Commit Graph
279 Commits
Author SHA1 Message Date
tthandClaude Opus 5.5 81d7f600d8 Merge main into ota-admin: tools split, WITH_RX_POWERSAVING
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 16:12:20 +01:00
tth 4813340a69 FwUpdate binary: cap the missing-units reply at 150 B (companion frame limit); ota_mesh_push --text 2026-11-13 01:06:06 +01:00
tth 637b0d78b7 FwUpdate: binary firmware chunks over the mesh (REQ_TYPE_FW_OTA 0xF0) 2026-11-13 00:55:06 +01:00
tthandClaude Opus 5.5 b06fd957b9 radio: RX duty cycle (RXPS) from EasySkyMesh PowerSaving v18, opt-in
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 14:57:16 +01:00
tthandClaude Opus 5.5 507842cea2 sensors: INA shunt set at runtime -- sensor set ina.shunt <mOhm>, kept in prefs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 13:58:39 +01:00
tthandClaude Opus 5.5 8d0b0dd164 Merge upstream/dev (80 commits) [upstream-sync]
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 09:22:19 +01:00
Valentin Metz f02d9d9e47 Fix stack-buffer overflow in CLI reply buffers
The remote-CLI reply buffers in onPeerDataRecv() (repeater, room server,
sensor) and BaseChatMesh were sized temp[166] for a 5-byte datagram
header plus 161 bytes of reply. But MyMesh::handleCommand() first
reflects a 3-byte correlation prefix (e.g. 'aa|') into the reply, after
which CommonCLI commands may write up to 160 chars + NUL into the
remaining 158 bytes -- overflowing the buffer by 2 bytes (e.g. a full
'regions' listing via exportTo(reply, 160)).

Triggering this remotely crashes the node (observed as an unresponsive
repeater after a prefixed 'regions' query); the 2 out-of-bounds bytes
are a printable region-name character and a NUL.

Size the buffers for the full worst case instead:
5 header + 3 prefix + 160 reply + 1 NUL = 169.

Verified with a host ASan harness reproducing the exact layout:
prefixed 'regions' with a 25-region listing overflowed temp[166]
(BufStream::write, RegionMap.cpp) and now passes clean with temp[169];
unprefixed (serial) path unaffected.
2026-11-11 05:30:54 +01:00
fdlamotte 16d4cbfd1d Merge pull request #3762 from wmacgreg/feature/nucleo-wl55jc
Add variant for ST Nucleo-WL55JC1 (STM32WL55JC) 🤖🤖
2026-11-10 08:14:51 -04:00
Florent dea38936d7 gps: move the gps CLI to GpsPrefs and convert all targets 2026-11-08 08:47:34 -04:00
Florent 81afafcb35 gps: add GpsDriver, handle the hardware and software switches in the drivers 2026-11-08 08:47:34 -04:00
Will MacGregorandClaude Opus 5 287c5e21cf Enable simple_room_server on the STM32 platform
The room server gated its filesystem paths on NRF52_PLATFORM only, so an
STM32 build fell through to the ESP32 branch and failed to compile:

  MyMesh.cpp:147: no matching function for call to
    'Adafruit_LittleFS::open(const char*&, const char [2], bool)'
  main.cpp:69:   'store' was not declared in this scope

STM32 uses the same InternalFS / Adafruit_LittleFS API as nRF52, including
append semantics (FILE_O_WRITE opens LFS_O_RDWR|LFS_O_CREAT and then seeks
to the end), so the nRF52 branch is already correct for it. Add
STM32_PLATFORM alongside NRF52_PLATFORM in the four remaining gates;
saveIdentity() already did this.

This unblocks the room_server example on the existing STM32WL boards
(wio-e5-mini, wio-e5-dev, rak3x72, tiny_relay) as well as new ones.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-11-04 09:46:27 -05:00
tthandClaude Opus 5.5 a8f0c3dca6 simple_room_server: dfu, radio silence watchdog and get boot via NodeMaintenance
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 01:25:27 +01:00
tthandClaude Opus 5.5 88ef08c6d5 public builds: Czech mesh defaults (meshcore.cz wiki)
pub-release / release (push) Successful in 20m57s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 14:15:14 +01:00
tth 790cf23466 Merge remote-tracking branch 'origin/dev' 2026-10-28 20:29:38 +01:00
Blake LatchfordandClaude Opus 5.5 8e0e5b8110 Saturate duplicate packet stats instead of wrapping
Tested on a Heltec V4 repeater with the counter seeded at 65530.

