Commit Graph
3403 Commits
Author SHA1 Message Date
WesselandDan McGee db07f52349 Update src/helpers/ESP32Board.h
Co-authored-by: Dan McGee <dpmcgee@gmail.com>
2026-09-07 11:16:09 +02:00
Wessel Nieboer d683b178ed Fix 1970 date after crash/watchdog/brownout reset on ESP32
Currently, time is only set to ~2024 when it powers on cleanly. When
time is lost, this results in time dropping to 1970. Save time as backup
to RTC slow memory. Should fix time staying accurate during brownouts
etc.
2026-09-07 11:16:08 +02:00
ripplebiz dd3a8c1d22 Merge pull request #3366 from recrof/companion-cli-fix-2
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-07 10:42:48 +10:00
Rastislav Vysoky 552351457c Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh 2026-09-06 15:14:35 +02:00
Liam Cottle 4606918fad Merge pull request #3319 from oltaco/w12_txpower
Fix Meshnology W12 TX power
2026-09-01 23:06:58 +12:00
Liam Cottle 2cad3e1561 Merge pull request #3329 from reinforce/tz_offset
companion: get/set timezone offset for clock
2026-09-01 22:56:19 +12:00
Aleksei Mamlin c9e5cc15ba companion: get/set timezone offset for clock
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
2026-08-31 09:08:22 +03:00
fdlamotte d51bd9acca Merge pull request #3279 from fdlamotte/node_discover_ui
Node discover UI
2026-08-30 19:51:02 -04:00
fdlamotte dcd931fa2e Merge branch 'dev' into node_discover_ui 2026-08-29 11:02:58 -04:00
taco 3739ce91cf fix Meshnology W12 TX power 2026-08-29 15:22:54 +10:00
Scott Powell 5c32c46219 New TXT_TYPE_CLI_COMMAND (3) 2026-08-28 13:12:59 +10:00
liamcottle 599ecfcb65 fix cad cli command on companion 2026-08-27 19:05:18 +12:00
Liam Cottle 5edc936301 Merge pull request #3298 from meshcore-dev/companion-cli
Companion CLI
2026-08-27 18:17:10 +12:00
Scott Powell 3d4eadd2cd * fix for RPI Picow 2026-08-25 19:04:32 +10:00
Scott Powell 6239b462f2 * companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented. 2026-08-24 20:44:17 +10:00
Scott Powell 55855f4cae * DynamicConfigSerializer fixes, and unit tests 2026-08-24 19:42:55 +10:00
Liam Cottle e6d9abee21 Merge pull request #3275 from liamcottle/gps/rak3401
Fix PA on RAK3401 when GPS missing
2026-08-24 19:52:10 +12:00
Scott Powell 71deb27b7e * prefs, custom dirty state 2026-08-24 17:22:15 +10:00
Scott Powell 5a7bc507d1 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
Huw Duddy b880ab1cb6 Merge pull request #3290 from liamcottle/feature/ui-no-hibernate
add UI_NO_HIBERNATE build flag to disable hibernate screen
2026-08-24 13:40:47 +10:00
liamcottle 2136978378 add UI_NO_HIBERNATE build flag to disable hibernate screen on wio tracker l1 2026-08-24 13:45:19 +12:00
Scott Powell b5b20a7738 * refactored 'FEM' commands for HeltecTrackerV2 & HeltecV4 2026-08-24 02:16:18 +10:00
Scott Powell 8c73c948b4 * T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Florent a9c977db51 ui: opt-out for discover screen 2026-08-23 10:42:00 -04:00
Scott Powell ae61e1a61c support for CMD_SEND_TXT_MSG and new TXT_TYPE_CLI_COMMAND 2026-08-23 22:49:45 +10:00
Scott Powell 644e68d0ff * new TXT_TYPE_CLI_COMMAND (3) 2026-08-23 22:04:05 +10:00
Scott Powell 2c43bf1ba1 legacy queueMessage() case, eg. repeater replies 2026-08-23 20:07:28 +10:00
Scott Powell a29ccab178 onCommandDataRecv() use '>' prefix for CLI replies. 2026-08-23 20:03:49 +10:00
Scott Powell df507deac9 "Unknown command" replies 2026-08-23 19:35:43 +10:00
Scott Powell f66ed7ca88 * CommonRadioPrefs refactors done 2026-08-23 17:30:30 +10:00
Scott Powell 414e91fd5d * adding new CommonRadioPrefs
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
liamcottle 1266fc058f don't toggle io pins on rak3401 when probing gps 2026-08-23 14:14:45 +12:00
ripplebiz 219a5d1cc1 Merge pull request #3268 from liamcottle/rak/gps
Add support for RAK12500 and RAK12501 GPS on RAK3401
2026-08-22 14:35:21 +10:00
liamcottle f58c7293e2 add support for rak12500 and rak12501 gps on rak3401 2026-08-22 16:16:32 +12:00
Florent 2678be75bd ui: repeater discover screen 2026-08-21 18:24:46 -04:00
entr0p1 93bd279d34 Duplicate MAX_CLIENTS definition
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.

