Scott Powell
df8e962998
Merge branch 'dev'
2026-10-15 19:42:40 +11:00
Scott Powell
a4f1601df3
* version 1.18.0
2026-10-15 19:42:01 +11:00
ripplebiz
77889e61dc
Merge pull request #3596 from recrof/wifi-companion-boards
...
added dynamic wifi to: heltec wsl3, v4r8, wireless paper; rak 3112; seeed xiao s3 (wio)
2026-10-15 19:35:32 +11:00
Rastislav Vysoky
59663042a8
added dynamic wifi to: heltec wsl3, v4r8, wireless paper; rak 3112; xiao s3 (wio)
2026-10-15 09:57:31 +02:00
ripplebiz
69313d98ae
Merge pull request #2377 from fschrempf/dev
...
Disable NRF52 undervoltage bootlock feature
2026-10-15 15:02:12 +11:00
Liam Cottle
ac25e7d956
Merge pull request #3591 from liamcottle/feature/companion-ble-wifi
...
Add WiFi support to Heltec v3 and v4 BLE variants
2026-10-14 20:23:11 +13:00
liamcottle
3448d06943
rework companion ui for ip address so it fits in multi interface variants
2026-10-14 16:29:41 +13:00
liamcottle
bcc5ccfbf0
enable wifi interface for heltec v4 ble variant
2026-10-14 15:16:55 +13:00
liamcottle
18acb44839
enable wifi interface for heltec v3 ble variant
2026-10-14 15:05:00 +13:00
Liam Cottle
cafc5b3bb4
Merge pull request #3589 from meshcore-dev/remove-room-repeater
...
Room: "set repeat" CLI now deprecated
2026-10-14 14:27:54 +13:00
Scott Powell
174582e8a1
* only 'repeat on' now intercepted
2026-10-14 12:21:38 +11:00
ripplebiz
5ec71b8abf
Merge pull request #3575 from agessaman/feat/lr1121-dual-band-power
...
LR1121: keep TX power valid across sub-GHz and 2.4 GHz
2026-10-14 12:04:47 +11:00
ripplebiz
1726ff0e99
Merge pull request #3574 from agessaman/feat/waveshare-esp32s3-lr1121
...
feat(variants): add Waveshare ESP32-S3-LR1121
2026-10-14 12:00:11 +11:00
Scott Powell
5f2deeb875
* Room: "set repeat" CLI now deprecated
2026-10-14 11:48:58 +11:00
ripplebiz
1c3d50fce7
Merge pull request #3573 from meshcore-dev/ack-timing-fix
...
ACK forwarding timing fix
2026-10-13 15:48:29 +11:00
ripplebiz
e18b3855ce
Merge pull request #3568 from meshcore-dev/zero-scope
...
Treat transport code 0 the same as un-scoped.
2026-10-13 15:48:02 +11:00
agessaman
58721ae6fb
fix(radiolib): keep LR1121 tx power valid across sub-GHz and 2.4 GHz
...
- Clip requested power to the active PA's range instead of failing. A
stored 22 dBm was rejected at 2.4 GHz (HF PA max 13 dBm), and since
setTxPower ignores errors the sub-GHz PA stayed configured.
- Re-apply the requested power after every successful retune: PA choice
depends on the band, and set radio / tempradio only call setParams.
2026-10-11 21:07:05 -07:00
agessaman
223389e936
feat(variants): add Waveshare ESP32-S3-LR1121
...
ESP32-S3FH4R2 (4MB flash, 2MB PSRAM, native USB-CDC) with an LR1121.
Pins, the DIO5/DIO6 RF switch table and the 1.8 V TCXO follow the HF
schematic and Waveshare's examples. Envs: repeater, room server,
companion USB/BLE and KISS modem, all on min_spiffs so roles share one
partition layout.
Only RFO_HP_LF is wired (R4 on RFO_LP_LF is not fitted), so the new
opt-in LR1121_FORCE_HP_PA flag keeps RadioLib on the HP PA at <= 14 dBm,
where it would otherwise select the unconnected LP PA.
2026-10-11 20:51:18 -07:00
Scott Powell
7369c64752
* ACK forwarding (in direct mode) had zero delay
2026-10-12 10:44:42 +11:00
Scott Powell
68b8163fe7
* treat transport code 0 the same as un-scoped.
2026-10-08 19:56:45 +11:00
Liam Cottle
83b1dccc13
Merge pull request #3561 from quyenlt298/nelos-groupdata-allocation
...
Add Nelos allocation for GroupData
2026-10-07 20:41:54 +13:00
quyenlt298
f7b2acf2a0
Add Nelos allocation for GroupData
2026-10-07 13:09:36 +07:00
Liam Cottle
aa2ba5aea7
Merge pull request #3559 from syssi/streamline-ota-ble-name
...
Use consistent `_OTA` suffix for nRF52 OTA BLE names
2026-10-07 12:16:50 +13:00
Sebastian Muszynski
2546d47055
Use consistent _OTA suffix for nRF52 OTA BLE names
2026-10-06 18:50:15 +02:00
Liam Cottle
aaf44308af
Merge pull request #3538 from meshcore-dev/hidden-repeater
...
Hidden repeater
2026-10-04 20:10:43 +13:00
Scott Powell
48aae4072d
* don't respond to DISCOVER requests if node has adverts turned off. (isHiddenNode())
2026-10-04 15:02:00 +11:00
Huw Duddy
2b5da0785b
Merge pull request #3533 from oltaco/fix/bad-comment-format
...
Fix bad comment format
2026-10-02 07:46:36 +10:00
taco
c10ea278ff
tidy: remove old commented Bluefruit.autoConnLed(false)
2026-10-02 07:40:42 +10:00
taco
ec565e06bf
fix bad comment format
2026-10-02 07:35:34 +10:00
Huw Duddy
a531441def
Merge pull request #2838 from benskigomez/fix/gps-cold-start-detection
...
GPS: poll up to 5s for cold-start detection instead of a single 1s check
2026-10-01 23:52:16 +10:00
Huw Duddy
e77c10976f
Merge pull request #3128 from bplein/feature/ble_led_disable
...
Allow for build-time macro to disable the bluetooth LED
2026-10-01 23:51:04 +10:00
Huw Duddy
bad907cf02
Merge pull request #3531 from meshcore-dev/revert-3411-patch-3
...
Revert "Fix Heltec Mesh Node T1 GNSS pins"
2026-10-01 22:19:32 +10:00
Huw Duddy
e616e3c942
Revert "Fix Heltec Mesh Node T1 GNSS pins"
2026-10-01 22:17:44 +10:00
Huw Duddy
3b126edd48
Merge pull request #3411 from Avamander/patch-3
...
Fix Heltec Mesh Node T1 GNSS pins
2026-10-01 20:31:38 +10:00
Huw Duddy
f0140e0a6c
Merge pull request #2065 from robekl/fix-t1000e-sensor-power-pin
...
Fix T1000-E sensor power pin mapping
2026-10-01 20:04:07 +10:00
Huw Duddy
92ef99de94
Merge branch 'dev' into fix-t1000e-sensor-power-pin
2026-10-01 19:57:50 +10:00
Huw Duddy
49a79dc8db
Merge pull request #2719 from jirogit/fix/techo-lite-flash-device
...
fix(techo-lite): remove duplicate EXTERNAL_FLASH_DEVICES definition
2026-10-01 00:41:23 +10:00
Huw Duddy
63166e9aa4
Merge pull request #3001 from Szetya/patch-1
...
Fix T-Echo Lite GPS pins
2026-10-01 00:38:23 +10:00
Huw Duddy
e54fb5275a
Merge pull request #3301 from beala/beala/fix-t1-clock
...
Fix clock on Heltec T1: Do not misidentify IMU as an RTC
2026-09-30 23:46:32 +10:00
Huw Duddy
63924e7f7c
Merge pull request #3155 from TadyTheFish/enable-ina226-promicro
...
Enable INA226 support for ProMicro nRF52840
2026-09-30 23:23:35 +10:00
ripplebiz
cd9565be3a
Merge pull request #3525 from oltaco/airoha-sleep
...
Use Airoha AG3335 backup mode sleep for faster GPS fix time
2026-09-30 12:32:44 +10:00
Liam Cottle
67ecf94491
Merge pull request #3528 from liamcottle/docs/radio-presets
...
Add documentation for radio presets
2026-09-30 14:56:20 +13:00
liamcottle
556140c802
add radio preset docs
2026-09-30 14:52:58 +13:00
Huw Duddy
f352ceaf3e
Merge pull request #2472 from emkZero/variant-techo-lite-usb-companion
...
variants: USB Companion variant for LilyGo T-Echo Lite
2026-09-29 23:00:41 +10:00
Huw Duddy
d07e11d7ed
Merge pull request #3495 from meshcore-dev/increase-max-search-results
...
increased MAX_SEARCH_RESULTS to 24. (was 8)
2026-09-29 20:42:48 +10:00
taco
ed1a763c49
T1000e GPS: use RTC backup for faster fix
2026-09-29 20:16:32 +10:00
taco
58dac7899b
MeshTracker X1 GPS: use RTC backup for faster fix
2026-09-29 20:14:19 +10:00
taco
3f1057c9a0
feat: add AirohaSleep.h helper for faster fix on AG3335 based GPS
2026-09-29 20:12:08 +10:00
taco
b463f4dbd1
feat: add waitFor() and drain() to LocationProvider to support sending commands to GPS
2026-09-29 20:10:51 +10:00
Liam Cottle
74d290f40c
Merge pull request #1896 from weebl2000/robust-time-esp32
...
Keep time in RTC slow memory, prevents date dropping to 1970 date after crash/watchdog/brownout reset on ESP32
2026-09-28 23:13:49 +13:00
Liam Cottle
02821f140c
Merge pull request #1809 from DanielNovak/fix-decrypt-block-alignment-check
...
Fix stack buffer overflow in MACThenDecrypt
2026-09-28 13:41:02 +13:00
Liam Cottle
76e64d87df
Merge pull request #3508 from marcelverdult/fix/rak11310-attach-dynamic-prefs
...
Fix RAK11310 build: add no-op attachDynamicPrefs()
2026-09-27 20:03:59 +13:00
fdlamotte
971b509f4f
Merge pull request #3202 from F4FPR/m6-power-observability
...
ThinkNode M6: expose external-power and charger state
2026-09-26 13:51:11 -04:00
fdlamotte
3d583d1a94
Merge pull request #3201 from F4FPR/gps-l76k-constellation-init-m6
...
GPS: configure L76K for GPS, BeiDou and GLONASS
2026-09-26 13:42:55 -04:00
fdlamotte
c7d398781f
Merge branch 'dev' into gps-l76k-constellation-init-m6
2026-09-26 13:38:40 -04:00
fdlamotte
699bdf78d0
Merge pull request #3200 from F4FPR/gps-diag-command
...
Add generic GPS UART and NMEA diagnostics
2026-09-26 13:34:34 -04:00
Marcel Verdult
2a26f08d74
Fix RAK11310 build: add no-op attachDynamicPrefs()
2026-09-26 14:07:28 +02:00
Liam Cottle
5d689196c9
Merge pull request #3497 from meshcore-dev/companion-telem-push
...
Companion Telemetry push support
2026-09-26 20:51:39 +12:00
Liam Cottle
90d30b67f5
Merge pull request #3500 from liamcottle/board/wio-tracker-l1-1watt
...
disable hibernate ui on 1watt wio tracker variant
2026-09-25 16:57:59 +12:00
liamcottle
c760aaca6a
disable hibernate ui on 1watt wio tracker variant
2026-09-25 16:55:17 +12:00
Scott Powell
5c8ee09635
* changed onUnhandledResponse() to return true if handled/consumed
...
* unhandled responses (eg. push telemetry) now sent to app as PUSH_CODE_BINARY_RESPONSE frames
2026-09-24 13:49:57 +10:00
Scott Powell
49d0dd3141
increased MAX_SEARCH_RESULTS to 24. (was 8)
...
Closes #3243
2026-09-24 13:35:27 +10:00
Liam Cottle
772edc1fcd
Merge pull request #3490 from liamcottle/fix/heltec-ct62
...
Fix Heltec CT62 boot loop
2026-09-23 17:48:04 +12:00
liamcottle
caff7790c4
fix heltec ct62 boot loop
2026-09-23 15:04:51 +12:00
Scott Powell
56b3c62e99
Merge commit 'c0124624c951cbc1a849009a119d57ec1d64d28e' into dev
2026-09-22 18:02:33 +10:00
Scott Powell
0812e09b40
missing board.loop() in companion, room server, kiss modem.
2026-09-22 18:01:15 +10:00
ripplebiz
c0124624c9
Merge pull request #3427 from Dom4n/feat/lr1110-dcdc-dev
...
Enable DC/DC for LR1110 radios
2026-09-22 17:57:09 +10:00
ripplebiz
deaacca580
Merge pull request #3131 from liekmarflow/feature/board-api-hooks
...
Add board loop hook for periodic work
2026-09-22 16:43:18 +10:00
Wolfram Keil
ba345d486c
Add board loop hook for periodic work
2026-09-22 08:01:48 +02:00
ripplebiz
30b3ab1203
Merge pull request #3464 from lbibass/lr1121_dcdc
...
LR1121 DC-DC & Misc Updates
2026-09-22 15:12:56 +10:00
ripplebiz
3eabf14df3
Merge pull request #3469 from Blake-Latchford/issue/3409/constrain-agc-interval
...
Constrain `agc.reset.interval` and allow intervals > 255s
2026-09-22 15:03:03 +10:00
Blake Latchford
e1877c015b
Constrain agc.reset.interval and allow intervals > 255s
2026-09-21 12:26:36 -04:00
fdlamotte
8c7c8f9150
Merge pull request #3468 from weebl2000/thinknodem4_fixes
...
Thinknode m4 - don't touch crystal and OTA name
2026-09-21 11:09:55 -04:00
Wessel Nieboer
7fe8287a32
Thinknode m4 - don't touch crystal and OTA name
2026-09-21 15:55:44 +02:00
fdlamotte
7b391a107e
Merge pull request #3436 from Blake-Latchford/wio-e5-fix
...
WIO-E5 Fix: Pin Radiolab for stm32 and replace ltoa
2026-09-21 05:50:12 -04:00
ripplebiz
191e5ee2f7
Merge pull request #3402 from meshcore-dev/sensor-improvements
...
Sensor improvements
2026-09-21 19:03:18 +10:00
Ev Lbibass
10e94e605d
update structure of LR1121 to match LR1110 files. Implement DC-DC on LR1121 radio. saves about 30% power consumption at idle.
2026-09-20 20:38:05 -04:00
fdlamotte
2fe0d8bab3
Merge pull request #3463 from fdlamotte/thinknode_m4
...
Thinknode m4
Doing the merge now as it doesn't touch anything outside its own variant dir and its board file ;)
2026-09-20 16:22:47 -04:00
Florent
05638d36b1
M4: Handle poweroff
2026-09-20 16:13:15 -04:00
Florent
ea2d2f36ce
m4: inital port
2026-09-20 15:25:18 -04:00
Blake Latchford
7fe4e78dc1
Add missing include, and revert removal of lota
2026-09-20 15:16:33 -04:00
Liam Cottle
789eefe5ff
Merge pull request #3108 from tjdownes/muzi-base
...
Add Muzi Base board support (Duo + Uno + SuperIO)
2026-09-20 22:56:32 +12:00
TJ Downes
8485a51c18
Use the default BLE TX power on Muzi Base
...
Drop BLE_TX_POWER=0 from the companion envs so they use the default of
4 dBm, like most other variants. The lower power was carried over from
the original Base Duo PR and real-world range is better at the default.
2026-09-20 03:46:25 -07:00
ripplebiz
d1f1af18e9
Merge pull request #3431 from meshcore-dev/abstract-ui-overhaul
...
Abstract UI overhaul
2026-09-20 18:08:29 +10:00
TJ Downes
ba0f4ec753
Address review feedback on Muzi Base support
...
- rename the board class and files to MuziBaseBoard
- uppercase the build flags (MUZI_BASE, MUZI_BASE_SUPERIO)
- name the superIO envs muzi_base_{duo,uno}_superIO_companion_radio_ble so
build.sh picks them up
- set MAX_CONTACTS to 350 like the other variants
- move the pin setup from initVariant() into MuziBaseBoard::begin()
2026-09-19 21:47:24 -07:00
Liam Cottle
f630267587
Merge pull request #3459 from liamcottle/board/thinknode-m7-wifi
...
Add wifi support to ThinkNode M7 BLE variant
2026-09-20 15:25:08 +12:00
liamcottle
e5dff422f3
add wifi support to thinknode m7 ble variant
2026-09-20 15:11:21 +12:00
Liam Cottle
1a54413514
Merge pull request #3458 from liamcottle/cli/wifi-pwd
...
Allow fetching configured wifi password via companion cli
2026-09-20 14:34:48 +12:00
liamcottle
66f2d49db6
allow fetching configured wifi password via companion cli
2026-09-20 14:22:13 +12:00
Liam Cottle
7043fb6db5
Merge pull request #3445 from mojoaxel/patch-1
...
docs: fix frame format tables
2026-09-20 10:26:16 +12:00
fdlamotte
1777d82ff9
Merge pull request #3449 from IoTThinks/MCdev-KeepLEDOffBeforePowerOff-20260919
...
Off LED before powering off for repeaters
2026-09-19 15:06:17 -04:00
Scott Powell
9456aac555
* misc
2026-09-19 20:13:18 +10:00
Kevin Le
39ba9ddb15
Off LED before powering off for repeater
2026-09-19 11:26:42 +07:00
Alexander Wunschik
98a2f07fa5
docs: fix frame format tables
2026-09-18 16:59:26 +02:00
Scott Powell
10f19b3cda
* fix for X1
2026-09-18 19:03:20 +10:00
Liam Cottle
d7365a9d3a
Merge pull request #3442 from liamcottle/feature/companion-cli-commands
...
added reboot, shutdown and poweroff to companion cli commands
2026-09-18 18:25:33 +12:00
liamcottle
6d2dcafdd0
added reboot, shutdown and poweroff to companion cli commands
2026-09-18 18:17:52 +12:00
Blake Latchford
ab315cae30
Pin Radiolab for stm32 and replace ltoa
...
The major rev from 19.x to 20.x breaks Radiolab, so pin it for now. This should fix the failing wio-e5-mini_repeater builds.
ltoa is removed upstream, so it was replaced with snprintf. The p[] buffer is always 16 bytes. Copy/paste for why claude thinks this is fine below, but also if this is broken it wouldn't be new.
```
exp2 in [23, 30] (int_part = mantissa << (exp2 - 23)): this is where int_part can reach its true max, up to 2,147,483,520 — 10 digits. That's what the snprintf bound of 11 (10 digits + NUL) is sized for. But in this branch frac_part is never assigned anything other than its initial 0, so only *p++ = '0' runs for the fraction — 1 char, not 7.
exp2 in [0, 22] (int_part = mantissa >> (23 - exp2)): this is the only branch where frac_part can also be nonzero and enter the 7-digit loop. Here int_part < 2^23 by construction, so it's capped at 7 digits, never 10.
```
2026-09-17 22:12:53 -04:00
Liam Cottle
e8e4213c48
Merge pull request #3382 from Blake-Latchford/wifi-disconnect-reason-logging
...
Extend WiFi disconnect logging to specify reason
2026-09-18 12:01:30 +12:00
Blake Latchford
6a711d0d6e
Extend WiFi disconnect logging to specify reason
...
Today if a user builds firmware with an incorrect WiFi SSID or password,
they get a generic `WiFi disconnected.` error message.
Extend logging to descirbe the reason that WiFi was disconnected.
I gathered the updated logs for the 3 scenarios below.
```
WiFi: Attempting manual WiFi reconnect...
WiFi: WiFi disconnected (reason=ASSOC_LEAVE). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
```
```
WiFi: WiFi disconnected (reason=NO_AP_FOUND). Flagging for reconnect...
```
```
WiFi: WiFi connected successfully!
WiFi: Got connection
```
2026-09-17 19:39:51 -04:00
Scott Powell
8e21a7cf3b
* more MyMesh::Listener interface hooks
2026-09-17 17:33:36 +10:00
Scott Powell
083c2d6277
* MyMesh::begin() refactor, removing last display concepts
2026-09-17 14:25:41 +10:00
Liam Cottle
7eb5e85581
Merge pull request #3430 from liamcottle/fix/3429
...
Add missing null display driver class for ThinkNode M7 ethernet variant
2026-09-17 15:54:28 +12:00
liamcottle
5ce6657546
add missing null display driver class for thinknode m7 ethernet variant
2026-09-17 15:52:46 +12:00
Scott Powell
e72c9c3759
* refactored the UI_DISCOVER_* feature
2026-09-17 13:45:33 +10:00
Jarosław Domański
70d0997901
Enable DC/DC in shared LR1110 initialization
2026-09-16 22:43:48 +02:00
Scott Powell
ab3cb11a18
* refactor: removed UITask dependency from MyMesh. New MyMesh::Listener interface
...
* UITask's are now a MyMesh task Listener
2026-09-16 21:03:44 +10:00
ripplebiz
86bbc119b2
Merge pull request #3393 from jbrazio/fix/static-pool-hardening
...
Improve null checks and index validation in StaticPoolPacketManager
2026-09-16 12:26:29 +10:00
ripplebiz
01c649ced9
Merge pull request #3248 from meshcore-dev/wio-tracker-L1-1W
...
WIO Tracker L1 1W variant
2026-09-16 11:50:09 +10:00
Liam Cottle
84373573eb
Merge pull request #3415 from und3rX1337/fix/config-key-digits
...
fix(config): allow digits in config keys
2026-09-16 11:07:31 +12:00
Und3r_1337
b0317bb3bb
fix(config): allow digits in config keys so keys like gr_1hop round-trip
2026-09-16 01:01:14 +02:00
Frieder Schrempf
29de3be4d8
Merge branch 'dev' into dev
2026-09-15 22:59:09 +02:00
Scott Powell
2afb5af26c
* refactor to support new Board::handleCommand(), and "get/set radio.fem.*" commands
2026-09-15 18:41:11 +10:00
Scott Powell
e27c46342b
Merge branch 'dev' into wio-tracker-L1-1W
2026-09-15 18:24:52 +10:00
Scott Powell
f189c7450c
* subscribe response now returns expiry_secs (not timestamp)
2026-09-15 17:17:48 +10:00
Avamander
da225c0c5e
Fix Heltec Mesh Node T1 GNSS pins
2026-09-14 17:53:50 +03:00
Huw Duddy
5da02cd478
Merge pull request #3344 from robekl/docs/fix-stale-defaults
...
docs: correct stale defaults and stale references across docs 🤖 🤖
2026-09-14 23:28:22 +10:00
Huw Duddy
e0c08b12a7
Merge pull request #3390 from jbrazio/feature/is-gps-detected
...
Add isGPSDetected() capability probe to SensorManager
2026-09-14 22:41:37 +10:00
Huw Duddy
fb8ec74a1c
Merge pull request #3002 from entr0p1/feat/nrf52-pwrmgt-v2_3-prep1
...
nRF52840 Power Management Stage 1 (Boot Lock) - v2.3 preparation work
2026-09-14 21:26:16 +10:00
Scott Powell
1c43df5cad
* fix for telemHasChanged()
2026-09-14 20:23:10 +10:00
TadyTheFish
ecdbb9ccf6
Enable INA226 support for ProMicro nRF52840
2026-09-13 08:27:48 +02:00
ripplebiz
5f8b300404
Merge pull request #3350 from Quency-D/fix-heltec_v4r8-lna
...
fix-heltec_v4r8-lna
2026-09-13 12:05:35 +10:00
ripplebiz
62a1a4c461
Merge pull request #3371 from agessaman/feat/tbeam-1w-thermal-fan
...
Add thermal fan control for T-Beam 1W
2026-09-13 12:01:37 +10:00
Scott Powell
b074e4f992
* request payload doco
2026-09-13 11:40:25 +10:00
Scott Powell
b86ae06288
* min_deltas now mandatory
2026-09-13 11:05:38 +10:00
c0f3bdeb60
Add Muzi Base board support (Duo + Uno + SuperIO)
...
One nRF52840 variant shared across both radios, picked per env: Duo runs
the LR1121, Uno the SX1262. Same PCB, only the radio and its DIO1 pin
change.
SuperIO adds the SH1107 OLED, GPS, buzzer and joystick. GPS is driven by
the 3-position mode switch (Mode 2 = on), polled live the way thinknode_m1
does it.
Five quick user-button presses power the unit off; a press wakes it back
on (arms the button as an nRF52 GPIO SENSE source before SYSTEMOFF).
Consolidates #2054 and andyshinn's shared-base/uno work, rebased on dev.
Co-authored-by: lbibass <ewdries02@gmail.com >
Co-authored-by: Andy Shinn <andys@andyshinn.as >
2026-09-12 05:41:26 -07:00
Scott Powell
074ec3fff1
* telemHasChanged() mod, so that only _specified_ min_delta values are considered.
2026-09-12 16:53:45 +10:00
ripplebiz
d91de3386e
Merge pull request #3389 from jbrazio/fix/set-af-validation
...
Validate set af input to prevent out-of-range airtime factors
2026-09-11 21:25:31 +10:00
ripplebiz
d52dd3214d
Merge pull request #3395 from jbrazio/fix/serial-command-clamp
...
[HIGH] Ensure command buffers stay NUL-terminated to prevent overflow
2026-09-11 14:09:24 +10:00
ripplebiz
de2759f71c
Merge pull request #3386 from tekk/fix/channel-data-payload-bound
...
fix(companion): gate CMD_SEND_CHANNEL_DATA payload on MAX_GROUP_DATA_LENGTH
2026-09-11 13:57:00 +10:00
João Brázio
133ef6ff54
Validate set af input to prevent out-of-range airtime factors
2026-09-10 09:17:37 +01:00
tekk
d5b4315672
fix(companion): gate CMD_SEND_CHANNEL_DATA payload on MAX_GROUP_DATA_LENGTH
...
Payloads of 166 or 167 bytes previously passed the frame-sized bound
(MAX_CHANNEL_DATA_LENGTH = 167) but were rejected by sendGroupData
against MAX_GROUP_DATA_LENGTH (165), causing ERR_CODE_TABLE_FULL (retry
later) to be returned instead of ERR_CODE_ILLEGAL_ARG.
Fixes #3345
2026-09-09 22:10:41 +02:00
Liam Cottle
9350f1dced
Merge pull request #3357 from skandragon/feat/picow-wifi-ble
...
Add WiFi to RPI PicoW (and perhaps others)
2026-09-09 21:55:22 +12:00
Liam Cottle
7840179324
Merge pull request #2971 from YoshiWalsh/fix/projectconfigurationgit
...
Fix Git error during project configuration
2026-09-09 20:08:37 +12:00
Yoshi Walsh
8adad96e86
Fix Git error during project configuration
...
Previously project configuration would fail with "fatal: couldn't find remote ref d541301" (git v2.55.0)
Per https://git-scm.com/docs/git-fetch#Documentation/git-fetch.txt-refspec , the <src> needs to be either a ref or a "**fully spelled** hex object name"
This requirement is also mentioned in this SO answer: https://stackoverflow.com/a/30701724
After this change, project configuration now succeeds.
219812
2026-09-09 17:42:35 +10:00
liamcottle
bc333d89fa
add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd
2026-09-08 22:54:50 +12:00
liamcottle
85ad99599d
tidy comments
2026-09-08 22:18:22 +12:00
liamcottle
5be7b3c4ba
simplify and remove 2 as a wifi enabled state
2026-09-08 21:30:17 +12:00
ripplebiz
0fa156f30d
Merge pull request #3379 from oltaco/LR2021-preamble-arm-fix
...
fix: LR2021 to use correct macro for IRQ_DETECTED in startReceive()
2026-09-08 18:13:15 +10:00
Scott Powell
a3ba885753
* refactor: LPP helpers moved to LPPData class
2026-09-08 17:55:02 +10:00
taco
a4efe91fe8
fix: LR2021 to use correct macro for IRQ_DETECTED in startReceive()
2026-09-08 16:35:31 +10:00
liamcottle
24b2e5e03d
allow remote management of wifi as user has cli permission
2026-09-08 18:33:37 +12:00
liamcottle
7eb95d62b1
simplify response message
2026-09-08 18:30:00 +12:00
liamcottle
170491b34c
allow toggling wifi enabled regardless of stored ssid
2026-09-08 18:25:34 +12:00
Wessel and Dan McGee
db07f52349
Update src/helpers/ESP32Board.h
...
Co-authored-by: Dan McGee <dpmcgee@gmail.com >
2026-09-07 11:16:09 +02:00
Wessel Nieboer
d683b178ed
Fix 1970 date after crash/watchdog/brownout reset on ESP32
...
Currently, time is only set to ~2024 when it powers on cleanly. When
time is lost, this results in time dropping to 1970. Save time as backup
to RTC slow memory. Should fix time staying accurate during brownouts
etc.
2026-09-07 11:16:08 +02:00
Scott Powell
d0f96becb1
* CLI: removed "sub" and "unsub" (cannot support via command line)
...
* _SUBSCRIBE: binary req/resp payload changes (now keeps supplied 'push_tag')
* Sensor: added MCU temperature support in telemetry
2026-09-07 13:56:47 +10:00
Michael Graff
1a664ab6c6
WiFi on/off tri-state: on when SSID set unless explicitly disabled; PicoW ships no default SSID
2026-09-06 22:18:00 -05:00
Michael Graff
ca3adef039
Default wifi.enabled to 0
2026-09-06 22:05:29 -05:00
Michael Graff
0bb10d3902
Add wifi.enabled pref and CLI; skip WiFi when disabled or SSID blank
2026-09-06 21:56:25 -05:00
Michael Graff
fe8d6147d4
Add get wifi.status and get wifi.ip CLI commands
2026-09-06 21:44:47 -05:00
Michael Graff
233a46efeb
Address review: per-variant wifi src, real SSID reply, rename PicoW env
2026-09-06 21:28:04 -05:00
Michael Graff
b0e7bc385a
Fix review findings on Pico W WiFi/BLE
2026-09-06 20:43:37 -05:00
Michael Graff
5344e73dec
Add BLE companion support for Pico W
2026-09-06 20:15:45 -05:00
ripplebiz
dd3a8c1d22
Merge pull request #3366 from recrof/companion-cli-fix-2
...
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-07 10:42:48 +10:00
Rastislav Vysoky
552351457c
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-06 15:14:35 +02:00
Michael Graff
b9fbf072ab
Fix config parser aborting on an empty object
...
'custom:{}' (a DynamicConfigSerializer with nothing set) hits EXPECT_KEY
with a '}' and returns TOK_ERROR, so loadSerial stops there and silently
drops every property after it. Nothing follows 'custom' in NodePrefs
today, so it goes unnoticed until you add one.
Also include stdlib.h, which Arduino.h was providing on-device but not
in the native test build.
2026-09-05 23:15:13 -05:00
Michael Graff
02cc250fc2
Address review findings on WiFi companion support
...
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
(cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
network
- teach build_as_lib.py where SerialWifiInterface moved
2026-09-05 23:15:13 -05:00
Michael Graff
0f0c1dc75a
Fix blocking WiFi connect on RP2040, log link state
...
arduino-pico's WiFi.begin() blocks for up to 2x its 15s timeout, which
stalled the mesh loop on every reconnect attempt; use beginNoBlock().
Log the IP when the link comes up, and the status code when retrying.
2026-09-05 23:15:13 -05:00
Michael Graff
48cc30777d
Allow WiFi credentials to be set at runtime
...
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
2026-09-05 23:15:13 -05:00
Michael Graff
676169b777
Add WiFi companion support for Pico W
...
SerialWifiInterface has no ESP32-specific code, so move it to
helpers/wifi and reuse it on RP2040. Guard the ESP32-only WiFi
event/auto-reconnect calls and poll link state on RP2040 instead.
2026-09-05 23:15:13 -05:00
Scott Powell
96866be339
* added region load/save support
...
* SUBSCRIBE now with timeout param (default 30 mins, max ~18 hours)
2026-09-05 15:59:29 +10:00
agessaman
0549a9f943
Fix T-Beam 1W fan races and remove PWM controls
2026-09-04 16:51:53 -07:00
agessaman
5933636214
feat: add T-Beam 1W thermal fan control
2026-09-04 16:03:41 -07:00
João Brázio
9c592b7ace
Add isGPSDetected() capability probe to SensorManager
...
Lets applications know whether a GPS was actually detected
(EnvironmentSensorManager reports its gps_detected state), e.g. to
hide GPS-dependent UI when no receiver is attached.
2026-09-04 21:04:20 +01:00
João Brázio
a4d1854a77
Improve null checks and index validation in StaticPoolPacketManager
2026-09-04 21:03:06 +01:00
João Brázio
dbb2aeee00
Ensure command buffers stay NUL-terminated to prevent overflow
...
The serial command buffers must stay NUL-terminated within their
bounds: if they ever aren't, strlen() can return >= sizeof(command)
and the read loop would index past the buffer. Additionally, a full
buffer now becomes a completed line (end-of-line marker placed
inside the buffer, NUL terminator kept) instead of overwriting the
terminator and silently corrupting the buffer for the next pass.
