps format accepts postfix (s/m/d/h)
- documentation
2026-11-08 08:47:35 -04:00
Florent 93d165dd8c gps: once command 2026-11-08 08:47:35 -04:00
Florent 539b55b772 gps: move detection into LocationProvider, remove the legacy constructor 2026-11-08 08:47:34 -04:00
Florent d41aee832e gps: guard the clock sync against stalled and too old fixes 2026-11-08 08:47:34 -04:00
Florent a134188c62 gps: serial pin and configuration fixes (nrf52, meshadventurer, tracker_v1, heltec_tracker) 2026-11-08 08:47:34 -04:00
Níckolas Goline bd21096ce0 muzi_base: fix GPS UART pins and re-enable ATGM336H NMEA output
The refactor no longer calls Serial1.setPins() on nRF52, so Serial1 uses
PIN_SERIAL1_RX/TX directly. Those were swapped (the GPS transmits on
P0.20), so no data was received. Fix them and define PIN_GPS_TX/RX by the
gps module's side, as other variants do.

The ATGM336H keeps its NMEA output config across power cycles, and other
firmware may leave every sentence disabled. Re-enable GGA + RMC after each
power-up.
2026-11-08 08:47:34 -04:00
Florent 47959b8960 gps: fix_stats command 2026-11-08 08:47:34 -04:00
Florent 5303703750 gps: adapt ui-new and the sensor managers 2026-11-08 08:47:34 -04:00
Florent a0c5854b59 rak_gps: simplify the rak driver, which now only handles i2c, for nmea use nmea driver directly 2026-11-08 08:47:34 -04:00
Florent e9d197cf79 gps: periodic acquisition rules (timeout, sats and settle time), isEnabled renamed isActive 2026-11-08 08:47:34 -04:00
Florent e58be9ab11 gps: cache the last fix in LocationProvider (isValid vs hasValidFix), fix and status commands 2026-11-08 08:47:34 -04:00
Florent dea38936d7 gps: move the gps CLI to GpsPrefs and convert all targets 2026-11-08 08:47:34 -04:00
Florent 81afafcb35 gps: add GpsDriver, handle the hardware and software switches in the drivers 2026-11-08 08:47:34 -04:00
Liam Cottle 9f10793f7a Merge pull request #3782 from anders-dc/fix/null-serial-on-boot-overwrite
Fix null _serial dereference when contacts are overwritten during boot
2026-11-09 01:02:31 +13:00
anders-dc 2f00b0e83a fix(companion): guard null _serial in contact overwrite and full callbacks 2026-11-08 11:01:05 +01:00
Liam Cottle 5c40bf745a Merge pull request #3780 from Blake-Latchford/docs/contributing-merge-factors
Incorporate PR Backtesting into CONTRIBUTING.md
2026-11-08 19:06:54 +13:00
Liam Cottle 9ea4b83ed1 Merge pull request #3637 from marcelverdult/upstream-candidate/meshtracker-x1-micronmea-dep
Fix MeshTracker X1 kiss_modem build: inherit MicroNMEA in every environment
2026-11-08 18:38:24 +13:00
fdlamotte 4b4f1b25ef Merge pull request #3774 from recrof/rpi2350-support
added rp2350 support, harmonized companions with other variants
2026-11-07 15:57:37 -04:00
Blake Latchford 02081ba500 Incorporate PR Backtesting into CONTRIBUTING.md
I used an LLM to review what changes the likelihood of a PR getting merged. I then asked it to select potential changes based on its findings. I selected from those options and carefully guided the LLM to produce several pull requests. I fed the subset of PRs that failed back into the skill and discovered additional missing factors.
2026-11-07 10:31:14 -05:00
ripplebiz 7474e0c036 Merge pull request #3496 from agessaman/feat/kiss-agc-fem-control
KISS modem: AGC, FEM gain and RX boosted gain control
2026-11-07 18:03:40 +11:00