ViezeVingertjes
b3efbd2b95
Document HW_ERR_TX_BUSY in KISS modem protocol
2026-05-16 11:32:33 +02:00
Liam Cottle
788b8fb14c
Merge pull request #2565 from willumpie82/ble-pin-code
...
Disable BLE_PIN_CODE for E290 companion USB environment
2026-05-15 23:17:43 +12:00
Willem Oldemans
89ccec6a03
Remove static BLE_PIN_CODE definition from Heltec E290_usb configuration
2026-05-15 13:09:59 +02:00
Willem Oldemans
bd7b2e62ee
Disable BLE_PIN_CODE for E290 companion USB environment
...
Remove the hardcoded BLE_PIN_CODE build flag from the Heltec_E290_companion_ble
environment. The presence of BLE_PIN_CODE prevents the unit from operating as a
USB companion. Commenting it out allows dynamic PIN generation and enables USB
companion functionality.
2026-05-15 12:57:36 +02:00
Liam Cottle
f91596bfb2
Merge pull request #2493 from Rococo88/complex-wifi-reconnect
...
Refactor WiFi auto-reconnect to use non-blocking polling
2026-05-15 21:21:16 +12:00
ripplebiz
e674280570
Merge pull request #2497 from oltaco/reduce-esp32-dram
...
Reduce dram0_0 usage on older ESP32 boards
2026-05-15 14:04:42 +10:00
ripplebiz
98c2981987
Merge pull request #2515 from Cisien/station-g3-esp32
...
Add support for Station G3 and its software configurable LNA/PA1
2026-05-15 13:58:42 +10:00
Liam Cottle
13a04f2dc9
Merge pull request #2543 from meshcore-dev/cmd-send-raw
...
new CMD_SEND_RAW_PACKET
2026-05-13 22:10:52 +12:00
Scott Powell
efa0f86fa7
* new CMD_SEND_RAW_PACKET
2026-05-13 13:28:56 +10:00
Huw Duddy
06a5242ddc
Merge pull request #2536 from recrof/patch-3
...
revert: "feat: Enable GPS on RAK 1W kit" (#2401 )
2026-05-13 00:41:41 +10:00
Rastislav Vysoky
266eb349d4
revert: "feat: Enable GPS on RAK 1W kit" ( #2401 )
...
reverted changes to RAK_BOARD and PIN_GPS_EN. setting `RAK_BOARD` would cause radio to stop working and end with RadioLib error -707
2026-05-12 15:56:28 +02:00
liamcottle
af230c7be5
fix gps pins for lilygo t impulse plus
2026-05-12 10:36:19 +12:00
Liam Cottle
e3426309e7
Merge pull request #2522 from liamcottle/board/lilygo-t-impulse-plus
...
Add support for LilyGo T-Impulse-Plus
2026-05-12 01:39:44 +12:00
liamcottle
f4b31d3e51
turn off 3.3v rail when powering off
2026-05-12 01:06:22 +12:00
Liam Cottle
431133a39d
Merge pull request #2520 from Quency-D/heltec-mesh-node-t1
...
add heltec-mesh-node-t1
2026-05-12 00:38:14 +12:00
liamcottle
29c5f33079
fix battery voltage reading
2026-05-11 22:17:53 +12:00
liamcottle
57dad2393a
initial support for lilygo t impulse plus
2026-05-11 22:05:06 +12:00
Liam Cottle
881e0cf1db
Merge pull request #2519 from oltaco/customlfs-0.2.2
...
pin CustomLFS to version 0.2.2
2026-05-11 21:33:05 +12:00
Quency-D
e9b8926155
add heltec-mesh-node-t1
2026-05-11 15:11:07 +08:00
taco
f195d93392
pin CustomLFS to version 0.2.2
...
CustomLFS 0.2.2 adds support for the flash chip in LilyGo T-Echo Card and T-Echo Lite
2026-05-11 11:37:56 +10:00
Huw Duddy
a73dcdfd87
Merge pull request #2503 from jirogit/fix/techo-lite-non-shell-usb
...
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-10 22:40:12 +10:00
Liam Cottle
93b77513b4
Merge pull request #2516 from oltaco/disable-ds3231-probe
...
Add option to disable DS3231 RTC probe
2026-05-10 22:48:47 +12:00
taco
56672fc61e
add option to disable DS3231 probe
2026-05-10 20:29:47 +10:00
Huw Duddy
43e8282a5f
Merge pull request #2511 from entr0p1/techo-lite-rf-fix
...
Corrected T-Echo Lite SX1262 RXEN and TXEN pins, TCXO voltage.
2026-05-10 19:55:20 +10:00
Chris
9078a822f7
Add support for Station G3 and its software configurable LNA and PA1
2026-05-09 13:53:20 -07:00
entr0p1
5f59a5b7fc
T-Echo Lite LoRa radio fixes
...
- Set TCXO voltage to 1.8 (not defined previously, falls back to default)
- Set correct variable name for SX1262 RX/TX pins
- Fix SX1262 RX pin number
2026-05-09 14:26:55 +10:00
Liam Cottle
13684f9212
Merge pull request #2490 from tuzzmaniandevil/dev
...
Enhance KissModem frame processing and timeout handling
2026-05-08 23:23:14 +12:00
Huw Duddy
5a4600e7ae
Merge pull request #2505 from liamcottle/feature/companion-repeat-build-flag
...