Applies to the serial CLI readers of the repeater, room server,
sensor and secure chat examples, and to the CLI rescue reader of
the companion example.
2026-09-04 20:01:39 +01:00
Scott Powell
595bf44beb
* sensor: CLI "sub" and "unsub" commands
2026-09-04 22:02:49 +10:00
Scott Powell
fa0c7b8a5a
* new: REQ_TYPE_SUBSCRIBE and REQ_TYPE_UNSUBSCRIBE
2026-09-04 15:13:17 +10:00
Quency-D
7624acb28a
fix-heltec_v4r8-lna
2026-09-03 17:57:09 +08:00
Scott Powell
90c6be0cbf
* default and reply scopes now applied
2026-09-03 14:09:15 +10:00
Robert Ekl
1d87776c02
docs: update stale repo URLs and build recipe
...
The project moved to meshcore-dev/meshcore, but two links still pointed at
ripplebiz/MeshCore: the GitHub Issues link in README and the git clone in the
FAQ build instructions.
Also fixes the FAQ build recipe:
- `pio run -e RAK_4631_Repeater` does not exist; the env is spelled
RAK_4631_repeater (variants/rak4631/platformio.ini:40).
- LORA_FREQ was given as 867.5; the default in [arduino_base] is 869.618
(platformio.ini:29). Reworded to point at the flag rather than a value that
drifts with the default preset.
- Renamed the venv so it no longer collides with the cloned directory name.
And one more env-name casing slip in the Raspberry Pi flashing instructions:
`Heltec_V3_companion_radio_ble` should be `Heltec_v3_...`. Release artifacts are
named directly from the env name (build.sh:147), and the two neighbouring
examples in the same block already use the lowercase spelling.
2026-09-02 11:38:06 -05:00
Robert Ekl
c2860177dd
docs: remove non-existent set dutycycle from Terminal Chat CLI
...
3d792e7b added get/set dutycycle to CommonCLI and updated both CLI docs, but
Terminal Chat does not use CommonCLI -- simple_secure_chat/main.cpp:479-507 has
its own `set` handler supporting only af, name, lat, lon, tx and freq. Typing
`set dutycycle` there returns "ERROR: unknown config".
Restores `set af` as the documented command, points readers at cli_commands.md
for the roles that do have dutycycle, and documents `help`
(simple_secure_chat/main.cpp:510), which the client implements but the doc
never listed.
2026-09-02 11:38:06 -05:00
Robert Ekl
e98254afdc
docs: correct pwrmgt CLI behaviour on unsupported boards
...
The doc claimed every pwrmgt command except `get pwrmgt.support` returns
"ERROR: Power management not supported" when NRF52_POWER_MANAGEMENT is not
defined. `get pwrmgt.bootreason` is not inside the #ifdef (CommonCLI.cpp:787)
and answers on all boards; only pwrmgt.source and pwrmgt.bootmv are gated.
2026-09-02 11:38:06 -05:00
Robert Ekl
e00f1b5451
docs: fix channel index range, secret semantics and payload limit
...
Three factual errors in companion_protocol.md:
- The channel-datagram payload cap was given as 163 (MAX_FRAME_SIZE - 9 when
MAX_FRAME_SIZE was still 172). It went 172 -> 176 in 22510ab8 , but simply
updating the arithmetic to 167 would be worse than the stale value: 167 is
only the host-frame bound (MyMesh.cpp:1265). The radio-side bound is
MAX_GROUP_DATA_LENGTH = 184 - 16 - 3 = 165 (MeshCore.h:21, enforced at
BaseChatMesh.cpp:544). A 166- or 167-byte payload passes the frame check,
fails the radio check, and comes back as ERR_CODE_TABLE_FULL -- which this
same doc describes as "retry later", so a conforming client would retry a
permanently failing send forever. Documents 165 as the limit to enforce and
calls out the 166-167 band explicitly.
- Channel index was documented as 0-7 throughout. The bound is
MAX_GROUP_CHANNELS (BaseChatMesh.cpp:927,936), which is 40 on most current
variants, 8 on some and 1 on others. Clients should read max_channels from
byte 3 of PACKET_DEVICE_INFO instead. Index 0 is pre-populated with the
built-in Public channel but is not reserved.
- The secret field was documented as "all zeros" for public channels. The
firmware always hashes a real 16-byte key; the public channel ships with
izOH6cXN6mrJ5e26oRXNcg== (companion_radio/MyMesh.cpp:111,1040). An all-zero
secret is not a private channel and not an inert one: SHA256 over 16 zero
bytes is a fixed global constant, giving a well-known channel with an
all-zero AES key. searchChannelsByHash skips unnamed slots for exactly this
reason (BaseChatMesh.cpp:392-401), but a named slot with a zero secret is
not skipped and will absorb null-key group traffic from any node. Now
documented as something not to do.
2026-09-02 11:38:06 -05:00
Robert Ekl
f163c49339
docs: correct stale CLI default values
...
Five "Default:" values in cli_commands.md no longer matched the firmware:
- radio / freq: the default preset moved to EU/UK (Narrow) in e80c91eb ,
changing LORA_FREQ/BW/SF from 869.525/250/11 to 869.618/62.5/8
(platformio.ini:29-31). No variant overrides these, and LORA_CR is 5
on every path, so the full preset is 869.618,62.5,8,5.
- flood.advert.interval: raised to 47 hours in 3e0b9da4 for both repeater
and room server; sensor leaves it disabled.
- advert.interval: prefs store minutes/2 and the getter doubles on read, so a
factory-fresh node reports 2, not 0. But savePrefs() zeroes any interval
below the 60 minute minimum (CommonCLI.cpp:162-165), and it is called from
every `set` handler -- so the value becomes 0 as soon as the node is
configured. Documented both states, since neither alone is the whole story.
- direct.txdelay: repeater defaults to 0.3, room server and sensor to 0.2.
Sources: platformio.ini:29-31, simple_repeater/MyMesh.cpp:893,903-904,
simple_room_server/MyMesh.cpp:650,661-662, simple_sensor/SensorMesh.cpp:716,
726-727, CommonCLI.cpp:162-165,680-681.
2026-09-02 11:31:24 -05:00
Liam Cottle
4606918fad
Merge pull request #3319 from oltaco/w12_txpower
...
Fix Meshnology W12 TX power
2026-09-01 23:06:58 +12:00
Liam Cottle
2cad3e1561
Merge pull request #3329 from reinforce/tz_offset
...
companion: get/set timezone offset for clock
2026-09-01 22:56:19 +12:00
Aleksei Mamlin
c9e5cc15ba
companion: get/set timezone offset for clock
...
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com >
2026-08-31 09:08:22 +03:00
fdlamotte
d51bd9acca
Merge pull request #3279 from fdlamotte/node_discover_ui
...
Node discover UI
2026-08-30 19:51:02 -04:00
fdlamotte
dcd931fa2e
Merge branch 'dev' into node_discover_ui
2026-08-29 11:02:58 -04:00
taco
3739ce91cf
fix Meshnology W12 TX power
2026-08-29 15:22:54 +10:00
Scott Powell
5c32c46219
New TXT_TYPE_CLI_COMMAND (3)
2026-08-28 13:12:59 +10:00
liamcottle
599ecfcb65
fix cad cli command on companion
2026-08-27 19:05:18 +12:00
Liam Cottle
5edc936301
Merge pull request #3298 from meshcore-dev/companion-cli
...
Companion CLI
2026-08-27 18:17:10 +12:00
Alex Beal
8536390800
Fix: Do not misidentify IMU as an RTC on Heltec T1
...
The T1 has an ICM-42607-P IMU with the same address as a DS3231 RTC.
This completely breaks the clock on the T1. Reading the time results in
a garbage value, causing all sorts of strange issues. The time never
advances, which breaks logging in to repeaters (due to their time-based
replay protection).
This simply disables the probe on the I2C line. The DS3231 doesn't have
a WHO_AM_I register that could be used to prevent misidentifying it, so
this simpler fix is used.
2026-08-25 15:00:45 -06:00
Scott Powell
3d4eadd2cd
* fix for RPI Picow
2026-08-25 19:04:32 +10:00
Scott Powell
6239b462f2
* companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented.
2026-08-24 20:44:17 +10:00
Scott Powell
55855f4cae
* DynamicConfigSerializer fixes, and unit tests
2026-08-24 19:42:55 +10:00
Liam Cottle
e6d9abee21
Merge pull request #3275 from liamcottle/gps/rak3401
...
Fix PA on RAK3401 when GPS missing
2026-08-24 19:52:10 +12:00
Liam Cottle
a0bcdb2438
Merge pull request #3282 from recrof/patch-3
...
FAQ: Fixed instructions on wiping and resetting nrf52 devices
2026-08-24 19:49:40 +12:00
Scott Powell
71deb27b7e
* prefs, custom dirty state
2026-08-24 17:22:15 +10:00
Scott Powell
5a7bc507d1
* new DynamicConfigSerializer
...
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
Huw Duddy
b880ab1cb6
Merge pull request #3290 from liamcottle/feature/ui-no-hibernate
...
add UI_NO_HIBERNATE build flag to disable hibernate screen
2026-08-24 13:40:47 +10:00
liamcottle
2136978378
add UI_NO_HIBERNATE build flag to disable hibernate screen on wio tracker l1
2026-08-24 13:45:19 +12:00
Rastislav Vysoky
41d63f83eb
FAQ: Fixed instructions on wiping and resetting nrf52 devices
2026-08-23 20:13:12 +02:00
Scott Powell
b5b20a7738
* refactored 'FEM' commands for HeltecTrackerV2 & HeltecV4
2026-08-24 02:16:18 +10:00
Scott Powell
8c73c948b4
* T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
...
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Florent
a9c977db51
ui: opt-out for discover screen
2026-08-23 10:42:00 -04:00
Scott Powell
ae61e1a61c
support for CMD_SEND_TXT_MSG and new TXT_TYPE_CLI_COMMAND
2026-08-23 22:49:45 +10:00
Scott Powell
644e68d0ff
* new TXT_TYPE_CLI_COMMAND (3)
2026-08-23 22:04:05 +10:00
Scott Powell
2c43bf1ba1
legacy queueMessage() case, eg. repeater replies
2026-08-23 20:07:28 +10:00
Scott Powell
a29ccab178
onCommandDataRecv() use '>' prefix for CLI replies.
2026-08-23 20:03:49 +10:00
Scott Powell
df507deac9
"Unknown command" replies
2026-08-23 19:35:43 +10:00
Scott Powell
f66ed7ca88
* CommonRadioPrefs refactors done
2026-08-23 17:30:30 +10:00
Scott Powell
414e91fd5d
* adding new CommonRadioPrefs
...
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
liamcottle
1266fc058f
don't toggle io pins on rak3401 when probing gps
2026-08-23 14:14:45 +12:00
ripplebiz
219a5d1cc1
Merge pull request #3268 from liamcottle/rak/gps
...
Add support for RAK12500 and RAK12501 GPS on RAK3401
2026-08-22 14:35:21 +10:00
liamcottle
f58c7293e2
add support for rak12500 and rak12501 gps on rak3401
2026-08-22 16:16:32 +12:00
Florent
2678be75bd
ui: repeater discover screen
2026-08-21 18:24:46 -04:00
entr0p1
93bd279d34
Duplicate MAX_CLIENTS definition
...
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.
This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).
Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-21 15:11:57 -04:00
Scott Powell
5eaf5a86fb
* initial wiring/routing of CLI commands to companion (either via app/serial interface, or remotely via txt message)
2026-08-21 20:55:57 +10:00
ripplebiz
1a8d860d8d
Merge pull request #3233 from entr0p1/fix/centralise-max-clients
...
Fix duplicate MAX_CLIENTS definition
2026-08-20 14:09:30 +10:00
ripplebiz
acc68d4fd4
Merge pull request #3234 from agessaman/fix/sensors-bosch-alt-i2c-address
...
Fix I2C address claiming and probe both BMP/BME addresses
2026-08-20 14:01:49 +10:00
ripplebiz
1e2e577885
Merge pull request #3236 from DominikTyrala/fix/c3_partition_setup
...
Fix Seeed C3 radio BLE exceeding flash size
2026-08-20 13:38:26 +10:00
ripplebiz
1f8a227e4b
Merge pull request #3249 from dl9sau/patch-1
...
Skip empty channel slots in searchChannelsByHash
2026-08-20 13:11:02 +10:00
ripplebiz
d225d29384
Merge pull request #3250 from hansimgamr/feat/t114-charging-indicator
...
Add charging indicator to companion_radio battery icon
2026-08-20 12:59:26 +10:00
hansimgamr and Claude Opus 4.8
cdff1a5f4f
Show plug at >=95% instead of exactly 100%
...
Boards without a charge-complete signal only infer "full" from voltage, and
a real pack rarely reads the full BATT_MAX_MILLIVOLTS (4.2V), so the plug icon
was effectively never shown. Treat "full" as a high band (>= 95%) so the plug
appears when the battery is charged rather than requiring an exact 100%.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com >
2026-08-19 12:44:41 -04:00
hansimgamr and Claude Opus 4.8
0c72b517e8
Add charging indicator to companion_radio battery icon
...
Show a small lightning-bolt icon to the left of the battery indicator on
the ui-new home screen while the device is externally powered, and a plug
icon once the battery reads full. The bolt/plug sits beside the battery so
the fill bar stays clean and uninterrupted. When a buzzer is present, the
mute icon shifts one slot further left so the two never overlap.
Charging state is derived from board.isExternalPowered(), so this works on
any board that reports external power (e.g. the nRF52 VBUS-detect path).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com >
2026-08-19 12:44:41 -04:00
Thomas Osterried
cedc9977c2
Skip empty channel slots in searchChannelsByHash
...
An unconfigured slot has an all-zero secret, so it matches null-key group traffic (a sender with an unset PSK). The zero-key MAC validates against the empty slot and the foreign message is delivered as if it belonged to that channel — every node with a free slot is a null-key sink. Skip empty slots.
2026-08-19 09:35:25 +02:00
liamcottle
b123971e21
fix for 3-byte paths passed to CMD_SEND_RAW_DATA
2026-08-19 18:59:24 +12:00
Scott Powell
0927801deb
WIO Tracker L1 1W variant
2026-08-19 15:29:19 +10:00
Huw Duddy
eea89dfd1c
Merge pull request #3235 from meshcore-dev/send-raw-direct-fix
...
Fix for CMD_SEND_RAW_DATA and multi-byte paths
2026-08-19 11:32:34 +10:00
ripplebiz
6d8f16fabb
Merge pull request #3246 from liamcottle/update/toolchain
...
Update GCC toolchain for nRF52 boards to fix builds on Raspberry Pi
2026-08-19 11:30:08 +10:00
liamcottle
deb5e735b8
updated gcc toolchain for nrf52 boards
2026-08-19 12:07:29 +12:00
F4FPR
3f2751ac50
Update ThinkNodeM6Board.h
2026-08-18 19:40:42 +02:00
F4FPR
5a6e12200c
Update CommonCLI.cpp
2026-08-18 19:39:21 +02:00
F4FPR
0c96a4fa98
Update MeshCore.h
2026-08-18 19:38:23 +02:00
fdlamotte
ed227b9cb6
Merge pull request #3180 from fdlamotte/thinknode_m8
...
thinknode_m8: initial support
adds some functionalities to ui_task and epddisplay:
epd display,
- supports screen off, and clear screen
- supports forcing full refresh every N partial refreshes (off by default, configured to 60 for M8)
ui_task
- UI_SHOW_CLOCK flag to display clock on first screen
- rotary button can act like joystick (with regards to Enter key), defaults to old config for existing nodes
- screen off on long press when using rotary button (very handy for the watch)
2026-08-18 09:33:42 -04:00
ripplebiz
d9c63d4b43
Merge pull request #3238 from recrof/meshadventurer-board-relocate
...
fix: move MeshadventurerBoard.h to variants/meshadventurer
2026-08-18 23:04:35 +10:00
ripplebiz
24b3119bc8
Merge pull request #3239 from recrof/default-loop-detect-minimal
...
repeater: set `loop.detect` to `minimal` as default for new installs
2026-08-18 23:03:10 +10:00
Rastislav Vysoky
d1a2a0c20b
repeater: set loop.detect to minimal as default for new installs
2026-08-18 14:56:58 +02:00
Rastislav Vysoky
053fa3eb83
fix: move MeshadventurerBoard.h to correct location
2026-08-18 13:51:55 +02:00
Dominik Tyrala
630fa35604
Fixes BLE exceeding flash size
2026-08-18 09:34:34 +02:00
Scott Powell
44bbf74fbf
Fix for CMD_SEND_RAW_DATA and multi-byte paths
2026-08-18 13:11:15 +10:00
agessaman
b4917d6027
fix(sensors): probe BMP/BME at both 0x76 and 0x77
...
Grove and other Bosch modules strap SDO high, so the 0x76-only table
never initialized them. Add an alternate-address entry per Bosch sensor;
the bus scan still gates every probe, and all four drivers verify a chip
ID before claiming an address.
Each sensor type has a single static driver instance, so skip an entry
whose query is already active: the alternate address is a fallback, not
a second device.
2026-08-17 14:59:59 -07:00
agessaman
1a82394d72
fix(sensors): claim an I2C address after a successful init
...
Several table entries share an address and not every driver verifies a
chip ID: INA226::begin() only checks that the address ACKs, so an SHT4x
at 0x44 was also registered as an INA226 and reported junk current on a
second channel. Mark the address consumed once a driver initializes it
so later entries cannot re-claim the same device.
2026-08-17 14:58:49 -07:00
Florent
cec44c05dd
gxepd: do full refresh before screen off ... so wakes quicker ;)
2026-08-17 09:41:51 -04:00
Florent
c54139f7db
M8: preview messages up to 164 cars
2026-08-17 09:24:17 -04:00
Huw Duddy
22bc13804c
Merge pull request #3218 from fkallay1/fix/lr2021-set-tx-power-rx-stall
...
Fix LR2021 occasionally stopping reception after a TX power change
2026-08-17 23:20:32 +10:00
Huw Duddy
debbbb81c0
trimmed comment
2026-08-17 23:16:01 +10:00
entr0p1
11a02eeaba
Duplicate MAX_CLIENTS definition
...
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.
This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).
Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-17 23:01:52 +10:00
Florent
3f4be26003
gxepddisplay: better handling of full refresh (no faint partial afterwards !!!)
2026-08-16 11:40:13 -04:00
Fedor Kallay
aa2292459f
fix(lr2021): setTxPower() could leave the receiver down until reboot
...
RadioLibWrapper::setTxPower() called setOutputPower() and nothing else. On
LR2021 that writes the PA config and TxParams, which are standby-only commands,
and it never re-arms the receiver.
This only affects LR2021 boards. recvRaw() has:
#if defined(USE_LR2021)
state = STATE_RX; // LR2021 stays in Rx after readData
#else
state = STATE_IDLE; // need another startReceive()
#endif
so on SX126x the next recvRaw() re-arms Rx anyway and the write is harmless,
while on LR2021 startReceive() is never called again on its own. A 'set tx'
issued while the radio was listening could therefore stop reception until the
next reboot. Observed a few times on an LR2021 repeater; recovery required a
power cycle.
Dispatcher's stuck-radio check does not catch it: isInRecvMode() reports the
wrapper's own `state` flag rather than the chip's actual mode, so it still
believes the radio is in Rx, and it only raises ERR_EVENT_STARTRX_TIMEOUT
without attempting recovery.
Fix: on LR2021, drop to standby via idle() before writing the PA config and let
checkRecv() re-arm Rx - the same pattern resetAGC() and
applySideDetectorConfig() already use. Other radios are left untouched.
Affects meshtracker_x1 and meshnology_w12 (both USE_LR2021).
Tested on hardware with an LR2021 repeater: six consecutive 'set tx' changes
(15/18/21/14/19/14), after which the radio kept receiving and forwarding
traffic (rawrx/rxpkts increasing, no missed IRQs). Noise-floor sampling also
kept updating, which only happens while state == STATE_RX.
2026-08-15 02:31:19 +02:00
Scott Powell
cad602e416
* version 1.17.1
2026-08-14 22:19:19 +10:00
Huw Duddy
54040eef43
Merge pull request #3206 from meshcore-dev/nrf-combine-rng-entropy
...
combine radio's entropy with CC310 RNG
2026-08-14 22:09:26 +10:00
Scott Powell
10b6552872
* combine radio's entropy with CC310 RNG
2026-08-14 17:46:43 +10:00
Huw Duddy
0523076479
Merge pull request #3203 from meshcore-dev/companion-fem-pref-fix
...
commenting out the load/save of the fem_ properties
2026-08-14 16:44:59 +10:00
Scott Powell
c97e40d15d
* unit test no longer valid
2026-08-14 16:42:54 +10:00
Scott Powell
5ff2d7109b
* commenting out the load/save of the fem_ properties, until they can be set
2026-08-14 16:30:12 +10:00
F4FPR
f34e1fcb9b
Update variant.h
2026-08-14 00:45:22 +02:00
F4FPR
c382f05c30
Update ThinkNodeM6Board.h
2026-08-14 00:44:43 +02:00
F4FPR
a6c4100711
Update ThinkNodeM6Board.cpp
2026-08-14 00:44:16 +02:00
F4FPR
f15e7fd8a9
Update CommonCLI.cpp
2026-08-14 00:43:33 +02:00
F4FPR
3c155e4cce
Update MeshCore.h
2026-08-14 00:42:57 +02:00
F4FPR
c1143fdf14
Update MicroNMEALocationProvider.h
2026-08-14 00:20:11 +02:00
F4FPR
ae9c16efce
Update CommonCLI.cpp
2026-08-13 23:52:58 +02:00
F4FPR
d86cb7355b
Update MicroNMEALocationProvider.h
2026-08-13 23:52:31 +02:00
F4FPR
ad33137b71
Update LocationProvider.h
2026-08-13 23:52:02 +02:00
ripplebiz
f8832af086
Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
...
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebiz
2581baaaa4
Merge pull request #3189 from oltaco/nrf52-unused-pin-sweep
...
Fix unused pin definitions on some NRF52 boards
2026-08-13 13:48:59 +10:00
taco
a80ddbf4e2
Fix LilyGo T-Echo Lite SPI pins
2026-08-13 00:53:58 +10:00
taco
d0ceba7976
Fix Heltec MeshPocket SPI pins
2026-08-13 00:15:34 +10:00
taco
0028bd9bec
Fix Heltec T1 pin definitions
...
SPI pins that are set to -1 cause OOB reads on NRF52. The unused Serial2 pin definitions were removed to avoid potential issues with the Uart framework.
2026-08-13 00:12:37 +10:00
ripplebiz
09933264fb
Merge pull request #3188 from oltaco/heltec-t096-pin-fix
...
Fix Heltec T096 Tx issue
2026-08-12 23:00:31 +10:00
taco
248e6a9fab
Heltec T096: fix PIN_SPI1_MISO
...
Setting SPI pins to values that are OOB of the g_ADigitalPinMap[] array causes OOB reads. This variant.h has pin 0 as 0xFF which passes through as NRFX_SPIM_PIN_NOT_USED.
2026-08-12 22:31:57 +10:00
taco
0f686aa3f1
Revert "t096 compiler layout workaround"
...
This reverts commit bdefc8d085 .
2026-08-12 22:28:36 +10:00
taco
920ee315ec
Revert "T096 PA_CTX pin direction workaround"
...
This reverts commit b13962d7de .
2026-08-12 22:28:05 +10:00
ripplebiz
6b79020bbd
Merge pull request #3185 from oltaco/fix-techo-card-txco-voltage
...
Set T-Echo Card TCXO voltage to 3.0
2026-08-12 18:13:44 +10:00
ripplebiz
d5949f93d8
Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
...
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
taco
309a04162e
set T-Echo Card TCXO voltage to 3.0
...
as per https://github.com/meshcore-dev/MeshCore/pull/3140 and https://github.com/Xinyuan-LilyGO/T-Echo-Lite/issues/14
2026-08-12 16:08:05 +10:00
ripplebiz
c913b0fec1
Merge pull request #3182 from oltaco/t096-tx-workaround
...
Workaround for Heltec T096 transmit issue
2026-08-12 14:49:32 +10:00
taco
b13962d7de
T096 PA_CTX pin direction workaround
2026-08-12 14:07:31 +10:00
taco
bdefc8d085
t096 compiler layout workaround
...
see https://github.com/meshcore-dev/MeshCore/issues/3151
2026-08-12 14:04:50 +10:00
ripplebiz
3dfbcf93b8
Merge pull request #3154 from fdlamotte/nrf52_hwcrypto_init
...
nrf52: call nRFCrypto.begin()/end() only once
2026-08-12 12:14:21 +10:00
Florent
109ed685b2
thinknode_m8: initial support
2026-08-11 17:37:35 -04:00
Huw Duddy
467fe37109
Merge pull request #3170 from recrof/promicro-pin-tidy-up
...
[promicro] make pinmap more tidy, move the LoRa pins to variant.h
2026-08-11 18:43:20 +10:00
Rastislav Vysoky
3631de37de
removed misleading 'GPIO' from pin numbers
2026-08-11 10:37:20 +02:00
ripplebiz
c6d2dd6234
Merge pull request #3164 from weebl2000/fix-tbeam-s3-display
...
Fix display issues on T-beam Supreme S3
2026-08-11 14:39:39 +10:00
agessaman
f82950f311
feat(companion_radio): add external FEM gain preferences for RX and TX for companions
...
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
Rastislav Vysoky
a3825aa272
make promicro pinmap more tidy, move the LoRa pins to variant.h
2026-08-10 20:13:59 +02:00
Liam Cottle
ff0ef14159
Merge pull request #3166 from recrof/debug-noise-floor-flag
...
move RadioLibWrapper noise_floor level message under special debug flag
2026-08-11 03:07:31 +12:00
Rastislav Vysoky
09ef746f29
move RadioLibWrapper noise_floor level message under special debug flag
2026-08-10 16:56:56 +02:00
Wessel Nieboer
1d98c49b1b
Fix T-beam Supreme S3 display
2026-08-10 13:39:16 +02:00
Huw Duddy
5f55d855bc
Merge pull request #3158 from mepholic/bug/fix-rxgain-setting-post-agc-reset
...
Fix RX Boosted Gain setting after AGC reset is triggered
2026-08-10 17:31:38 +10:00
ripplebiz
04fda41bd5
Merge pull request #3142 from oltaco/buildfix-userbtn
...
Build fix for R1 Neo and Minewsemi repeater
2026-08-10 13:30:24 +10:00
ripplebiz
0d743ba144
Merge pull request #3146 from oltaco/lr2021-preamble-and-irq-timeout
...
LR2021: add PREAMBLE_DETECTED bit and IRQ timeout logic
2026-08-10 13:29:12 +10:00
Dan Theisen
397ea610e6
RX Boosted Gain was set back to the compiled in value rather than the current/flash value set by the user when the ACG reset is triggered. This commit fixes this.
2026-08-09 18:11:35 -07:00
Florent
b8324f4fa8
nrf52: call nRFCrypto.begin()/end() only once
2026-08-09 14:46:23 -04:00
Huw Duddy
79d2eeaa76
Merge pull request #3148 from recrof/add-missing-kiss-radio
...
add missing kiss radio roles, add kiss radio build to build.sh
2026-08-09 22:22:08 +10:00
Rastislav Vysoky
d3f9cbb922
add missing kiss radio roles, add kiss radio build to build.sh
2026-08-09 14:17:18 +02:00
Huw Duddy
66eb74f0fb
Merge pull request #3140 from entr0p1/fix/techo-lite-pins
...
Lilygo T-Echo Lite Pin Fixes
2026-08-09 22:06:21 +10:00
taco
203c44c9f5
LR2021: add PREAMBLE_DETECTED bit and IRQ timeout logic
2026-08-09 21:41:22 +10:00
taco
2d412be465
minewsemi: build fix and platformio.ini tidy up
...
fixes minewsemi repeater failing build due to user_btn missing.
2026-08-09 18:33:27 +10:00
taco
05bdabe425
R1 neo: remove stray lib_deps entry
2026-08-09 16:51:45 +10:00
taco
7634c077e5
build fix for R1 Neo repeater
...
added missing declarations for user_btn and NullDisplayDriver
2026-08-09 16:50:44 +10:00
Scott Powell
da1fc9c0e8
Merge branch 'dev'
...
# Conflicts:
# docs/payloads.md
2026-08-09 15:16:48 +10:00
Scott Powell
68dedd3e96
* version 1.17.0
2026-08-09 15:14:46 +10:00
entr0p1
430ef3b086
Lilygo T-Echo Lite Pin Fixes
...
- Aligned to Lilygo's updated schematic and pin map as per https://github.com/Xinyuan-LilyGO/T-Echo-Lite/issues/14
2026-08-09 14:09:35 +10:00
ripplebiz
02f7fb7cbc
Merge pull request #3139 from oltaco/x1-flash
...
Add QSPIFlash support for Seeed MeshTracker X1
2026-08-09 13:52:56 +10:00
Huw Duddy
484967f36d
Merge pull request #3125 from Hacuchino-hash/fix-x1-charge-status
...
Fix X1 charge status LED always showing charged
2026-08-09 12:54:29 +10:00
taco
e1fa02a677
bump CustomLFS version for GD25Q64C support
2026-08-09 11:45:35 +10:00
taco
964d87c890
add QSPIFlash support for Seeed MeshTracker X1
2026-08-09 11:41:09 +10:00
Adam Gessaman
5704db9f74
fix(station-g3): apply FEM PA level at TX start
...
PA PL1 re-targets the PA's DC-DC supply rail rather than selecting a
logic-level gain, and the serial CLI is serviced on every main-loop pass
regardless of whether a transmit is in flight. A `set radio.fem.txgain`
write could therefore move the rail mid-transmit, while the SX1262 was
still driving the PA at full input power.
Record the requested level in setPAGainEnable() and drive the pin from
setTxModeEnable(), which runs from onBeforeTransmit() ahead of
startTransmit(). The level only matters while transmitting, so deferring
costs nothing.
Document that the pref is saved immediately but applied at the next
transmit, so `get radio.fem.txgain` can lead the hardware until then.
2026-08-08 14:53:57 -07:00
Bill Plein
5ee9758b75
Allow for build-time macro to disable the bluetooth LED
...
Several variants use one or another method to disable the bluetooth LED that is grabbed by the Adafruit Bluefruit library by default. This allows for single build_flags macro to control the behavior (default behavior if not defined, not auto-controlled by Bluefruit if defined). This would open up for future cases where this could be controlled via a CLI command or by an application.
Does not change behavior if the flag is not defined.
2026-08-07 17:51:01 -05:00
Hacuchino-hash
4160dfbb87
Fix X1 charge status LED always showing charged
2026-08-07 08:08:08 -05:00
ripplebiz
3bfca7b79d
Merge pull request #3122 from Hacuchino-hash/x1-notifications
...
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-07 15:26:33 +10:00
agessaman
2eb7feffe0
fix(station-g3): expose FEM gain preferences
2026-08-06 15:29:14 -07:00
Huw Duddy
27f58e075e
Merge pull request #3121 from liamcottle/config/disable-companion-cad
...
Disable CAD on Companion Firmware until it's configurable
2026-08-06 22:40:37 +10:00
Hacuchino-hash
dc8e2d6745
Add SPA06 barometer telemetry and charge status LED for MeshTracker X1
2026-08-06 07:27:05 -05:00
Hacuchino-hash
f8ea866b1f
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-06 07:27:05 -05:00
liamcottle
3da5f1d4c5
disable cad on companion until it's configurable
2026-08-07 00:19:18 +12:00
Liam Cottle
8900202da9
Merge pull request #3120 from recrof/patch-2
...
ThinkNode M6: Remove QSPIFLASH=1 build flag to fix companion roles
2026-08-06 22:54:24 +12:00
Rastislav Vysoky
63108c2c90
ThinkNode M6: Remove QSPIFLASH=1 build flag to fix companion roles
...
M6 doesn't have flash chip available, so companion roles fail to start.
2026-08-06 12:37:21 +02:00
ripplebiz
2b662e2850
Merge pull request #3112 from Hacuchino-hash/add-meshtracker-x1
...
Add support for Seeed SenseCAP MeshTracker X1 (LR2021)
2026-08-06 16:04:18 +10:00
Hacuchino-hash
5b2613fc0a
Add support for Seeed SenseCAP MeshTracker X1 (LR2021)
2026-08-05 05:50:21 -05:00
ripplebiz
8bf182fb41
Merge pull request #3115 from oltaco/meshnology_w12
...
Add support for Meshnology W12 and LR2021 Wrapper
2026-08-05 15:04:00 +10:00
taco
cb7b158931
LR2021: auto-LDRO for side detectors
2026-08-05 14:23:32 +10:00
taco
c2b7e56cbc
LR2021: fix for hardware cad and side detectors
2026-08-05 14:23:32 +10:00
taco
5687ba3f87
LR2021 multi-SF support (side detectors)
2026-08-05 14:23:32 +10:00
taco
e2d050df9f
add Meshnology W12 support and LR2021 wrapper
2026-08-05 14:23:29 +10:00
ViezeVingertjes
4820f0916d
Merge remote-tracking branch 'upstream/dev' into fix/scoped-reply-routing
...
