fdlamotte
ed227b9cb6
Merge pull request #3180 from fdlamotte/thinknode_m8
...
thinknode_m8: initial support
adds some functionalities to ui_task and epddisplay:
epd display,
- supports screen off, and clear screen
- supports forcing full refresh every N partial refreshes (off by default, configured to 60 for M8)
ui_task
- UI_SHOW_CLOCK flag to display clock on first screen
- rotary button can act like joystick (with regards to Enter key), defaults to old config for existing nodes
- screen off on long press when using rotary button (very handy for the watch)
2026-08-18 09:33:42 -04:00
Rastislav Vysoky
053fa3eb83
fix: move MeshadventurerBoard.h to correct location
2026-08-18 13:51:55 +02:00
Florent
c54139f7db
M8: preview messages up to 164 cars
2026-08-17 09:24:17 -04:00
taco
a80ddbf4e2
Fix LilyGo T-Echo Lite SPI pins
2026-08-13 00:53:58 +10:00
taco
d0ceba7976
Fix Heltec MeshPocket SPI pins
2026-08-13 00:15:34 +10:00
taco
0028bd9bec
Fix Heltec T1 pin definitions
...
SPI pins that are set to -1 cause OOB reads on NRF52. The unused Serial2 pin definitions were removed to avoid potential issues with the Uart framework.
2026-08-13 00:12:37 +10:00
ripplebiz
09933264fb
Merge pull request #3188 from oltaco/heltec-t096-pin-fix
...
Fix Heltec T096 Tx issue
2026-08-12 23:00:31 +10:00
taco
248e6a9fab
Heltec T096: fix PIN_SPI1_MISO
...
Setting SPI pins to values that are OOB of the g_ADigitalPinMap[] array causes OOB reads. This variant.h has pin 0 as 0xFF which passes through as NRFX_SPIM_PIN_NOT_USED.
2026-08-12 22:31:57 +10:00
taco
920ee315ec
Revert "T096 PA_CTX pin direction workaround"
...
This reverts commit b13962d7de .
2026-08-12 22:28:05 +10:00
ripplebiz
6b79020bbd
Merge pull request #3185 from oltaco/fix-techo-card-txco-voltage
...
Set T-Echo Card TCXO voltage to 3.0
2026-08-12 18:13:44 +10:00
ripplebiz
d5949f93d8
Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
...
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
taco
309a04162e
set T-Echo Card TCXO voltage to 3.0
...
as per https://github.com/meshcore-dev/MeshCore/pull/3140 and https://github.com/Xinyuan-LilyGO/T-Echo-Lite/issues/14
2026-08-12 16:08:05 +10:00
taco
b13962d7de
T096 PA_CTX pin direction workaround
2026-08-12 14:07:31 +10:00
Florent
109ed685b2
thinknode_m8: initial support
2026-08-11 17:37:35 -04:00
Rastislav Vysoky
3631de37de
removed misleading 'GPIO' from pin numbers
2026-08-11 10:37:20 +02:00
Rastislav Vysoky
a3825aa272
make promicro pinmap more tidy, move the LoRa pins to variant.h
2026-08-10 20:13:59 +02:00
ripplebiz
04fda41bd5
Merge pull request #3142 from oltaco/buildfix-userbtn
...
Build fix for R1 Neo and Minewsemi repeater
2026-08-10 13:30:24 +10:00
Huw Duddy
79d2eeaa76
Merge pull request #3148 from recrof/add-missing-kiss-radio
...
add missing kiss radio roles, add kiss radio build to build.sh
2026-08-09 22:22:08 +10:00
Rastislav Vysoky
d3f9cbb922
add missing kiss radio roles, add kiss radio build to build.sh
2026-08-09 14:17:18 +02:00
Huw Duddy
66eb74f0fb
Merge pull request #3140 from entr0p1/fix/techo-lite-pins
...
Lilygo T-Echo Lite Pin Fixes
2026-08-09 22:06:21 +10:00
taco
2d412be465
minewsemi: build fix and platformio.ini tidy up
...
fixes minewsemi repeater failing build due to user_btn missing.
2026-08-09 18:33:27 +10:00
taco
05bdabe425
R1 neo: remove stray lib_deps entry
2026-08-09 16:51:45 +10:00
taco
7634c077e5
build fix for R1 Neo repeater
...
added missing declarations for user_btn and NullDisplayDriver
2026-08-09 16:50:44 +10:00
entr0p1
430ef3b086
Lilygo T-Echo Lite Pin Fixes
...
- Aligned to Lilygo's updated schematic and pin map as per https://github.com/Xinyuan-LilyGO/T-Echo-Lite/issues/14
2026-08-09 14:09:35 +10:00
ripplebiz
02f7fb7cbc
Merge pull request #3139 from oltaco/x1-flash
...
