Commit Graph
3355 Commits
Author SHA1 Message Date
Thomas Osterried cedc9977c2 Skip empty channel slots in searchChannelsByHash
An unconfigured slot has an all-zero secret, so it matches null-key group traffic (a sender with an unset PSK). The zero-key MAC validates against the empty slot and the foreign message is delivered as if it belonged to that channel — every node with a free slot is a null-key sink. Skip empty slots.
2026-08-19 09:35:25 +02:00
liamcottle b123971e21 fix for 3-byte paths passed to CMD_SEND_RAW_DATA 2026-08-19 18:59:24 +12:00
Huw Duddy eea89dfd1c Merge pull request #3235 from meshcore-dev/send-raw-direct-fix
Fix for CMD_SEND_RAW_DATA and multi-byte paths
2026-08-19 11:32:34 +10:00
ripplebiz 6d8f16fabb Merge pull request #3246 from liamcottle/update/toolchain
Update GCC toolchain for nRF52 boards to fix builds on Raspberry Pi
2026-08-19 11:30:08 +10:00
liamcottle deb5e735b8 updated gcc toolchain for nrf52 boards 2026-08-19 12:07:29 +12:00
fdlamotte ed227b9cb6 Merge pull request #3180 from fdlamotte/thinknode_m8
thinknode_m8: initial support

adds some functionalities to ui_task and epddisplay:

epd display, 
- supports screen off, and clear screen
- supports forcing full refresh every N partial refreshes (off by default, configured to 60 for M8)

ui_task
- UI_SHOW_CLOCK flag to display clock on first screen
- rotary button can act like joystick (with regards to Enter key), defaults to old config for existing nodes
- screen off on long press when using rotary button (very handy for the watch)
2026-08-18 09:33:42 -04:00
ripplebiz d9c63d4b43 Merge pull request #3238 from recrof/meshadventurer-board-relocate
fix: move MeshadventurerBoard.h to variants/meshadventurer
2026-08-18 23:04:35 +10:00
ripplebiz 24b3119bc8 Merge pull request #3239 from recrof/default-loop-detect-minimal
repeater: set `loop.detect` to `minimal` as default for new installs
2026-08-18 23:03:10 +10:00
Rastislav Vysoky d1a2a0c20b repeater: set loop.detect to minimal as default for new installs 2026-08-18 14:56:58 +02:00
Rastislav Vysoky 053fa3eb83 fix: move MeshadventurerBoard.h to correct location 2026-08-18 13:51:55 +02:00
Scott Powell 44bbf74fbf Fix for CMD_SEND_RAW_DATA and multi-byte paths 2026-08-18 13:11:15 +10:00
Florent cec44c05dd gxepd: do full refresh before screen off ... so wakes quicker ;) 2026-08-17 09:41:51 -04:00
Florent c54139f7db M8: preview messages up to 164 cars 2026-08-17 09:24:17 -04:00
Huw Duddy 22bc13804c Merge pull request #3218 from fkallay1/fix/lr2021-set-tx-power-rx-stall
Fix LR2021 occasionally stopping reception after a TX power change
2026-08-17 23:20:32 +10:00
Huw Duddy debbbb81c0 trimmed comment 2026-08-17 23:16:01 +10:00
Florent 3f4be26003 gxepddisplay: better handling of full refresh (no faint partial afterwards !!!) 2026-08-16 11:40:13 -04:00
Fedor Kallay aa2292459f fix(lr2021): setTxPower() could leave the receiver down until reboot
RadioLibWrapper::setTxPower() called setOutputPower() and nothing else. On
LR2021 that writes the PA config and TxParams, which are standby-only commands,
and it never re-arms the receiver.

This only affects LR2021 boards. recvRaw() has:

    #if defined(USE_LR2021)
      state = STATE_RX;    // LR2021 stays in Rx after readData
    #else
      state = STATE_IDLE;  // need another startReceive()
    #endif

so on SX126x the next recvRaw() re-arms Rx anyway and the write is harmless,
while on LR2021 startReceive() is never called again on its own. A 'set tx'
issued while the radio was listening could therefore stop reception until the
next reboot. Observed a few times on an LR2021 repeater; recovery required a
power cycle.

Dispatcher's stuck-radio check does not catch it: isInRecvMode() reports the
wrapper's own `state` flag rather than the chip's actual mode, so it still
believes the radio is in Rx, and it only raises ERR_EVENT_STARTRX_TIMEOUT
without attempting recovery.

Fix: on LR2021, drop to standby via idle() before writing the PA config and let
checkRecv() re-arm Rx - the same pattern resetAGC() and
applySideDetectorConfig() already use. Other radios are left untouched.

Affects meshtracker_x1 and meshnology_w12 (both USE_LR2021).