# Conflicts:
# examples/simple_repeater/MyMesh.cpp
2026-08-04 11:49:58 +02:00
Liam Cottle
fee753faae
Merge pull request #3107 from meshcore-dev/anon-req-fix
...
bounds check added for anon_req reply_path_len
2026-08-04 13:34:18 +12:00
fdlamotte
bb48b096ce
Merge pull request #2863 from benskigomez/fix/m6-gps-reset-pin
...
thinknode_m6: don't drive GPS REINIT pin so the L76K is detected
2026-08-03 21:16:59 -04:00
ViezeVingertjes
34156ddb11
Fix replies dropped when flood.max.unscoped is low
2026-08-03 22:57:12 +02:00
Scott Powell
c63f7d77f7
* bounds check added for anon_req reply_path_len
2026-08-04 01:00:31 +10:00
Huw Duddy
06685f6fae
Merge pull request #3076 from MDamon/fix/lr1110-rx-timeout
...
LR1110: fix startReceive() passing an IRQ bit as the RX timeout 🤖 🤖
2026-08-03 23:02:52 +10:00
Huw Duddy
02bb3bbad8
Clean up comments in startReceive method
...
Removed unnecessary comments regarding RX timeout and IRQ mask.
2026-08-03 22:57:34 +10:00
Liam Cottle
6442e73595
Merge pull request #3098 from jirogit/fix/unit-c6l-flash-mode-dio
...
fix: M5Stack Unit C6L boot failure caused by flash_mode=qio
2026-08-03 19:45:38 +12:00
ripplebiz
1b4afa95b6
Merge pull request #2824 from NickDunklee/rak-advert-hw-encryption
...
feat: use nrf52 hardware crypto where we can
2026-08-02 15:35:33 +10:00
me
77b1356b36
fix: M5Stack Unit C6L merged.bin fails to boot (flash_mode qio->dio)
...
Board manifest for esp32-c6-devkitm-1 defaults build.flash_mode to qio,
which this module's flash chip does not support -- causes a boot
crash-loop (repeated USB-Serial-JTAG reconnects) on real hardware.
Override with board_build.flash_mode = dio in the common M5Stack_Unit_C6L
section so it applies to all envs (ble/usb/repeater/room_server).
2026-08-01 22:20:20 -07:00
Mike Damon
d535134724
LR1110: fix startReceive() passing an IRQ bit as the RX timeout
...
CustomLR1110::startReceive() passed RADIOLIB_LR11X0_IRQ_PREAMBLE_DETECTED
(1<<4 = 16) as RadioLib's first argument, which is the RX *timeout*, not an
IRQ mask. At the LR11x0's 30.52us tick that armed the receiver for ~488us, so
it dropped out of RX before any packet could arrive and the node received
nothing at all -- while transmitting normally.
Symptoms on a SenseCAP T1000-E: tx_air_secs rising, rx_air_secs stuck at 0,
recv_errors 0, and the noise floor pinned at the -120 clamp because
getCurrentRSSI() never sampled a live receiver.
Pass RADIOLIB_LR11X0_RX_TIMEOUT_INF (continuous RX), which is what
LR11x0::startReceive() itself uses, keeping the PREAMBLE_DETECTED flag in the
reported IRQ flags as intended.
Introduced in 04b643b2 ("LR1110: add PREAMBLE_DETECTED to reported irq flags").
Verified on two T1000-E units: with only the repeater fixed it began receiving
(last_rssi -29, SNR 17.0) while the unfixed companion stayed deaf; fixing both
brought up the link in each direction.
2026-07-30 12:14:39 -04:00
ripplebiz
c5e44928eb
Merge pull request #2688 from Che177/feature/room-server-system-posts
...
room_server: add room.post command for server-originated posts
2026-07-30 13:08:18 +10:00
ripplebiz
837869fa93
Merge pull request #3004 from axhoff/agent/preserve-utf8-advert-names
...
Preserve UTF-8 boundaries in advert names
2026-07-30 12:59:59 +10:00
ripplebiz
17b809d62c
Merge pull request #3060 from entr0p1/fix/mesh-debug-active
...
Clean up debugs left on in platform.ini files
2026-07-30 12:35:22 +10:00
ripplebiz
ef08c7b0f3
Merge pull request #3063 from oltaco/unify-irq-timeout
...
Unify IRQ timeout logic across all applicable radio types
2026-07-29 23:52:48 +10:00
ripplebiz
4cf508121e
Merge pull request #3049 from liamcottle/feature/ethernet
...
Refactor Companion Interfaces + Add ThinkNode M7 Ethernet Support
2026-07-29 23:45:51 +10:00
taco
dc6264b870
LLCC68: add IRQ timeout logic
2026-07-29 23:34:01 +10:00
taco
2f19204283
SX1268: add IRQ timeout logic
2026-07-29 23:34:01 +10:00
taco
c490abf452
STM32WLx: add IRQ timeout logic
2026-07-29 23:33:51 +10:00
taco
7fbac66a33
LR1110: fix unnecessary IRQ clear
2026-07-29 23:18:15 +10:00
ripplebiz
12476c3684
Merge pull request #3062 from oltaco/fix-irq-clear
...
Fix unnecessary IRQ clearing
2026-07-29 22:37:30 +10:00
taco
0f543ccc34
fix unnecessary IRQ clear
2026-07-29 21:39:56 +10:00
entr0p1
52fb56395d
Clean up debugs left on in platform.ini files
2026-07-29 18:27:15 +10:00
Che177
8762862522
room_server: use standard mesh debug logging
2026-07-28 21:57:42 -07:00
Liam Cottle
fec0521099
Merge pull request #3047 from dg1tal/codex/docs-3044-group-privacy
...
Clarify hashtag privacy and group sender identity
2026-07-28 15:41:48 +12:00
Liam Cottle
31a5fe838a
Merge pull request #3048 from entr0p1/fix/startota-failure-recovery
...
nRF52840 "start ota" Failure Recovery
2026-07-28 15:36:48 +12:00
Che177
b9918e6037
room_server: add room.post system posts
2026-07-27 19:50:13 -07:00
entr0p1
d4ee0fc4eb
nRF52840 "start ota" Failure Recovery
...
If Bluefruit.begin fails, BLE OTA mode won't actually start and the board might require a reboot to reattempt.
Fixes:
- Bluefruit.begin returns false in NRF52Board.startOTAUpdate if OTA mode fails to start. User is notified of the fault through existing error message in CommonCLI and can reattempt "start ota" command.
2026-07-28 10:14:59 +10:00
DG1TAL
ae3517f480
Clarify hashtag privacy and group sender identity
2026-07-27 20:07:08 +02:00
liamcottle
b1218c1dbe
fix bluetooth toggle on ui tiny
2026-07-28 03:50:08 +12:00
liamcottle
6e815d755f
usb companion firmwares now require build flag to include usb interface
2026-07-28 03:45:02 +12:00
liamcottle
4ba459402c
remove old rak ethernet interface
2026-07-28 03:18:54 +12:00
liamcottle
bd83d290da
refactor rak13800 to new ethernet interface class
2026-07-28 03:18:54 +12:00
liamcottle
6a785759d3
refactored companion interfaces to allow for multiple active connection modes
2026-07-28 03:18:54 +12:00
liamcottle
a20eb51124
rename class
2026-07-28 03:18:54 +12:00
liamcottle
1c7a4b307f
initial ch390 ethernet support for thinknode m7 companion
2026-07-28 03:18:54 +12:00
ripplebiz
86cf57b4e7
Merge pull request #2982 from meshcore-dev/config-serializer
...
Config serializer
2026-07-27 17:58:03 +10:00
ripplebiz
f2e46925e6
Merge pull request #3034 from meshcore-dev/ui-color-refactor
...
UI color refactor
2026-07-27 17:45:12 +10:00
Liam Cottle
4d9d44065a
Merge pull request #3040 from blowfishpro/docs/FixPayloadDocsFormatting
...
Increase header levels on "Payloads" documentation page to fix table of contents
2026-07-27 14:13:09 +12:00
Talia
9d2343e06f
docs: increase header levels on payloads page to fix table of contents
...
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents
this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
2026-07-26 15:55:27 -07:00
ripplebiz
6aaea1ecbe
Merge pull request #3036 from oltaco/add-preamble-irq-flag
...
Fix missing PREAMBLE_DETECTED IRQ flag for all radio wrappers
2026-07-25 01:40:19 +10:00
taco
fd3639dd4e
SX1268: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:39 +10:00
taco
a04833f029
STM32WLx: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:39 +10:00
taco
15edc9e9e9
LLCC68: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:39 +10:00
taco
04b643b21a
LR1110: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:46:36 +10:00
taco
11a0236c2c
SX1262: add PREAMBLE_DETECTED to reported irq flags
2026-07-25 00:38:44 +10:00
Scott Powell
1d4e21c89f
* T114 display fix
2026-07-24 18:35:56 +10:00
Scott Powell
b6ff4ad43f
* fixed for mono ST7789 display driver
2026-07-24 15:31:22 +10:00
Scott Powell
c194f52916
* monochrome displays now do _not_ invert titlebar
2026-07-24 15:14:56 +10:00
Scott Powell
cfb7d156e9
Merge branch 'dev' into config-serializer
...
# Conflicts:
# test/mocks/Arduino.h
# test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Liam Cottle
c5c78d37bd
Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276
...
Increase LilyGo T-Beam SX1276 channels from 8 to 40
2026-07-24 15:34:19 +12:00
liamcottle
77244ce4a6
increase tbeam sx1276 max group channels from 8 to 40
2026-07-24 15:31:01 +12:00
Liam Cottle
b057f40b53
Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
...
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Nick Dunklee
0b7f83894f
Global nrf52 hardware crypto, removed from individual configs
...
Select nodes had this flag enabled, testing by the community
and hardware specs indicate this can be enabled global for all
node types using this chipset.
Any nodes down the line that may be quirky can be individually
disabled with `-U USE_CC310_HW_CRYPTO`.
2026-07-23 14:02:34 -06:00
Liam Cottle
69c0b954c4
Merge pull request #3023 from agessaman/fix/rx-boosted-gain
...
fix(room_server): support RX boosted gain
2026-07-23 03:22:41 +12:00
Scott Powell
9f6ab20bbb
* build fixes for old ESP32 boards
2026-07-22 19:52:23 +10:00
Scott Powell
37ff90ab95
* build fixes for NullDisplayDriver
2026-07-22 18:55:59 +10:00
Scott Powell
365332205e
* refactor of Color mapping in UITasks / DisplayDrivers
...
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
agessaman
20f7421f72
fix(room_server): support RX boosted gain
...
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:
- boosted gain was never applied to the radio at boot, so a room server
ran in power-saving RX mode while an identical repeater ran boosted -
a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
already written the value to prefs and saved them, so a stale setting
survived reboot and was never applied
Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.
Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
2026-07-21 12:23:20 -07:00
Scott Powell
372281ee8f
* optimised: value-init not needed
2026-07-21 19:22:09 +10:00
ripplebiz
2efeea7666
Merge pull request #3005 from axhoff/agent/fix-ble-reconnect
...
Fix bonded BLE reconnects on ESP32
2026-07-21 19:17:34 +10:00
ripplebiz
7ce6536fac
Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue
...
Synchronize the ESP32 BLE receive queue
2026-07-21 18:10:37 +10:00
ripplebiz
a62d05970b
Merge pull request #3006 from axhoff/agent/fix-heltec-v4-usb-companion
...
Enable hardware USB serial on Heltec V4
2026-07-21 17:54:22 +10:00
Liam Cottle
06d660bf86
Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c
...
Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)
2026-07-21 19:17:32 +12:00
Alexander Hoffer
299e921549
refactor: use FreeRTOS BLE receive queue
2026-07-21 07:17:01 +01:00
=UltimateCodeWarrior
1dd58e3b49
Move Supreme OLED address to variant config
...
Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.
2026-07-20 19:24:38 -07:00
fdlamotte
79e06eaf99
Merge pull request #2887 from spinda/thinknode-m3-dev
...
Fix GPS and LEDs on ThinkNode M3
2026-07-20 17:42:30 -04:00
NickDunklee
61356bff53
Merge branch 'dev' into rak-advert-hw-encryption
2026-07-20 13:29:08 -06:00
fdlamotte
81a24084de
Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals
...
NRF52Board - ShutdownPeripherals() housekeeping
2026-07-20 11:53:56 -04:00
Alexander Hoffer
c5f09f2490
fix: preserve UTF-8 advert names
2026-07-20 15:47:03 +01:00
Alexander Hoffer
ef45704c53
fix: preserve bonded BLE reconnects
2026-07-20 15:47:03 +01:00
Alexander Hoffer
c7531c4502
fix: enable Heltec V4 USB serial
2026-07-20 15:47:03 +01:00
Alexander Hoffer
65e14d5bd9
fix: synchronize BLE receive queue
2026-07-20 15:47:03 +01:00
Liam Cottle
0f98c46556
Merge pull request #2990 from entr0p1/fix/xiao-nrf52-userbtn
...
Fix Xiao nRF52840 repeater compile failure
2026-07-21 02:09:33 +12:00
entr0p1
9812e567e6
nRF52840 Power Management Stage 1 (Boot Lock) - v2.3 preparation work
...
This commit lays some of the ground work for the upcoming power management fix that allows users to configure the boot lock behaviour.
It is *not* the full fix yet. The goal is to break up the larger commit into smaller chunks so it is easier to review and softer to merge.
Improvements:
- MainBoard: Add bool to check if power management has been initialised (later to be consumed by CommonCLI to validate we can safely configure the settings)
- MainBoard: Add bool to validate LPCOMP is supported on the board (gates LPCOMP config so it doesnt wedge on an unsupported board)
- NRF52Board: Rename initPowerMgr() -> pwrmgtInit() to align with the "pwrmgt" prefix being used by any power management related functions in the upcoming new version
- NRF52Board: Add a shutdown reason for "None" so the `get pwrmgt.bootreason` command doesnt erroneously return "Unknown"
- NRF52Board: Add gate in configureVoltageWake to not arm LPCOMP when power management isn't initialised or the board doesn't support LPCOMP (i.e. we havent defined the AIN pin)
- NRF52Board: Reference the LPCOMP AIN pin directly instead of from the per-board definitions to align to the upcoming deprecation of the per-board static configs
- NRF52Board: Drop LPCOMP hysteresis as it broadens the wake voltage too much and makes the board less likely to self-recover
- NRF52Board: Separate LPCOMP and VBUS wake arm into their own functions
2026-07-20 23:44:48 +10:00
entr0p1
5920b28f33
Fix Xiao nRF52840 repeater compile failure
...
Compile fails due to user_btn not declared in board target.
Fixes:
- Add MomentaryButton declaration for user_btn in variants/xiao_nrf52/target.cpp
- Add momentary button helper include in variants/xiao_nrf52/target.h
- Add extern linkage for MomentaryButton -> user_btn in variants/xiao_nrf52/target.h
2026-07-20 22:43:25 +10:00
Szetya
8afa7242c2
Update variant.h
...
Correct of GPS RX/TX Pins.
2026-07-20 14:11:06 +02:00
Liam Cottle
2a38f3f364
Merge pull request #3000 from oltaco/rx-irq-timeout
...
fix: clear the correct IRQ flag for timeout on preamble detected on SX1262
2026-07-20 23:32:12 +12:00
taco
3bcb2c7477
fix: clear the correct IRQ flag for timeout on preamble detected
2026-07-20 21:05:12 +10:00
Liam Cottle
62de21a5e4
Merge pull request #2998 from oltaco/heltec-t1-bodmer
...
Fix: Heltec t1: add missing bodmer TFT_eSPI library
2026-07-20 22:39:17 +12:00
taco
172b0d44b0
fix: heltec t1: add missing bodmer TFT_eSPI library
2026-07-20 20:28:38 +10:00
Liam Cottle
b307f68a88
Merge pull request #2994 from oltaco/rx-irq-timeout
...
Add setter methods for preambleMillis and maxPayloadMillis on SX1262 and LR1110
2026-07-20 22:07:36 +12:00
taco
98448b4463
LR1110: add setter methods for preambleMillis and payloadMillis
2026-07-20 19:52:57 +10:00
taco
6ff42198bd
SX1262: add setter methods for preambleMillis and payloadMillis
2026-07-20 19:52:57 +10:00
Liam Cottle
41e85c5851
Merge pull request #2989 from rgregg/fix-nrf52-ethernet-build
...
Fix nRF52 builds broken by unconditional RAK Ethernet include
2026-07-20 20:58:26 +12:00
liamcottle
22b2de711c
Merge remote-tracking branch 'official/main' into dev
2026-07-20 20:42:09 +12:00
ripplebiz
5bc41e20ad
Merge pull request #2977 from oltaco/rx-irq-timeout
...
Add IRQ timeout logic for SX1262 and LR1121
2026-07-20 14:14:02 +10:00
Ryan Gregg
67e2e16770
Fix nRF52 builds: guard SerialEthernetInterface with ETHERNET_ENABLED
...
SerialEthernetInterface.cpp is compiled for every nRF52 target because
PlatformIO builds all .cpp files under src/. It includes
SerialEthernetInterface.h, which unconditionally pulls in
<RAK13800_W5100S.h> -- a library only present in the RAK4631 Ethernet
env's lib_deps. As a result any other nRF52 board (e.g. Heltec T114)
fails to build with 'RAK13800_W5100S.h: No such file or directory'.
Wrap the contents of both files in '#ifdef ETHERNET_ENABLED' so they
compile to empty translation units on non-Ethernet builds. RAK4631
Ethernet envs define ETHERNET_ENABLED and are unaffected.
Fixes #2985
2026-07-19 10:17:08 -07:00
entr0p1
69241fc88c
NRF52Board - ShutdownPeripherals() housekeeping
...
Improvements:
- Add condition to only turn off display if on (avoids wedging the shutdown on some displays)
- Reset LoRa radio before calling radio_driver.powerOff() to ensure it is in a known good state (and will accept the command)
- Ensure SPI is started so LoRa radio commands can be sent (some shutdowns can happen before this)
- Add gate for P_LORA_NSS pin defined before writing to the pin
2026-07-19 23:59:12 +10:00
taco
a81b54bbba
fix: setMaxPacketMillis() should return void
2026-07-19 22:06:36 +10:00
Liam Cottle
4fd6f50a16
Merge pull request #1865 from MeshEnvy/fix/python-json-parse-error
...
fix: JSON parsing regression in build.sh
2026-07-19 22:58:21 +12:00
ViezeVingertjes and Adam Gessaman
5614deb63f
fix: guard HWCDC serial config behind ARDUINO_USB_MODE
...
setTxTimeoutMs() and setTxBufferSize() are HWCDC-only APIs; calling
them on HardwareSerial (UART-bridge boards like T-Beam) fails to compile.
Co-Authored-By: Adam Gessaman <adam@gessaman.com >
2026-07-18 22:43:55 +02:00
ViezeVingertjes
779cd08e54
fix: run KISS modem unit tests in CI via native_kiss_modem env
...
The new test_kiss_modem suite needs KissModem headers and sources that
only native_kiss_modem provides. Scope native to test_utils and run both
envs in the unit test workflow.
2026-07-18 22:43:55 +02:00
ViezeVingertjes
2679fa8ebc
fix: prevent ESP32 KISS modem stalls under USB backpressure
...
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
Scott Powell
c34c368e3f
* RP2040 build fixes
...
* new prefs file now "/prefs.json"
2026-07-18 20:12:21 +10:00
Scott Powell
10434a1cfd
* added prefs initialisers to match original zeroed state
2026-07-18 19:22:53 +10:00
ripplebiz
c289e500d5
Merge pull request #2966 from Quency-D/heltec-rc32
...
Add Heltec rc32 board
2026-07-17 23:23:29 +10:00
fdlamotte
771e6e90d4
Merge pull request #2976 from fdlamotte/UITask_poweroff_radio_display
...
UI task: poweroff of radio and display moved to board
2026-07-17 08:35:06 -04:00
Florent
59d845c44d
uitask: screen and radio poweroff moved to board
2026-07-17 08:29:31 -04:00
fdlamotte
db32e3519d
Merge pull request #2975 from fdlamotte/nrf52_boards--use-shutdownPeripherals-on-TInpulse-and-TEchoBoard
...
nrf52_variants: override shutdownPeripherals instead of powerOff for …
2026-07-17 08:12:35 -04:00
taco
f3f93b9e00
add IRQ timeout logic for LR11X0
2026-07-17 21:45:31 +10:00
Florent
dccbdd4a02
nrf52_variants: override shutdownPeripherals instead of powerOff for TechoLite, TInpulse and TechoBoard (protect the gate)
2026-07-17 07:36:39 -04:00
taco
6f752bc80c
add IRQ timeout logic for SX1262
2026-07-17 21:33:57 +10:00
Scott Powell
dae73ac971
* loadSerial(), support for \n and \r
2026-07-17 21:23:40 +10:00
fdlamotte
3489309e08
Merge pull request #2883 from fdlamotte/repeater_btn
...
repeater: poweroff on long press
2026-07-17 07:18:44 -04:00
taco
2e588fef22
add calcMaxPacketMillis
2026-07-17 21:15:09 +10:00
Scott Powell
bfb5310c6b
* added unit tests for ConfigSerializer
2026-07-17 20:55:30 +10:00
fdlamotte
1b929311c4
Merge branch 'dev' into repeater_btn
2026-07-17 06:55:19 -04:00
fdlamotte
1ca67310df
Merge pull request #2906 from fdlamotte/shutdown_peripherals
...
Proposal: Introduce shutdownPeripherals in NRF52Board to prepare for shutdown
2026-07-17 06:53:00 -04:00
Quency-D
28d3f22b07
Move the rotation input to target.cpp
2026-07-17 15:50:25 +08:00
Quency-D
89856d934a
Avoid waking display from rotary input
2026-07-17 15:35:07 +08:00
Scott Powell
f665188266
* new NodePrefs for companion
2026-07-17 16:05:10 +10:00
ripplebiz
23c9e0cc8d
Merge pull request #2560 from Quency-D/heltec-v4-r8
...
Add heltec-v4-r8 board
2026-07-17 13:54:45 +10:00
Nick Dunklee
06ec571ec1
Minor ifdef rename as it now covers more than just Ed25519
...
for hardware encryption. Now `USE_CC310_HW_CRYPTO`
2026-07-16 21:44:35 -06:00
Quency-D
b18356caca
Optimize battery voltage reading
2026-07-16 17:45:00 +08:00
Scott Powell
0b77e07d30
Merge branch 'dev' into config-serializer
2026-07-16 17:22:28 +10:00
Quency-D
bf56f54427
Delete duplicate pin definitions
2026-07-16 15:14:17 +08:00
Quency-D
7a1fdb0ea2
Enable patch reception
2026-07-16 11:37:12 +08:00
Quency-D
6a651edbfe
Add a rotary encoder
2026-07-15 17:45:24 +08:00
ripplebiz
f1b84898a6
Merge pull request #1983 from rgregg/rak-ethernet
...
Support for RAK ethernet module
2026-07-15 18:53:38 +10:00
Liam Cottle
2ccf21337d
Merge pull request #2897 from yarda/companion-add-mcu-temp-sensor
...
Added MCU temp sensor to the companion
2026-07-15 20:11:24 +12:00
Quency-D
87c0849a07
Merge pull request #17 from meshcore-dev/dev
...
merge Dev
2026-07-15 14:49:40 +08:00
Liam Cottle
fb5e3ec854
Merge pull request #2954 from liamcottle/board/thinknode-m7-neighbours
...
Increase ThinkNode M7 MAX_NEIGHBORS to 50
2026-07-15 16:06:58 +12:00
liamcottle
94d17a9f10
increase thinknode m7 max neighbours to 50
2026-07-15 16:05:37 +12:00
Scott Powell
61de8cfc1a
* ST7735 color/offset fix for Heltec Tracker V1
2026-07-15 14:00:10 +10:00
Scott Powell
06eec9e512
* misc fixes
2026-07-15 13:21:44 +10:00
Jaroslav Škarvada
75235de0fd
Added MCU temp sensor to the companion
...
Fixes #2896
2026-07-14 17:43:33 +02:00
Scott Powell
a4e7cdf4f3
* first draft of new ConfigSerializer. (simple embedded JSON prefs)
2026-07-15 01:23:57 +10:00
Liam Cottle
185fb9351b
Merge pull request #2952 from Quency-D/fix-ex-watchdog
...
fix repeater watchdog
2026-07-15 02:54:58 +12:00
Nick Dunklee
5efbc3d29c
feat: add more crypto
...
After soaking for a bit on the adverts without issue on multiple nodes,
I added more hardware crypto.
Supported nodes is unchanged in this PR addition, but if others can verify,
they can easily be added.
Some info on the CC310: https://docs.nordicsemi.com/r/bundle/ps_nrf9151/page/cryptocell.html
**Added:**
- AES-128 packet encryption/decryption now use hardware crypto
- HMAC-SHA-256 authentication now uses hardware crypto
- ACK hash computation and channel ID derivation now use hardware crypto
- RNG (random number generator) now uses hardware crypto rather than
radio noise + weak software RNG (which can have issues if there's
no surrounding radio noise.) NIST SP 800-90B certified.
- Runs hardware self-tests on startup
- Runs continuous health tests during operation
- Uses thermal noise/shot noise for randomness
**Unchanged:**
- calcSharedSecret remains software - it would be a split hw/sw solution
and added complexity for likely not a lot of gains. This only happens
when establishing a new contact, so not too frequent to be worth it.
- ed25519_create_keypair remains software. This is only called when a
node is first initialized. It does use the hardware RNG change, however,
so better randomization.
Tested on (so far):
- Heltec t096
Build test on:
- Heltec t096 companion ble
- t1000e companion ble
- RAK 4631 repeater
- RAK 3401 companion BLE
- Heltec v3 companion wifi
2026-07-14 08:35:27 -06:00
Nick Dunklee
9bb43f82aa
Merge remote-tracking branch 'upstream/dev' into rak-advert-hw-encryption
2026-07-14 08:22:12 -06:00
Quency-D
72afb0256f
Remove the watchdog feeding operation from each iteration of the loop to reduce power consumption.
2026-07-14 17:23:13 +08:00
Ryan Gregg
3ba5de20f6
Merge remote-tracking branch 'upstream/dev' into rak-ethernet
...
# Conflicts:
# examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Huw Duddy
c7573330ff
Merge pull request #2951 from meshcore-dev/fast-st7735-display
...
Fast ST7735 Display Driver
2026-07-14 16:01:14 +10:00
Scott Powell
fedef6b5f5
* HSPI fix
2026-07-14 15:46:36 +10:00
ripplebiz
dac6eed388
Merge pull request #2898 from entr0p1/fix/lilygo-techo-lite-sx1262-ldo
...
Lilygo T-Echo Lite - Change SX1262 from DC-DC to LDO regulator
2026-07-14 14:53:44 +10:00
ripplebiz
165906a341
Merge pull request #2899 from entr0p1/fix/lilygo-techo-lite-nrf-dcdc
...
Lilygo T-Echo Lite - nRF52840 DC-DC
2026-07-14 14:52:56 +10:00
ripplebiz
cb2147690e
Merge pull request #2905 from entr0p1/fix/heltec-t114-nrf-dcdc
...
Heltec T114 - nRF52840 DC-DC Regulator
2026-07-14 14:52:10 +10:00
ripplebiz
44dcdceada
Merge pull request #2946 from hpux735/stream-allocation
...
Add StreamSensor allocation for GroupData
2026-07-14 14:47:57 +10:00
Scott Powell
e46734aa6f
* trying to get Heltec Tracker and Tracker V2 working
2026-07-13 23:27:50 +10:00
Will Dillon
4397242114
Add StreamSensor allocation for GroupData
...
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Let me know when and how to demonstrate.
2026-07-13 05:54:31 -07:00
ripplebiz
a187f63fc5
Merge pull request #2943 from meshcore-dev/revert-2915-main
...
Revert "Add StreamSensor allocation for GroupData"
2026-07-13 19:31:05 +10:00
ripplebiz
95f3869475
Revert "Add StreamSensor allocation for GroupData"
2026-07-13 19:30:11 +10:00
ripplebiz
668d5a554a
Merge pull request #2915 from hpux735/main
...
Add StreamSensor allocation for GroupData
2026-07-13 18:42:54 +10:00
ripplebiz
16600797f7
Merge pull request #2917 from jirogit/fix/regionmap-load-eof-handling
...
fix(RegionMap): load() returns actual read success instead of hardcoded true
2026-07-13 18:28:26 +10:00
ripplebiz
f599f52c2a
Merge pull request #2942 from liamcottle/board/thinknode-m9
...
Add support for Elecrow ThinkNode M9
2026-07-13 17:10:54 +10:00
liamcottle
4d3131deed
initial support for thinknode m9
2026-07-13 19:07:09 +12:00
ripplebiz
f13cccb3fa
Merge pull request #2937 from benskigomez/fix/gps-timesync-millis-overflow
...
sensors: fix millis() rollover that stalls GPS time-sync on long-uptime nodes
2026-07-13 17:06:09 +10:00
Liam Cottle
e59f529ee9
Merge pull request #2839 from liamcottle/board/thinknode-m7
...
Add support for Elecrow ThinkNode M7
2026-07-13 15:06:17 +12:00
Liam Cottle
bf3d4cc46a
Merge pull request #2940 from liamcottle/upgrade/radiolib
...
Update RadioLib to v7.7.1-6d893483
2026-07-13 15:03:29 +12:00
Liam Cottle
4322c3800a
Merge pull request #2936 from beala/beala/MeshTowerV2_feed_watchdog_2
...
Feed external hardware watchdog on Heltec Tower V2 (aka MeshTower V2) Implementation 2
2026-07-13 14:49:04 +12:00
liamcottle
aecbcac273
update radiolib to v7.7.1-6d893483
2026-07-13 14:39:54 +12:00
Liam Cottle
4db4fcf3f3
Merge pull request #2935 from benskigomez/fix/m6-repeater-debug-flags
...
ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
2026-07-13 12:55:13 +12:00
Liam Cottle
e11ccdb84e
Merge pull request #2938 from benskigomez/fix/room-server-default-password
...
ThinkNode M6/M1 room_server: set ROOM_PASSWORD default
2026-07-13 12:54:16 +12:00
Jody Bentley
12c1b54859
ThinkNode M6/M1 room_server: set ROOM_PASSWORD default
...
Without ROOM_PASSWORD the guest password defaults to empty, and a client
sending a blank password is granted read+write access (can post). Every
other board's room_server env sets ROOM_PASSWORD; the ThinkNode M6 and M1
were the only two shipping an open room. Default them to "hello" to match
the rest of the tree; operators can still change it at runtime with
'set guest.password'.
2026-07-12 18:32:09 -04:00
Jody Bentley
a9334b1b82
sensors: fix millis() rollover stall in GPS time-sync + minor cleanups
...
next_check and next_gps_update stored a future millis() value in a signed
long and compared with a naive '>'. After the ~24.8-day millis() sign flip
the deadline sits above the wrapped millis(), so the block never runs again
and GPS->RTC time-sync (and the location cache refresh) stall permanently
until reboot. Switch to unsigned deadlines with the wrap-safe signed-
difference compare '(long)(millis() - deadline) > 0', matching the idiom in
Dispatcher::millisHasNowPassed.
Also: reorder the MicroNMEALocationProvider ctor init-list to declaration
order (silences -Wreorder) and drop the always-true 'if (_claims > 0)' guard
in claim() (claim() always runs after _claims++, so it is >= 1).
2026-07-12 18:30:40 -04:00
Alex Beal
dc17bf149c
Add an instance of ExternalWatchdogManager to Tower V2
2026-07-12 16:17:23 -06:00
Jody Bentley
484f253abb
ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
...
The M6 is the only board whose simple_repeater env ships with MESH_DEBUG=1
and GPS_NMEA_DEBUG=1 enabled. MESH_DEBUG=1 adds a 5-second boot delay
(examples/simple_repeater/main.cpp) plus verbose per-packet serial prints on
the hot RX/TX path; GPS_NMEA_DEBUG=1 echoes every GPS UART character to the
serial console (MicroNMEALocationProvider.h). Every sibling repeater env
(M1, M3, t1000-e, RAK, Heltec) ships these off, and the M6 room_server env
in this same file already has them commented. Comment them out to match.
2026-07-12 17:54:14 -04:00
Alex Beal
653bb4f892
Update #defines
...
External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.
2026-07-12 15:50:43 -06:00
Alex Beal
54ccedefdb
Merge branch 'dev' into pr-1446
2026-07-12 15:44:28 -06:00
jirogit
a9112fefe4
fix(RegionMap): distinguish clean EOF from partial read in load()
...
Previously load() returned true unconditionally on file-open success,
masking truncated or corrupt /regions2 files. Additionally, the first
field of each entry record (r->id) used the same success-chaining
pattern as subsequent fields, so a clean EOF at a record boundary set
success=false and would have been indistinguishable from real
corruption once the return value was fixed.
