Commit Graph
2847 Commits
Author SHA1 Message Date
Nick Dunklee b5cb2a7e61 8 hour save window, LP, 28 day calibration window 2026-05-28 18:35:22 -06:00
Nick Dunklee 24d2815c9c Am idiot, and deleted some of the adafruit code path
I put it back and test-compiled a few builds.
2026-05-27 16:28:15 -06:00
Nick Dunklee a54b11dd50 feat: Integrate BME680 Bosch BSEC support for RAK4631
This is a consolidation of my changes for BME680 on RAK4631 nodes.
I will close my other PRs related to this and link back to this one.

*Background on change:*

This change replaces the Adafruit BME680 driver on RAK4631 with the
Bosch BSEC library. Other boards continue to use the existing
Adafruit path via ENV_INCLUDE_BME680.

This makes the IAQ portion of the sensor functional, and more accurate.
It also contains the math and/or CayenneLPP fixes from my other PRs.
The Bosch code also appears to handle calibrating sensor aging as well,
whereas the Adafruit code is just looking at blind values that can drift
with time. Pretty cool to see this shooting out useful data!

RAK4631 platform.io is set to override to ENV_INCLUDE_BME680_BSEC while
leaving the Adafruit code for other node types. (If this becomes applicable
for other node types in future, awesome! I just don't have hardware
to test against.)

Using the BSEC library introduces IAQ sensor calibration, and saves
the calibration state periodically so it does not have to calibrate
again later.

At startup the IAQ sensor takes 30 minutes to heat and to hit a baseline,
then starts calibrating. Once calibrated, it will save those settings
and will only write settings again if calibration falls back and restores
back to state 3.

This fix also has the gas resistance math fix that was in
[pull 2146](https://github.com/meshcore-dev/MeshCore/pull/2146) so
the adafruit path also can at least show accurate values instead
of looping negative.

Also includes the fix from [pull 2149](https://github.com/meshcore-dev/MeshCore/pull/2149) so the pressure output isn't truncated to 1hPa steps.

*Fixes/Changes:*
- Add bsec_config_iaq[] with the 3.3V/3s-LP/28d calibration profile
- BSEC init applies setConfig() for voltage-correct heater targeting
- IAQ, heat-compensated temperature/humidity, pressure, and altitude
  reported over CayenneLPP
- IAQ accuracy reported as analog input over CayenneLPP (0,1,2,3)
- Calibration state persisted to /bsec_state.bin on nRF52 internal
  flash; written only when iaqAccuracy improves to >= 2, should
  keep write frequency well within flash endurance over device lifetime
- Fix non-BSEC query_bme680: float pressure division, addGenericSensor
  for gas resistance (was addAnalogInput, overflows at > 327 Ohm)
- loop() correctly gated for both GPS and BSEC-only builds
- Add fix_bsec_lib.py extra_script to resolve nRF52840 hard-float ABI
  mismatch in Bosch's PlatformIO packaging, silly Bosch

One general note outside of this code change: I noticed while BME680
_functions_ in companion nodes, since companion nodes run Bluetooth,
BLE preempts the CPU, and can do so mid-I2C-transaction.

This can cause the BME680 to see an anomaly and drop calibration and
start a recalibrate. This is behavior that will exist (and has existed)
regardless of using the Adafruit or Bosch paths.

This particular companion behavior does not seem to occur in sensor
or repeater nodes since their BLE is off. Probably affects other
I2C devices as well.

