Commit Graph
988 Commits
Author SHA1 Message Date
ripplebiz dd3a8c1d22 Merge pull request #3366 from recrof/companion-cli-fix-2
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-07 10:42:48 +10:00
Rastislav Vysoky 552351457c Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh 2026-09-06 15:14:35 +02:00
Aleksei Mamlin c9e5cc15ba companion: get/set timezone offset for clock
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
2026-08-31 09:08:22 +03:00
fdlamotte dcd931fa2e Merge branch 'dev' into node_discover_ui 2026-08-29 11:02:58 -04:00
liamcottle 599ecfcb65 fix cad cli command on companion 2026-08-27 19:05:18 +12:00
Liam Cottle 5edc936301 Merge pull request #3298 from meshcore-dev/companion-cli
Companion CLI
2026-08-27 18:17:10 +12:00
Scott Powell 6239b462f2 * companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented. 2026-08-24 20:44:17 +10:00
Scott Powell 71deb27b7e * prefs, custom dirty state 2026-08-24 17:22:15 +10:00
Scott Powell 5a7bc507d1 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
liamcottle 2136978378 add UI_NO_HIBERNATE build flag to disable hibernate screen on wio tracker l1 2026-08-24 13:45:19 +12:00
Scott Powell 8c73c948b4 * T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Florent a9c977db51 ui: opt-out for discover screen 2026-08-23 10:42:00 -04:00
Scott Powell ae61e1a61c support for CMD_SEND_TXT_MSG and new TXT_TYPE_CLI_COMMAND 2026-08-23 22:49:45 +10:00
Scott Powell 644e68d0ff * new TXT_TYPE_CLI_COMMAND (3) 2026-08-23 22:04:05 +10:00
Scott Powell 2c43bf1ba1 legacy queueMessage() case, eg. repeater replies 2026-08-23 20:07:28 +10:00
Scott Powell a29ccab178 onCommandDataRecv() use '>' prefix for CLI replies. 2026-08-23 20:03:49 +10:00
Scott Powell df507deac9 "Unknown command" replies 2026-08-23 19:35:43 +10:00
Scott Powell f66ed7ca88 * CommonRadioPrefs refactors done 2026-08-23 17:30:30 +10:00
Scott Powell 414e91fd5d * adding new CommonRadioPrefs
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
Florent 2678be75bd ui: repeater discover screen 2026-08-21 18:24:46 -04:00
entr0p1 93bd279d34 Duplicate MAX_CLIENTS definition
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.

This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).

Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-21 15:11:57 -04:00
Scott Powell 5eaf5a86fb * initial wiring/routing of CLI commands to companion (either via app/serial interface, or remotely via txt message) 2026-08-21 20:55:57 +10:00
ripplebiz 1a8d860d8d Merge pull request #3233 from entr0p1/fix/centralise-max-clients
Fix duplicate MAX_CLIENTS definition
2026-08-20 14:09:30 +10:00
hansimgamrandClaude Opus 4.8 cdff1a5f4f Show plug at >=95% instead of exactly 100%
Boards without a charge-complete signal only infer "full" from voltage, and
a real pack rarely reads the full BATT_MAX_MILLIVOLTS (4.2V), so the plug icon
was effectively never shown. Treat "full" as a high band (>= 95%) so the plug
appears when the battery is charged rather than requiring an exact 100%.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
hansimgamrandClaude Opus 4.8 0c72b517e8 Add charging indicator to companion_radio battery icon
Show a small lightning-bolt icon to the left of the battery indicator on
the ui-new home screen while the device is externally powered, and a plug
icon once the battery reads full. The bolt/plug sits beside the battery so
the fill bar stays clean and uninterrupted. When a buzzer is present, the
mute icon shifts one slot further left so the two never overlap.

Charging state is derived from board.isExternalPowered(), so this works on
any board that reports external power (e.g. the nRF52 VBUS-detect path).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
liamcottle b123971e21 fix for 3-byte paths passed to CMD_SEND_RAW_DATA 2026-08-19 18:59:24 +12:00
Huw Duddy eea89dfd1c Merge pull request #3235 from meshcore-dev/send-raw-direct-fix
Fix for CMD_SEND_RAW_DATA and multi-byte paths
2026-08-19 11:32:34 +10:00
fdlamotte ed227b9cb6 Merge pull request #3180 from fdlamotte/thinknode_m8
thinknode_m8: initial support

adds some functionalities to ui_task and epddisplay:

epd display, 
- supports screen off, and clear screen
- supports forcing full refresh every N partial refreshes (off by default, configured to 60 for M8)

ui_task
- UI_SHOW_CLOCK flag to display clock on first screen
- rotary button can act like joystick (with regards to Enter key), defaults to old config for existing nodes
- screen off on long press when using rotary button (very handy for the watch)
2026-08-18 09:33:42 -04:00
Rastislav Vysoky d1a2a0c20b repeater: set loop.detect to minimal as default for new installs 2026-08-18 14:56:58 +02:00
Scott Powell 44bbf74fbf Fix for CMD_SEND_RAW_DATA and multi-byte paths 2026-08-18 13:11:15 +10:00
Florent c54139f7db M8: preview messages up to 164 cars 2026-08-17 09:24:17 -04:00
entr0p1 11a02eeaba Duplicate MAX_CLIENTS definition
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.

This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).

Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-17 23:01:52 +10:00
Scott Powell cad602e416 * version 1.17.1 2026-08-14 22:19:19 +10:00
Scott Powell 5ff2d7109b * commenting out the load/save of the fem_ properties, until they can be set 2026-08-14 16:30:12 +10:00
ripplebiz f8832af086 Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebiz d5949f93d8 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
Florent 109ed685b2 thinknode_m8: initial support 2026-08-11 17:37:35 -04:00
agessaman f82950f311 feat(companion_radio): add external FEM gain preferences for RX and TX for companions
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
Scott Powell 68dedd3e96 * version 1.17.0 2026-08-09 15:14:46 +10:00
Hacuchino-hash 4160dfbb87 Fix X1 charge status LED always showing charged 2026-08-07 08:08:08 -05:00
ripplebiz 3bfca7b79d Merge pull request #3122 from Hacuchino-hash/x1-notifications
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-07 15:26:33 +10:00
agessaman 2eb7feffe0 fix(station-g3): expose FEM gain preferences 2026-08-06 15:29:14 -07:00
Hacuchino-hash dc8e2d6745 Add SPA06 barometer telemetry and charge status LED for MeshTracker X1 2026-08-06 07:27:05 -05:00
Hacuchino-hash f8ea866b1f Add RGB LED and haptic notifications for SenseCAP MeshTracker X1 2026-08-06 07:27:05 -05:00
liamcottle 3da5f1d4c5 disable cad on companion until it's configurable 2026-08-07 00:19:18 +12:00
ripplebiz 8bf182fb41 Merge pull request #3115 from oltaco/meshnology_w12
Add support for Meshnology W12 and LR2021 Wrapper
2026-08-05 15:04:00 +10:00
taco cb7b158931 LR2021: auto-LDRO for side detectors 2026-08-05 14:23:32 +10:00
taco 5687ba3f87 LR2021 multi-SF support (side detectors) 2026-08-05 14:23:32 +10:00
ViezeVingertjes 4820f0916d Merge remote-tracking branch 'upstream/dev' into fix/scoped-reply-routing
# Conflicts:
#	examples/simple_repeater/MyMesh.cpp
2026-08-04 11:49:58 +02:00
ViezeVingertjes 34156ddb11 Fix replies dropped when flood.max.unscoped is low 2026-08-03 22:57:12 +02:00