The r->id read is now split out: n==0 is a clean EOF (break, success
retains its prior value from the header read), n!=sizeof(r->id) is a
partial read or corruption (break, success=false). load() now returns
success instead of an unconditional true, so its return value reflects
the actual parse outcome.
Companion fix to #2372 , which fixed the same return-true hardcoding
in save(). (#1891 originally reported this on load() but was closed
when #2372 landed — that PR only touched save(); this addresses the
load() side.)
2026-07-09 19:59:05 -07:00
Liam Cottle
bd3f6be514
Merge pull request #2913 from weebl2000/fix-typos
...
fix misspelled RF switch pin macros in SX1268/LLCC68/SX1276 radio wrappers
2026-07-10 12:26:28 +12:00
Will Dillon
b457f22a0a
Update number_allocations.md
...
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
2026-07-09 11:43:20 -07:00
Wessel Nieboer
7966551627
fix misspelled RF switch pin macros in SX1268/LLCC68/SX1276 radio wrappers
2026-07-09 16:31:28 +02:00
Quency-D
0c0965ea3a
Add heltec rc32 board
2026-07-08 16:20:12 +08:00
Quency-D
3705a7fdd2
Merge pull request #16 from meshcore-dev/dev
...
merge Dev
2026-07-08 15:15:19 +08:00
Florent
d19bc6fa77
introduce shutdownPeripherals in NRF52Board to prepare for shutdown
2026-07-07 10:20:03 -04:00
entr0p1
d87bf40fde
Heltec T114 - nRF52840 DC-DC Regulator
...
- Enable DC-DC regulator on nRF52840 for Heltec T114 board (idle current reduced from ~12mA to ~9mA)
2026-07-07 17:12:59 +10:00
Scott Powell
e0eb1c9124
* timing fixes (courtesy of Taco)
2026-07-07 13:54:14 +10:00
Liam Cottle
7b56667054
Merge pull request #2903 from liamcottle/ci/build-matrix
...
Refactor builds via GitHub Actions to be super fast
2026-07-07 14:31:28 +12:00
liamcottle
fd5d0453aa
implement matrix builds for faster firmware releases
2026-07-07 13:23:18 +12:00
Florent
3ea483560b
fix tenstar c3 repeater build
2026-07-06 12:04:42 -04:00
Florent
e4738d125e
restore display and radio poweroff in ui
2026-07-06 08:46:57 -04:00
Florent
aea3ba3fdb
repeater: poweroff on long press
2026-07-06 08:40:56 -04:00
fdlamotte
57288d3c0b
Merge pull request #2895 from IoTThinks/MCdev-Fixed-poweroff-to-uA-202607
...
Fixed hibernate / poweroff for BLE companions and repeaters to stay at uA
2026-07-06 08:02:23 -04:00
entr0p1
f3f2db834c
Lilygo T-Echo Lite
...
- Enable nRF52840 DC-DC - board idle usage reduced from ~12mA to ~7mA
2026-07-06 15:21:09 +10:00
Scott Powell
57e5a1229c
* super fast ST7735 display driver
2026-07-06 15:09:18 +10:00
entr0p1
ce9ca615ee
Lilygo T-Echo Lite
...
- Change SX1262 to use LDO instead of DC-DC (DCC pin on SX1262 not wired in, according to schematic)
2026-07-06 14:52:18 +10:00
Kevin Le
446e6b7d41
Fixed hibernate/powerOff for ESP32 boards to stay at uA
2026-07-05 23:47:27 +07:00
Kevin Le
79967b6087
Added missing driver/rtc_io.h
2026-07-05 23:33:56 +07:00
Kevin Le
18c1347b78
Cleanup Poweroff for NRF52 boards
2026-07-05 22:10:47 +07:00
Kevin Le
f4cd0d24f5
board->powerOff() is sufficient to power off radio, display, GPS and components
2026-07-05 21:22:13 +07:00
Kevin Le
424b0b2b1e
Put powerOff to NRF52Board
2026-07-05 21:20:39 +07:00
Kevin Le
5cf05c92cd
Put powerOff and enterDeepSleep to ESP32Board
2026-07-05 21:20:13 +07:00
liamcottle
15e509f074
update qr code docs
2026-07-06 02:04:56 +12:00
liamcottle
f1527a68e7
stop tracking vscode extensions.json
2026-07-05 12:23:22 +12:00
Quency-D
1a1239844c
Merge branch 'dev' into solar-watchdog
2026-07-04 16:47:37 +08:00
ripplebiz
08293fca12
Merge pull request #2867 from entr0p1/feature/sx1262-ldo-support
...
SX1262 LDO Support
2026-07-04 12:35:03 +10:00
Naomi Smith
2221f20525
Fix GPS and LEDs on ThinkNode M3
...
GPS support was implemented incorrectly for the ThinkNode M3. The reset
pin was being driven when it should be left floating for this unit. The
enable pin also wasn't being picked up by `MicroNMEALocationProvider`
because of a mismatch in constant naming conventions. I did a general
cleanup of the GPS and ThinkNode M3 bring-up code so that constant names
line up and "*_ACTIVE" constants are used consistently vs hardcoding
`HIGH`/`LOW`. After making these changes, serial data immediately starts
streaming in from the NMEA on boot and GPS detection just works.
LED handling was also not quite right for the ThinkNode M3. The LoRa TX
LED was being driven high to turn it on when it should actually be
driven low. I changed the code to use the `LED_STATE_ON` constant and
also added a little code to the shutdown path to properly make sure that
all LEDs are turned off.
Tested and confirmed working on real hardware.
Resolves both #1864 and #2879 .
2026-07-03 12:07:19 -07:00
Liam Cottle
5ff5a3d954
Merge pull request #2372 from jirogit/fix/region-save-return-value
...
fix(RegionMap): save() returns actual write success instead of hardcoded true
2026-07-03 12:40:22 +12:00
me
b6c768aa98
fix(techo-lite): remove unused EXTERNAL_FLASH_DEVICES definition entirely
...
Per review feedback from @liamcottle and @entr0p1, EXTERNAL_FLASH_DEVICES
is not used by MeshCore firmware — CustomLFS determines the flash chip
via JEDEC ID at runtime instead. Removing the definition entirely rather
than keeping the (now-confirmed-unnecessary) correct value.
Also removes EXTERNAL_FLASH_USE_QSPI, which was paired with the same
define.
2026-07-02 08:43:06 -07:00
me
86d33ec100
fix(techo-lite): remove duplicate EXTERNAL_FLASH_DEVICES definition
...
variant.h defines EXTERNAL_FLASH_DEVICES twice:
- First (correct): ZD25WQ32CEIGR (32Mbit = 4MB, matches actual hardware)
- Second (incorrect): MX25R1635F (16Mbit = 2MB, T-Echo non-Lite chip)
Due to C preprocessor behavior, the second definition silently overrides
the first, causing firmware to initialize the wrong flash chip. This can
result in LittleFS operating incorrectly on T-Echo Lite hardware.
Remove the erroneous second definition.
Also fix missing newline at end of file.
2026-07-02 08:28:01 -07:00
ripplebiz
62a832eef9
Merge pull request #2874 from neilalexander/neil/replyregion
...
Fix `recv_pkt_region` incorrect usage
2026-07-02 22:20:30 +10:00
Neil Alexander
ea95fa0ad6
Fix recv_pkt_region incorrect usage
...
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.
`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
2026-07-02 09:28:41 +01:00
ripplebiz
cb5b0dbf1b
Merge pull request #2880 from ckoehler/push-sonzsorqmwqz
...
refactor: split MeshTables::hasSeen into pure query + markSeen
2026-07-02 13:58:48 +10:00
Christoph Koehler
f6843b10a6
refactor: split MeshTables::hasSeen into pure query + markSeen
...
hasSeen() was simultaneously a predicate and a mutator — it inserted the
packet hash on every miss, making five call sites that only wanted to mark
a packet as sent call it with the return value discarded.
Split into:
- wasSeen() — pure predicate, no side effects
- markSeen() — explicit insert
All query sites now call markSeen() immediately after wasSeen() returns
false, preserving identical runtime behaviour. The five mark-only send
sites (sendFlood, sendDirect, sendZeroHop x2) now call markSeen directly.
Also fixes three bridge sites (BridgeBase, ESPNowBridge, RS232Bridge)
that had the same query+implicit-insert pattern.
Tests: add test/test_mesh_tables/ covering wasSeen purity, markSeen,
dup stats, and clear. Update SHA256 mock to produce deterministic output
(previously finalize() was a no-op). Add Packet.cpp to native build filter.
2026-07-01 21:51:38 -06:00
Liam Cottle
761b40df5e
Merge pull request #2873 from ckoehler/fix/nix-devshell
...
build: add gcc, gtest to nix shell, fix native test framework
2026-07-02 11:32:21 +12:00
Christoph Koehler
caece08f8d
build: add gcc, gtest to nix shell, fix native test framework
2026-07-01 08:19:27 -06:00
entr0p1
5ed80856c4
SX1262 LDO Support
...
- Added build flag "SX126X_USE_REGULATOR_LDO" (set to 1 to enable) to use LDO for the SX1262 radio instead of DC-DC when the DCDC pin isn't wired up (e.g. t-echo lite)
- Added additional debug mode diagnostic messages during SX1262 init to better highlight faults
2026-06-30 16:55:16 +10:00
Jody Bentley
d273d8181b
thinknode_m6: don't drive GPS REINIT pin (fixes GPS never detected)
...
The M6's L76K GPS streams NMEA at 9600 baud on its own, but the firmware
reported no GPS. Root cause: pin 29 (PIN_GPS_RESET / the module's REINIT
line) was driven HIGH, which holds the L76K silent so it never emits any
sentences and detection fails.
variant.cpp drove pin 29 HIGH at boot, and because PIN_GPS_RESET was
defined, MicroNMEALocationProvider also drove it HIGH in begin(). Bench
testing on a sealed M6 (passive NMEA capture, no logic analyzer) confirmed:
pin 29 driven HIGH = 0 bytes; pin 29 floating = full NMEA stream.
Define GPS_RESET (-1) so the location provider never touches pin 29, and
stop driving it in initVariant. This matches the Meshtastic M6 variant,
which leaves the same pin as a floating input.
2026-06-29 14:49:11 -04:00
Liam Cottle
ff3ed838cf
Merge pull request #2853 from HDDen/dev
...
Add Data-Type to number_allocations.md
2026-06-29 21:49:19 +12:00
HDDen
de1ec0dbd3
Update number_allocations.md
2026-06-29 12:41:44 +03:00
HDDen
3f419b9184
Update number_allocations.md
...
Added Data-Type range for MeshCore Images codec (range is for small reserve to future versions)
2026-06-28 00:32:22 +03:00
Scott Powell
412cfe4a96
* ACK packets being 'clipped' (in Dispatcher send). Needed to extend max_airtime timeout calc for short packets
2026-06-27 21:06:01 +10:00
Liam Cottle
a2ae24e51f
Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605
...
Added flash_mode=dio to avoid boot loop when flashing using merge.bin
2026-06-27 11:32:10 +12:00
Liam Cottle
2bb7495356
Merge pull request #2639 from sefinek/fix/typos-in-comments
...
fix: fix typos in source code comments
2026-06-27 11:26:54 +12:00
Liam Cottle
00df5fd04c
Merge pull request #2844 from oltaco/fix-rx-boosted-gain
...
Fix for Rx boosted gain on LR1110
2026-06-27 11:22:47 +12:00
Jody Bentley
cff3b4c6e7
GPS: poll up to 5s for cold-start detection instead of a single 1s check
...
initBasicGPS() waited a fixed 1 second and then decided the GPS was
present only if NMEA data had already arrived. Cold-start GPS modules
often need 2-5 seconds before they emit their first sentence, so on a
cold boot detection frequently failed. A failed detection sets
gps_detected = false, which hides all GPS CLI settings and disables GPS
time sync until the next reboot - so the GPS appears permanently dead
even though the hardware is fine.
Poll for up to ~5 seconds (in 250ms steps) and return as soon as any
data appears. Fast modules are detected almost immediately and add no
boot delay; slow cold-start modules now get enough time. The
ENV_SKIP_GPS_DETECT bypass is unchanged.
Fixes #2258 .
2026-06-26 10:44:18 -04:00
taco
1e5e1f4e0d
always save boosted gain setting
2026-06-26 22:36:49 +10:00
Quency-D
0d034d4738
Merge pull request #14 from meshcore-dev/dev
...
merge Dev
2026-06-26 17:16:23 +08:00
Liam Cottle
5ec30db9dd
Merge pull request #1194 from ViezeVingertjes/nibble_zero_connect
...
Added support for the nibble zero connect
2026-06-26 13:59:59 +12:00
taco
5eb4e7e5da
fix: report error when rxgain setting is unsupported or rejected
2026-06-26 08:45:03 +10:00
taco
1a90abdbe2
return bool when setting rx boost
2026-06-26 07:44:01 +10:00
ViezeVingertjes
f2a68a164f
Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds
2026-06-25 23:27:07 +02:00
ViezeVingertjes
3ba242894d
Address review comments and sync with dev
2026-06-25 23:26:55 +02:00
ViezeVingertjes
2c5259f263
Remove NeoPixel configuration as its unused.
2026-06-25 23:26:55 +02:00
ViezeVingertjes
7407536366
Added support for the nibble zero connect
2026-06-25 23:26:55 +02:00
taco
e076cd4e3d
remove guard on MyMesh::setRxBoostedGain()
2026-06-26 07:06:37 +10:00
liamcottle
b610750b24
initial support for elecrow thinknode m7
2026-06-25 16:03:27 +12:00
Nick Dunklee
ca586ced69
Added Heltec t096 and seeed t1000-e
...
Tested Heltec t096 and Seeed t1000-e, both support this
hardware feature.
2026-06-24 15:58:09 -06:00
Nick Dunklee
37bd27afa9
feat: use RAK hardware crypto on advert processing
...
While working on some sensor code implementations, I ran into
some hard crashes that root-caused to the 4KB loop task stack
being exhausted.
Looking for various optimization schemes resulted in this relatively
low-lift fix. RAK3401 and RAK4631 both support hardware crypto.
Rather than loading in one of the two software crypto libs,
we can just use the onboard hardware. This is faster, should
consume less power, and in testing used a scant up to 700
bytes in the run loop vs 2.5-3KB per advert.
This change **only** affects advert verification processing, which
currently consumes a significant chunk of the 4KB run loop.
I figured such a change should likely be implemented in phases.
After soaking, this hardware crypto verification
process could be implemented across the entire MeshCore
cryptographic function on RAK nodes. Also possible other nodes
have available hardware crypto, however, I have not checked,
so future improvements may also exist there.
Tested on:
- RAK3401 RAK 1W
- RAK4631 19001
2026-06-23 11:39:20 -06:00
UltimateCodeWarrior
a3a48badc8
Fix blank OLED on T-Beam Supreme V3 (I2C bus + 0x3D address)
...
The SH1106 OLED on the LilyGo T-Beam Supreme V3 never lights up because:
1. The primary I2C bus (Wire) that the OLED, BME280 and magnetometer share
is never initialized. The PMU/RTC use Wire1 (via XPowersLib); nothing
brings up Wire on PIN_BOARD_SDA/PIN_BOARD_SCL, so the display driver
talks on the wrong default pins.
2. The OLED is at I2C address 0x3D on this board (0x3C is taken by the
QMC6310 magnetometer), but SH1106Display::begin() only tried 0x3C.
Initialize Wire for TBEAM_SUPREME_SX1262, and have SH1106Display::begin()
prefer 0x3D (only ever used by the OLED) before falling back to 0x3C.
Backwards-compatible for boards with the OLED at 0x3C.
Closes #2609
2026-06-22 23:39:34 -07:00
ripplebiz
02e48b2eb6
Merge pull request #2752 from Quency-D/heltec-tower-v2
...
Add Heltec tower v2
2026-06-23 11:51:03 +10:00
ripplebiz
2c61050cbf
Merge pull request #2765 from fizzyfuzzle/ESP32-Reset-Reason
...
Add ESP32 Reset Reason to existing pwrmgt.bootreason cli command
2026-06-23 11:41:57 +10:00
ripplebiz
76a003eac0
Merge pull request #2771 from oltaco/nrf52-framework-buildfix
...
Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork
2026-06-23 11:37:03 +10:00
Liam Cottle
7077842765
Merge pull request #2810 from IoTThinks/MCDev-Fixed-GPS-Time-for-T114-202606
...
Fixed GPS time sync for Heltec T114
2026-06-22 14:19:09 +12:00
Kevin Le
07b07995a5
Fixed GPS time sync for Heltec T114
2026-06-22 09:13:36 +07:00
Ryan Gregg
7f1ecc2045
Merge remote-tracking branch 'upstream/dev' into rak-ethernet
...
# Conflicts:
# docs/faq.md
# examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00
ripplebiz
919d2cffe3
Merge pull request #1727 from weebl2000/use-hardware-channel-activity-detection
...
Use hardware channel activity detection for checking interference
2026-06-15 19:51:59 +10:00
taco
c44f1b706d
build fix for Heltec Mesh Solar and Mesh Pocket
2026-06-15 00:57:12 +10:00
Wessel Nieboer
e77b6b101f
Have CAD be a separate toggle (set cad on/off)
2026-06-14 15:20:58 +02:00
Wessel Nieboer
3f1c0fb60b
Prevent packet errors from growing
2026-06-14 15:19:20 +02:00
Wessel Nieboer
3c1511884e
Just check for not channel free
2026-06-14 15:19:19 +02:00
Wessel Nieboer
3095bc458b
Also return busy if preamble detected
2026-06-14 15:19:19 +02:00
Wessel Nieboer
720cd75167
Use hardware channel activity detection for checking interference
2026-06-14 15:19:18 +02:00
Marco
33b5e2f91c
Add ESP32 Reset Reason
2026-06-14 11:41:01 +02:00
Huw Duddy
af043a41b4
Merge pull request #2763 from meshcore-dev/anon-contacts-fix
...
* fix for anon contacts when full
2026-06-14 19:11:38 +10:00
Scott Powell
e2a00e664e
* fix for anon lastmod
2026-06-14 18:54:51 +10:00
Scott Powell
7728baae11
* fix for counter in RESP_CODE_CONTACTS_START
2026-06-14 18:39:34 +10:00
Scott Powell
326e8de439
* now handle the case where onAdvertRecv() should _replace_ the anon contact slot
2026-06-14 18:12:08 +10:00
Scott Powell
03dce189f1
* fix for anon contacts when full
2026-06-14 17:50:41 +10:00
ripplebiz
5ad21f8c65
Merge pull request #2140 from Quency-D/cli-lna-command
...
Add CLI control to LoRa's fem LNA.
2026-06-13 22:00:08 +10:00
Quency-D
06e7d0f282
Restore companion NodePrefs file ending
2026-06-13 17:40:11 +08:00
Quency-D
4e6e909f7e
Remove companion FEM RX gain command IDs
2026-06-13 17:31:54 +08:00
Scott Powell
840fe023e6
* PAYLOAD_TYPE_PATH bad path_len now rejected
2026-06-13 18:19:41 +10:00
Quency-D
f2a332b6fc
Fix low power consumption issues
2026-06-13 16:00:06 +08:00
Liam Cottle
c283a6e183
Merge pull request #2753 from formtapez/cli-docs
...
Added some missing CLI commands
2026-06-13 00:17:36 +12:00
formtapez
5ae8c26772
fix formatting
2026-06-12 12:14:46 +02:00
formtapez
b21b12ec7f
added some missing CLI commands
2026-06-12 12:11:12 +02:00
Quency-D
487457465b
Add maximum power limit
2026-06-12 18:05:27 +08:00
Quency-D
3517d26185
add tower v2 PA control
2026-06-12 17:58:19 +08:00
Liam Cottle
787e0bc49d
Merge pull request #2748 from liamcottle/github/stale-bot
...
Configure GitHub Stale Bot
2026-06-12 03:24:26 +12:00
liamcottle
f0899dc2b0
use single quotes for repo name
2026-06-12 03:20:44 +12:00
liamcottle
a7e9248587
add github workflow to close stale issues
2026-06-12 03:18:10 +12:00
Quency-D
b1bcb8f0df
Merge pull request #13 from meshcore-dev/dev
...
merge Dev
2026-06-11 15:30:31 +08:00
Liam Cottle
7e284ab709
Merge pull request #2691 from NoodlesNZ/security-policy
...
Add Github Security policy
2026-06-11 19:25:53 +12:00
Quency-D
606f8f1cc3
Merge branch 'dev' into cli-lna-command
2026-06-10 11:30:04 +08:00
ripplebiz
2ce4331c83
Merge pull request #2722 from liamcottle/fix/free-packet-on-parse-failure
...
Fix: CMD_SEND_RAW_PACKET not freeing packet on parse failure
2026-06-08 22:47:06 +10:00
liamcottle
145d50bda9
use releasePacket instead of _mgr->free
2026-06-09 00:42:58 +12:00
liamcottle
309ed80fa6
free packet on parse failure
2026-06-09 00:31:48 +12:00
Scott Powell
f7f8a331cd
Merge branch 'dev'
...
# Conflicts:
# docs/faq.md
2026-06-06 21:12:43 +10:00
Scott Powell
f4d0485dd6
* version 1.16.0
2026-06-06 21:09:38 +10:00
ripplebiz
444c8efb9d
Merge pull request #2702 from meshcore-dev/flood.max.advert
...
new CLI config: flood.max.advert
2026-06-06 21:05:22 +10:00
Scott Powell
a4c1981e6a
* default now 8, per the will of the peoples.
2026-06-06 21:00:58 +10:00
Liam Cottle
9e30f117f4
Merge pull request #2703 from IoTThinks/Fixed-powersaving--in-cli_commands.md-2026-06
...
Change default power saving setting to 'off'
2026-06-06 16:09:27 +12:00
IoTThinks
f74c1ab368
Change default power saving setting to 'off'
2026-06-06 11:04:36 +07:00
Scott Powell
d66597c3e7
* new CLI config: flood.max.advert (default 16)
2026-06-06 13:09:24 +10:00
Scott Powell
6a1a4601ba
* number allocations: Ripple range reserved
2026-06-06 12:45:35 +10:00
Nick Le Mouton
71cb0f7ec0
Add SECURITY.md
2026-06-05 21:25:25 +12:00
ripplebiz
e19984f26a
Merge pull request #2684 from oltaco/rp2040-build-fixes
...
Build fixes for some RP2040 targets
2026-06-05 12:30:08 +10:00
Liam Cottle
8f6fce5a3d
Merge pull request #2463 from NoodlesNZ/fix-stddef
...
Add stddef.h to fix compilation issue on MacOS
2026-06-05 11:29:44 +12:00
Liam Cottle
1511501516
Merge pull request #2685 from oltaco/more-build-fixes
...
Build fixes for nibble_screen_connect and ThinkNode M2
2026-06-05 03:08:10 +12:00
taco
40111d3dcb
build fixes for nibble_screen_connect and thinknode_m2
2026-06-05 00:55:02 +10:00
taco
653a52f31b
build fix for rp2040 companion usb
2026-06-04 23:36:51 +10:00
taco
a0d7f2b9e2
add missing radio_init() for rak11310
2026-06-04 23:30:50 +10:00
taco
2488de7dbd
pin platform-raspberrypi to 4e22a0d
...
pins framework-arduinopico @ 1.50600.0+sha.6a1d13e9
2026-06-04 23:21:41 +10:00
Liam Cottle
36e50dee9e
Merge pull request #2683 from oltaco/techo-card-buildfixes
...
build fixes for LilyGo T-Echo Card
2026-06-04 21:40:11 +12:00
taco
337e35b2ff
build fixes for LilyGo T-Echo Card
2026-06-04 19:05:58 +10:00
Liam Cottle
cfe27b3a6f
Merge pull request #2672 from meshcore-dev/non-contact-requests
...
Non contact requests
2026-06-04 16:05:47 +12:00
Liam Cottle
1ca66e4cd4
Merge pull request #2671 from sefinek/fix/typos-grammar-formatting
...
Fix typos and formatting in documentation and comments
2026-06-04 15:57:48 +12:00
ripplebiz
3c9b234c73
Merge pull request #2663 from oltaco/no-autoshutdown-when-powered
...
Disable auto-shutdown when externally powered, add auto-shutdown warning for OLED displays
2026-06-04 13:42:00 +10:00
Scott Powell
60fa9ff18f
* powersaving on/off lowercase fix
2026-06-04 13:36:18 +10:00
ripplebiz
cb497c50c2
Merge pull request #1687 from IoTThinks/MCdev-PowerSaving-for-all-esp32-repeaters-202602
...
Added PowerSaving for all ESP32-based repeaters
2026-06-04 13:31:51 +10:00
Liam Cottle
41b89084ba
Merge pull request #2022 from weebl2000/adjust-max-framesize
...
Increase MAX_FRAME_SIZE by 4 bytes
2026-06-03 19:58:01 +12:00
Kevin Le
c972871508
Added "override" to getIRQGpio() for ESP32Board.h
2026-06-03 14:10:28 +07:00
Sefinek
03a3cf4584
docs: fix remaining rendering issues
2026-06-03 00:38:53 +02:00
Sefinek
0b0db507e3
docs: fix remaining rendering issues
2026-06-03 00:32:25 +02:00
Sefinek
0a60cb7501
docs: fix remaining rendering issues
2026-06-03 00:28:09 +02:00
Sefinek
df7aed8310
docs: fix remaining rendering issues
2026-06-03 00:24:01 +02:00
Sefinek
1ba4a45043
docs: add missing periods at sentence endings
2026-06-03 00:15:26 +02:00
Sefinek
245f60b00d
docs: fix FAQ rendering
2026-06-03 00:14:29 +02:00
Sefinek
1b51cb9574
docs: fix FAQ heading capitalization
2026-06-02 23:57:50 +02:00
Sefinek
de0cce9c75
docs: fix FAQ link rendering
2026-06-02 23:48:28 +02:00
Sefinek
215010901c
docs: fix FAQ rendering
2026-06-02 23:35:02 +02:00
Sefinek
6ce32a42e4
docs: fix FAQ resource link rendering
2026-06-02 23:31:25 +02:00
Sefinek
d1a641a317
docs: fix FAQ bullet list rendering
2026-06-02 22:34:38 +02:00
Sefinek
412dbdf8e4
docs: fix FAQ bullet list rendering
2026-06-02 22:30:42 +02:00
Sefinek
87c33fccb3
docs: remove extra FAQ TOC indentation
2026-06-02 22:28:15 +02:00
Sefinek
4ace26210c
docs: fix typos, grammar, and formatting in FAQ and code comments
2026-06-02 22:12:18 +02:00
Sefinek
fe5a7b05a1
chore: normalize board JSON line endings
2026-06-02 15:34:00 +02:00
Liam Cottle
2f7f3c9ffa
Merge pull request #2641 from sefinek/ci/update-github-actions
...
ci: update GitHub Actions and Python version
2026-06-03 01:26:35 +12:00
Liam Cottle
6426847acb
Merge pull request #2664 from entr0p1/fix/rak_wismesh_tag_platform
...
Rak WisMesh Tag fixes
2026-06-02 23:01:22 +12:00
taco
a6f3116fc7
bypass auto-shutdown delay for e-ink devices
2026-06-02 18:37:18 +10:00
taco
6990bca252
add bool isEink() for eink display drivers
2026-06-02 18:36:07 +10:00
entr0p1
13228f60b8
Rak WisMesh Tag fixes
...
- Remove debug flag
- Correct lib_deps from rak4631 to rak_wismesh_tag
- Correct extends from rak4631 to rak_wismesh_tag
2026-06-02 16:17:08 +10:00
Scott Powell
c09f9c7a1f
* direct/zero hop by default
2026-06-02 15:32:28 +10:00
Scott Powell
3a707fad43
* simplified the new flood.max.unscoped pref
2026-06-02 14:15:33 +10:00
ripplebiz
fb517b2164
Merge pull request #2661 from mrzarquon/mrz/flood_max_unscoped
...
Implement flood.max.unscoped to allow selective repeating of unscoped messages
2026-06-02 14:00:33 +10:00
Liam Cottle
c63390650d
Merge pull request #2636 from sefinek/fix/cmd-device-query-typo
...
fix: rename CMD_DEVICE_QEURY to CMD_DEVICE_QUERY
2026-06-02 12:41:57 +12:00
Liam Cottle
7feea5981a
Merge pull request #2635 from sefinek/docs/fix-typos-and-grammar
...
docs: fix typos, grammar issues and standardise Wi-Fi spelling
2026-06-02 12:41:30 +12:00
Chris Barker
f430d9f990
Updates Docs to reflect flood.max.unscoped behavior.
2026-06-01 21:30:31 +01:00
Chris Barker
a7bb4bef76
Feat: Adds flood.max.unscoped setting
...
Before this commit, there was no way to set a different max hop count
for unscoped messages.
Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
2026-06-01 21:30:17 +01:00
taco
7f0610fea5
NRF52: disable autoshutdown if powered, add auto-shutdown warning for oled
2026-06-02 00:55:25 +10:00
taco
651831dca8
NRF52Board: ungate isExternalPowered()
2026-06-02 00:53:00 +10:00
Scott Powell
ac507c2b3e
* Bug fix: adding neighbor when path_mode != 0
2026-06-01 23:08:39 +10:00
ripplebiz
8b900d450b
Merge pull request #2655 from fdlamotte/wio-e5-fix
...
stm32: make subghz dep fix global and update framework
2026-06-01 22:39:01 +10:00
Scott Powell
e0b87d5ed3
* contacts sync fix
...
* fix for reusing transient/anon contacts only
2026-06-01 19:04:42 +10:00
Scott Powell
26ce9cf733
* first draft
2026-06-01 16:49:31 +10:00
Florent
a979cdb7a0
stm32: make subghz dep fix global and update framework
2026-06-01 08:39:09 +02:00
ripplebiz
f485684499
Merge pull request #2650 from LeoCatsune/fix/wioe5mini
...
fix: update wio-e5-mini pio config to address SubGhz dependency issue
2026-06-01 15:59:47 +10:00
ripplebiz
633046c106
Merge pull request #2634 from NickDunklee/bme680-fixes-consolidation
...
feat: Integrate BME680 Bosch BSEC support for RAK4631
2026-06-01 13:35:32 +10:00
ripplebiz
373a02cdc4
Merge pull request #2637 from sefinek/docs/remove-duplicate-rxgain-entry
...
docs: remove duplicate radio.rxgain entry and fix hardware note
2026-06-01 13:23:11 +10:00
ripplebiz
451f2ba6b4
Merge pull request #2643 from disq/companion-display-keep-on-when-powered
...
companion_radio: Add optional `KEEP_DISPLAY_ON_USB` flag to keep display on while powered 🤖 🤖
2026-06-01 13:18:34 +10:00
Scott Powell
4c64c374c9
* power saving: hasPendingWork() now also checks if there's a pending contacts write
2026-05-31 18:52:42 +10:00
ripplebiz
580032b6a8
Merge pull request #2286 from IoTThinks/MCdev-PowerSaving-for-nrf52-companion-202604
...
Added Power Saving for NRF52 companions to have extra 30% battery life
2026-05-31 18:49:46 +10:00
Leo
f6d57b6453
fix: update wio-e5-mini pio config to address SubGhz dependency issue
2026-05-31 18:47:24 +10:00
Kemal Hadimli and Claude Opus 4.7
3fd0ac9f74
companion_radio: opt-in KEEP_DISPLAY_ON_USB to keep OLED on while powered
...
AUTO_OFF_MILLIS is a power-save feature aimed at battery use. When the
board reports isExternalPowered() == true (USB or other DC source),
blanking the screen serves no purpose — there's nothing to conserve.
But OLEDs are vulnerable to burn-in with static content, so this
behaviour is gated behind a new build flag KEEP_DISPLAY_ON_USB. Default
is unchanged from upstream — the display blanks after AUTO_OFF_MILLIS
on USB or battery. Variants that ship with an LCD instead of an OLED
(e.g. heltec_t096) can opt in by adding -D KEEP_DISPLAY_ON_USB to
their env, gaining always-on-while-powered without exposing OLED users
to burn-in risk.
When the flag is enabled, the implementation refreshes _auto_off every
loop iteration while externally powered, so the timer naturally counts
a fresh AUTO_OFF_MILLIS window from the moment power is removed —
no instantaneous-blank-on-unplug.