Tested on hardware with an LR2021 repeater: six consecutive 'set tx' changes
(15/18/21/14/19/14), after which the radio kept receiving and forwarding
traffic (rawrx/rxpkts increasing, no missed IRQs). Noise-floor sampling also
kept updating, which only happens while state == STATE_RX.
2026-08-15 02:31:19 +02:00
Scott Powell cad602e416 * version 1.17.1 companion-v1.17.1 repeater-v1.17.1 room-server-v1.17.1 2026-08-14 22:19:19 +10:00
Huw Duddy 54040eef43 Merge pull request #3206 from meshcore-dev/nrf-combine-rng-entropy
combine radio's entropy with CC310 RNG
2026-08-14 22:09:26 +10:00
Scott Powell 10b6552872 * combine radio's entropy with CC310 RNG 2026-08-14 17:46:43 +10:00
Huw Duddy 0523076479 Merge pull request #3203 from meshcore-dev/companion-fem-pref-fix
commenting out the load/save of the fem_ properties
2026-08-14 16:44:59 +10:00
Scott Powell c97e40d15d * unit test no longer valid 2026-08-14 16:42:54 +10:00
Scott Powell 5ff2d7109b * commenting out the load/save of the fem_ properties, until they can be set 2026-08-14 16:30:12 +10:00
ripplebiz f8832af086 Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebiz 2581baaaa4 Merge pull request #3189 from oltaco/nrf52-unused-pin-sweep
Fix unused pin definitions on some NRF52 boards
2026-08-13 13:48:59 +10:00
taco a80ddbf4e2 Fix LilyGo T-Echo Lite SPI pins 2026-08-13 00:53:58 +10:00
taco d0ceba7976 Fix Heltec MeshPocket SPI pins 2026-08-13 00:15:34 +10:00
taco 0028bd9bec Fix Heltec T1 pin definitions
SPI pins that are set to -1 cause OOB reads on NRF52. The unused Serial2 pin definitions were removed to avoid potential issues with the Uart framework.
2026-08-13 00:12:37 +10:00
ripplebiz 09933264fb Merge pull request #3188 from oltaco/heltec-t096-pin-fix
Fix Heltec T096 Tx issue
2026-08-12 23:00:31 +10:00
taco 248e6a9fab Heltec T096: fix PIN_SPI1_MISO
Setting SPI pins to values that are OOB of the g_ADigitalPinMap[] array causes OOB reads. This variant.h has pin 0 as 0xFF which passes through as NRFX_SPIM_PIN_NOT_USED.
2026-08-12 22:31:57 +10:00
taco 0f686aa3f1 Revert "t096 compiler layout workaround"
This reverts commit bdefc8d085.
2026-08-12 22:28:36 +10:00
taco 920ee315ec Revert "T096 PA_CTX pin direction workaround"
This reverts commit b13962d7de.
2026-08-12 22:28:05 +10:00
ripplebiz 6b79020bbd Merge pull request #3185 from oltaco/fix-techo-card-txco-voltage
Set T-Echo Card TCXO voltage to 3.0
2026-08-12 18:13:44 +10:00
ripplebiz d5949f93d8 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
taco 309a04162e set T-Echo Card TCXO voltage to 3.0
as per https://github.com/meshcore-dev/MeshCore/pull/3140 and https://github.com/Xinyuan-LilyGO/T-Echo-Lite/issues/14
2026-08-12 16:08:05 +10:00
ripplebiz c913b0fec1 Merge pull request #3182 from oltaco/t096-tx-workaround
Workaround for Heltec T096 transmit issue
2026-08-12 14:49:32 +10:00
taco b13962d7de T096 PA_CTX pin direction workaround 2026-08-12 14:07:31 +10:00
taco bdefc8d085 t096 compiler layout workaround
see https://github.com/meshcore-dev/MeshCore/issues/3151
2026-08-12 14:04:50 +10:00
ripplebiz 3dfbcf93b8 Merge pull request #3154 from fdlamotte/nrf52_hwcrypto_init
nrf52: call nRFCrypto.begin()/end() only once
2026-08-12 12:14:21 +10:00
Florent 109ed685b2 thinknode_m8: initial support 2026-08-11 17:37:35 -04:00
Huw Duddy 467fe37109 Merge pull request #3170 from recrof/promicro-pin-tidy-up
[promicro] make pinmap more tidy, move the LoRa pins to variant.h
2026-08-11 18:43:20 +10:00
Rastislav Vysoky 3631de37de removed misleading 'GPIO' from pin numbers 2026-08-11 10:37:20 +02:00
ripplebiz c6d2dd6234 Merge pull request #3164 from weebl2000/fix-tbeam-s3-display
Fix display issues on T-beam Supreme S3
2026-08-11 14:39:39 +10:00
agessaman f82950f311 feat(companion_radio): add external FEM gain preferences for RX and TX for companions
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
Rastislav Vysoky a3825aa272 make promicro pinmap more tidy, move the LoRa pins to variant.h 2026-08-10 20:13:59 +02:00
Liam Cottle ff0ef14159 Merge pull request #3166 from recrof/debug-noise-floor-flag
move RadioLibWrapper noise_floor level message under special debug flag
2026-08-11 03:07:31 +12:00
Rastislav Vysoky 09ef746f29 move RadioLibWrapper noise_floor level message under special debug flag 2026-08-10 16:56:56 +02:00
Wessel Nieboer 1d98c49b1b Fix T-beam Supreme S3 display 2026-08-10 13:39:16 +02:00
Huw Duddy 5f55d855bc Merge pull request #3158 from mepholic/bug/fix-rxgain-setting-post-agc-reset
Fix RX Boosted Gain setting after AGC reset is triggered
2026-08-10 17:31:38 +10:00
ripplebiz 04fda41bd5 Merge pull request #3142 from oltaco/buildfix-userbtn
Build fix for R1 Neo and Minewsemi repeater
2026-08-10 13:30:24 +10:00