This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).

Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-21 15:11:57 -04:00
Scott Powell 5eaf5a86fb * initial wiring/routing of CLI commands to companion (either via app/serial interface, or remotely via txt message) 2026-08-21 20:55:57 +10:00
ripplebiz 1a8d860d8d Merge pull request #3233 from entr0p1/fix/centralise-max-clients
Fix duplicate MAX_CLIENTS definition
2026-08-20 14:09:30 +10:00
ripplebiz acc68d4fd4 Merge pull request #3234 from agessaman/fix/sensors-bosch-alt-i2c-address
Fix I2C address claiming and probe both BMP/BME addresses
2026-08-20 14:01:49 +10:00
ripplebiz 1e2e577885 Merge pull request #3236 from DominikTyrala/fix/c3_partition_setup
Fix Seeed C3 radio BLE exceeding flash size
2026-08-20 13:38:26 +10:00
ripplebiz 1f8a227e4b Merge pull request #3249 from dl9sau/patch-1
Skip empty channel slots in searchChannelsByHash
2026-08-20 13:11:02 +10:00
ripplebiz d225d29384 Merge pull request #3250 from hansimgamr/feat/t114-charging-indicator
Add charging indicator to companion_radio battery icon
2026-08-20 12:59:26 +10:00
hansimgamrandClaude Opus 4.8 cdff1a5f4f Show plug at >=95% instead of exactly 100%
Boards without a charge-complete signal only infer "full" from voltage, and
a real pack rarely reads the full BATT_MAX_MILLIVOLTS (4.2V), so the plug icon
was effectively never shown. Treat "full" as a high band (>= 95%) so the plug
appears when the battery is charged rather than requiring an exact 100%.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
hansimgamrandClaude Opus 4.8 0c72b517e8 Add charging indicator to companion_radio battery icon
Show a small lightning-bolt icon to the left of the battery indicator on
the ui-new home screen while the device is externally powered, and a plug
icon once the battery reads full. The bolt/plug sits beside the battery so
the fill bar stays clean and uninterrupted. When a buzzer is present, the
mute icon shifts one slot further left so the two never overlap.

Charging state is derived from board.isExternalPowered(), so this works on
any board that reports external power (e.g. the nRF52 VBUS-detect path).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
Thomas Osterried cedc9977c2 Skip empty channel slots in searchChannelsByHash
An unconfigured slot has an all-zero secret, so it matches null-key group traffic (a sender with an unset PSK). The zero-key MAC validates against the empty slot and the foreign message is delivered as if it belonged to that channel — every node with a free slot is a null-key sink. Skip empty slots.
2026-08-19 09:35:25 +02:00
liamcottle b123971e21 fix for 3-byte paths passed to CMD_SEND_RAW_DATA 2026-08-19 18:59:24 +12:00
Huw Duddy eea89dfd1c Merge pull request #3235 from meshcore-dev/send-raw-direct-fix
Fix for CMD_SEND_RAW_DATA and multi-byte paths
2026-08-19 11:32:34 +10:00
ripplebiz 6d8f16fabb Merge pull request #3246 from liamcottle/update/toolchain
Update GCC toolchain for nRF52 boards to fix builds on Raspberry Pi
2026-08-19 11:30:08 +10:00
liamcottle deb5e735b8 updated gcc toolchain for nrf52 boards 2026-08-19 12:07:29 +12:00
fdlamotte ed227b9cb6 Merge pull request #3180 from fdlamotte/thinknode_m8
thinknode_m8: initial support

adds some functionalities to ui_task and epddisplay:

epd display, 
- supports screen off, and clear screen
- supports forcing full refresh every N partial refreshes (off by default, configured to 60 for M8)

ui_task
- UI_SHOW_CLOCK flag to display clock on first screen
- rotary button can act like joystick (with regards to Enter key), defaults to old config for existing nodes
- screen off on long press when using rotary button (very handy for the watch)
2026-08-18 09:33:42 -04:00