Applied to all three companion_radio UI flavours (ui-new, ui-tiny,
ui-orig). Boards without an isExternalPowered() override use the
base-class default in MeshCore.h (returns false), so battery-powered
behaviour is unchanged everywhere.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com >
2026-05-29 11:25:48 +01:00
Nick Dunklee
b5cb2a7e61
8 hour save window, LP, 28 day calibration window
2026-05-28 18:35:22 -06:00
Sefinek
66b1e13768
fix: fix typos in source code comments
2026-05-28 16:38:39 +02:00
Sefinek
4a58c91915
docs: fix minor typos in README and terminal_chat_cli
2026-05-28 16:38:15 +02:00
Sefinek
40b17896a5
ci: pin peaceiris/actions-gh-pages to v4.1.0 for Node.js 24 support
2026-05-28 16:10:46 +02:00
Sefinek
c68316a9fe
ci: update GitHub Actions and Python version, fix ruby-version typo
2026-05-28 16:01:59 +02:00
Sefinek
a3f80144cd
fix: fix typos in source code comments
2026-05-28 15:44:56 +02:00
Sefinek
afd883ed1e
docs: fix broken and misaligned tables
2026-05-28 15:15:47 +02:00
Sefinek
c99fe41b1e
docs: remove duplicate radio.rxgain entry and fix hardware note
2026-05-28 14:52:00 +02:00
Sefinek
d087ae4b55
fix: rename CMD_DEVICE_QEURY to CMD_DEVICE_QUERY
2026-05-28 14:39:12 +02:00
Sefinek
a3a52e58fa
docs: fix typos, grammar and Wi-Fi capitalisation across docs
2026-05-28 14:23:31 +02:00
Kevin Le
e9d4cd8f53
Reduced time drift from 60s/day to 7s/day for ESP32-based repeaters with power saving.
2026-05-28 15:13:14 +07:00
Kevin Le
eccae0f614
Fixed Interrupt WDT Reset
2026-05-28 15:13:14 +07:00
Kevin Le
e4e93091df
Gave MCU to OTA to run in inhibit_sleep
2026-05-28 15:13:14 +07:00
Kevin Le
55a025f159
Moved LoRa GPIOs to platformio.ini for TBeam boards
2026-05-28 15:13:14 +07:00
Kevin Le
722cfb2254
Added getIRQGpio to return DIO0 for Lilygo TLoRa SX1276
2026-05-28 15:13:14 +07:00
Kevin Le
1eb38948cf
Added getIRQGpio to return DIO0 for Lilygo T3S3 SX1276
2026-05-28 15:13:14 +07:00
Kevin Le
33f604dafe
Fixed DIO0, DIO1 and RESET for Heltec v2
2026-05-28 15:13:14 +07:00
Kevin Le
6c250414c6
Added getIRQGpio to return DIO1 (SX1262) and DIO0 (SX127x)
2026-05-28 15:13:10 +07:00
Kevin Le
a50a5c500b
Supported sleep for all ESP32-based repeaters
2026-05-28 15:10:36 +07:00
Kevin Le
afbf6c302e
Added detailed response for powersaving CLI
2026-05-28 15:10:36 +07:00
Kevin Le
6ff6da2865
Let ESP32-based repeaters to sleep immediately receiving and process a LoRa packet
2026-05-28 15:10:36 +07:00
Nick Dunklee
24d2815c9c
Am idiot, and deleted some of the adafruit code path
...
I put it back and test-compiled a few builds.
2026-05-27 16:28:15 -06:00
Nick Dunklee
a54b11dd50
feat: Integrate BME680 Bosch BSEC support for RAK4631
...
This is a consolidation of my changes for BME680 on RAK4631 nodes.
I will close my other PRs related to this and link back to this one.
*Background on change:*
This change replaces the Adafruit BME680 driver on RAK4631 with the
Bosch BSEC library. Other boards continue to use the existing
Adafruit path via ENV_INCLUDE_BME680.
This makes the IAQ portion of the sensor functional, and more accurate.
It also contains the math and/or CayenneLPP fixes from my other PRs.
The Bosch code also appears to handle calibrating sensor aging as well,
whereas the Adafruit code is just looking at blind values that can drift
with time. Pretty cool to see this shooting out useful data!
RAK4631 platform.io is set to override to ENV_INCLUDE_BME680_BSEC while
leaving the Adafruit code for other node types. (If this becomes applicable
for other node types in future, awesome! I just don't have hardware
to test against.)
Using the BSEC library introduces IAQ sensor calibration, and saves
the calibration state periodically so it does not have to calibrate
again later.
At startup the IAQ sensor takes 30 minutes to heat and to hit a baseline,
then starts calibrating. Once calibrated, it will save those settings
and will only write settings again if calibration falls back and restores
back to state 3.
This fix also has the gas resistance math fix that was in
[pull 2146](https://github.com/meshcore-dev/MeshCore/pull/2146 ) so
the adafruit path also can at least show accurate values instead
of looping negative.
Also includes the fix from [pull 2149](https://github.com/meshcore-dev/MeshCore/pull/2149 ) so the pressure output isn't truncated to 1hPa steps.
*Fixes/Changes:*
- Add bsec_config_iaq[] with the 3.3V/3s-LP/28d calibration profile
- BSEC init applies setConfig() for voltage-correct heater targeting
- IAQ, heat-compensated temperature/humidity, pressure, and altitude
reported over CayenneLPP
- IAQ accuracy reported as analog input over CayenneLPP (0,1,2,3)
- Calibration state persisted to /bsec_state.bin on nRF52 internal
flash; written only when iaqAccuracy improves to >= 2, should
keep write frequency well within flash endurance over device lifetime
- Fix non-BSEC query_bme680: float pressure division, addGenericSensor
for gas resistance (was addAnalogInput, overflows at > 327 Ohm)
- loop() correctly gated for both GPS and BSEC-only builds
- Add fix_bsec_lib.py extra_script to resolve nRF52840 hard-float ABI
mismatch in Bosch's PlatformIO packaging, silly Bosch
One general note outside of this code change: I noticed while BME680
_functions_ in companion nodes, since companion nodes run Bluetooth,
BLE preempts the CPU, and can do so mid-I2C-transaction.
This can cause the BME680 to see an anomaly and drop calibration and
start a recalibrate. This is behavior that will exist (and has existed)
regardless of using the Adafruit or Bosch paths.
This particular companion behavior does not seem to occur in sensor
or repeater nodes since their BLE is off. Probably affects other
I2C devices as well.
*Tests:*
- RAK19003
- RAK19007
- RAK19001
- repeater, sensor, companion
2026-05-27 15:33:48 -06:00
Quency-D
7461d8ff0a
Merge pull request #11 from meshcore-dev/dev
...
merge Dev
2026-05-27 15:43:22 +08:00
Quency-D
724646a359
Optimize ADC readout
2026-05-27 15:12:59 +08:00
Wessel Nieboer
22510ab8cf
Increase MAX_FRAME_SIZE by 4 bytes
...
It's the safest fix for now to fix region scoped messages from being
dropped early
2026-05-26 11:51:14 +02:00
Liam Cottle
8bb92799f2
Merge pull request #2621 from AtlavoxDev/feature/mainboard-boot-complete-hook
...
Feature/mainboard boot complete hook
2026-05-26 02:04:49 +12:00
AtlavoxDev
6a3db76e27
Rename bootComplete() to onBootComplete() for naming consistency
...
Matches the existing event-style lifecycle hooks on MainBoard
(onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.
2026-05-25 09:50:28 -04:00
AtlavoxDev
bb8e40ff22
Add MainBoard::bootComplete() hook for boot-indicator LED feedback
...
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
2026-05-25 09:04:47 -04:00
ripplebiz
b655eb9b20
Merge pull request #2620 from jirogit/feat/kiss-modem-xiao-s3-v2
...
feat(xiao_s3): add kiss modem env
2026-05-25 12:00:46 +10:00
me
e8fc488332
feat(xiao_s3): add kiss modem env
2026-05-24 14:03:28 -07:00
Liam Cottle
5251cf52e8
Merge pull request #2615 from omeg/omeg/respect-i2c-address
...
Respect predefined I2C addresses in EnvironmentSensorManager
2026-05-25 00:04:49 +12:00
Rafał Wojdyła
67c172b38e
Respect predefined I2C addresses in EnvironmentSensorManager
2026-05-24 13:16:50 +02:00
fdlamotte
3eebda66d0
Merge pull request #2235 from jirogit/fix/lr1110-rxgain-cli-guard
...
fix: enable radio.rxgain CLI command for LR1110 (T1000-E)
2026-05-24 11:56:23 +02:00
ripplebiz
fba9f92713
Merge pull request #2540 from agessaman/feat/regions-quick-loasd
...
Add bulk region hierarchy command to CLI
2026-05-23 18:37:28 +10:00
ripplebiz
b025b12e2a
Merge pull request #2608 from recrof/flood-advert-interval-47
...
Set flood advert interval to 47h for new installs
2026-05-23 15:37:31 +10:00
ripplebiz
74984f1756
Merge pull request #2604 from recrof/patch-1
...
Companion repeat: update to more usable default EU frequency
2026-05-23 15:19:30 +10:00
Rastislav Vysoky
34688b0696
Companion repeat: update to more usable default EU frequency
...
869.495 is in 869.4 to 869.65 range which does have 10% duty cycle and 500mW ERP.
2026-05-22 17:04:19 +02:00
Liam Cottle
52ecab8f66
Merge pull request #2590 from jocasmark/fix/typos
...
Fix typos in comments and docs
2026-05-22 19:38:19 +12:00
Mark Jocas
a52c82a36e
Revert typo fix from external libraries
...
Reverts typo fixes in comments within external libs.
2026-05-22 09:32:54 +02:00
Kevin Le
111a1e04fc
Fixed hasPendingWork for BLE companions
2026-05-22 10:58:21 +07:00
Kevin Le
824cdb090d
Fixed to put hasPendingWork out of ENV_INCLUDE_GPS
2026-05-22 10:58:21 +07:00
Kevin Le
68bdd61983
Added Power Saving for NRF52 companions
2026-05-22 10:58:17 +07:00
agessaman
c9b44367d6
Refactor region def with helpers, refine docs
...
Extract the inline cursor-walk in handleRegionCmd into file-local
helpers (skipSpaces, rtrimSpaces, takeToken, splitNameJump,
processRegionDefSegment), grouped immediately above the consumer.
Behavior is identical; addresses PR #2540 review feedback on
readability.
Tighten the region def docs: collapse five Note callouts into three
grouped paragraphs (Behavior / Existing regions / Limits), add a
case-sensitivity caveat plus an error example, note the cursor reset
between split commands, and use generic placeholder names.
2026-05-21 19:25:01 -07:00
Rastislav Vysoky
d451d11d63
Change room server flood advert interval to 47 hours
2026-05-21 14:53:49 +02:00
Rastislav Vysoky
3e0b9da426
Update repeater flood advert interval to 47 hours
2026-05-21 14:50:58 +02:00
ripplebiz
c94a9c2589
Merge pull request #2517 from oltaco/techo-card
...
Add support for LilyGo T-Echo Card (and tiny-ui!)
2026-05-21 20:45:54 +10:00
taco
152c0c5069
fix debug params for t-echo card
2026-05-21 19:58:10 +10:00
taco
d41d1da290
remove deprecated functions, fix typo and style
2026-05-21 19:58:10 +10:00
taco
6c669893de
tiny ui rendering fixes
2026-05-21 19:58:10 +10:00
taco
19e4e662c4
add torch
2026-05-21 19:58:10 +10:00
taco
0abeb73f84
add tinyui for lilygo t-echo card
2026-05-21 19:58:10 +10:00
taco
321e10147a
u8g2 wrapper: allow larger font when size >= 2
2026-05-21 19:58:10 +10:00
pelgraine
dade33c044
add wrapper for u8g2 display driver
2026-05-21 19:58:10 +10:00
taco
2420925101
initial t-echo card support
2026-05-21 19:58:10 +10:00
Huw Duddy
8d80f5e622
Merge pull request #2443 from kizniche/fix-rxdelay-txdelay
...
Fix: Enforce upper bounds for rxdelay, txdelay, and direct.txdelay
2026-05-21 16:57:41 +10:00
Liam Cottle
10db9468b2
Merge pull request #2594 from meshcore-dev/extended-ack
...
support for sending 6-byte ACKs
2026-05-21 17:45:03 +12:00
Scott Powell
2877e2860d
* added 6th byte to ACK, with RNG
2026-05-21 00:00:03 +10:00
Huw Duddy
349ad51cf6
Merge pull request #2576 from csrutil/fix/heltec-t096-sensor-env
...
Add Heltec T096 sensor environment
2026-05-20 22:21:58 +10:00
Liam Cottle
13cf431c08
Merge pull request #2592 from oltaco/nrf52-pio-target-fix
...
Fix upload and monitor targets for nrf52 envs
2026-05-20 22:26:58 +12:00
taco
7503a144b3
add openocd_target to lilygo t-impulse board.json
2026-05-20 20:02:18 +10:00
Mark Jocas
cacb5d8c2b
Corrects typos and grammatical errors
...
Improves readability across documentation and inline comments by fixing common spelling mistakes and duplicate words.
2026-05-20 08:33:48 +02:00
Quency-D
8c9fc1667e
Merge branch 'dev' into cli-lna-command
2026-05-20 10:13:28 +08:00
Scott Powell
d806870aef
* bug fix
2026-05-19 17:06:42 +10:00
Ryan Gregg
410542d0bc
Fix companion disconnect on inbound packet; use server.accept()
...
EthernetServer::available() returns any socket with data, including the
already-connected client's socket. The companion path then called stop()
on what it thought was a duplicate client, closing the shared socket and
disconnecting the companion after the first packet.
Switch both SerialEthernetInterface and EthernetCLI to server.accept(),
which only returns newly-accepted sockets. Removes the IP/port duplicate
detection in the companion path (no longer reachable) and the same-socket
early-return in the CLI path.
Reported by mcode6726 on PR #1983 .
2026-05-18 21:04:09 +00:00
Ryan Gregg
4761d49449
Merge remote-tracking branch 'upstream/dev' into rak-ethernet
...
# Conflicts:
# examples/companion_radio/main.cpp
2026-05-18 20:57:28 +00:00
Scott Powell
ab96718a84
* fix
2026-05-17 22:38:42 +10:00
Scott Powell
19499a4eda
* support for sending 5-byte ACKs
2026-05-17 22:10:13 +10:00
csrutil
0e2a9a0848
Add Heltec T096 sensor environment
2026-05-17 16:17:05 +08:00
Liam Cottle
242ca7a9e6
Merge pull request #2574 from ViezeVingertjes/docs/kiss-txbusy-error
...
Document HW_ERR_TX_BUSY in KISS modem protocol
2026-05-17 12:37:15 +12:00
agessaman
335dec8366
Update CLI command from region bulk to region def
2026-05-16 10:47:51 -07:00
ViezeVingertjes
b3efbd2b95
Document HW_ERR_TX_BUSY in KISS modem protocol
2026-05-16 11:32:33 +02:00
ripplebiz
8c47ce072a
Merge pull request #2567 from recrof/patch-4
...
Change MeshCore intro video link to The Comms Channel's MC intro playlist
2026-05-16 13:03:00 +10:00
Quency-D
1ff1e7b8e0
Added touch reset
2026-05-16 10:59:02 +08:00
Kevin Le
7489ae8f88
Added flash_mode=dio to avoid boot loop when flashing using merge.bin
2026-05-16 09:30:49 +07:00
Emily Kerst
9c60a4a217
chore: reformat T-Echo Lite platformio.ini to keep normal and non-shell variants together
2026-05-15 20:20:27 +02:00
Emily Kerst and Natalie Kagelmacher
faed93543f
Added USB Companion variant for LilyGo T-Echo Lite
...
Co-authored-by: Natalie Kagelmacher <natalie@kagelmacher.ch >
Mentored-by: Natalie Kagelmacher <natalie@kagelmacher.ch >
Tested-by: Emily Kerst <emily.git@emk0.net >
2026-05-15 20:10:31 +02:00
Rastislav Vysoky
3442e1ab6f
Change MeshCore intro video link to The Comms Channel's MC intro playlist
2026-05-15 16:42:29 +02:00
Liam Cottle
788b8fb14c
Merge pull request #2565 from willumpie82/ble-pin-code
...
Disable BLE_PIN_CODE for E290 companion USB environment
2026-05-15 23:17:43 +12:00
Willem Oldemans
89ccec6a03
Remove static BLE_PIN_CODE definition from Heltec E290_usb configuration
2026-05-15 13:09:59 +02:00
Willem Oldemans
bd7b2e62ee
Disable BLE_PIN_CODE for E290 companion USB environment
...
Remove the hardcoded BLE_PIN_CODE build flag from the Heltec_E290_companion_ble
environment. The presence of BLE_PIN_CODE prevents the unit from operating as a
USB companion. Commenting it out allows dynamic PIN generation and enables USB
companion functionality.
2026-05-15 12:57:36 +02:00
Liam Cottle
f91596bfb2
Merge pull request #2493 from Rococo88/complex-wifi-reconnect
...
Refactor WiFi auto-reconnect to use non-blocking polling
2026-05-15 21:21:16 +12:00
Quency-D
eaee3b9581
Add heltec -v4-r8 board
2026-05-15 16:53:18 +08:00
ripplebiz
e674280570
Merge pull request #2497 from oltaco/reduce-esp32-dram
...
Reduce dram0_0 usage on older ESP32 boards
2026-05-15 14:04:42 +10:00
ripplebiz
98c2981987
Merge pull request #2515 from Cisien/station-g3-esp32
...
Add support for Station G3 and its software configurable LNA/PA1
2026-05-15 13:58:42 +10:00
ripplebiz
c4015a5b9e
Merge pull request #2532 from swaits/fix/trace-offset-widening
...
fix(mesh): widen TRACE offset to uint16 to avoid narrowing
2026-05-15 13:17:03 +10:00
Liam Cottle
13a04f2dc9
Merge pull request #2543 from meshcore-dev/cmd-send-raw
...
new CMD_SEND_RAW_PACKET
2026-05-13 22:10:52 +12:00
Scott Powell
efa0f86fa7
* new CMD_SEND_RAW_PACKET
2026-05-13 13:28:56 +10:00
Liam Cottle
255ee83ffe
Merge pull request #2541 from AI7NC/patch-2
...
Update cli_commands.md to include 'ver'
2026-05-13 14:43:10 +12:00
AI7NC
c088f9103c
Update cli_commands.md to include 'ver'
...
Include the 'ver' command for retrieving the firmware version
2026-05-12 12:42:33 -07:00
agessaman
cfe6cb09bc
Add bulk region hierarchy command to CLI
...
Add a new command `region bulk` for defining region hierarchies in a single line. This command allows users to create multiple regions in a single message. Updated the documentation to include usage examples and detailed parameter descriptions.
2026-05-12 12:08:03 -07:00
Huw Duddy
06a5242ddc
Merge pull request #2536 from recrof/patch-3
...
revert: "feat: Enable GPS on RAK 1W kit" (#2401 )
2026-05-13 00:41:41 +10:00
Rastislav Vysoky
266eb349d4
revert: "feat: Enable GPS on RAK 1W kit" ( #2401 )
...
reverted changes to RAK_BOARD and PIN_GPS_EN. setting `RAK_BOARD` would cause radio to stop working and end with RadioLib error -707
2026-05-12 15:56:28 +02:00
Quency-D
50eca5bff0
add heltec tower v2
2026-05-12 14:53:17 +08:00
Stephen Waits
16087b942b
fix(mesh): widen TRACE offset to uint16 to avoid narrowing
2026-05-11 19:32:56 -06:00
liamcottle
af230c7be5
fix gps pins for lilygo t impulse plus
2026-05-12 10:36:19 +12:00
Liam Cottle
e3426309e7
Merge pull request #2522 from liamcottle/board/lilygo-t-impulse-plus
...
Add support for LilyGo T-Impulse-Plus
2026-05-12 01:39:44 +12:00
liamcottle
f4b31d3e51
turn off 3.3v rail when powering off
2026-05-12 01:06:22 +12:00
Liam Cottle
431133a39d
Merge pull request #2520 from Quency-D/heltec-mesh-node-t1
...
add heltec-mesh-node-t1
2026-05-12 00:38:14 +12:00
liamcottle
29c5f33079
fix battery voltage reading
2026-05-11 22:17:53 +12:00
liamcottle
57dad2393a
initial support for lilygo t impulse plus
2026-05-11 22:05:06 +12:00
Liam Cottle
881e0cf1db
Merge pull request #2519 from oltaco/customlfs-0.2.2
...
pin CustomLFS to version 0.2.2
2026-05-11 21:33:05 +12:00
Quency-D
e9b8926155
add heltec-mesh-node-t1
2026-05-11 15:11:07 +08:00
taco
f195d93392
pin CustomLFS to version 0.2.2
...
CustomLFS 0.2.2 adds support for the flash chip in LilyGo T-Echo Card and T-Echo Lite
2026-05-11 11:37:56 +10:00
Huw Duddy
a73dcdfd87
Merge pull request #2503 from jirogit/fix/techo-lite-non-shell-usb
...
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-10 22:40:12 +10:00
Liam Cottle
93b77513b4
Merge pull request #2516 from oltaco/disable-ds3231-probe
...
Add option to disable DS3231 RTC probe
2026-05-10 22:48:47 +12:00
taco
56672fc61e
add option to disable DS3231 probe
2026-05-10 20:29:47 +10:00
Huw Duddy
43e8282a5f
Merge pull request #2511 from entr0p1/techo-lite-rf-fix
...
Corrected T-Echo Lite SX1262 RXEN and TXEN pins, TCXO voltage.
2026-05-10 19:55:20 +10:00
Chris
9078a822f7
Add support for Station G3 and its software configurable LNA and PA1
2026-05-09 13:53:20 -07:00
Quency-D
747845cfc2
Merge branch 'dev' into cli-lna-command
2026-05-09 18:19:31 +08:00
Quency-D
1b2faf07fc
Merge branch 'dev' into solar-watchdog
2026-05-09 18:08:32 +08:00
entr0p1
5f59a5b7fc
T-Echo Lite LoRa radio fixes
...
- Set TCXO voltage to 1.8 (not defined previously, falls back to default)
- Set correct variable name for SX1262 RX/TX pins
- Fix SX1262 RX pin number
2026-05-09 14:26:55 +10:00
Liam Cottle
13684f9212
Merge pull request #2490 from tuzzmaniandevil/dev
...
Enhance KissModem frame processing and timeout handling
2026-05-08 23:23:14 +12:00
Huw Duddy
5a4600e7ae
Merge pull request #2505 from liamcottle/feature/companion-repeat-build-flag
...
Add build flag to configure allowed repeat frequency range
2026-05-08 18:29:49 +10:00
liamcottle
f35f5b9b5e
add build flag to configure allowed repeat freq range
2026-05-08 20:16:45 +12:00
jirogit
81936fa398
feat(techo-lite): add USB companion radio target for non-shell variant
2026-05-08 00:38:04 -07:00
tuzzmaniandevil
6865daea8f
Address two comments from PR
2026-05-08 11:14:22 +12:00
taco
0a330ffee2
reduce dram0_0 usage by lowering OFFLINE_QUEUE_SIZE
...
some older ESP32 boards were pushing the limits of the dram segment causing the linker to fail, especially for ble and wifi firmwares.
lowering OFFLINE_QUEUE_SIZE reduces dram usage
2026-05-08 00:40:33 +10:00
Liam Cottle
62f7c7f1fc
Merge pull request #2494 from uwl-cpe-2025/fix/missing-include
...
Add missing Wire.h include to sensors
2026-05-08 00:38:33 +12:00
Josiah VanderZee
8b192bd4c3
Add missing Wire.h include for sensors
...
This slipped through in PR #2327 and I noticed because the TechoBoard.h
for my variant doesn't include the Wire header, so the source file
in question does not coincidentally obtain a copy.
2026-05-07 07:20:48 -05:00
Rococo88
49d7e91ed2
Refactor WiFi auto-reconnect to use non-blocking polling
2026-05-07 12:24:06 +02:00
Liam Cottle
b9ed6da4c1
Merge pull request #2492 from meshcore-dev/set-flood-scope-none
...
Companion: Set flood scope to None
2026-05-07 21:49:11 +12:00
Scott Powell
f63fdc0ad4
* CMD_SET_FLOOD_SCOPE_KEY, now with second variant for explicitly sending un-scoped
...
* FIRMWARE_VER_CODE bumped to 12
2026-05-07 16:51:03 +10:00
Liam Cottle
3ac2ddd02f
Merge pull request #2488 from weebl2000/fix-rak-pin-gps-en-undefined
...
Gate PIN_GPS_EN
2026-05-07 18:44:37 +12:00
ripplebiz
faa3392d0b
Merge pull request #2327 from NickDunklee/fix-environment-sensor-refactor
...
fix(sensors): improve sensor initialization and handling to prevent hangs and handle growth
2026-05-07 15:58:10 +10:00
tuzzmaniandevil
cba90a82f2
Enhance KissModem frame processing and timeout handling
2026-05-07 00:03:09 +00:00
Wessel Nieboer
b18109b9d2
Gate PIN_GPS_EN
...
Do not reference it unconditionally
2026-05-07 00:31:15 +02:00
Huw Duddy
a9809aa731
Merge pull request #2483 from oltaco/dev
...
fix CustomLFS version pinning
2026-05-06 23:59:51 +10:00
taco
0a3d15b1f1
fix CustomLFS version pinning
2026-05-06 23:53:35 +10:00
Liam Cottle
2a231ea63b
Merge pull request #2480 from KPrivitt/dev
...
Incorrect time_t TypeDef used in RAK12035_SoilMoisture
2026-05-06 17:46:57 +12:00
ripplebiz
974297bf7d
Merge pull request #2445 from kizniche/update-docs-txdelay-rxdelay
...
Docs: Add explanatory notes for txdelay, direct.txdelay, and rxdelay
2026-05-06 14:37:36 +10:00
ripplebiz
43cb64f892
Merge pull request #2475 from uwl-cpe-2025/fix/ST7789-reset-timing
...
Do not perform redundant reset on ST7789 displays
2026-05-06 14:32:30 +10:00
Kenneth Privitt
76a1cb1710
Incorrect time_t TypeDef in RAK12035_SoilMoisture
2026-05-05 11:20:36 -07:00
Josiah VanderZee
102dbf536d
Do not perform redundant reset on ST7789 displays
...
The `::init` method in the Adafruit ST7789 library is responsible to
initialize the device. This includes performing a reset, which can be
found in the Adafruit source for `Adafruit_SPITFT`.
Before this change, MeshCore performed its own ST7789 display reset
sequence, which consisted of three steps.
* Pull reset low
* Wait 10ms
* Pull reset high
Importantly, there was no fixed delay after pulling reset high. The
ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode
and 120ms in Sleep Out Mode before it will properly receive commands.
When `Adafruit_SPITFT` resets the device after MeshCore has already
reset it, the mandatory time may not have elapsed, leading to strange
behavior. In the author's case, this issue caused the initial
`fillScreen` to fail, such that the display showed an uninitialized
framebuffer.
This removes the MeshCore delay, leaving the responsibility of reset to
`Adafruit_SPITFT`, where they have the correct delays in place with
extra safety margin. The change was briefly tested by Josiah VanderZee
and Ben Zignego on a custom hardware build using an nRF52840 Dongle and
an Adafruit 4311 TFT display. The user button seemed to behave
strangely, but the display looked correct.
2026-05-04 17:01:39 -05:00
Liam Cottle
093f2a68dc
Merge pull request #2462 from meshcore-dev/target-dup-cleanup
...
Refactor: removed duplicated target code
2026-05-02 17:21:51 +12:00
Nick Le Mouton
e7a7a0acd1
Add stddef.h
2026-05-02 17:12:03 +12:00
Liam Cottle
2974793192
Merge pull request #2460 from liamcottle/ui/startup-mute
...
Don't play startup tune if buzzer pref disabled
2026-05-02 02:24:37 +12:00
liamcottle
17dcdc1b2c
don't play startup tune if buzzer pref disabled
2026-05-02 01:47:35 +12:00
jirogit
9de04fe0da
fix: enable radio.rxgain CLI command for LR1110 (T1000-E)
...
USE_LR1110 was missing from the preprocessor guard in CommonCLI.cpp,
causing both get and set to fail silently on T1000-E:
- get radio.rxgain returned the full radio config string (fell through
to the memcmp("radio", 5) branch)
- set radio.rxgain returned "unknown config" (no branch matched)
Fix: add -D USE_LR1110 to variants/t1000-e/platformio.ini and include
USE_LR1110 in the #if guard on both get and set branches.
CustomLR1110Wrapper already implements setRxBoostedGainMode() and
getRxBoostedGainMode() via the RadioLibWrapper virtual interface,
so no radio-layer changes are required.
Tested on T1000-E: get/set/persist all confirmed working.
2026-05-01 00:31:31 -07:00
jirogit
6249cf6e25
fix(RegionMap): save() returns actual write success instead of hardcoded true
2026-05-01 00:06:46 -07:00
Scott Powell
8903b907d1
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
Liam Cottle
d6cedb4fa6
Merge pull request #925 from mtlynch/unit-tests
...
Add unit tests for Utils::toHex
2026-05-01 14:49:45 +12:00
Liam Cottle
6c28dedb26
Merge pull request #2456 from Avi0n/docs/fix-typos
...
fix typos in docs
2026-05-01 14:16:51 +12:00
Avi0n
bb93ff073c
fix typos
2026-04-30 14:21:26 -07:00
Liam Cottle
a6ea2bcfb9
Merge pull request #2428 from recrof/minewsemi-refactor
...
minewsemi: refactor platformio.ini
2026-05-01 00:56:32 +12:00
Rastislav Vysoky
8e1ac0bc3a
Merge branch 'dev' into minewsemi-refactor
2026-04-30 14:48:49 +02:00
Liam Cottle
59a6ee658e
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
Liam Cottle
4261526fb6
Merge pull request #1954 from OverkillFPV/lora-longer-preamble
...
Lora longer preamble
2026-04-30 22:12:04 +12:00
Liam Cottle
e897e35480
Merge pull request #2448 from weebl2000/bump-sensor-version
...
bump simple_sensor version to v1.15.0
2026-04-30 21:43:06 +12:00
Liam Cottle
de930ef0ad
Merge pull request #2430 from oltaco/use-forked-adafruit-nrf52
...
Use internal fork of Adafruit nRF52 Arduino
2026-04-30 21:42:24 +12:00
liamcottle
a294b127ab
add comments
2026-04-30 21:36:04 +12:00
Wessel Nieboer
308fded6ab
bump simple_sensor version to v1.15.0
2026-04-30 11:12:31 +02:00
Liam Cottle
bc7dd6e9ef
Merge pull request #2426 from recrof/nano-g2-rework
...
make g2 more in line with other variants
2026-04-30 16:57:58 +12:00
Liam Cottle
68c820e0b9
Merge pull request #2436 from chrisdavis2110/rak3401-comp-ana-button
...
feat: Add support for PIN_USER_BTN_ANA on rak3401 companion usb and companion ble envs
2026-04-30 16:57:00 +12:00
Kyle
d2be6bd285
docs: add explanatory notes for txdelay, direct.txdelay, and rxdelay CLI commands
2026-04-29 14:10:13 -04:00
Kyle
454991e34c
fix: enforce upper bounds for rxdelay, txdelay, and direct.txdelay in CLI
2026-04-29 13:26:26 -04:00
Liam Cottle
0dc9ff1682
Merge pull request #2439 from Quency-D/fix-lna
...
Heltec boards have LNA disabled by default.
2026-04-30 02:35:34 +12:00
Quency-D
feb46a6775
Heltec boards have LNA disabled by default.
2026-04-29 16:20:21 +08:00
chrisdavis2110
8c50063eb1
added PIN_GPS_EN=-1 to rak3401 companion usb
2026-04-28 21:59:10 -07:00
chrisdavis2110
ede17ac0b2
added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble
2026-04-28 21:26:56 -07:00
Rastislav Vysoky
0a2f6b1cd9
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
Rastislav Vysoky
3e77c74e61
standardize the minewsemi variant
2026-04-28 13:53:35 +02:00
taco
47e6f2e22c
use internal fork of Adafruit nRF52 Arduino
2026-04-28 21:46:14 +10:00
taco
f036f7d74c
revert bluefruit patch
...
in preparation to switch to using our own fork of Adafruit NRF52 Arduino with the patch included
2026-04-28 21:39:34 +10:00
Liam Cottle
fff204f65f
Merge pull request #2427 from recrof/tabs-to-spaces
...
replace all intendation tabs to spaces in pio ini files
2026-04-28 22:39:31 +12:00
Rastislav Vysoky
0ce4f52324
replace all intendation tabs to spaces in pio ini files
2026-04-28 12:37:30 +02:00
Rastislav Vysoky
f22991295e
make g2 more in line with other variants
2026-04-28 12:24:45 +02:00
ripplebiz
2b17911b79
Merge pull request #2424 from liamcottle/ui/website
...
Add MeshCore website to splash screen
2026-04-28 19:12:00 +10:00
liamcottle
5177ca76a2
added website to sensor splash screen
2026-04-28 20:40:13 +12:00
liamcottle
e85febb858
added website to room server splash screen
2026-04-28 20:39:07 +12:00
liamcottle
a63326c72c
added website to companion splash screen
2026-04-28 20:37:17 +12:00
liamcottle
738fe0d7a4
added website to repeater splash screen
2026-04-28 17:02:20 +12:00
ripplebiz
a4fd669156
Merge pull request #2388 from OhYou-0/lilygo-teth-elite-board-support
...