Add QSPIFlash support for Seeed MeshTracker X1
2026-08-09 13:52:56 +10:00
taco
964d87c890
add QSPIFlash support for Seeed MeshTracker X1
2026-08-09 11:41:09 +10:00
Adam Gessaman
5704db9f74
fix(station-g3): apply FEM PA level at TX start
...
PA PL1 re-targets the PA's DC-DC supply rail rather than selecting a
logic-level gain, and the serial CLI is serviced on every main-loop pass
regardless of whether a transmit is in flight. A `set radio.fem.txgain`
write could therefore move the rail mid-transmit, while the SX1262 was
still driving the PA at full input power.
Record the requested level in setPAGainEnable() and drive the pin from
setTxModeEnable(), which runs from onBeforeTransmit() ahead of
startTransmit(). The level only matters while transmitting, so deferring
costs nothing.
Document that the pref is saved immediately but applied at the next
transmit, so `get radio.fem.txgain` can lead the hardware until then.
2026-08-08 14:53:57 -07:00
Hacuchino-hash
4160dfbb87
Fix X1 charge status LED always showing charged
2026-08-07 08:08:08 -05:00
agessaman
2eb7feffe0
fix(station-g3): expose FEM gain preferences
2026-08-06 15:29:14 -07:00
Hacuchino-hash
dc8e2d6745
Add SPA06 barometer telemetry and charge status LED for MeshTracker X1
2026-08-06 07:27:05 -05:00
Hacuchino-hash
f8ea866b1f
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-06 07:27:05 -05:00
Rastislav Vysoky
63108c2c90
ThinkNode M6: Remove QSPIFLASH=1 build flag to fix companion roles
...
M6 doesn't have flash chip available, so companion roles fail to start.
2026-08-06 12:37:21 +02:00
Hacuchino-hash
5b2613fc0a
Add support for Seeed SenseCAP MeshTracker X1 (LR2021)
2026-08-05 05:50:21 -05:00
ripplebiz
8bf182fb41
Merge pull request #3115 from oltaco/meshnology_w12
...
Add support for Meshnology W12 and LR2021 Wrapper
2026-08-05 15:04:00 +10:00
taco
e2d050df9f
add Meshnology W12 support and LR2021 wrapper
2026-08-05 14:23:29 +10:00
fdlamotte
bb48b096ce
Merge pull request #2863 from benskigomez/fix/m6-gps-reset-pin
...
thinknode_m6: don't drive GPS REINIT pin so the L76K is detected
2026-08-03 21:16:59 -04:00
me
77b1356b36
fix: M5Stack Unit C6L merged.bin fails to boot (flash_mode qio->dio)
...
Board manifest for esp32-c6-devkitm-1 defaults build.flash_mode to qio,
which this module's flash chip does not support -- causes a boot
crash-loop (repeated USB-Serial-JTAG reconnects) on real hardware.
Override with board_build.flash_mode = dio in the common M5Stack_Unit_C6L
section so it applies to all envs (ble/usb/repeater/room_server).
2026-08-01 22:20:20 -07:00
ripplebiz
17b809d62c
Merge pull request #3060 from entr0p1/fix/mesh-debug-active
...
Clean up debugs left on in platform.ini files
2026-07-30 12:35:22 +10:00
entr0p1
52fb56395d
Clean up debugs left on in platform.ini files
2026-07-29 18:27:15 +10:00
liamcottle
6e815d755f
usb companion firmwares now require build flag to include usb interface
2026-07-28 03:45:02 +12:00
liamcottle
bd83d290da
refactor rak13800 to new ethernet interface class
2026-07-28 03:18:54 +12:00
liamcottle
6a785759d3
refactored companion interfaces to allow for multiple active connection modes
2026-07-28 03:18:54 +12:00
liamcottle
1c7a4b307f
initial ch390 ethernet support for thinknode m7 companion
2026-07-28 03:18:54 +12:00
ripplebiz
f2e46925e6
Merge pull request #3034 from meshcore-dev/ui-color-refactor
...
UI color refactor
2026-07-27 17:45:12 +10:00
Liam Cottle
c5c78d37bd
Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276
...
Increase LilyGo T-Beam SX1276 channels from 8 to 40
2026-07-24 15:34:19 +12:00
liamcottle
77244ce4a6
increase tbeam sx1276 max group channels from 8 to 40
2026-07-24 15:31:01 +12:00
Liam Cottle
b057f40b53
Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
...
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Scott Powell
37ff90ab95
* build fixes for NullDisplayDriver
2026-07-22 18:55:59 +10:00
Scott Powell
365332205e
* refactor of Color mapping in UITasks / DisplayDrivers
...
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
Liam Cottle
06d660bf86
Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c
...
Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)
2026-07-21 19:17:32 +12:00