Fixes #3255

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:45:10 -04:00
upstream-sync-bot 04a6bb3318 Merge upstream/main (20 commits) [upstream-sync] 2026-10-15 11:56:47 +00:00
Scott Powell a4f1601df3 * version 1.18.0 2026-10-15 19:42:01 +11:00
Scott Powell 174582e8a1 * only 'repeat on' now intercepted 2026-10-14 12:21:38 +11:00
Scott Powell 5f2deeb875 * Room: "set repeat" CLI now deprecated 2026-10-14 11:48:58 +11:00
tthandClaude Opus 5.5 107b37b5f4 Merge remote-tracking branch 'origin/dev' into main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-23 18:35:35 +02:00
Scott Powell 0812e09b40 missing board.loop() in companion, room server, kiss modem. 2026-09-22 18:01:15 +10:00
João Brázio dbb2aeee00 Ensure command buffers stay NUL-terminated to prevent overflow
The serial command buffers must stay NUL-terminated within their
bounds: if they ever aren't, strlen() can return >= sizeof(command)
and the read loop would index past the buffer. Additionally, a full
buffer now becomes a completed line (end-of-line marker placed
inside the buffer, NUL terminator kept) instead of overwriting the
terminator and silently corrupting the buffer for the next pass.

Applies to the serial CLI readers of the repeater, room server,
sensor and secure chat examples, and to the CLI rescue reader of
the companion example.
2026-09-04 20:01:39 +01:00
tthandClaude Opus 5 bd60aa4322 Merge remote-tracking branch 'origin/dev' into main
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-02 02:19:04 +02:00
Scott Powell 5a7bc507d1 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
Scott Powell 8c73c948b4 * T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Scott Powell 644e68d0ff * new TXT_TYPE_CLI_COMMAND (3) 2026-08-23 22:04:05 +10:00
tthandClaude Opus 5 906c675b4b fix(mesh): šířku path hashe bere každá TX cesta z prefs uzlu, ne z konstanty
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 18:13:02 +02:00
Scott Powell cad602e416 * version 1.17.1 2026-08-14 22:19:19 +10:00
ripplebiz f8832af086 Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebiz d5949f93d8 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
Scott Powell 68dedd3e96 * version 1.17.0 2026-08-09 15:14:46 +10:00
agessaman 2eb7feffe0 fix(station-g3): expose FEM gain preferences 2026-08-06 15:29:14 -07:00
ViezeVingertjes 34156ddb11 Fix replies dropped when flood.max.unscoped is low 2026-08-03 22:57:12 +02:00
Che177 8762862522 room_server: use standard mesh debug logging 2026-07-28 21:57:42 -07:00
Che177 b9918e6037 room_server: add room.post system posts 2026-07-27 19:50:13 -07:00
ripplebiz 86cf57b4e7 Merge pull request #2982 from meshcore-dev/config-serializer
Config serializer
2026-07-27 17:58:03 +10:00
ripplebiz f2e46925e6 Merge pull request #3034 from meshcore-dev/ui-color-refactor
UI color refactor
2026-07-27 17:45:12 +10:00
Scott Powell cfb7d156e9 Merge branch 'dev' into config-serializer
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Scott Powell 365332205e * refactor of Color mapping in UITasks / DisplayDrivers
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
agessaman 20f7421f72 fix(room_server): support RX boosted gain
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:

- boosted gain was never applied to the radio at boot, so a room server
  ran in power-saving RX mode while an identical repeater ran boosted -
  a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
  0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
  already written the value to prefs and saved them, so a stale setting
  survived reboot and was never applied

Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.

Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
2026-07-21 12:23:20 -07:00
Scott Powell 0b77e07d30 Merge branch 'dev' into config-serializer 2026-07-16 17:22:28 +10:00
Scott Powell a4e7cdf4f3 * first draft of new ConfigSerializer. (simple embedded JSON prefs) 2026-07-15 01:23:57 +10:00
Ryan Gregg 3ba5de20f6 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Quency-D 1a1239844c Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Neil Alexander ea95fa0ad6 Fix recv_pkt_region incorrect usage
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.

`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
2026-07-02 09:28:41 +01:00
Ryan Gregg 7f1ecc2045 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
#	examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00
Wessel Nieboer e77b6b101f Have CAD be a separate toggle (set cad on/off) 2026-06-14 15:20:58 +02:00
Wessel Nieboer 720cd75167 Use hardware channel activity detection for checking interference 2026-06-14 15:19:18 +02:00
Quency-D 606f8f1cc3 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
Scott Powell f4d0485dd6 * version 1.16.0 2026-06-06 21:09:38 +10:00