Add LilyGo T-ETH Elite SX1262 board support
2026-04-28 14:34:11 +10:00
ripplebiz
2e72d1c006
Merge pull request #2383 from IoTThinks/MCdev-Added-XiaoS3-202604
...
Added Xiao S3 variant
2026-04-28 14:23:42 +10:00
Liam Cottle
5afa9a1545
Merge pull request #2392 from zjs81/meshcore_open_data_types
...
Introduce DataType Definitions for Meshcore Open
2026-04-28 15:42:03 +12:00
Liam Cottle
8cb3e05d8e
Merge pull request #2401 from zevaryx/rak-3401-gps
...
feat: Enable GPS on RAK 1W kit
2026-04-28 13:57:55 +12:00
zjs81
043c950b70
Clarify path length semantics and data handling in inbound group datagrams
2026-04-27 10:49:55 -07:00
zjs81
25bb44e1d1
Refine data type definitions and update registration process in documentation
2026-04-27 10:22:17 -07:00
Quency-D
69c98fabda
Fix external watchdog timing around sleep
2026-04-27 15:32:02 +08:00
Quency-D
ef83591306
Merge pull request #10 from meshcore-dev/dev
...
merge Dev
2026-04-27 14:48:26 +08:00
Quency-D
4e4d564bb6
Change write to read for radio_fem_rxgain
2026-04-27 14:06:21 +08:00
Liam Cottle
c153945a73
Merge pull request #2413 from keithtweed/patch-1
...
Update script link in FAQ 4.7 to the repo of the fork
2026-04-27 14:17:19 +12:00
ripplebiz
2f07c23561
Merge pull request #2412 from LitBomb/patch-25
...
Removed links to outdated resources and links
2026-04-27 12:14:23 +10:00
Keith Tweed
fdac05d208
Update script link in FAQ 4.7
2026-04-26 19:51:33 -06:00
uncle lit
b834d88885
Removed links to outdated resources and links
...
Removed links to outdated resources and links
2026-04-26 18:35:02 -07:00
Ryan Gregg
76ad7b6731
Address PR review feedback from oltaco
...
- Remove extra blank line in companion_radio main.cpp before NRF52/STM32 block
- Revert unintended STM32_PLATFORM ETHERNET_ENABLED branch (no STM32 ethernet target exists, and it incorrectly included nrf52 headers)
- Drop renovate annotations from rak4631 platformio.ini (no renovate config in this repo)
2026-04-26 20:22:35 +00:00
Liam Cottle
6458b00ccc
Merge pull request #2407 from jirogit/fix/wireless-paper-device-model
...
fix: correct device model name for Heltec Wireless Paper
2026-04-26 21:33:06 +12:00
me
d759074d25
fix: correct device model name for Heltec Wireless Paper
2026-04-26 00:23:09 -07:00
Liam Cottle
77bf352962
add FUNDING.yml
2026-04-26 00:24:40 +12:00
Quency-D
65fc72014f
Restore WiFi operation command scope comments
2026-04-25 16:12:40 +08:00
Quency-D
2bd9fe7ae1
Remove unnecessary blank line in MyMesh.cpp
2026-04-25 16:10:57 +08:00
Huw Duddy
c76b32eb59
Merge pull request #2157 from aXistem-dev/fix/sensecap-solar-tx-led-12
...
fix(sensecap_solar): correct TX LED after remap & power-button pin changes
2026-04-25 18:03:53 +10:00
Quency-D and Copilot
4d233249fc
Revise according to the review comments.
...
Co-authored-by: Copilot <copilot@github.com >
2026-04-25 16:01:26 +08:00
Confi
ed78ff9212
fix(sensecap_solar): init LED_WHITE LOW to prevent always-on at boot
2026-04-25 09:47:44 +02:00
Quency-D
c50064dad2
Revert "Merge branch 'meshcore-dev:main' into cli-lna-command"
...
This reverts commit 31fd6462df , reversing
changes made to 9641f7b2a2 .
2026-04-25 15:33:59 +08:00
Quency-D
31fd6462df
Merge branch 'meshcore-dev:main' into cli-lna-command
2026-04-25 15:29:00 +08:00
Quency-D
9641f7b2a2
Merge branch 'dev' into cli-lna-command
2026-04-25 15:28:07 +08:00
zevaryx
6fe8ee1c5d
feat: Enable GPS on RAK 1W kit
2026-04-24 20:24:50 -06:00
Michael Lynch
802a53b7b0
Update googletest to use 1.17.0 exactly
...
With the '^x.y.z' semantics, the version can upgrade out from under us and change dependencies, so this pins to an exact version.
2026-04-24 16:17:23 -04:00
Michael Lynch
f6ecbef3da
Add unit tests for Utils::toHex
2026-04-24 19:37:21 +00:00
OhYou-0
c8daae6283
Add LilyGo T-ETH Elite board support
2026-04-24 10:16:19 -07:00
Liam Cottle
93e8421004
Merge pull request #2326 from IoTThinks/MCdev-Added-HeltecV4-Expansion-Kit-2026-04-16
...
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-25 00:14:12 +12:00
zjs81
7c0b509c52
Update companion protocol documentation and enhance data type definitions for clarity
2026-04-24 04:24:20 -07:00
Kevin Le
c336da0f3d
Added Xiao S3 variant.
...
This is for Xiao S3 and a normal Wio SX1262 for Xiao shield.
2026-04-24 11:56:06 +07:00
liamcottle
7ea1bbf5d5
update discord links
2026-04-24 15:57:34 +12:00
Frieder Schrempf
0d3d5ed619
Disable NRF52 undervoltage bootlock feature
...
The NRF52 undervoltage bootlock feature implemented behind
NRF52_POWER_MANAGEMENT was introduced in v1.12.
It configures a fixed voltage level of 3.3V and prevents the software
from booting if the battery voltage is below that level.
This is problematic for various reasons. The most important one being
that it breaks devices that use cell chemistries other than Li-Ion,
such as LFP, LTO or SIB which have much lower minimum voltages.
As a quick fix to prevent devices from failing, disable the feature
until it has been decided how to handle this in the future and a
proper implementation has been provided.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-04-22 19:56:57 +02:00
Liam Cottle
dca5565607
Merge pull request #2353 from jirogit/fix/techo-lite-non-shell-ble-clean
...
feat(techo-lite): add Non-Shell companion BLE variant
2026-04-22 20:25:32 +12:00
Liam Cottle
3ced41fe07
Merge pull request #2287 from pelgraine/fix/techo-lite-battery
...
Fixes #1183 — T-Echo Lite incorrect battery voltage
2026-04-22 20:23:21 +12:00
Liam Cottle
eeb8faf5aa
Merge pull request #2008 from weebl2000/p_lora_reset_rak4631
...
Fix RAK4631 SX1262 hardware pin config
2026-04-22 19:45:06 +12:00
Liam Cottle
1b187de58d
Merge pull request #2340 from weebl2000/fem-enabled-def
...
Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
2026-04-22 19:33:29 +12:00
Liam Cottle
c539e766a9
Merge pull request #2016 from weebl2000/add-lr1110-sx1276
...
Add sanity build for LR1110 and SX1276 too
2026-04-22 19:30:12 +12:00
Wessel Nieboer
f743ea8fe9
Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
...
Should only really be disabled when it causes issues.
2026-04-22 09:30:00 +02:00
Liam Cottle
f2f215f39b
Merge pull request #2371 from weebl2000/r1-neo-shutdown
...
Implement proper shutdown procedure for R1 neo
2026-04-22 19:22:46 +12:00
pelgraine
28feb3ca5d
Fixes #1183 — T-Echo Lite incorrect battery voltage
...
Battery (TechoBoard.h/cpp): Added PIN_VBAT_MEAS_EN (P0.31) — the T-Echo
Lite has a gated voltage divider that must be enabled before reading. Also
added pinMode(PIN_VBAT_READ, INPUT) before each ADC read to reclaim P0.02
from other peripherals. Pin definitions hardcoded from LilyGo's
t_echo_lite_config.h.
I2C (variant.h): Corrected SDA/SCL from P0.04/P0.02 to P1.04/P1.02 per
LilyGo's IIC_1_SDA/IIC_1_SCL. The old P0.02 mapping conflicted with the
battery ADC pin.
GPS (variant.h): Corrected all five GPS pin assignments to match LilyGo's
config — UART TX/RX, wake, PPS, and power enable were all scrambled.
SPI (variant.h): Fixed SPI_INTERFACES_COUNT from _PINNUM(0, 2) to (2).
Tested on T-Echo Lite Non-Shell (USB-C, no display). Battery readings match
Heltec V4 reference within 10mV.
2026-04-22 12:56:15 +10:00
Wessel Nieboer
6404575d7a
Implement proper shutdown procedure for R1 neo
...
fixes #2361
2026-04-21 21:29:18 +02:00
Liam Cottle
b723e62a97
Merge pull request #2335 from fizzyfuzzle/v4_adc_mult
...
Add Heltec V4 set adc.multiplier functionality
2026-04-21 18:06:42 +12:00
me
630961891d
feat(techo-lite): add Non-Shell (screenless) companion BLE variant
...
T-Echo Lite Non-Shell has no ePaper display, but the existing
companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base
env. This causes display.begin() to run on non-existent hardware,
corrupting BLE initialization and generating a random PIN that
cannot be displayed, making BLE connection impossible.
Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that:
- excludes DISPLAY_CLASS and ePaper-related build flags
- removes GxEPDDisplay.cpp and ui-new from build sources
- uses static BLE_PIN_CODE=123456 (avoids random PIN generation)
Also fix boards/t-echo.json:
- add nrfutil to upload protocols list
- add use_1200bps_touch=true and wait_for_upload_port=true
to enable reliable flashing via PlatformIO upload button
2026-04-20 21:08:08 -07:00
Scott Powell
74827892ff
* CommonCLI: more reply bounds checking
2026-04-21 12:12:47 +10:00
Scott Powell
e83e5c781b
* CommonCLI: bounds check added to "unknown config:" replies
2026-04-21 12:07:39 +10:00
Ryan Gregg
1fe2bb9068
Merge remote-tracking branch 'upstream/dev' into rak-ethernet
...
# Conflicts:
# docs/faq.md
2026-04-20 15:06:09 +00:00
Marco
bac05f985b
Add Heltec V4 set adc.multiplier
2026-04-19 15:29:43 +02:00
Confi
c2d95820af
fix(sensecap_solar): set P_LORA_TX_LED to 12 after LED remap
...
Align TX activity LED with LED_BLUE / variant.h after LED definition
and power-button pin mapping changes.
2026-04-19 11:20:28 +02:00
Scott Powell
a54cfa05a1
Merge branch 'dev'
...
# Conflicts:
# docs/faq.md
2026-04-19 11:35:03 +10:00
Scott Powell
f787cdf5fc
* version 1.15.0
2026-04-19 11:27:55 +10:00
Scott Powell
56405b0d71
* minor bounds fix
2026-04-18 21:32:41 +10:00
ripplebiz
d1e541ce3f
Merge pull request #2328 from recrof/xiao_c3-companion-fix
...
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 20:44:15 +10:00
Liam Cottle
cbb884eff9
Merge pull request #2306 from petrkr/otaupdate2
...
SDK3.x: Fix OTA includes, bump Async version
2026-04-18 19:56:56 +12:00
Rastislav Vysoky
2ad4d14bd4
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 09:42:27 +02:00
Liam Cottle
ae537a4aa3
Merge pull request #2103 from robekl/docs-radio-rxgain
...
docs: add radio.rxgain command reference
2026-04-18 19:05:43 +12:00
Liam Cottle
680212cb0c
Merge pull request #2315 from jirogit/fix/wireless-paper-companion-usb
...
feat: add USB Companion Radio env for Heltec Wireless Paper
2026-04-18 18:45:38 +12:00
Nick Dunklee
b9ee52fdf1
fix(sensors): improve sensor initialization and handling to prevent hangs and handle growth
...
This is a medium-ish refactor to attempt to clean up sensor handling logic both for board stability and future potential growth before the code becomes all spaghetti and meatballs.
I'd be curious to see if anyone running sensors out there that knows how to build and flash MeshCore code could give this a try and see how it behaves. It is working fine on my end on multiple nodes.
PR notes are gigantic because it is a fundamental behavior repair for sensors, so I wanted to over-explain. Also, if it hadn't been mentioned previously, push-back is always welcome. I'm just spending my time trying to clean up / fix / enhance this corner of the firmware, and want to contribute my improvements back to the project.
**Problem:**
Current MeshCore code makes no attempt to see what sensors are actually available on the I2C bus at startup and blindly tries to interact with sensors. This has some very bad side-effects, like if a sensor that is unsupported, or has a weird initialization process, the MeshCore node will just hang at boot and never successfully start up and ostensibly looks bricked, or the INA226 and SHT4X both sharing the same address and the code just silently fighting.
The current implementation also gloms sensor readouts from the MCU and environment sensors onto the same telemetry channel, with some arbitrary exceptions for incrementing channels based on certain behavioral situations. The MCU temperature and external temperature sensors would appear on channel 1, and it wouldn't be possible to tell which sensor the temperature value was coming from.
Per [CayenneLPP](https://github.com/myDevicesIoT/CayenneLPP ): *Data Channel: Uniquely identifies each sensor in the device across frames, eg. “indoor sensor”* So this channel division implementation falls inline with what CayenneLPP intended. There are up to 256 channels available. So I tried to model this change in that behavioral style.
**Proposed Improvement:**
This implementation scans the I2C bus for what devices are present, sets each sensor to its own CayenneLPP channel, and keeps MCU telemetry on channel 1 only. So Channel 1 is always "self" and no confusion can result.
Details:
- Channel 1 is always the MCU and things about it, so you always know that telemetry is from the board itself. Exception is GPS, GPS stays on channel 1 as well since it is "about the board" even though it's a bit gray-area as GPS can often be a secondary chip.
- Each sensor board is allocated to a dedicated CayenneLPP channel, so if you are reading from that channel, you know the data is from that sensor only. (Sensors emitting more than one of the same type of measurement are exceptions.)
- `scanI2CBus()` probes addresses 0x08–0x77 with raw `beginTransmission`/`endTransmission`. No sensor library is touched until after this completes. This will prevent sensor-based boot hangs, unknown or unresponsive devices never reach a library init call.
- Created `SENSOR_TABLE` a compile-time array that is gated by the existing `ENV_INCLUDE_*` macros. A sentinel `{ 0, nullptr, nullptr, nullptr }` at the end keeps the array non-empty regardless of which sensors are enabled, avoiding zero-length array warnings.
- When `begin()` is called, scan first, then loop: skip if address not detected, skip if `init()` returns 0, otherwise register one ActiveSensor entry per sub-channel.
- `querySensors()` I replaced the entire #ifdef chain with a 3-line loop.
- T1000-E has its own T1000SensorManager, so it should be completely unaffected by this change.
- SHT4X quirky initialization behavior is retained.
- MLX90614 - git commits around this didn't have any notes as to why it is reporting ambient temperature on a separate channel as well as the object temperature, as the ambient temperature is used internally to compute the object temperature and not really needed for the sensor's purpose - just the same, kept the existing behavior of reporting the ambient temperature one channel above the channel assigned to the sensor
- All `bool *_initialized` fields are gone, replaced with `ActiveSensor _active_sensors[16]` (query function pointer and sub-channel index) and `_active_sensor_count. SensorDef` lives entirely in the `.cpp` so the header has no dependency on it.
- Details on the INA226 and SHT4X: both default to address 0x44, the old code had a bug and would have both begin() calls fire and they would just fight each other silently. In the new code, the respective sensor code is only called if the device is actually present, however, if both were present simultaneously, SHT4X comes first in the table and would win, and INA226 would return false and be skipped. The INA226 has 16 possible addresses that are configurable in the hardware itself, so in a potential scenario where both sensors would be present, the person implementing that design could take that into account.
- BME680 gas resistance will now transmit on the same channel as the rest of BME680 telemetry which is inline with CayenneLPP standards. Coupling this PR with https://github.com/meshcore-dev/MeshCore/pull/2146 streamline the whole sensor telemetry, and with https://github.com/meshcore-dev/MeshCore/pull/2149 will overall improve BME680 handling. The gas resistance sensor actually has a binary library to make it more useful, calibration, accounting for age of sensor, and other improvements, but since that adds more flash consumption, I have omitted that in PRs thus far.
- RAK12035 and other current upstream dev branch changes integrated.
2026-04-17 22:23:21 -06:00
liamcottle
97f40e29f1
bleuart service stay registered first to prevent gatt cache issues on android when already paired
2026-04-18 14:43:47 +12:00
Kevin Le
4665a045e0
Added support for Expansion Kit to Heltec V4 OLED repeaters
2026-04-18 09:24:53 +07:00
Liam Cottle
d9c370c4fd
Merge pull request #2323 from txkbaldlaw/updated-companion-dfu-from-mt
...
Add support for Companion BLE OTA updates on nRF devices
2026-04-18 12:17:16 +12:00
txkbaldlaw
07077b5090
Additional Update to FAQs regarding Companion OTA
2026-04-17 16:17:12 -05:00
txkbaldlaw
15402a59dc
Update FAQ to include Companion OTA DFU updates
2026-04-17 10:56:51 -05:00
Scott Powell
4f40ffb305
Merge branch 'default-scope' into dev
2026-04-17 16:30:19 +10:00
Scott Powell
97f4a0d4c7
* CLI: 'region put ...' now defaults to flood allowed
2026-04-17 15:11:10 +10:00
Scott Powell
eaba6b0ae5
* CLI: 'region default ...' now auto-creates the region
2026-04-17 15:02:04 +10:00
Scott Powell
2b33c0d19a
* bug fix
2026-04-17 14:38:03 +10:00
Scott Powell
0a4ee5c1ea
* doco: "region default"
2026-04-17 13:49:57 +10:00
txkbaldlaw
474b60c2d5
Add DFU to BLE Stack
2026-04-16 16:04:30 -05:00
OverkillFPV
db254a0051
Merge branch 'dev' into lora-longer-preamble
2026-04-16 20:43:46 +10:00
Scott Powell
1e6eeb0d80
* Repeater, room server: rule change for sendFloodReply()
2026-04-16 13:22:39 +10:00
jirogit
9a54bd1467
feat: add USB Companion Radio env for Heltec Wireless Paper
2026-04-15 19:43:51 -07:00
Scott Powell
b932be6725
* companion: FIRMWARE_VER_CODE now bumped to 11
2026-04-15 20:47:17 +10:00
Scott Powell
375243b328
* bug fix
2026-04-15 15:44:22 +10:00
Scott Powell
03fca12415
* repeater: refactored 'region' CLI commands -> CommonCLI
...
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
2026-04-15 13:32:49 +10:00
Petr Kracik
16ba6a18af
Variants: Enable ElegantOTA on ESP32-C6 devices
2026-04-14 15:40:31 +02:00
Petr Kracik
5d9279af46
SDK3.x: Fix OTA includes, bump Async version
2026-04-14 15:28:11 +02:00
Scott Powell
fb128a771d
* repeater: default-scope support
2026-04-14 17:51:34 +10:00
Liam Cottle
97b2f94889
Merge pull request #2302 from recrof/patch-2
...
xiao nrf52 companion usb: Add OFFLINE_QUEUE_SIZE=256
2026-04-14 18:36:50 +12:00
Rastislav Vysoky
d45cb9251a
Add OFFLINE_QUEUE_SIZE=256 for xiao nrf52 companion usb
2026-04-13 21:09:56 +02:00
Huw Duddy
ff12425140
Merge pull request #2298 from TheMalkavien/fix/waveshare-rp2040-rx-sensitivity
...
Fixes #2294 : RX path not enabled on Waveshare RP2040
2026-04-14 01:36:26 +10:00
Scott Powell
6139b1985d
* companion: simplified the CMD_GET / CMD_SET _DEFAULT_FLOOD_SCOPE
2026-04-13 23:11:21 +10:00
Scott Powell
17fbce5f73
* companion: RegionMap now used in Datastore
...
* companion: new CMD_SET_DEFAULT_FLOOD_SCOPE
* support for regional builds with DEFAULT_REGION_SCOPE
2026-04-13 21:06:53 +10:00
Liam Cottle
24fb1ad847
Merge pull request #2072 from robekl/fix-t1000e-pin-comments
...
Fix T1000-E pin comments
2026-04-13 02:27:19 +12:00
Liam Cottle
3280b71c01
Merge pull request #2102 from robekl/docs-gps-output-format
...
docs: align gps output description with CLI
2026-04-13 01:51:51 +12:00
Liam Cottle
baf4646f6b
Merge pull request #1833 from olanwe/set-wifi-offline-queue-sizes
...
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion environments
2026-04-13 01:41:07 +12:00
liamcottle
36bc25d0a4
fix compilation error in wifi variants due to not enough ram
2026-04-13 01:03:32 +12:00
Malkavien
7d15a3f636
fix(waveshare-rp2040): add SX126X_RXEN=17 to restore RX sensitivity
...
The Waveshare RP2040-LoRa board has an RF switch with two complementary
control lines:
- DIO2 (CTRL) -- driven automatically by the SX1262 chip: HIGH on TX,
LOW on RX
- GPIO17 (!CTRL) -- was not configured in MeshCore, so it floated and
the switch never properly selected the LNA/RX path
Without this pin driven, the RF switch never switches to RX mode,
resulting in completely degraded reception. TX was unaffected because
DIO2 alone is sufficient to activate the TX path.
Adding SX126X_RXEN=17 lets RadioLib drive GPIO17 as the complement of
DIO2, so the switch correctly routes the signal to the LNA on receive.
Reference: https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf
2026-04-12 14:49:42 +02:00
Scott Powell
ca696e434a
* RegionMap: new 'default' region
2026-04-12 22:06:10 +10:00
Liam Cottle
696273badb
Merge pull request #1612 from weebl2000/default-button-low
...
Default button polarity to active-LOW across all firmware types
2026-04-12 23:30:28 +12:00
Liam Cottle
111dbcb91f
Merge pull request #2075 from pcmoore/working-ina3221
...
RFE: allow for INA3221 macro overrides in platform.io files
2026-04-12 22:49:17 +12:00
Liam Cottle
d5a566439d
Merge pull request #1425 from thomasabbott/tcxo_voltage_fix_rp2040
...
RP2040 Update SX126X_DIO3_TCXO_VOLTAGE to 1.8 V
2026-04-12 22:45:00 +12:00
Liam Cottle
dbef22f651
Merge pull request #2164 from Snayler/dev
...
Fix Heltec Wireless Paper battery reading
2026-04-12 21:17:42 +12:00
Snayler
8a5cf53ab5
Merge branch 'meshcore-dev:dev' into dev
2026-04-10 18:31:52 +01:00
Scott Powell
750ec23916
* Companion: default scope
2026-04-10 17:01:41 +10:00
Liam Cottle
4a719ff154
Merge pull request #2176 from jschrempp/patch-1
...
Update RAK 4631 entry in FAQ on new bootloader - removed "see note"
2026-04-09 01:47:50 +12:00
Liam Cottle
33bcf275c9
Merge pull request #2263 from jirogit/fix/thinknode-m5-wifi-credentials
...
fix: remove real WiFi credentials from ThinkNode M5 variant
2026-04-06 21:23:40 +12:00
me
138a2beb63
fix: remove real WiFi credentials from ThinkNode M5 variant
...
variants/thinknode_m5/platformio.ini contained actual WiFi SSID and
password credentials (Livebox-633C) committed by mistake. Replaced
with placeholder values consistent with other variants (myssid/mypwd).
2026-04-05 22:50:59 -07:00
liamcottle
806e62e07e
update faq
2026-04-05 22:04:36 +12:00
Wessel Nieboer
39b0f400bc
Fix T1000E press=high
2026-04-04 13:19:13 +02:00
Wessel Nieboer
f7fec7cfd9
Default button polarity to active-LOW across all firmware types
...
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
Wessel Nieboer
f9bca39781
Fix RAK4631 SX1262 hardware pin config
2026-04-04 13:18:17 +02:00
Wessel Nieboer
2e20f51b65
Add sanity build for LR1110 and SX1276 too
2026-04-04 13:18:15 +02:00
Andy Shinn
f660339e44
Allows us to have custom PlatformIO envs and configs ( #2234 )
2026-04-04 17:34:29 +13:00
Liam Cottle
43a48f282c
Merge pull request #2244 from jirogit/fix/generic-espnow-advert-name
...
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
2026-04-04 17:24:50 +13:00
Liam Cottle
7585740701
Merge pull request #2243 from jirogit/fix/thinknode-m5-advert-name
...
fix: correct ADVERT_NAME for ThinkNode M5 (was M2)
2026-04-04 17:23:44 +13:00
jirogit
1966089e2a
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
...
env:Generic_ESPNOW_room_svr was using 'Heltec Room' as ADVERT_NAME,
causing Generic ESPNow room server nodes to advertise with the wrong
device name on the mesh.
2026-04-03 19:08:15 -07:00
jirogit
acb9c59b77
fix: correct ADVERT_NAME for ThinkNode M5 (was M2)
...
Repeater and Room Server environments in variants/thinknode_m5/platformio.ini
were using 'Thinknode M2' as the ADVERT_NAME, causing M5 nodes to advertise
with the wrong device name on the mesh.
- env:ThinkNode_M5_Repeater: 'Thinknode M2 Repeater' -> 'Thinknode M5 Repeater'
- env:ThinkNode_M5_room_server: 'Thinknode M2 Room Server' -> 'Thinknode M5 Room Server'
2026-04-03 18:55:39 -07:00
KPrivitt
fd56ce6807
Added RAK12035 Soil Moisture and Temperature Sensor ( #2223 )
2026-04-03 22:54:24 +13:00
liamcottle
7786d23973
update readme links
2026-04-03 17:07:02 +13:00
liamcottle
f5f904fd8b
update neighbor.remove docs
2026-04-02 23:24:39 +13:00
ripplebiz
15c32ca43b
Merge pull request #2227 from Quency-D/fix-BME680
...
Fixed the initialization error of the BME680 sensor.
2026-04-02 15:51:26 +11:00
Liam Cottle
332c1474b8
Merge pull request #2228 from liamcottle/refactor/gat562-mesh-watch
...
Refactor GAT562 Mesh Watch
2026-04-02 17:19:12 +13:00
Quency-D
31049cfa9b
Fixed the initialization error of the BME680 sensor.
2026-04-02 10:24:17 +08:00
Liam Cottle
60dc018182
Merge pull request #2007 from khudson/r1neo
...
Muzi Works R1 Neo support
2026-04-02 00:36:44 +13:00
Liam Cottle and Wessel
28bea96880
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-04-02 00:27:58 +13:00
Liam Cottle and Wessel
685e7fdc82
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-04-02 00:23:52 +13:00
Liam Cottle
a3bc0c681c
Merge pull request #2172 from LitBomb/patch-24
...
add multibyte FAQ, reference awesome-meshcore community projects, minor changes
2026-04-01 22:16:02 +13:00
liamcottle
335e0e75e4
double press top button to go back on gat562 mesh watch
2026-04-01 21:51:32 +13:00
liamcottle
3a30c49a20
use top button to wake hibernated gat562 mesh watch
2026-04-01 21:50:33 +13:00
uncle lit
43de8c3a7c
fixed typos and refined multibyte sections.
...
fixed typos and refined multibyte sections.
2026-03-31 12:22:11 -07:00
Liam Cottle
d65c857818
Merge pull request #2138 from MGJ520/dev_GAT562_Mesh_Watch13
...
Support for GAT562 Mesh Watch13 device
2026-03-31 21:54:38 +13:00
Liam Cottle
106c7ed565
Merge pull request #2202 from terminalvelocity23/fix/discover-neighbors-public
...
Move sendNodeDiscoverReq() from private to public to enable post-boot neighbor discovery
2026-03-31 21:27:27 +13:00
ripplebiz
a368fb2179
Merge pull request #2190 from brianwiddas/espnow-missing-methods
...
Add missing methods in ESPNOWRadio()
2026-03-31 15:24:27 +11:00
terminalvelocity23
76e2752b6a
Make sendNodeDiscoverReq() public for post-boot discovery
2026-03-30 22:35:05 +03:00
liamcottle
b875047437
update docs logo
2026-03-31 00:51:15 +13:00
Brian Widdas
bfc051d38e
Add missing methods in ESPNOWRadio()
...
ESP-NOW radios (ie, Generic_ESPNOW_* variants) do not compile due to
missing methods
Changes in January 2026 (62ec1b5f ) to add additional stats (receive errors)
to CMD_GET_STATS was not implemented in the ESPNOWRadio() class
Changes in March 2026 (2e52efb2 ) to add setRxBoostedGainMode to all devices
rather than just SX1262/SX1268 were not applied to the ESPNowRadio() driver
Specifically, this change adds the following to ESPNOWRadio()
* getPacketsRecvErrors() - always returns 0
* getRxBoostedGainMode() - always returns false
* setRxBoostedGainMode() - does nothing
2026-03-30 04:25:08 +01:00
ripplebiz
f4a6f9034e
Merge pull request #1982 from weebl2000/radiolib7.6.0
...
Bump RadioLib to 7.6.0
2026-03-30 14:02:08 +11:00
Scott Powell
66209a306e
* more notes about number_allocations
2026-03-30 13:53:16 +11:00
Scott Powell
b59ace29c6
* number_allocations.md data-type range changes
2026-03-30 11:53:27 +11:00
uncle lit
a09392ef60
Fix TOC insertion by Markdown All in One VS Code extension
...
Fixed an extra TOC jump link inserted by VSCode Markdown All in One VS Code extension.
2026-03-29 16:22:41 -07:00
overkillfpv
78cc18f919
changed to set the preamble on radio settings change
2026-03-29 21:45:16 +11:00
Scott Powell
e75644f7d6
* docs changes for PAYLOAD_TYPE_GRP_DATA
2026-03-29 06:33:35 +11:00
Jim Schrempp
df7e262da1
Update RAK 4631 entry in FAQ on new bootloader
...
Removed "see note" from RAK 4631 entry in FAQ.
2026-03-27 15:51:36 -07:00
uncle lit
134dbe4601
add multibyte FAQ, reference awesome-meshcore community projects, minor changes
...
- Add multi byte FAQ
- Reword amped radio output setting numbers
- Clarify repeater ID collision including distance, supercede https://github.com/meshcore-dev/MeshCore/pull/1478
- Reference awesome meshcore for community projects. Supercede https://github.com/meshcore-dev/MeshCore/pull/1893
2026-03-27 11:39:29 -07:00
Snayler
47d16beecd
Fix formatting of ADC_MULTIPLIER definition
2026-03-27 01:23:04 +00:00
Snayler
acafc639d3
Add correct ADC_MULTIPLIER definition to Heltec Wireless Paper
2026-03-27 01:19:46 +00:00
Snayler
065842668f
Define ADC_MULTIPLIER for adjustable ADC calculation
2026-03-27 01:17:39 +00:00
MGJ
bddf9bd95b
Reduce unnecessary compilation time
2026-03-26 16:32:00 +08:00
ripplebiz
61abdfc7a1
Merge pull request #1961 from weebl2000/dutycycle-command
...
Add get/set dutycycle command
2026-03-26 11:54:41 +11:00
fdlamotte
d0c246dae9
Merge pull request #2121 from archef2000/patch-1
...
Fix typo for ThinkNode M5 room server environment
2026-03-25 16:03:09 -04:00
Scott Powell
2b3391b9d9
* Companion: applyGPSPrefs() now just in one place (moved out of UITask)
2026-03-25 16:26:51 +11:00
Liam Cottle
ee378373be
Merge pull request #2018 from got-root/fix/companion-radio-gps-persistence
...
fix(companion_radio): apply persisted GPS enabled setting on boot for ui-orig devices
2026-03-25 09:38:03 +13:00
Alejandro Ramirez
166a34b30a
fix: apply persisted GPS enabled setting on boot for companion radio
...
The companion_radio example was not restoring the GPS enabled/disabled
preference from flash after reboot. The preference was being saved
correctly when toggled via the mobile app, but on boot,
sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false
and nothing subsequently restored the persisted state.
Added applyGpsPrefs() (matching the pattern in simple_repeater,
simple_sensor, and simple_room_server) and call it from main.cpp
after sensors.begin() to ensure the GPS hardware is initialized
before the saved preference is applied.
2026-03-24 09:10:09 -05:00
Quency-D
8c58ae625f
Adapt LNA CLI control commands for heltec_t096.
2026-03-24 16:13:13 +08:00
Quency-D
9d00465b3d
Adapt LNA CLI control commands for heltec_tracker_v2.
2026-03-24 16:05:28 +08:00
MGJ
a2905f48d8
Support for GAT562 Mesh Watch13 device
2026-03-24 14:16:48 +08:00
Quency-D
50fd11227a
Fix the memory leak issue in the strdup function.
2026-03-24 13:57:11 +08:00
overkillfpv
0494cf1e24
added the preamble update into get est airtime as a prevention for false airtime calcs. Left update in the startsendraw as a safety, but should not be used under normal circumstances
2026-03-24 15:05:15 +11:00
Quency-D
1cc1b7fa58
Add v4 FEM LNA CLI control commands.
2026-03-24 10:48:15 +08:00
Liam Cottle
0d5653d997
Merge pull request #2135 from liamcottle/docs/update
...
