taco
7fbac66a33
LR1110: fix unnecessary IRQ clear
2026-07-29 23:18:15 +10:00
ripplebiz
12476c3684
Merge pull request #3062 from oltaco/fix-irq-clear
...
Fix unnecessary IRQ clearing
2026-07-29 22:37:30 +10:00
taco
0f543ccc34
fix unnecessary IRQ clear
2026-07-29 21:39:56 +10:00
Liam Cottle
31a5fe838a
Merge pull request #3048 from entr0p1/fix/startota-failure-recovery
...
nRF52840 "start ota" Failure Recovery
2026-07-28 15:36:48 +12:00
entr0p1
d4ee0fc4eb
nRF52840 "start ota" Failure Recovery
...
If Bluefruit.begin fails, BLE OTA mode won't actually start and the board might require a reboot to reattempt.
Fixes:
- Bluefruit.begin returns false in NRF52Board.startOTAUpdate if OTA mode fails to start. User is notified of the fault through existing error message in CommonCLI and can reattempt "start ota" command.
2026-07-28 10:14:59 +10:00
ripplebiz
86cf57b4e7
Merge pull request #2982 from meshcore-dev/config-serializer
...
Config serializer
2026-07-27 17:58:03 +10:00
ripplebiz
f2e46925e6
Merge pull request #3034 from meshcore-dev/ui-color-refactor
...
UI color refactor
2026-07-27 17:45:12 +10:00
Liam Cottle
4d9d44065a
Merge pull request #3040 from blowfishpro/docs/FixPayloadDocsFormatting
...
Increase header levels on "Payloads" documentation page to fix table of contents
2026-07-27 14:13:09 +12:00
Talia
9d2343e06f
docs: increase header levels on payloads page to fix table of contents
...
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents
this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
2026-07-26 15:55:27 -07:00
ripplebiz
6aaea1ecbe
Merge pull request #3036 from oltaco/add-preamble-irq-flag
...
Fix missing PREAMBLE_DETECTED IRQ flag for all radio wrappers
2026-07-25 01:40:19 +10:00
taco
fd3639dd4e
SX1268: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:39 +10:00
taco
a04833f029
STM32WLx: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:39 +10:00
taco
15edc9e9e9
LLCC68: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:39 +10:00
taco
04b643b21a
LR1110: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:36 +10:00
taco
11a0236c2c
SX1262: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:38:44 +10:00
Scott Powell
1d4e21c89f
* T114 display fix
2026-07-24 18:35:56 +10:00
Scott Powell
b6ff4ad43f
* fixed for mono ST7789 display driver
2026-07-24 15:31:22 +10:00
Scott Powell
c194f52916
* monochrome displays now do _not_ invert titlebar
2026-07-24 15:14:56 +10:00
Scott Powell
cfb7d156e9
Merge branch 'dev' into config-serializer
...
# Conflicts:
# test/mocks/Arduino.h
# test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Liam Cottle
c5c78d37bd
Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276
...
Increase LilyGo T-Beam SX1276 channels from 8 to 40
2026-07-24 15:34:19 +12:00
liamcottle
77244ce4a6
increase tbeam sx1276 max group channels from 8 to 40
2026-07-24 15:31:01 +12:00
Liam Cottle
b057f40b53
Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
...
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Liam Cottle
69c0b954c4
Merge pull request #3023 from agessaman/fix/rx-boosted-gain
...
fix(room_server): support RX boosted gain
2026-07-23 03:22:41 +12:00
Scott Powell
9f6ab20bbb
* build fixes for old ESP32 boards
2026-07-22 19:52:23 +10:00
Scott Powell
37ff90ab95
* build fixes for NullDisplayDriver
2026-07-22 18:55:59 +10:00
Scott Powell
365332205e
* refactor of Color mapping in UITasks / DisplayDrivers
...
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
agessaman
20f7421f72
fix(room_server): support RX boosted gain
...
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:
- boosted gain was never applied to the radio at boot, so a room server
ran in power-saving RX mode while an identical repeater ran boosted -
a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
already written the value to prefs and saved them, so a stale setting
survived reboot and was never applied
Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.
Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
2026-07-21 12:23:20 -07:00
Scott Powell
372281ee8f
* optimised: value-init not needed
2026-07-21 19:22:09 +10:00
ripplebiz
2efeea7666
Merge pull request #3005 from axhoff/agent/fix-ble-reconnect
...
Fix bonded BLE reconnects on ESP32
2026-07-21 19:17:34 +10:00
ripplebiz
7ce6536fac
Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue
...
Synchronize the ESP32 BLE receive queue
2026-07-21 18:10:37 +10:00
ripplebiz
a62d05970b
Merge pull request #3006 from axhoff/agent/fix-heltec-v4-usb-companion
...
Enable hardware USB serial on Heltec V4
2026-07-21 17:54:22 +10:00
Liam Cottle
06d660bf86
Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c
...
Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)
2026-07-21 19:17:32 +12:00
Alexander Hoffer
299e921549
refactor: use FreeRTOS BLE receive queue
2026-07-21 07:17:01 +01:00
=UltimateCodeWarrior
1dd58e3b49
Move Supreme OLED address to variant config
...
Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.
2026-07-20 19:24:38 -07:00
fdlamotte
79e06eaf99
Merge pull request #2887 from spinda/thinknode-m3-dev
...
Fix GPS and LEDs on ThinkNode M3
2026-07-20 17:42:30 -04:00
fdlamotte
81a24084de
Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals
...
NRF52Board - ShutdownPeripherals() housekeeping
2026-07-20 11:53:56 -04:00
Alexander Hoffer
ef45704c53
fix: preserve bonded BLE reconnects
2026-07-20 15:47:03 +01:00
Alexander Hoffer
c7531c4502
fix: enable Heltec V4 USB serial
2026-07-20 15:47:03 +01:00
Alexander Hoffer
65e14d5bd9
fix: synchronize BLE receive queue
2026-07-20 15:47:03 +01:00
Liam Cottle
0f98c46556
Merge pull request #2990 from entr0p1/fix/xiao-nrf52-userbtn
...
Fix Xiao nRF52840 repeater compile failure
2026-07-21 02:09:33 +12:00
entr0p1
5920b28f33
Fix Xiao nRF52840 repeater compile failure
...
Compile fails due to user_btn not declared in board target.
Fixes:
- Add MomentaryButton declaration for user_btn in variants/xiao_nrf52/target.cpp
- Add momentary button helper include in variants/xiao_nrf52/target.h
- Add extern linkage for MomentaryButton -> user_btn in variants/xiao_nrf52/target.h
2026-07-20 22:43:25 +10:00
Liam Cottle
2a38f3f364
Merge pull request #3000 from oltaco/rx-irq-timeout
...
fix: clear the correct IRQ flag for timeout on preamble detected on SX1262
2026-07-20 23:32:12 +12:00
taco
3bcb2c7477
fix: clear the correct IRQ flag for timeout on preamble detected
2026-07-20 21:05:12 +10:00
Liam Cottle
62de21a5e4
Merge pull request #2998 from oltaco/heltec-t1-bodmer
...
Fix: Heltec t1: add missing bodmer TFT_eSPI library
2026-07-20 22:39:17 +12:00
taco
172b0d44b0
fix: heltec t1: add missing bodmer TFT_eSPI library
2026-07-20 20:28:38 +10:00
Liam Cottle
b307f68a88
Merge pull request #2994 from oltaco/rx-irq-timeout
...
Add setter methods for preambleMillis and maxPayloadMillis on SX1262 and LR1110
2026-07-20 22:07:36 +12:00
taco
98448b4463
LR1110: add setter methods for preambleMillis and payloadMillis
2026-07-20 19:52:57 +10:00
taco
6ff42198bd
SX1262: add setter methods for preambleMillis and payloadMillis
2026-07-20 19:52:57 +10:00
Liam Cottle
41e85c5851
Merge pull request #2989 from rgregg/fix-nrf52-ethernet-build
...
Fix nRF52 builds broken by unconditional RAK Ethernet include
2026-07-20 20:58:26 +12:00
liamcottle
22b2de711c
Merge remote-tracking branch 'official/main' into dev
2026-07-20 20:42:09 +12:00