*Tests:*

- RAK19003
- RAK19007
- RAK19001
- repeater, sensor, companion
2026-05-27 15:33:48 -06:00
ripplebiz c94a9c2589 Merge pull request #2517 from oltaco/techo-card
Add support for LilyGo T-Echo Card (and tiny-ui!)
2026-05-21 20:45:54 +10:00
taco 152c0c5069 fix debug params for t-echo card 2026-05-21 19:58:10 +10:00
taco d41d1da290 remove deprecated functions, fix typo and style 2026-05-21 19:58:10 +10:00
taco 6c669893de tiny ui rendering fixes 2026-05-21 19:58:10 +10:00
taco 19e4e662c4 add torch 2026-05-21 19:58:10 +10:00
taco 0abeb73f84 add tinyui for lilygo t-echo card 2026-05-21 19:58:10 +10:00
taco 321e10147a u8g2 wrapper: allow larger font when size >= 2 2026-05-21 19:58:10 +10:00
pelgraine dade33c044 add wrapper for u8g2 display driver 2026-05-21 19:58:10 +10:00
taco 2420925101 initial t-echo card support 2026-05-21 19:58:10 +10:00
Huw Duddy 8d80f5e622 Merge pull request #2443 from kizniche/fix-rxdelay-txdelay
Fix: Enforce upper bounds for rxdelay, txdelay, and direct.txdelay
2026-05-21 16:57:41 +10:00
Liam Cottle 10db9468b2 Merge pull request #2594 from meshcore-dev/extended-ack
support for sending 6-byte ACKs
2026-05-21 17:45:03 +12:00
Scott Powell 2877e2860d * added 6th byte to ACK, with RNG 2026-05-21 00:00:03 +10:00
Huw Duddy 349ad51cf6 Merge pull request #2576 from csrutil/fix/heltec-t096-sensor-env
Add Heltec T096 sensor environment
2026-05-20 22:21:58 +10:00
Liam Cottle 13cf431c08 Merge pull request #2592 from oltaco/nrf52-pio-target-fix
Fix upload and monitor targets for nrf52 envs
2026-05-20 22:26:58 +12:00
taco 7503a144b3 add openocd_target to lilygo t-impulse board.json 2026-05-20 20:02:18 +10:00
Scott Powell d806870aef * bug fix 2026-05-19 17:06:42 +10:00
Scott Powell ab96718a84 * fix 2026-05-17 22:38:42 +10:00
Scott Powell 19499a4eda * support for sending 5-byte ACKs 2026-05-17 22:10:13 +10:00
csrutil 0e2a9a0848 Add Heltec T096 sensor environment 2026-05-17 16:17:05 +08:00
Liam Cottle 242ca7a9e6 Merge pull request #2574 from ViezeVingertjes/docs/kiss-txbusy-error
Document HW_ERR_TX_BUSY in KISS modem protocol
2026-05-17 12:37:15 +12:00
ViezeVingertjes b3efbd2b95 Document HW_ERR_TX_BUSY in KISS modem protocol 2026-05-16 11:32:33 +02:00
Liam Cottle 788b8fb14c Merge pull request #2565 from willumpie82/ble-pin-code
Disable BLE_PIN_CODE for E290 companion USB environment
2026-05-15 23:17:43 +12:00
Willem Oldemans 89ccec6a03 Remove static BLE_PIN_CODE definition from Heltec E290_usb configuration 2026-05-15 13:09:59 +02:00
Willem Oldemans bd7b2e62ee Disable BLE_PIN_CODE for E290 companion USB environment
Remove the hardcoded BLE_PIN_CODE build flag from the Heltec_E290_companion_ble
environment. The presence of BLE_PIN_CODE prevents the unit from operating as a
USB companion. Commenting it out allows dynamic PIN generation and enables USB
companion functionality.
2026-05-15 12:57:36 +02:00
Liam Cottle f91596bfb2 Merge pull request #2493 from Rococo88/complex-wifi-reconnect
Refactor WiFi auto-reconnect to use non-blocking polling
2026-05-15 21:21:16 +12:00
ripplebiz e674280570 Merge pull request #2497 from oltaco/reduce-esp32-dram
Reduce dram0_0 usage on older ESP32 boards
2026-05-15 14:04:42 +10:00
ripplebiz 98c2981987 Merge pull request #2515 from Cisien/station-g3-esp32
Add support for Station G3 and its software configurable LNA/PA1
2026-05-15 13:58:42 +10:00
Liam Cottle 13a04f2dc9 Merge pull request #2543 from meshcore-dev/cmd-send-raw
new CMD_SEND_RAW_PACKET
2026-05-13 22:10:52 +12:00
Scott Powell efa0f86fa7 * new CMD_SEND_RAW_PACKET 2026-05-13 13:28:56 +10:00
Huw Duddy 06a5242ddc Merge pull request #2536 from recrof/patch-3
revert: "feat: Enable GPS on RAK 1W kit" (#2401)
2026-05-13 00:41:41 +10:00
Rastislav Vysoky 266eb349d4 revert: "feat: Enable GPS on RAK 1W kit" (#2401)
reverted changes to RAK_BOARD and PIN_GPS_EN. setting `RAK_BOARD` would cause radio to stop working and end with RadioLib error -707
2026-05-12 15:56:28 +02:00
liamcottle af230c7be5 fix gps pins for lilygo t impulse plus 2026-05-12 10:36:19 +12:00
Liam Cottle e3426309e7 Merge pull request #2522 from liamcottle/board/lilygo-t-impulse-plus
Add support for LilyGo T-Impulse-Plus
2026-05-12 01:39:44 +12:00
liamcottle f4b31d3e51 turn off 3.3v rail when powering off 2026-05-12 01:06:22 +12:00
Liam Cottle 431133a39d Merge pull request #2520 from Quency-D/heltec-mesh-node-t1
add heltec-mesh-node-t1
2026-05-12 00:38:14 +12:00
liamcottle 29c5f33079 fix battery voltage reading 2026-05-11 22:17:53 +12:00
liamcottle 57dad2393a initial support for lilygo t impulse plus 2026-05-11 22:05:06 +12:00
Liam Cottle 881e0cf1db Merge pull request #2519 from oltaco/customlfs-0.2.2
pin CustomLFS to version 0.2.2
2026-05-11 21:33:05 +12:00
Quency-D e9b8926155 add heltec-mesh-node-t1 2026-05-11 15:11:07 +08:00
taco f195d93392 pin CustomLFS to version 0.2.2
CustomLFS 0.2.2 adds support for the flash chip in LilyGo T-Echo Card and T-Echo Lite
2026-05-11 11:37:56 +10:00
Huw Duddy a73dcdfd87 Merge pull request #2503 from jirogit/fix/techo-lite-non-shell-usb
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-10 22:40:12 +10:00
Liam Cottle 93b77513b4 Merge pull request #2516 from oltaco/disable-ds3231-probe
Add option to disable DS3231 RTC probe
2026-05-10 22:48:47 +12:00
taco 56672fc61e add option to disable DS3231 probe 2026-05-10 20:29:47 +10:00
Huw Duddy 43e8282a5f Merge pull request #2511 from entr0p1/techo-lite-rf-fix
Corrected T-Echo Lite SX1262 RXEN and TXEN pins, TCXO voltage.
2026-05-10 19:55:20 +10:00
Chris 9078a822f7 Add support for Station G3 and its software configurable LNA and PA1 2026-05-09 13:53:20 -07:00
entr0p1 5f59a5b7fc T-Echo Lite LoRa radio fixes
- Set TCXO voltage to 1.8 (not defined previously, falls back to default)
- Set correct variable name for SX1262 RX/TX pins
- Fix SX1262 RX pin number
2026-05-09 14:26:55 +10:00
Liam Cottle 13684f9212 Merge pull request #2490 from tuzzmaniandevil/dev
Enhance KissModem frame processing and timeout handling
2026-05-08 23:23:14 +12:00