Update Docs URL
2026-03-24 15:39:51 +13:00
liamcottle
c2290bab55
update docs cname
2026-03-24 15:38:15 +13:00
Wessel Nieboer
9f9a1701c7
Merge branch 'dutycycle-command' of github.com:weebl2000/MeshCore into dutycycle-command
2026-03-24 03:08:54 +01:00
Wessel Nieboer
0814181792
restore docs
2026-03-24 03:08:18 +01:00
Liam Cottle
38669c83d8
Merge pull request #2134 from jeroenvermeulen/station-g2-default-radio-rxgain
...
Fix default radio.rxgain for Station G2
2026-03-24 14:11:08 +13:00
Jeroen Vermeulen
893069e7e4
Fix default radio.rxgain for Station G2
...
As @LitBomb pointed out in his [comment](https://github.com/meshcore-dev/MeshCore/issues/2118#issuecomment-4108168109 ) on #2118 RX Boosted Gain should not be enabled for the Station G2.
This change is a fix for #2124 to make the default of `radio.rxgain` to be OFF on the Station G2.
This restores the pre-1.14.1 behaviour with the only change being the user is now able to change the setting in the CLI.
2026-03-23 23:06:42 +01:00
Wessel Nieboer
ec0236fb7e
Address comments
2026-03-23 14:31:08 +01:00
Wessel Nieboer and ViezeVingertjes
781a9f7a79
Fix memcp compare length off by one
...
Co-authored-by: ViezeVingertjes <michael.overhorst@gmail.com >
2026-03-23 14:31:08 +01:00
Wessel Nieboer
726d1a4858
Add get/set dutycycle command
...
We translate to af internally, it's easier to store and doesn't break
stored prefs. Made get/set af command show deprecated, but it still
works fine.
2026-03-23 14:31:07 +01:00
Wessel Nieboer
2f93484054
Bump to RadioLib 7.6.0
2026-03-23 14:26:56 +01:00
ripplebiz
aaf02ae97b
Merge pull request #2130 from liamcottle/refactor/channel-data
...
Adjustments to PR #1928 - Custom Group Data
2026-03-23 22:13:34 +11:00
liamcottle
f7cd7cf6bd
add define for reserved group data type
2026-03-23 23:09:35 +13:00
liamcottle
c0d3c306b9
reorder command args
2026-03-23 23:02:24 +13:00
liamcottle
afae6cf7ec
add support for direct paths when sending group data
2026-03-23 21:46:21 +13:00
Liam Cottle
929ae65390
Merge pull request #1928 from dz0ny/feat/grp-data-upstream
...
feat: Add support for PAYLOAD_TYPE_GRP_DATA
2026-03-23 21:41:51 +13:00
Liam Cottle
953a2303f1
Merge pull request #2106 from jeroenvermeulen/document-radio.rxgain
...
Documented get/set radio.rxgain + discover.neighbors
2026-03-23 12:21:40 +13:00
Jeroen Vermeulen
066a85e31a
Add discover.neighbors command documentation
2026-03-22 21:35:02 +01:00
Jeroen Vermeulen
a209fc1e03
Merge pull request #1 from meshcore-dev/dev
...
Update from Main repo's dev
2026-03-22 21:26:47 +01:00
Jeroen Vermeulen
7ef1f52300
Update temporary note with a hyperlink to issue #2118
2026-03-22 21:19:06 +01:00
Jeroen Vermeulen
9bf5e2a367
Update note for upgrade to version 1.14.1
...
Clarify note regarding upgrade from older version.
2026-03-22 21:18:14 +01:00
Liam Cottle
d68cf1efdd
Merge pull request #2126 from recrof/allow-lower-freq
...
Allow to set lower LoRa frequency
2026-03-23 02:04:19 +13:00
Rastislav Vysoky
2ae9ef59a6
allow to set lower LoRa frequency
2026-03-22 13:54:42 +01:00
Liam Cottle
f9eb114fd8
Merge pull request #2109 from jbrazio/2026/from-bun-to-node
...
Update devcontainer features to use Node instead of Bun
2026-03-23 01:13:16 +13:00
ripplebiz
da5876abf6
Merge pull request #2124 from weebl2000/fix-radio-rxgain-true-by-def
...
Make radio.rxgain true by default after upgrades
2026-03-22 19:46:11 +11:00
Wessel Nieboer
cf9c2f1a0a
Make radio.rxgain true by default after upgrades
2026-03-22 08:35:32 +01:00
Ryan Gregg
fa2648ef97
bug fix: ethernet cli dropping connection after each command
2026-03-21 19:28:44 -07:00
Liam Cottle
b8584a3129
Merge pull request #2042 from whywilson/dev
...
Add GAT562 Mesh EVB Pro Repeater and Room Server
2026-03-22 13:57:30 +13:00
Konstantin
cd7371d54d
Fix typo for ThinkNode M5 room server environment
2026-03-21 23:09:28 +01:00
whywilson
2b30b77622
Remove useless define in GAT562_Mesh_EVB_Pro.
2026-03-21 20:45:29 +08:00
João Brázio
6927c439c2
fix: update devcontainer features to use node instead of bun
2026-03-21 11:47:22 +00:00
Ryan Gregg
83779fb197
Fix POE boot failure on RAK4631 Ethernet builds
...
Drive WB_IO2 (slot power switch) HIGH via early constructor before the
Arduino framework initializes. Without this, the board brownouts on
POE-only power because the slot MOSFET isn't enabled early enough for
the RAK13800 POE module to deliver power to the baseboard.
Also remove the W5100S hardware reset pulse from Ethernet init — the
chip comes out of power-on reset cleanly, and toggling reset kills
the PHY link which breaks POE power delivery.
2026-03-20 17:56:04 -07:00
Jeroen Vermeulen
be3edfd8eb
Update note about setting when upgrading
...
Clarified note regarding default setting for upgrades from older versions.
See https://github.com/meshcore-dev/MeshCore/pull/1653#issuecomment-4101341378
2026-03-20 23:54:48 +01:00
Jeroen Vermeulen
97e6d9843e
Documented get/set radio.rxgain CLI command
...
Added documentation for RX Boosted Gain Mode commands.
2026-03-20 22:46:53 +01:00
Robert Ekl
057588ca92
docs: add radio.rxgain command reference
2026-03-20 12:30:51 -05:00
Robert Ekl
542ef38096
docs: align gps output description with CLI
2026-03-20 12:29:48 -05:00
ripplebiz
7e3800aee3
Merge pull request #1867 from Quency-D/dev-heltec-v4.3
...
add heltec v4.3 board
2026-03-20 20:54:51 +11:00
Liam Cottle
4e0ec70fd6
Merge pull request #2097 from Quency-D/heltec-t096
...
add heltec_mesh_node_t096 board.
2026-03-20 22:25:12 +13:00
Quency-D
5adcc9c6f0
add heltec_mesh_node_t096 board.
2026-03-20 15:56:09 +08:00
Paul Moore
7eb1ae6b21
EnvironmentSensorManager: allow for INA3221 macro overrides
...
Allow for platformio.ini files to override the default values for the
following INA3221 related macros:
TELEM_INA3221_ADDRESS
TELEM_INA3221_SHUNT_VALUE
TELEM_INA3221_NUM_CHANNELS
Signed-off-by: Paul Moore <paul@paul-moore.com >
2026-03-19 21:55:13 -04:00
Scott Powell
03c44fb125
* version 1.14.1
2026-03-20 12:32:41 +11:00
ripplebiz
5876afb217
Merge pull request #2048 from j0uni/airtime-docs
...
Airtime (af) documentation update
2026-03-20 11:59:07 +11:00
ripplebiz
dba2cac0da
Merge pull request #2076 from robekl/docs/fix-path-length-encoding
...
docs: clarify path_length hash-size encoding
2026-03-20 10:31:19 +11:00
Scott Powell
7315eb4ef5
* markdown changes
2026-03-20 10:23:51 +11:00
Janez T
3bc61eb769
fix: Rename grp dev type
...
ref: #1928
2026-03-19 09:35:02 +01:00
Janez T
692f95e955
fix: Widen grp data type
...
ref: #1928
2026-03-19 09:25:42 +01:00
Janez T
9008c729a7
fix: Drop grp data timestamp
...
ref: #1928
2026-03-19 09:22:12 +01:00
Wessel Nieboer
aa077150e0
Address comments
2026-03-18 22:09:24 +01:00
Janez T
fa7b999bff
fix: Trim grp docs
...
ref: #1928
2026-03-18 20:34:15 +01:00
Janez T
b1b313f44f
fix: Keep data docs only
...
ref: #1928
2026-03-18 20:32:47 +01:00
Janez T
e384149abf
fix: Scope group data docs
...
ref: #1928
2026-03-18 20:29:49 +01:00
Janez T
05e5b40dd7
fix: Align channel data framing
...
ref: #1928
2026-03-18 20:14:22 +01:00
Janez T
bb5d8715b0
fix: address comments
...
ref:
2026-03-18 20:09:11 +01:00
Janez T
a38ed3d5cb
feat: Require 0xFF for custom payloads
...
ref:
2026-03-18 20:08:52 +01:00
Janez T
f0fff51987
feat: Add support for PAYLOAD_TYPE_GRP_DATA
...
Docs changes are to reflect how it is currently in fw
This adds ability to send datagram data to everyone in channel
2026-03-18 20:08:52 +01:00
Robert Ekl
73d4316b6f
docs: clarify path length encoding
2026-03-17 12:55:18 -05:00
Robert Ekl
65b03c2c0a
Fix T1000-E pin comments
2026-03-17 09:00:06 -05:00
whywilson
e37e1de5de
Update GAT562_Mesh_EVB_Pro Config and remove LoRa Specification and change Repeater name.
2026-03-17 19:46:39 +08:00
Robert Ekl
7c9a74cb06
Fix T1000-E sensor power pin mapping
2026-03-17 00:50:19 -05:00
Liam Cottle
99d1494438
Merge pull request #2052 from Orum/dev
...
Add MCU temperature to telemetry responses from room servers.
2026-03-17 12:03:55 +13:00
Orum
894c6c13a1
Add MCU temperature to telemetry responses from room servers.
2026-03-16 17:34:16 -05:00
Jouni
026b8201f4
Airtime (af) documentation update
2026-03-16 16:26:55 +02:00
Liam Cottle
bccb93e626
Merge pull request #1653 from jbrazio/2026/remote-lna
...
Implement remote LNA toggle CLI command
2026-03-17 02:22:51 +13:00
João Brázio
21ea7b5321
Merge pull request #2 from weebl2000/2026/remote-lna
...
Make sure LR1110 builds
2026-03-16 09:55:00 +00:00
João Brázio
569bdeb083
Merge branch 'dev' into 2026/remote-lna
2026-03-16 09:40:10 +00:00
João Brázio
4bd027c79b
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-16 09:37:55 +00:00
João Brázio
861b5cfcb9
Add USE_SX1262 flag to multiple platformio.ini configurations
2026-03-16 09:34:12 +00:00
whywilson
5cecbd70df
Merge branch 'dev' of https://github.com/meshcore-dev/MeshCore into dev
2026-03-16 14:53:44 +08:00
ripplebiz
62c17bd377
Merge pull request #1964 from EtoOnAmill/main
...
Removed section for isolated `get bridge.source`
2026-03-16 14:39:26 +11:00
ripplebiz
e674661642
Merge pull request #1984 from samschlegel/samschlegel/rak3401-power-management
...
Add nrf52 power management for RAK3401
2026-03-16 14:37:03 +11:00
ripplebiz
76e4f66e79
Merge pull request #2009 from MGJ520/dev
...
Support for GAT562 30S Mesh Kit device and fix other minor issues
2026-03-16 14:14:00 +11:00
ripplebiz
ec6c4b375f
Merge pull request #2023 from nextgens/fix_pio_upload
...
fix pio upload
2026-03-16 14:00:55 +11:00
Scott Powell
76a116b39a
* Repeater and Room Server: flood advert timer now uses the path_hash_mode pref
2026-03-16 13:56:19 +11:00
ripplebiz
6d277fa51a
Merge pull request #2037 from weebl2000/fix-heltec-E213-E290-eink
...
Fix Heltec E213 and E290 e-ink board builds
2026-03-16 13:46:05 +11:00
Wessel Nieboer
0f29b84cc5
Set AUTO_OFF_MILLIS to 0 for E213, E290
2026-03-15 15:51:31 +01:00
Wessel Nieboer
5ffb44d867
Fix Heltec E213 and E290 e-ink board builds
2026-03-15 15:51:25 +01:00
Liam Cottle
5c4968db6a
Merge pull request #2026 from sybrenstuvel/sybren/dev-fix-sensecap-solar-led-green
...
Sybren/dev fix sensecap solar led green
2026-03-15 11:36:21 +13:00
Sybren A. Stüvel
5350ff908b
SenseCap Solar: fix use of LED_GREEN
...
55cde28704 changed LED_RED/GREEN to
LED_WHITE/BLUE, but didn't convert all uses of LED_GREEN.
2026-03-14 21:52:08 +01:00
Florent Daigniere
108960f7c2
fix build
2026-03-14 18:54:27 +01:00
Ryan Gregg and Claude Opus 4.6
26c576b014
Merge upstream/dev into rak-ethernet
...
Resolve conflicts: keep both Ethernet CLI and SenseCAP power-off
button code in repeater, keep both Ethernet docs and power management
CLI docs.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-13 11:07:09 -07:00
Ryan Gregg and Claude Opus 4.6
2afeb07beb
Fix Ethernet init checking hardwareStatus before begin() and deduplicate CLI code
...
The Ethernet retry loop in repeater and room server checked
hardwareStatus() and linkStatus() before calling Ethernet.begin(),
which always returned EthernetNoHardware since hardware detection
only happens during begin(). Extract shared Ethernet CLI code into
EthernetCLI.h to prevent future divergence. Also fix time_t type
mismatch in companion radio Ethernet init.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-13 10:48:42 -07:00
Wessel Nieboer
6d07c7af79
Make sure LR1110 builds
2026-03-13 13:48:36 +01:00
Liam Cottle
ea51efeb9b
Merge pull request #1999 from weebl2000/also-sanity-build-main-dev
...
Have the github workflow sanity check also run against main and dev
2026-03-13 19:27:46 +13:00
whywilson
fcf2240ec0
Add GAT562 Mesh EVB Pro Repeater and Room Server.
2026-03-13 13:28:15 +08:00
MGJ
04083c7772
Merge branch 'meshcore-dev:dev' into dev
2026-03-12 18:20:19 +08:00
MGJ
8a9b2ae929
Support for GAT562 30S Mesh Kit device
2026-03-12 18:19:53 +08:00
MGJ
5a76e937b6
Fix incorrect comments
2026-03-12 18:18:10 +08:00
MGJ
63088f7f41
Remove GAT562 Mesh Tracker Pro device radio preset
2026-03-12 18:02:46 +08:00
Scott Powell
09bba14d96
Merge branch 'main' into dev
2026-03-12 18:14:56 +11:00
ripplebiz
abee981012
Merge pull request #1873 from Specter242/codex/sensecap-solar-led-poweroff-parity
...
sensecap solar: add poweroff/shutdown support and nrf52 PM parity
2026-03-12 18:13:14 +11:00
kelsey hudson
fcfb0e2b98
R1 Neo: Turn off debugging, rtc cleanup
2026-03-11 18:24:01 -07:00
Ryan Gregg and Claude Sonnet 4.6
062be045f3
Address PR review feedback from liamcottle (second round)
...
- Rename eth command to eth.status for consistency with other commands
- Rename generateDeviceMac to generateEthernetMac for clarity
- Refactor ethernet_handle_command to return false by default
- Allow new TCP clients to replace existing connections (repeater, room server, SerialEthernetInterface)
- Boot companion radio without Ethernet on init failure (LoRa-only recovery mode)
- Remove > prompt from ethernet CLI for consistency with serial interface
- Fix variable redeclaration compile error in SerialEthernetInterface when ETHERNET_STATIC_IP is defined
- Fix TCP socket leak when duplicate client detection fires
- Remove dead recv_queue and adv_restart_time members from SerialEthernetInterface
- Fix port numbers in docs (port 23 for repeater/room server CLI, port 5000 for companion radio)
- Clarify eth.status command is only available in repeater and room server firmware
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com >
2026-03-11 12:43:08 -07:00
Wessel Nieboer and ViezeVingertjes
ea8503841b
Fix memcp compare length off by one
...
Co-authored-by: ViezeVingertjes <michael.overhorst@gmail.com >
2026-03-11 20:08:47 +01:00
Wessel Nieboer
e68628f471
Have our github PR sanity check also run against main and dev for every merge
...
This will pick up any easy to spot build failures on dev/main
2026-03-11 16:51:09 +01:00
Liam Cottle
c3a004512f
Merge pull request #1991 from weebl2000/prevent-auto-restart-ble-nrf52
...
Prevent auto-restarting BLE when disabling it on nRF52
2026-03-11 22:05:25 +13:00
Liam Cottle
0463e8c032
Merge pull request #1483 from ssp97/dev
...
fix: avoid redundant redefinition of SX126X_DIO3_TCXO_VOLTAGE
2026-03-11 21:49:31 +13:00
Ryan Gregg
359832ab5b
Updates based on PR review feedback from liamcottle
2026-03-10 22:35:31 -07:00
Liam Cottle
7633e8a880
Merge pull request #1977 from robekl/docs/implementation-sync-release
...
Update docs to align with implementation
2026-03-11 18:09:16 +13:00
Ryan Gregg and Claude Opus 4.6
ac8ec82478
Add Ethernet documentation for RAK4631 ETH support
...
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-10 20:58:34 -07:00
Ryan Gregg and Claude Opus 4.6
7dcdecbd4c
Address PR review feedback for Ethernet support
...
- Add #pragma once to SerialEthernetInterface.h
- Rename TCP_PORT to ETH_TCP_PORT with #ifndef guard
- Fix typos: "initalizing" → "initializing"
- Fix #elif without condition → #else for STM32 block
- Replace infinite loop on ETH init failure with halt()
- Remove heartbeat Serial.print(".") output
- Remove dead beginETH() call (ETH_ENABLED, not RAK_ETH_ENABLE)
- Comment out MESH_DEBUG and ETH_DEBUG_LOGGING build flags
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-10 20:43:59 -07:00
Ryan Gregg and Claude Opus 4.6
d0d415d5f6
Add native Ethernet support for RAK4631 repeater, room server, and companion
...
Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling
TCP CLI access on port 23 as an alternative to BLE/Serial connections.
- New SerialEthernetInterface for nRF52 with DHCP, reconnection handling,
and shared WB_IO2 power pin management with GPS module
- Ethernet build targets for repeater, room server, and companion firmware
- Prevent GPS from toggling WB_IO2 when Ethernet module is active
- CI build check for all three ETH firmware targets
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-10 20:43:59 -07:00
Robert Ekl
503f270b75
set prv.key doc update
2026-03-10 22:12:55 -05:00
Liam Cottle
32f29baf6b
Merge pull request #1845 from lincomatic/repeaterbaud
...
don't limit bridge_baud to 115200
2026-03-11 11:51:00 +13:00
Wessel Nieboer
6047d6a615
Prevent auto-restarting BLE when disabling it on nRF52
...
If client is still connected, client would automatically reconnect
immediately thus keeping BLE on
fixes #1933
2026-03-10 14:31:58 +01:00
Sam Schlegel
366e7947a9
Add nrf52 power management for RAK3401
2026-03-09 20:49:29 -07:00
ripplebiz
be497b0bf6
Merge pull request #1952 from AI7NC/patch-1
...
Update cli_commands.md to include path.hash.mode and loop.detect
2026-03-10 13:19:39 +11:00
Wessel Nieboer
3d792e7bb1
Add get/set dutycycle command
...
We translate to af internally, it's easier to store and doesn't break
stored prefs. Made get/set af command show deprecated, but it still
works fine.
2026-03-09 13:43:17 +01:00
Liam Cottle
38d41112de
Merge pull request #1980 from MGJ520/dev
...
Add support for the GAT562 Mesh Tracker Pro device
2026-03-09 19:40:29 +13:00
MGJ
92ca3da7cc
Add support for the GAT562 Mesh Tracker Pro device
2026-03-09 14:25:24 +08:00
MGJ
7667c7cc9c
Add support for the GAT562 Mesh Tracker Pro device
2026-03-09 13:13:41 +08:00
Robert Ekl
03fe97b77d
docs: sync companion and kiss protocol docs
2026-03-08 21:31:08 -06:00
Robert Ekl
e80e72aae9
docs: sync CLI and payload docs with implementation
2026-03-08 21:31:08 -06:00
kelsey hudson
45d5f8f7f0
Support for muzi works R1 Neo device.
...
Support for R1 Neo hardware. New variant and baseboard class.
* Known issues:
- power management is not currently supported
- power off via long button press is not implemented
Add support for Epson Seiko RX8130CE I2C Real-time clock.
2026-03-08 11:46:20 -07:00
Scott Powell
4de3db2fc0
* Dispatcher::next_tx_time init fix
2026-03-08 23:58:28 +11:00
ripplebiz
71e1e63dfd
Merge pull request #1297 from ViezeVingertjes/feature/duty-cycle-token-bucket
...
Implement token bucket duty cycle enforcement
2026-03-08 23:54:32 +11:00
AI7NC
3cbc30a3f2
Update cli_commands.md R400 grammer
...
Small grammar fix
2026-03-07 11:14:03 -08:00
AI7NC
8a61051f17
Update cli_commands.md R402
2026-03-07 11:01:20 -08:00
AI7NC
71462ec422
Update cli_commands.md R399 updates
2026-03-07 10:55:40 -08:00
AI7NC and Wessel
23fcb8e866
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-03-07 10:43:23 -08:00
AI7NC and Wessel
d0567950fb
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-03-07 10:42:13 -08:00
AI7NC and Wessel
3295d2ebb2
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-03-07 10:40:41 -08:00
overkillfpv
2e24b0c91e
simplified the calls
2026-03-08 05:37:49 +11:00
EtoOnAmill
9a3d1fde81
Removed section for individual get bridge.source
2026-03-07 16:54:50 +01:00
Liam Cottle
985444b6fa
Merge pull request #1960 from jbrazio/2026/devcontainer
...
Update devcontainer config
2026-03-08 01:54:26 +13:00
João Brázio
f74dc308e8
devcontainer: add bun feature and update postCreateCommand
2026-03-07 12:49:25 +00:00
Liam Cottle
f571690653
Merge pull request #1689 from aXistem-dev/feature/sensecap-led-fix
...
sensecap_solar: Fixing LED definitions
2026-03-07 23:55:09 +13:00
Confi
55cde28704
sensecap_solar: fix LED definitions (white=11, blue=12)
2026-03-07 09:59:30 +01:00
Liam Cottle
e225f6eb8f
Merge pull request #1589 from marnick-hartgers/gps_sencecap_solar_p1
...
Added gps support for Sensecap p1 solar
2026-03-07 21:31:38 +13:00
ripplebiz
1391fda85b
Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression
...
Fix countBefore regression: replace sentinel with getOutboundTotal()
2026-03-07 18:48:02 +11:00
Liam Cottle
6f0bc8b611
Merge pull request #1936 from Quency-D/dev-heltec-tracker-v2
...
Update Heltec Tracker v2 to version KCT8103L.
2026-03-07 17:59:19 +13:00
Liam Cottle
68eca60309
Merge pull request #1350 from weebl2000/sync-gps-time-30min
...
Sync gps time every 30min
2026-03-07 17:11:07 +13:00
Liam Cottle
a030114a8a
Merge pull request #1915 from weebl2000/fix-incorrect-ram-flash-maximums
...
Fix incorrect ram flash maximums (supersedes #765 )
2026-03-07 16:52:39 +13:00
Liam Cottle
541dad8202
Merge pull request #1391 from R6DJO/fix_t1000-e_temp
...
T1000-E: Negative temperature values incorrectly displayed due to char signedness
2026-03-07 16:49:54 +13:00
Liam Cottle
65d57abcee
Merge pull request #1364 from weebl2000/pass-rtc_clock-to-locationprovider
...
Pass rtc_clock to MicroNMEALocationProvider in all variants
2026-03-07 16:41:29 +13:00
overkillfpv
95a51a30c6
Cache preamble SF to avoid redundant setPreambleLength() on every TX
2026-03-07 12:48:22 +11:00
AI7NC
a4fba5a6ac
Update cli_commands.md
2026-03-06 16:30:45 -08:00
AI7NC
9edef11252
Update cli_commands.md to include path.hash.mode and loop.detect
...
Adding the new repeater cli commands introduced in 1.14
Ref: https://buymeacoffee.com/ripplebiz/path-diagnostics-improvements
2026-03-06 15:22:00 -08:00
Quency-D
edca686339
Fixed a bug in the LORA_TX_POWER comment.
2026-03-06 16:04:47 +08:00
Quency-D
cc48c8c91d
Update Heltec Tracker v2 to version KCT8103L.
2026-03-06 14:19:07 +08:00
Quency-D
6b4b7f4837
Merge pull request #7 from meshcore-dev/dev
...
merge Dev
2026-03-06 11:27:47 +08:00
Scott Powell
9561779ced
Merge branch 'dev'
...
# Conflicts:
# docs/cli_commands.md
2026-03-06 12:21:52 +11:00
Scott Powell
bece76210e
* ver 1.14.0
2026-03-06 12:20:04 +11:00
João Brázio
ed78c50eee
Add setRxBoostedGain method declaration and implementation for SX1262/SX1268
2026-03-05 18:48:40 +00:00
João Brázio
2e52efb209
Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants
2026-03-05 18:38:57 +00:00
João Brázio
e8b758532c
Rename sx126x_rx_boosted_gain to rx_boosted_gain
2026-03-05 18:14:47 +00:00
João Brázio
a5dc732fb0
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-05 17:21:38 +00:00
overkillfpv
afb02011da
Update preamble dynamically to match runtime SF changes via CLI
2026-03-05 22:14:22 +11:00
overkillfpv
19dd4121a1
Increased preamble to 32 for <sf9 and left at 16 for sf9 and above
2026-03-05 21:39:14 +11:00
Scott Powell
afbd45b26e
* LOOP_DETECT_MODERATE bug fix
2026-03-05 17:38:51 +11:00
Quency-D
76952869c1
Fixed the compilation error of HeltecV4Board::begin.
2026-03-05 14:34:12 +08:00
Quency-D
36cb6f79d9
Merge branch 'dev' into dev-heltec-v4.3
...
Merge branch 'dev' into dev-heltec-v4.3
2026-03-05 14:22:41 +08:00
Scott Powell
f4d1bfea18
* repeater: new "get/set loop.detect {off | minimal | moderate | strict }"
2026-03-05 16:26:09 +11:00
Liam Cottle
6d9ee8cd06
Merge pull request #1811 from robekl/docs_update_cli_commands
...
docs: correct CLI command forms and targeted typos
2026-03-05 15:31:32 +13:00
Liam Cottle
ec5c82d6ab
Merge pull request #1490 from mesher-de/feature-0hop-cli
...
Add CLI-command for zerohop advert
2026-03-05 15:24:48 +13:00
Liam Cottle
8d7d34fc4b
Merge pull request #1001 from kallanreed/fix_gps_debug_logging
...
Use correct macro for GPS logging test
2026-03-05 13:14:37 +13:00
Quency-D
51aa2b369c
Merge pull request #4 from weebl2000/solar-watchdog
...
Address review comments
2026-03-04 11:11:08 +08:00
Liam Cottle
6788a98467
Merge pull request #1901 from weebl2000/fix-ikoka-handheld-build
...
Fix ikoka handheld build
2026-03-04 15:54:17 +13:00
Wessel Nieboer
548397e61c
update PR #765
2026-03-04 03:38:35 +01:00
Wessel Nieboer
0086d7b821
Merge remote-tracking branch 'origin/dev' into fix-incorrect-ram-flash-maximums
2026-03-04 03:37:01 +01:00
Wessel Nieboer
d7b406eb9a
Address review comments
2026-03-04 03:13:53 +01:00
Quency-D
0a55f83077
Merge branch 'dev' into dev-heltec-v4.3
2026-03-04 09:46:42 +08:00
Wessel Nieboer
b1de55a3c5
Pass rtc_clock to all MicroNMEALocationProvider instances
...
Enable GPS time synchronization across all variants by passing
&rtc_clock to MicroNMEALocationProvider. When GPS gets a valid
fix, the RTC clock is now updated automatically every 30 minutes.
Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag,
lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1,
lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3,
promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.
2026-03-03 15:45:07 +01:00
Wessel Nieboer
1bbe732c4c
Sync time with GPS every 30 minutes
...
Unless your GPS is being spoofed there isn't really a downside to
syncing more often with GPS.
I understand the RTC is very stable, but especially with powersaving now
clock drift is worse, we should sync more often.
2026-03-03 15:44:55 +01:00
Wessel Nieboer
55b31334e2
and buildscript
2026-03-03 15:37:33 +01:00
Wessel Nieboer
af7d4e585d
and board!
2026-03-03 15:37:33 +01:00
Wessel Nieboer
d261c1fd8c
Fix ikoka handheld build
...
The extends was wrong.
2026-03-03 15:37:32 +01:00
Liam Cottle
754e2dc2c5
Merge pull request #1841 from weebl2000/nit-prefs
...
prefs is 5 char length :nerd:
2026-03-04 01:39:55 +13:00
ripplebiz
a1e1c4655f
Merge pull request #1743 from weebl2000/fixagcreset
...
fix agc reset on SX126x, SX1276 & LR11x0 chips
2026-03-03 22:19:34 +11:00
Liam Cottle
434ef6d94a
Merge pull request #1836 from weebl2000/fix-rak3401-sky66122-11-fem
...
Fix RAK3401 SKY66122-11 FEM control: enable CSD/CPS for proper PA/LNA operation
2026-03-03 23:51:42 +13:00
Liam Cottle
ee2387c0ac
Merge pull request #1633 from weebl2000/fix/gps-uart-power-leak
...
Fix GPS UART consuming +8mA when disabled (nRF52)
2026-03-03 23:26:58 +13:00
Liam Cottle
59d8f7346f
Merge pull request #1600 from weebl2000/heltec_deep_sleep_lna
...
Hold GC1109 PA_POWER during deep sleep for LNA RX wake
2026-03-03 23:20:22 +13:00
Liam Cottle
18e58287ca
Merge pull request #1351 from weebl2000/heltec_wireless_tracker_gps
...
Support GPS properly on Heltec Wireless Tracker v1.x
2026-03-03 23:11:46 +13:00
ripplebiz
103b1db38e
Merge pull request #1900 from wbijen/feature/contact-filter-by-hops
...
Add configurable max hops filter for auto-add contacts
2026-03-03 21:05:44 +11:00
Quency-D
9ee273963a
Merge pull request #3 from weebl2000/dev-heltec-v4.3
...
Default LNA enabled=true and fix the sleep order
2026-03-03 17:59:44 +08:00
Quency-D and Wessel
d784929f07
Update variants/heltec_v4/LoRaFEMControl.cpp
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-03-03 17:08:32 +08:00
Quency-D and Wessel
defbbdd0d1
LNA is enabled by default.
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-03-03 17:07:56 +08:00
Quency-D and Wessel
3ee8f3f409
Update variants/heltec_v4/LoRaFEMControl.cpp init function
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-03-03 17:06:58 +08:00
Wouter Bijen
59d1548b86
Clamp max_hops to 64 to cover full protocol hop range (0-63)
2026-03-03 09:05:53 +01:00
Wouter Bijen and Claude Opus 4.6
d6b1cb77e5
Clarify comment wording: 1 = direct (0 hops)
...
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-03 08:40:17 +01:00
Wouter Bijen and Claude Opus 4.6
79d0623e3c
Address PR review: subtract-1 encoding and clamp max_hops
...
- Change > to >= so stored value 1 means direct/0-hop only (liamcottle)
- Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl)
- Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-03 08:37:22 +01:00
Wouter Bijen and Claude Opus 4.6
e20b41631b
Add configurable max hops filter for auto-add contacts
...
Filter auto-add of new contacts by hop count (issues #1533 , #1546 ).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-02 20:41:41 +01:00
Wessel Nieboer
94c6292ff1
Fix sleep
2026-03-02 11:34:42 +01:00
Wessel Nieboer
13be1ecaba
default lna_enabled=true
2026-03-02 11:34:12 +01:00
Daniel Novak
fe2a286de8
Also fix countBefore(0xFFFFFFFF) to return _num
...
The signed comparison in countBefore breaks for the max uint32_t value.
Even though callers now use getOutboundTotal(), the function itself
should be correct for all inputs.
2026-03-01 07:41:50 +01:00
Wessel Nieboer
7d1ddfd312
Fix GPS +8mA power leak when disabled (nRF52)
...
On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN.
MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3
rail) but stop() never set it back LOW, leaving the GPS module powered
even when disabled.
Assert reset pin in stop() to mirror begin(), and guard
_location->loop() behind gps_active check.
Fixes meshcore-dev/MeshCore#1628
2026-02-28 19:13:42 +01:00
Wessel Nieboer
042658a0c2
Add GPS support Heltec Wireless Tracker v1.x
...
