Commit Graph
929 Commits
Author SHA1 Message Date
ripplebiz 86cf57b4e7 Merge pull request #2982 from meshcore-dev/config-serializer
Config serializer
2026-07-27 17:58:03 +10:00
ripplebiz f2e46925e6 Merge pull request #3034 from meshcore-dev/ui-color-refactor
UI color refactor
2026-07-27 17:45:12 +10:00
Scott Powell 1d4e21c89f * T114 display fix 2026-07-24 18:35:56 +10:00
Scott Powell cfb7d156e9 Merge branch 'dev' into config-serializer
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Liam Cottle b057f40b53 Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Scott Powell 9f6ab20bbb * build fixes for old ESP32 boards 2026-07-22 19:52:23 +10:00
Scott Powell 365332205e * refactor of Color mapping in UITasks / DisplayDrivers
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
agessaman 20f7421f72 fix(room_server): support RX boosted gain
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:

- boosted gain was never applied to the radio at boot, so a room server
  ran in power-saving RX mode while an identical repeater ran boosted -
  a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
  0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
  already written the value to prefs and saved them, so a stale setting
  survived reboot and was never applied

Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.

Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
2026-07-21 12:23:20 -07:00
ViezeVingertjesandAdam Gessaman 5614deb63f fix: guard HWCDC serial config behind ARDUINO_USB_MODE
setTxTimeoutMs() and setTxBufferSize() are HWCDC-only APIs; calling
them on HardwareSerial (UART-bridge boards like T-Beam) fails to compile.

Co-Authored-By: Adam Gessaman <adam@gessaman.com>
2026-07-18 22:43:55 +02:00
ViezeVingertjes 2679fa8ebc fix: prevent ESP32 KISS modem stalls under USB backpressure
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
Scott Powell c34c368e3f * RP2040 build fixes
* new prefs file now "/prefs.json"
2026-07-18 20:12:21 +10:00
Scott Powell 10434a1cfd * added prefs initialisers to match original zeroed state 2026-07-18 19:22:53 +10:00
ripplebiz c289e500d5 Merge pull request #2966 from Quency-D/heltec-rc32
Add Heltec rc32 board
2026-07-17 23:23:29 +10:00
Florent 59d845c44d uitask: screen and radio poweroff moved to board 2026-07-17 08:29:31 -04:00
fdlamotte 1b929311c4 Merge branch 'dev' into repeater_btn 2026-07-17 06:55:19 -04:00
Quency-D 89856d934a Avoid waking display from rotary input 2026-07-17 15:35:07 +08:00
Scott Powell f665188266 * new NodePrefs for companion 2026-07-17 16:05:10 +10:00
Scott Powell 0b77e07d30 Merge branch 'dev' into config-serializer 2026-07-16 17:22:28 +10:00
Quency-D 6a651edbfe Add a rotary encoder 2026-07-15 17:45:24 +08:00
ripplebiz f1b84898a6 Merge pull request #1983 from rgregg/rak-ethernet
Support for RAK ethernet module
2026-07-15 18:53:38 +10:00
Jaroslav Škarvada 75235de0fd Added MCU temp sensor to the companion
Fixes #2896
2026-07-14 17:43:33 +02:00
Scott Powell a4e7cdf4f3 * first draft of new ConfigSerializer. (simple embedded JSON prefs) 2026-07-15 01:23:57 +10:00
Quency-D 72afb0256f Remove the watchdog feeding operation from each iteration of the loop to reduce power consumption. 2026-07-14 17:23:13 +08:00
Ryan Gregg 3ba5de20f6 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Alex Beal 54ccedefdb Merge branch 'dev' into pr-1446 2026-07-12 15:44:28 -06:00
Florent e4738d125e restore display and radio poweroff in ui 2026-07-06 08:46:57 -04:00
Florent aea3ba3fdb repeater: poweroff on long press 2026-07-06 08:40:56 -04:00
Kevin Le f4cd0d24f5 board->powerOff() is sufficient to power off radio, display, GPS and components 2026-07-05 21:22:13 +07:00
Quency-D 1a1239844c Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Neil Alexander ea95fa0ad6 Fix recv_pkt_region incorrect usage
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.

`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
2026-07-02 09:28:41 +01:00
Liam Cottle 2bb7495356 Merge pull request #2639 from sefinek/fix/typos-in-comments
fix: fix typos in source code comments
2026-06-27 11:26:54 +12:00
taco 1a90abdbe2 return bool when setting rx boost 2026-06-26 07:44:01 +10:00
taco e076cd4e3d remove guard on MyMesh::setRxBoostedGain() 2026-06-26 07:06:37 +10:00
Ryan Gregg 7f1ecc2045 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
#	examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00
Wessel Nieboer e77b6b101f Have CAD be a separate toggle (set cad on/off) 2026-06-14 15:20:58 +02:00
Wessel Nieboer 720cd75167 Use hardware channel activity detection for checking interference 2026-06-14 15:19:18 +02:00
Scott Powell e2a00e664e * fix for anon lastmod 2026-06-14 18:54:51 +10:00
Scott Powell 03dce189f1 * fix for anon contacts when full 2026-06-14 17:50:41 +10:00
Quency-D 06e7d0f282 Restore companion NodePrefs file ending 2026-06-13 17:40:11 +08:00
Quency-D 4e6e909f7e Remove companion FEM RX gain command IDs 2026-06-13 17:31:54 +08:00
Quency-D 606f8f1cc3 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
liamcottle 145d50bda9 use releasePacket instead of _mgr->free 2026-06-09 00:42:58 +12:00
liamcottle 309ed80fa6 free packet on parse failure 2026-06-09 00:31:48 +12:00
Scott Powell f4d0485dd6 * version 1.16.0 2026-06-06 21:09:38 +10:00
Scott Powell a4c1981e6a * default now 8, per the will of the peoples. 2026-06-06 21:00:58 +10:00
Scott Powell d66597c3e7 * new CLI config: flood.max.advert (default 16) 2026-06-06 13:09:24 +10:00
Liam Cottle cfe27b3a6f Merge pull request #2672 from meshcore-dev/non-contact-requests
Non contact requests
2026-06-04 16:05:47 +12:00
Liam Cottle 1ca66e4cd4 Merge pull request #2671 from sefinek/fix/typos-grammar-formatting
Fix typos and formatting in documentation and comments
2026-06-04 15:57:48 +12:00
ripplebiz 3c9b234c73 Merge pull request #2663 from oltaco/no-autoshutdown-when-powered
Disable auto-shutdown when externally powered, add auto-shutdown warning for OLED displays
2026-06-04 13:42:00 +10:00
ripplebiz cb497c50c2 Merge pull request #1687 from IoTThinks/MCdev-PowerSaving-for-all-esp32-repeaters-202602
Added PowerSaving for all ESP32-based repeaters
2026-06-04 13:31:51 +10:00