Frieder Schrempf
be5ac4fe6b
variants: WisMesh Tag: Enable DC/DC regulator
...
According to the documentation and experiments on other boards using
NRF52 + SX1262 this reduces the power consumption significantly. This
assumes that the hardware actually has the inductor for the internal
DC/DC regulator populated which is very likely. Even if not, it won't
hurt.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:02 +01:00
Jaroslav Škarvada
fe6cea2c15
companion: Suspend radio when hibernating
...
This should significantly reduce power consumption in hibernation.
Fixes : #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com >
Signed-off-by: Frieder Schrempf <frieder@fris.de > # generalize for all radios and UIs
2025-11-22 15:05:01 +01:00
ripplebiz
5db55d34a9
Merge pull request #1113 from recrof/bme280_fix
...
fix: make bme280 sensor usable again
2025-11-19 15:39:48 +11:00
recrof
c067704bb1
fix: move bme680 detection before bme280
2025-11-18 15:36:25 +01:00
ripplebiz
6b9396b91b
Merge pull request #1092 from liquidraver/rakgps
...
Fix RAK4631 GPS UART pin macros for L76K to work
2025-11-17 14:04:09 +11:00
ripplebiz
13defac19a
Merge pull request #1106 from oltaco/keepteen-lt1
...
Add support for Keepteen LT1
2025-11-17 13:50:16 +11:00
Florent
21ee8609b7
xiao_s3: relocate serial pins on repeater_bridge_rs232
...
* conflicts with i2c pins that are documented on the same pins
* this is a commented target
2025-11-16 17:07:33 +01:00
Florent
c59d40114f
xiao_s3: use environment sensor manager and add sensor role
2025-11-16 16:55:16 +01:00
taco
499c2ea326
Keepteen LT1: remove terminal_chat and sensor targets
2025-11-16 16:17:11 +11:00
taco
767c7007aa
initial support: Keepteen LT1
2025-11-16 15:55:49 +11:00
ripplebiz
d80068e8ae
Merge pull request #1071 from tpp-at-idx/thinknode_m2
...
Thinknode_M2: better battery reading accuracy and no display on powerup fix
2025-11-14 15:11:06 +11:00
ripplebiz
9fb8ccf871
Merge pull request #985 from liquidraver/dev3
...
Fix reversed GPS PINs on G2 and enable timesync
2025-11-14 14:34:23 +11:00
ripplebiz
b5eb82fc41
Merge pull request #1035 from liquidraver/devt114
...
Add Heltec T114 GPS + timesync
2025-11-14 14:33:05 +11:00
Liam Cottle
6799578cc6
Merge pull request #1100 from stphnrdmr/dev
...
Allow SF smaller than 7 to be saved
2025-11-14 12:15:10 +13:00
Stephan Rodemeier
822052cdca
Allow SF smaller than 7 to be saved
2025-11-13 22:25:55 +01:00
Scott Powell
f54d819269
* ver 1.10.0
2025-11-13 20:45:38 +11:00
fdlamotte
19633ffcbf
Update library.json to latest libs and version
2025-11-13 10:39:20 +01:00
ripplebiz
3ad1cafed2
Merge pull request #1064 from recrof/esp_contacts_350_channels_40
...
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-12 00:49:05 +11:00
ripplebiz
8e30aa6c7c
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
liquidraver
f1c4fa8444
Fix RAK4631 GPS UART pin macros
2025-11-11 13:00:27 +01:00
Florent
eb7d93ff91
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
0e95b123d8
* Sensor: DISCOVER_REQ, prefix_only support
2025-11-11 20:08:05 +11:00
ripplebiz
b62e845c28
Merge pull request #1068 from fdlamotte/sensor_control_data
...
sensor: copy control data code from repeater
2025-11-11 20:03:33 +11:00
Scott Powell
cf3da818b8
* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.