Add build flag to configure allowed repeat frequency range
2026-05-08 18:29:49 +10:00
liamcottle
f35f5b9b5e
add build flag to configure allowed repeat freq range
2026-05-08 20:16:45 +12:00
jirogit
81936fa398
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-08 00:38:04 -07:00
tuzzmaniandevil
6865daea8f
Address two comments from PR
2026-05-08 11:14:22 +12:00
taco
0a330ffee2
reduce dram0_0 usage by lowering OFFLINE_QUEUE_SIZE
...
some older ESP32 boards were pushing the limits of the dram segment causing the linker to fail, especially for ble and wifi firmwares.
lowering OFFLINE_QUEUE_SIZE reduces dram usage
2026-05-08 00:40:33 +10:00
Liam Cottle
62f7c7f1fc
Merge pull request #2494 from uwl-cpe-2025/fix/missing-include
...
Add missing Wire.h include to sensors
2026-05-08 00:38:33 +12:00
Josiah VanderZee
8b192bd4c3
Add missing Wire.h include for sensors
...
This slipped through in PR #2327 and I noticed because the TechoBoard.h
for my variant doesn't include the Wire header, so the source file
in question does not coincidentally obtain a copy.
2026-05-07 07:20:48 -05:00
Rococo88
49d7e91ed2
Refactor WiFi auto-reconnect to use non-blocking polling
2026-05-07 12:24:06 +02:00
Liam Cottle
b9ed6da4c1
Merge pull request #2492 from meshcore-dev/set-flood-scope-none
...
Companion: Set flood scope to None
2026-05-07 21:49:11 +12:00
Scott Powell
f63fdc0ad4
* CMD_SET_FLOOD_SCOPE_KEY, now with second variant for explicitly sending un-scoped
...
* FIRMWARE_VER_CODE bumped to 12
2026-05-07 16:51:03 +10:00
Liam Cottle
3ac2ddd02f
Merge pull request #2488 from weebl2000/fix-rak-pin-gps-en-undefined
...
Gate PIN_GPS_EN
2026-05-07 18:44:37 +12:00
ripplebiz
faa3392d0b
Merge pull request #2327 from NickDunklee/fix-environment-sensor-refactor
...
fix(sensors): improve sensor initialization and handling to prevent hangs and handle growth
2026-05-07 15:58:10 +10:00
tuzzmaniandevil
cba90a82f2
Enhance KissModem frame processing and timeout handling
2026-05-07 00:03:09 +00:00
Wessel Nieboer
b18109b9d2
Gate PIN_GPS_EN
...
Do not reference it unconditionally
2026-05-07 00:31:15 +02:00
Huw Duddy
a9809aa731
Merge pull request #2483 from oltaco/dev
...
fix CustomLFS version pinning
2026-05-06 23:59:51 +10:00
taco
0a3d15b1f1
fix CustomLFS version pinning
2026-05-06 23:53:35 +10:00
Liam Cottle
2a231ea63b
Merge pull request #2480 from KPrivitt/dev
...
Incorrect time_t TypeDef used in RAK12035_SoilMoisture
2026-05-06 17:46:57 +12:00
ripplebiz
974297bf7d
Merge pull request #2445 from kizniche/update-docs-txdelay-rxdelay
...
Docs: Add explanatory notes for txdelay, direct.txdelay, and rxdelay
2026-05-06 14:37:36 +10:00
ripplebiz
43cb64f892
Merge pull request #2475 from uwl-cpe-2025/fix/ST7789-reset-timing
...
Do not perform redundant reset on ST7789 displays
2026-05-06 14:32:30 +10:00
Kenneth Privitt
76a1cb1710
Incorrect time_t TypeDef in RAK12035_SoilMoisture
2026-05-05 11:20:36 -07:00
Josiah VanderZee
102dbf536d
Do not perform redundant reset on ST7789 displays
...
The `::init` method in the Adafruit ST7789 library is responsible to
initialize the device. This includes performing a reset, which can be
found in the Adafruit source for `Adafruit_SPITFT`.
Before this change, MeshCore performed its own ST7789 display reset
sequence, which consisted of three steps.
* Pull reset low
* Wait 10ms
* Pull reset high
Importantly, there was no fixed delay after pulling reset high. The
ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode
and 120ms in Sleep Out Mode before it will properly receive commands.
When `Adafruit_SPITFT` resets the device after MeshCore has already
reset it, the mandatory time may not have elapsed, leading to strange
behavior. In the author's case, this issue caused the initial
`fillScreen` to fail, such that the display showed an uninitialized
framebuffer.
This removes the MeshCore delay, leaving the responsibility of reset to
`Adafruit_SPITFT`, where they have the correct delays in place with
extra safety margin. The change was briefly tested by Josiah VanderZee
and Ben Zignego on a custom hardware build using an nRF52840 Dongle and
an Adafruit 4311 TFT display. The user button seemed to behave
strangely, but the display looked correct.
2026-05-04 17:01:39 -05:00
Liam Cottle
093f2a68dc
Merge pull request #2462 from meshcore-dev/target-dup-cleanup
...
Refactor: removed duplicated target code
2026-05-02 17:21:51 +12:00
Liam Cottle
2974793192
Merge pull request #2460 from liamcottle/ui/startup-mute
...
Don't play startup tune if buzzer pref disabled
2026-05-02 02:24:37 +12:00