2025-11-09 16:36:23 +11:00
Scott Powell
ae53d372a2
* added StrHelper::fromHex()
2025-11-09 16:17:49 +11:00
Tomas P
74f7f7e93e
Fix for display not coming on after poweron
2025-11-07 09:50:21 +01:00
Tomas P
a5e88f6d15
tweak getBattMilliVolts to report battery more accurately
2025-11-07 09:48:57 +01:00
Tomas P
be0ab402f7
change ADC_MULTIPLIER to better reflect battery voltage
2025-11-07 09:47:18 +01:00
Scott Powell
4b2a2e1ed3
* repeater, DISCOVER_REQ, flags lowest bit now for 'prefix_only' responses
2025-11-07 19:31:09 +11:00
Scott Powell
61a0cb42d2
* packet format docs updated
2025-11-07 15:49:01 +11:00
Scott Powell
990aad6bac
Merge branch 'transportcodes' into dev
2025-11-07 14:52:11 +11:00
Scott Powell
1d12bc116d
* repeater: various "region" CLI changes
...
* transport codes 0000 and FFFF reserved
2025-11-07 14:42:06 +11:00
Florent
fc6fe7c6ba
sensor: copy control data code from repeater
2025-11-06 22:36:37 +01:00
Scott Powell
96ed2a69f8
* companion: protocol ver bumped to 8.
2025-11-06 22:51:17 +11:00
Scott Powell
7a04e7fcd1
* companion: added CMD_SEND_CONTROL_DATA, and PUSH_CODE_CONTROL_DATA
2025-11-06 22:10:20 +11:00
Scott Powell
7058462f40
* repeater: CLI, added "region put" and "region remove" commands
2025-11-06 21:40:52 +11:00
Scott Powell
bc98f96028
* repeater: onAnonDataRecv(), future code check bug fix (offset 4)
...
* sensor: onAnonDataRecv(), future request code provision
2025-11-06 20:22:40 +11:00
Scott Powell
d6c1f0678c
* repeater: onAnonDataRecv(), now rejecting non-ASCII password (preparing for future request codes)
...
* repeater: DISCOVER requests now with a simple RateLimiter (max 4, every 2 minutes)
2025-11-06 20:15:01 +11:00
Scott Powell
b9e9456535
* RegionMap: get/set Home Region
...
* repeater: admin CLI, changed "allowf *", "denyf *", added "home"
2025-11-06 17:28:45 +11:00
ripplebiz
84058631aa
Merge pull request #1038 from adam2872/Analogue-button-fix-for-new-UI
...
Analogue user button fix for new UI
2025-11-06 15:41:45 +11:00
ripplebiz
d3c73ebea7
Merge pull request #1058 from dotdavid/dev
...
Fix Xiao S3 WIO board name
2025-11-06 13:45:12 +11:00
Scott Powell
92b50f9cec
* region filtering now applied in allowPacketForward()
2025-11-06 12:27:25 +11:00
Scott Powell
778c2bfe9f
* new PAYLOAD_TYPE_CONTROL (11)
...
* repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only)
* node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )
2025-11-06 00:56:54 +11:00
Scott Powell
2602c80004
* is_name_char() bug fix
2025-11-05 15:34:23 +11:00
Scott Powell
11fdf82162
* companion: new CMD_SET_FLOOD_SCOPE (54)
2025-11-05 14:56:18 +11:00
Scott Powell
fc909dfc24
* RegionMap: inverted 'flags' to _deny_ bits
...
* Mesh: new filterRecvFloodPacket() for overriding
* repeater CLI: 'allow' -> 'allowf' or 'denyf'
2025-11-05 14:34:44 +11:00
recrof
13af2f5d11
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-04 23:58:32 +01:00
David Hall
a3a3d70fb9
Fix manufacturer name on Seeed Xiao S3 WIO
2025-11-03 21:02:08 +00:00
David Hall
37ead53b1d
Fix manufacturer name on Seeed Xiao S3 WIO
2025-11-03 21:00:43 +00:00
Scott Powell
47a74f6a12
* Mesh: new sendFlood() overload with transport codes.
...
* BaseChatMesh: sendFloodScoped(), for overriding with some outbound 'scope' / TransportKey
* companion: new 'send_scope' variable.
2025-11-04 01:21:56 +11:00