Pin mapping verified against HTIT-Tracker V0.5 schematic:
- GPIO35 (GPS_EN): N-ch MOSFET drives P-ch high-side switch, active HIGH
- GPIO36 (GPS_RST): hardware reset, active LOW
- GPIO33/34: UART TX/RX
Delegates power management to MicroNMEALocationProvider begin()/stop()
which independently controls GPS power via GPS_EN and shares VEXT with
the display through RefCountedDigitalPin.
2026-02-28 19:09:28 +01:00
Wessel Nieboer
8a2366043a
fix comment, we know the band now after checking LR1110 user manual
2026-02-28 19:09:25 +01:00
Wessel Nieboer
ce83dc9004
Calibrate configured frequency for AGC reset
2026-02-28 19:09:25 +01:00
Wessel Nieboer
4d2d9a55e4
Also implement LR11x10 AGC reset
...
Similar to SX126x but simpler.
2026-02-28 19:09:25 +01:00
Wessel Nieboer
72810274b8
make it more dry
2026-02-28 19:09:25 +01:00
Wessel Nieboer
4f625ad2e2
reset noise_floor sampling after agc reset
2026-02-28 19:09:25 +01:00
Wessel Nieboer
87e4f6784e
when doing AGC reset, call Calibrate(0x7F)
...
1. warm sleep
2. wake to stdby
3. Calibrate(0x7F) to reset all internal blocks
4. re-apply DIO2 RF / boosted gain & register patch to make sure
everything is as it was
2026-02-28 19:09:25 +01:00
Wessel Nieboer
dd903eac41
fix agc reset
2026-02-28 19:09:25 +01:00
Wessel Nieboer
2d216b7115
Fix pin mapping & TX switch (it's DIO2)
2026-02-28 19:09:06 +01:00
Wessel Nieboer
809f8badf1
Drive CTX low first
2026-02-28 19:09:06 +01:00
Wessel Nieboer
a114d515e4
Add SX126X_REGISTER_PATCH for RAK3401
2026-02-28 19:09:06 +01:00
Wessel Nieboer
7af21122c4
Fix RAK3401 SKY66122-11 FEM control: enable CSD/CPS for proper PA and LNA operation
...
The RAK13302 1W module uses a Skyworks SKY66122-11 front-end module with
three digital control pins (CSD, CTX, CPS) that must be actively driven
by the host MCU. The previous code only managed CTX (GPIO 31) — toggling
it for TX/RX — but never initialized CSD (GPIO 24) or CPS (GPIO 21),
leaving them floating with no pull-up/pull-down resistors on the PCB.
With floating CSD and CPS, the SKY66122 was in an undefined operating
mode:
- The 30 dB TX PA may not have been reliably engaging
- The 16 dB RX LNA was never reliably active, degrading receive
sensitivity
2026-02-28 19:09:06 +01:00
Wessel Nieboer
2f98ef7ddb
prefs is 5 char length :nerd:
2026-02-28 19:07:38 +01:00
Wessel Nieboer
c7fd4ee9e2
Add 1ms delay after powering PA (cold-boot)
2026-02-28 19:05:31 +01:00
Wessel Nieboer
75730e60db
Hold GC1109 PA_POWER during deep sleep for LNA RX wake
...
The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep
to keep the LNA active, enabling proper RX sensitivity for
wake-on-packet. Without this, the LNA is unpowered during sleep
and RX wake sensitivity is degraded by ~17dB.
Release RTC holds in begin() after configuring GPIO registers
(not before) to ensure glitch-free pin transitions on wake.
Trade-off: ~6.5mA additional sleep current for significantly
improved wake-on-packet range.
2026-02-28 19:05:31 +01:00
Daniel Novak
3c4d10f55c
Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal()
...
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.
This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
2026-02-28 17:19:04 +01:00
Daniel Novak
829bf5012d
Fix countBefore sentinel regression from millis wraparound fix
...
PR #1795 changed PacketQueue::countBefore() to use signed 2's complement
arithmetic for millis wraparound safety. However, this broke the
0xFFFFFFFF sentinel pattern used by callers to mean "count all packets
regardless of schedule".
With the signed comparison, countBefore(0xFFFFFFFF) always returns 0,
causing hasPendingWork() to report false and repeaters to sleep with
packets still queued. Stats reporting also shows queue_len as 0.
Add an early-return for the sentinel value before the loop, and document
the sentinel convention on the virtual interface and implementation.
2026-02-28 16:22:58 +01:00
fdlamotte
6f543252eb
Merge pull request #1871 from enricolorenzoni59/gps-sync-reply
...
`gps sync` reply: fill buffer with text
2026-02-28 07:45:19 -04:00
enricolorenzoni59
954a2d084b
gps sync reply: fill buffer with text
2026-02-28 09:07:30 +00:00
Liam Cottle
ae2d9c40cc
Merge pull request #1569 from IoTThinks/MCdev-Fixed-Incorrect-Release-of-RefCountedDigitalPin
...
Fixed RefCountedDigitalPin.h and SSD1306Display for Heltec v4
2026-02-28 17:35:17 +13:00
Specter242
ed3e413a54
sensecap solar: stabilize wake pin and add button hold poweroff
2026-02-27 22:51:19 -05:00
Specter242
1dc7bb9680
sensecap solar: add poweroff command and board power/LED parity
2026-02-27 22:12:12 -05:00
João Brázio
75508ac10b
Merge branch 'dev' into 2026/remote-lna
2026-02-27 10:32:14 +00:00
João Brázio
39b94e3544
Merge pull request #1 from weebl2000/2026/remote-lna
...
Fix remote LNA toggle bugs: correct register comparison, add missing implementation & wire up companion radio
2026-02-27 10:11:46 +00:00
Quency-D
9c2fb042f6
Added version identification.
2026-02-27 16:49:00 +08:00
Ben Allfree
0708ce3720
fix: JSON parsing regression in build
2026-02-26 20:37:27 -08:00
Quency-D
ea13847dd5
add heltec v4.3
2026-02-26 17:47:03 +08:00
Daniel Novak
5461450bfa
Move block-alignment check before HMAC computation
...
Address review feedback:
- Move the alignment check before the HMAC-SHA256 computation to skip
expensive crypto on obviously malformed packets
- Update MACThenDecrypt header comment to document block-alignment as a
reason for returning zero
2026-02-26 09:08:06 +01:00
Scott Powell
7d913e45f4
* bug fix: Packet::writeTo(), Packet::readFrom()
2026-02-26 15:36:21 +11:00
Scott Powell
5c62d22941
Merge branch 'multibyte-paths' into dev
2026-02-26 12:30:23 +11:00
ripplebiz
3a72ee5c9e
Merge pull request #1820 from recrof/patch-1
...
Update default preset to EU/UK (Narrow)
2026-02-26 12:08:17 +11:00
lincomatic
4a9524915b
don't limit bridge_baud to 115200
2026-02-25 07:52:42 -08:00
Scott Powell
6656e7a3cc
Merge branch 'dev' into multibyte-paths
2026-02-25 17:11:51 +11:00
Scott Powell
e25e0b87f9
* Packet::copyPath() fix
2026-02-25 17:10:31 +11:00
Liam Cottle
f414eb5960
Merge pull request #1826 from dreirund/docs_-_fix-faq.md-bogous-last-tableofcontentsentry
...
docs/faq.md: Table of Contents: Remove bogous `[| | High Output | 22 dBm | 28 dBm | |](#--high-output--22-dbm--28-dbm--)`
2026-02-25 15:25:26 +13:00
Liam Cottle
fc771091b6
Merge pull request #1822 from dreirund/docs_-_add-more-other-projects
...
docs/faq.md: Section 5.14: Add more external projects, and categorise the section.
2026-02-25 15:18:15 +13:00
Liam Cottle
ac078dbab6
Merge pull request #1838 from weebl2000/github_workflows_sanitycheck
...
Add basic sanity test github PR workflow
2026-02-25 14:52:10 +13:00
Wessel Nieboer
394e963d69
Add basic sanity test github PR workflow
...
Build a few generic variants to verify at least those compile. Can't
hurt.
2026-02-25 02:43:48 +01:00
Wessel Nieboer
50bddbee61
Fix remote LNA toggle bugs: correct register comparison, add missing implementations, wire up companion radio
...
getRxBoostedGain was returned true because both 0x94 (power saving) and
0x96 (boosted gain = 1) return true
2026-02-24 23:49:06 +01:00
Oliver Weyhmüller
e8f3866059
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion ESP envs
2026-02-24 22:26:24 +01:00
dreirund
7b96517c1f
Merge pull request #1 from dreirund/docs_-_categorise-faq: "docs/faq.md: Categorising section 5.14. "Q: Are there are projects built around MeshCore?""
...
docs/faq.md: Categorising section 5.14. "Q: Are there are projects built around MeshCore?"
2026-02-24 18:21:36 +01:00
dreirund
a2d486f84e
docs/faq.md: Categorising section 5.14. "Q: Are there are projects built around MeshCore?".
...
In `[docs/faq.md](https://github.com/meshcore-dev/MeshCore/blob/main/docs/faq.md )`, the entries are now grouped by category.
This patch applies on top of https://github.com/meshcore-dev/MeshCore/pull/1822 .
2026-02-24 18:19:50 +01:00
dreirund
54a6126c0a
docs/faq.md: Table of Contents: Remove bogous [| | High Output | 22 dBm | 28 dBm | |](#--high-output--22-dbm--28-dbm--).
...
The table of contents of `docs/faq.md` had at the end a bogous entry
```markdown
- [| | High Output | 22 dBm | 28 dBm | |](#--high-output--22-dbm--28-dbm--)
```
This patch removes that bogous entry.
2026-02-24 17:48:30 +01:00
dreirund
d626cacfea
faq.md: Section 5.14: Added more external projects.
...
Added to section 5.14 "Are there are projects built around MeshCore?":
* awesome-meshcore
* meshcore-open
* MeshCore-Cardputer-ADV
* LunarCore
* MC-Term
* Meck
* Meshcore for Wio Tracker L1 Pro
* MeshCore map auto uploader
2026-02-24 13:26:30 +01:00
Scott Powell
2c167d4479
* misc
2026-02-24 21:30:04 +11:00
Rastislav Vysoky
e80c91eb01
Update default preset to EU/UK (Narrow)
2026-02-24 11:28:23 +01:00
Scott Powell
06d1e462dd
* CMD_GET_ADVERT_PATH bug fix
2026-02-24 14:23:59 +11:00
Robert Ekl
32678f85ac
docs: correct CLI command forms and targeted typos
2026-02-23 18:53:20 -06:00
Liam Cottle
3aa2a9bc99
Merge pull request #1808 from callum5892/dev
...
Added build flags for M5Stack Unit C6L
2026-02-24 12:24:56 +13:00
Daniel Novak
26885ded29
Fix stack buffer overflow in MACThenDecrypt via block-alignment check
...
Add validation that ciphertext length is a multiple of CIPHER_BLOCK_SIZE
before calling decrypt(). The decrypt() function processes data in 16-byte
AES blocks, rounding up non-aligned input, which can write up to 8 bytes
past the caller's stack buffer. This can be triggered by crafted packets
that pass the 2-byte HMAC check (1-in-65536 chance per attempt), enabling
a persistent denial-of-service attack against repeaters and other nodes.
2026-02-23 21:40:17 +01:00
callum5892
648c9bb818
Added build flags for M5Stack Unit C6L
...
Enabled USB-CDC on boot for M5Stack_Unit_C6L_companion_radio_usb to fix serial connection issues
2026-02-23 17:31:18 +00:00
Scott Powell
1d845c9e0f
* room server fix
2026-02-24 01:08:11 +11:00
Scott Powell
85c46c5732
* revert CMD_SEND_SELF_ADVERT, use _prefs.path_hash_mode
2026-02-24 00:08:13 +11:00
Scott Powell
0c8a5c80cf
* Dispatcher bug fixes
2026-02-23 23:51:30 +11:00
Scott Powell
b7941d0beb
* added CMD_SET_PATH_HASH_MODE
2026-02-23 21:08:22 +11:00
Scott Powell
1754d0d328
* companion: new pref: path_hash_mode (0..2)
...
* companion: new field in CMD_SET_OTHER_PARAMS, path_hash_mode
* companion: CMD_SEND_SELF_ADVERT, cmd_frame[1] now holds the path hash size (0 = zero hop, 1..3 = flood path hash size)
2026-02-23 18:26:56 +11:00
Scott Powell
9f1f1bcf47
* CommonCLI: added "get/set path.hash.mode "
2026-02-23 14:25:19 +11:00
Scott Powell
8423633db3
Merge branch 'dev' into multibyte-paths
2026-02-23 13:11:36 +11:00
ripplebiz
f920af9f80
Merge pull request #1792 from ElectroMW/feature/t-beam-supreme-improvements
...
T-Beam Supreme - Make full use of board's 8MB Flash and add Companion WiFi target
2026-02-23 12:38:56 +11:00
ripplebiz
8d2f95b7e3
Merge pull request #1794 from accumulator/heltec_wireless_tracker_companion_usb
...
add companion usb build target for Heltec Wireless Tracker
2026-02-23 12:37:02 +11:00
ripplebiz
629dbfe5b4
Merge pull request #1795 from DanielNovak/fix-packetqueue-millis-wraparound
...
Fix millis() wraparound in PacketQueue time comparisons
2026-02-23 12:33:21 +11:00
Sam Koucha
006ff78cd7
Make full use of board's 8MB Flash and add companion WiFI target
2026-02-22 18:14:39 +00:00
Daniel Novak
4997c74e73
Fix millis() wraparound in PacketQueue time comparisons
...
PacketQueue::countBefore() and PacketQueue::get() use unsigned
comparison (_schedule_table[j] > now) to check if a packet is
scheduled for the future. This breaks when millis() wraps around
after ~49.7 days: packets scheduled just before the wrap appear
to be in the far future and get stuck in the queue.
Use signed subtraction instead, matching the approach already used
by Dispatcher::millisHasNowPassed(). This correctly handles the
wraparound for time differences up to ~24.8 days in either
direction, well beyond the maximum queue delay of 32 seconds.
2026-02-22 18:01:55 +01:00
Sander van Grieken
e57c22a0fb
add companion usb build target for Heltec Wireless Tracker
2026-02-22 17:57:36 +01:00
Scott Powell
62320b64c5
* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
...
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
ripplebiz
1e1e57c8cd
Merge pull request #1726 from weebl2000/fix-packet-pool-leak-queue-full
...
Fix packet pool leak when rx queue is full
2026-02-21 17:18:02 +11:00
ripplebiz
cbe0e49048
Merge pull request #1728 from oltaco/nrf52-bootloader-version
...
NRF52: Add get bootloader.ver command for NRF52
2026-02-21 12:56:52 +11:00
Liam Cottle
5b2e8abfc8
Merge pull request #1758 from jeroenvermeulen/patch-1
...
Update admin password command description
2026-02-21 12:45:02 +13:00
Jeroen Vermeulen
d9f1a6fac3
Update admin password command description
...
Tested in v1.13.
These commands don't work anymore:
```
get password
-> ??: password
set password secret
-> unknown config: password secret
```
This does work:
```
password secret
-> password now: secret
```
2026-02-20 20:48:48 +01:00
Kevin Le
c9b9fbd8bb
Reverted to use GPIO 17, 18 as I2C for Heltec v4 repeater
2026-02-18 22:38:24 +07:00
Kevin Le
a989a2bb0c
Disabled periph_power for Heltec v4's display
2026-02-18 22:32:01 +07:00
Kevin Le
ade1c8f7c2
Set back PIN_VEXT_EN_ACTIVE=HIGH
2026-02-18 22:32:01 +07:00
Kevin Le
fa55496ebc
Avoid negative _claims
2026-02-18 22:32:01 +07:00
Kevin Le
15f25697db
Fixed RefCountedDigitalPin.h to release claim correctly. Ensure no negative claims number.
2026-02-18 22:32:01 +07:00
taco
428f0e3ded
add get bootloader.ver command for nrf52
2026-02-18 15:35:20 +11:00
Wessel Nieboer
0181520f4c
Fix packet pool leak when rx queue is full
...
PacketQueue::add() silently dropped packets when the queue was at
capacity. The packet pointer was lost — never enqueued, never returned
to the unused pool. Each occurrence permanently shrank the 32-packet
pool until allocNew() returned NULL and the node went deaf. Return bool
from add() and free the packet back to the pool on failure.
2026-02-17 23:54:33 +01:00
mesher-de
c14a471cab
add advert.zerohop command to CLI
2026-02-17 13:56:18 +01:00
Liam Cottle
5747181336
Merge pull request #1718 from realtag-github/repeater-v1.13-implement-discover
...
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 23:53:28 +13:00
Scott Powell
2b6c116369
* companion: retransmit delays now hard-coded (only for client repeat mode)
2026-02-17 20:25:56 +11:00
Scott Powell
e0384e5dd8
* repeater: slight increase to default direct.txdelay
2026-02-17 20:10:13 +11:00
ripplebiz
93b79925a8
Merge pull request #1719 from 3dpgg/pr_lilygo_tlora_terminal_chat
...
Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
2026-02-17 15:34:56 +11:00
3DPGG
53e92916d9
Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
...
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.
The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.
As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
2026-02-16 18:10:29 -08:00
realtag
f3462587bc
Allow repeater discovery even if repeater mode is disabled on the requesting repeater.
2026-02-17 01:39:04 +00:00
realtag
3cb907f6c8
Increased the timeout timer to 60 seconds, up from 30 seconds.
2026-02-17 01:22:17 +00:00
realtag
bdae8823b5
discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses
2026-02-17 01:04:14 +00:00
realtag
ff208504b7
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 00:41:24 +00:00
ripplebiz
30e2121ac8
Merge pull request #1699 from recrof/m5stack-m6l-build-fix
...
fix M5Stack Unit M6L build errors
2026-02-15 21:38:00 +11:00
recrof
2bb616689c
fix M5Stack Unit M6L build errors
2026-02-15 11:25:27 +01:00
Scott Powell
f03f3fc986
Merge branch 'dev'
2026-02-15 17:25:07 +11:00
Scott Powell
19e9551738
* ver 1.13.0
2026-02-15 17:24:37 +11:00
Liam Cottle
5d0e84d4d9
Merge pull request #1346 from mboelen/patch-1
...
Update faq.md
2026-02-15 18:20:00 +13:00
ripplebiz
ea9588e52e
Merge pull request #1603 from oltaco/fix-build.sh-for-RP2040-and-STM32
...
Add RP2040 and STM32 support to build.sh
2026-02-15 16:09:46 +11:00
ripplebiz
4ece286c9b
Merge pull request #1669 from Azuresword/fix/wio-tracker-l1-grove-sensor-v2
...
Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
2026-02-15 15:55:25 +11:00
ripplebiz
6860b207f6
Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon
...
Add muted icon to show when buzzer is muted
2026-02-15 15:54:33 +11:00
Scott Powell
d3f378342c
* client_repeat state now in _DEVICE_INFO response
2026-02-14 16:45:41 +11:00
Scott Powell
9c0282016f
* companion client repeat mode support
2026-02-14 15:50:06 +11:00
taco
cc8193aad0
update build.sh to support RP2040 and STM32
2026-02-13 12:43:04 +11:00
taco
b3b20c1c3d
add -D ESP32_PLATFORM to esp32_base
2026-02-13 12:01:04 +11:00
Liam Cottle
ad40fc432c
Merge pull request #1678 from liamcottle/main
...
Docs: Update Packet Formats
2026-02-12 17:13:51 +13:00
liamcottle
e35e6d6bcf
refactor packet format docs
2026-02-12 17:12:23 +13:00
Liam Cottle
3ac7af47e0
Merge pull request #1671 from recrof/rak3112-fix
...
fix: usb and ui for rak 3112
2026-02-12 11:39:27 +13:00
Leah
61a8a69a46
Add muted icon to show when buzzer is muted
2026-02-11 10:00:20 +01:00
Rastislav Vysoky
562a245695
fix usb and build for rak 3112
2026-02-11 09:34:41 +01:00
dylan and Claude Opus 4.6
8535cf5726
Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
...
Sensors connected via the Grove I2C connector (D18/D17) were not detected
because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default.
Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1,
matching the physical Grove connector pinout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-02-11 14:12:48 +08:00
ripplebiz
f4b4b9addc
Merge pull request #1611 from weebl2000/semtech-patch-tracker-v2
...
Enable register patch heltec tracker v2
2026-02-11 14:04:58 +11:00
ripplebiz
de32d97798
Merge pull request #1645 from Snayler/Snayler-patch-1
...
Enable TX LED for LilyGo LoRa32 V2.1_1.6
2026-02-11 13:52:47 +11:00
Liam Cottle
b0b3f1ffc9
Merge pull request #1557 from mattzzw/dev
...
cli_commands.md: `region` available via remote cli in 1.12.0
2026-02-11 11:58:11 +13:00
mattzzw
c4113ac7e7
Merge branch 'meshcore-dev:dev' into dev
2026-02-10 22:33:43 +01:00
João Brázio
dba7c27e77
Fix typo with USE_SX1262/SX1268
2026-02-10 15:05:10 +00:00
João Brázio
072d73b0f2
Implement remote lna toggle cli cmd
2026-02-10 15:02:23 +00:00
Liam Cottle
e723dfff78
Merge pull request #1638 from thanegill/build_sh-list
...
build.sh: add list and -l to list firmwares available to build
2026-02-10 22:27:35 +13:00
Liam Cottle
b6639ea7d7
Merge pull request #1651 from liamcottle/fix/path-trace-timeout
...
Fix: Path Trace Timeout
2026-02-10 17:17:50 +13:00
liamcottle
0f77b88679
fix estimated timeout for multi byte path traces
2026-02-10 17:01:30 +13:00
Snayler
eb21c51f71
Enable TX LED for LilyGo LoRa32 V2.1_1.6
...
Working on my device, green TX LED starts blinking every time I transmit
2026-02-09 23:20:29 +00:00
ripplebiz
469c2e7332
Merge pull request #1570 from Quency-D/fix-heltec-power-consumption
...
Fix heltec-v4 power consumption
2026-02-09 16:49:49 +11:00
ripplebiz
7571558af5
Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
...
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
Quency-D
96fee57b80
Fix watchdog code in repeater
2026-02-09 11:43:41 +08:00
Quency-D
03fa3b767e
Merge branch 'dev' into solar-watchdog
2026-02-09 10:15:50 +08:00
Quency-D
fb093d2b54
Merge pull request #2 from weebl2000/pr-1570-fix-heltec-v4-power
...
Fix double claim, eliminate dead code at compile time
2026-02-09 10:06:59 +08:00
Thane Gill
ed4caee445
build.sh: add list and -l to list firmwares available to build.
2026-02-08 14:49:57 -08:00
Michael
edfa08376e
Merge pull request #2 from agessaman/fix-simplify-kiss-noise-floor
...
Simplify kiss noise floor
2026-02-08 16:26:25 +01:00
Liam Cottle
70fbe7f38a
Merge pull request #1616 from jbrazio/2026/raknorm
...
Refactor environment names and build flags for RAK variants
2026-02-09 01:33:26 +13:00
ripplebiz
8d422a084e
Merge pull request #1609 from weebl2000/bridge-always-has-work
...
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle
cf2d13ae5f
Merge pull request #1620 from thanegill/patch-2
...
Correct manufacturer name 'Elecrow ThinkNode M5'
2026-02-08 14:07:00 +13:00
Thane Gill
6d9b3332d5
Correct manufacturer name 'Elecrow ThinkNode M5'
2026-02-07 17:05:51 -08:00
Liam Cottle
11f6e7f647
Merge pull request #1619 from liamcottle/main
...
[docs] update github build script
2026-02-08 13:04:18 +13:00
liamcottle
23dc35f95e
only deploy docs from main branch
2026-02-08 13:01:13 +13:00
liamcottle
e93d4a8d15
migrate docs build script so cname survives
2026-02-08 13:00:59 +13:00
Liam Cottle
fce56dae50
Merge pull request #1316 from weebl2000/allow-negative-tx
...
Allow negative tx
2026-02-08 12:43:10 +13:00
João Brázio
3c7f9f2bee
Refactor environment names and build flags for RAK variants
2026-02-07 21:26:28 +00:00
ViezeVingertjes
c8672fcb1c
Updated the Dispatcher logic to replace hardcoded values with defined constants for minimum TX budget reserve and airtime division.
2026-02-07 19:07:33 +01:00
ViezeVingertjes
3cf3845d9f
Update logic in Dispatcher to ensure refill is only applied when greater than zero.
2026-02-07 18:26:39 +01:00
Wessel Nieboer
8f40193db2
Parse as signed int
2026-02-07 16:58:06 +01:00
agessaman
8669314fce
simplify kiss noise floor sampling
2026-02-07 07:42:52 -08:00
Wessel Nieboer
41241e9cba
Enable register patch heltec tracker v2
2026-02-07 16:04:01 +01:00
Wessel Nieboer
dd97d863f4
Bridge always has work (prevents sleep)
2026-02-07 15:39:24 +01:00
ViezeVingertjes
484ef3b302
Remove redundant locals in handleSetRadio
2026-02-07 14:32:11 +01:00
ViezeVingertjes
2c6d625921
Remove individual HW_RESP_* defines, use HW_RESP() macro directly
2026-02-07 14:24:34 +01:00
ViezeVingertjes
85410e85e3
Remove redundant send/complete/finished callbacks, use Radio interface directly
2026-02-07 14:22:21 +01:00
ViezeVingertjes
16cc9ccc9a
Update protocol docs for new response codes and signal reporting
2026-02-07 10:26:08 +01:00
ViezeVingertjes
f95d348c7a
Add toggleable per-packet signal reporting
2026-02-07 10:21:36 +01:00
ViezeVingertjes
8a6173a255
Use high-bit convention for hardware response codes
2026-02-07 10:21:32 +01:00
ViezeVingertjes
318452b0b0
Add KISS UART support
2026-02-07 08:51:52 +01:00
agessaman
82ca66a6a8
fix(kiss_modem): improve RX delivery and noise floor sampling
2026-02-07 08:51:52 +01:00
ViezeVingertjes
8def22d5a5
Clarify data frame limitations in KISS modem documentation.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
cdc25aeff4
Reorganise KISS protocol to close gaps.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
59040cc5bb
Update documentation.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
c5c5956916
Add periodic noise floor calibration and AGC reset
2026-02-07 08:51:52 +01:00
ViezeVingertjes
48e60ed57f
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
ripplebiz
7041a433f2
Merge pull request #1578 from recrof/m5stack-unit-c6l
...
initial port of M5Stack Unit C6L
2026-02-07 14:21:47 +11:00
ripplebiz
e2eadcb3f1
Merge pull request #1596 from jbrazio/2026/t114-sensors
...
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
ripplebiz
6cac3d6e4f
Merge pull request #1591 from agessaman/fix-kiss-noise-floor
...
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
Wessel Nieboer
553f922d34
Fix double claim, eliminate dead code at compile time
2026-02-06 11:35:05 +01:00
Wessel Nieboer
20e71ebc53
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Marnick Hartgers
037b1a2e9e
fixed build without ENV_INCLUDE_GPS
2026-02-06 00:12:22 +01:00
Adam Gessaman
c354f8202c
Clean up comments on kiss noise floor changes.
2026-02-05 09:46:30 -08:00
João Brázio
b8ce314278
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
João Brázio
0b822284be
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
João Brázio
499ee0ef23
Merge remote-tracking branch 'pikolin/T114_sensors' into 2026/t114-sensors
2026-02-05 12:57:27 +00:00
ripplebiz
38414f07de
Merge pull request #1398 from Socalix/heltecv4-register1
...
Improve Heltec v4 RX reception with undocumented register patch
2026-02-05 19:14:18 +11:00
ripplebiz
5ebfac4982
Merge pull request #1562 from oltaco/nrf52-sleep-repeater
...
Add Low-Power Sleep for nRF52 Boards
2026-02-05 13:16:47 +11:00
ripplebiz
a1ddfec6e4
Merge pull request #1532 from oltaco/esp32board.h-removewifi
...
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
Marnick Hartgers
c3aaa2822d
Merge remote-tracking branch 'origin/dev' into gps_sencecap_solar_p1
2026-02-04 09:50:40 +01:00
agessaman
b04321f3b8
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
Liam Cottle
2c70975d2e
Merge pull request #1487 from oltaco/refactor-ui-with-ringbuffer
...
Show most recent message on display when no client is connected
2026-02-04 15:48:39 +13:00
Liam Cottle
1e7bc900c8
Merge pull request #1590 from djp3/main
...
Fix URLs
2026-02-04 15:31:28 +13:00
Don Patterson
c99302c4dd
Fix URLs
2026-02-03 18:06:23 -08:00
taco
ea085401ac
refactor ui with ring buffer and display most recent
2026-02-04 09:38:05 +11:00
Marnick Hartgers
6bbaac290f
gps for sensecap p1 solar
2026-02-03 23:06:00 +01:00
Liam Cottle
4fa0245a49
Merge pull request #1583 from liamcottle/docs/migrate
...
Refactor Documentation
2026-02-04 01:03:35 +13:00
liamcottle
f127f69cb8
refactor documentation
2026-02-04 00:59:13 +13:00
ripplebiz
9c7246b664
Merge pull request #1545 from ViezeVingertjes/kiss-modem-firmware
...
Add KISS-like Modem example and protocol documentation
2026-02-03 12:33:19 +11:00
Liam Cottle
d967afa747
Create CNAME
2026-02-03 13:47:43 +13:00
Liam Cottle
e7ca089599
Merge pull request #1579 from liamcottle/docs
...
Add mkdocs for automated documentation site
2026-02-03 13:42:19 +13:00
Rastislav Vysoky
6978cea569
initial port of M5Stack Unit C6L, update pioarduino to newer bugfix release
2026-02-02 22:58:55 +01:00
ViezeVingertjes
d0e6cea382
Remove sync word handling from KissModem.
2026-02-02 18:05:26 +01:00
Quency-D
2c4a5df4cc
Fix low power consumption issues
2026-02-02 14:19:42 +08:00
ripplebiz
68fd239704
Merge pull request #1549 from Meshcore-Portugal/jbrazio/t114-fix
...
Revert "Merge pull request #1428 from etienn01/update-t114-i2c"
2026-02-02 13:36:25 +11:00
Jan Pinkas
eb1409e28b
Enable I2C sensors and EnvironmentSensorManager for Heltec T114
2026-02-01 09:05:03 +01:00
taco
8c9ce15f66
nrf52: allow repeater to sleep when idle
2026-02-01 14:51:27 +11:00
ripplebiz
0ff57a20a3
Merge pull request #1495 from oltaco/esp32-advblob-removal
...
Fix unlimited advert blob growth on ESP32
2026-02-01 13:37:28 +11:00
ripplebiz
3d8aee36de
Merge pull request #1498 from piotrmalek/fix-env-sensor-manager
...
Fix incorrect INA260 address in debug message
2026-02-01 13:34:58 +11:00
ripplebiz
258060eabb
Merge pull request #1512 from litruv/dev
...
Refactor display scaling definitions for HELTEC_VISION_MASTER_T190
2026-02-01 13:33:53 +11:00
ripplebiz
850f6d5c11
Merge pull request #1547 from oltaco/t114-remove-extra-dcdcen
...
Heltec T114: Remove extra DCDC enable call
2026-02-01 13:18:21 +11:00
Matthias Wientapper
bcf5f2a4fb
cli_commands.md: region available via remote cli in 1.12.0
...
changed with #1476
2026-01-31 23:20:56 +01:00
ViezeVingertjes
3171696de5
Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.
2026-01-31 15:15:19 +01:00
ViezeVingertjes
b04f33bd34
Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.
2026-01-31 15:05:25 +01:00
João Brázio
c2a0441201
Revert "Merge pull request #1428 from etienn01/update-t114-i2c"
...
This reverts commit 8bafdae3bd , reversing
changes made to b777ffc865 .
This patch needs to be reverted because it boot freezes t114 433Mhz variant.
2026-01-31 13:45:58 +00:00
taco
348a0cfd8d
add makeBlobPath inline helper for esp32
2026-02-01 00:02:30 +11:00
taco
cdd00716ee
only store advblob when adding/updating contacts
2026-02-01 00:02:30 +11:00
taco
518b651b57
add DataStore::deleteBlobByKey()
2026-02-01 00:02:29 +11:00
taco
fe3ace46ae
t114: remove extra DCDC enable
2026-01-31 23:48:28 +11:00
ViezeVingertjes
a5ad202218
Add KISS Modem firmware
2026-01-31 10:22:32 +01:00
Liam Cottle
e8a11511bc
Merge pull request #1531 from agessaman/add-recv-errors-stats
...
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
2026-01-30 20:57:07 +13:00
agessaman
62ec1b5f25
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
...
Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats
binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and
Python/TypeScript parsing examples for backward compatibility (accept >=26).
2026-01-29 20:44:11 -08:00
taco
e36ca64f00
fix: remove esp_wifi.h from esp32board.h
...
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
ripplebiz
d17540ad88
Merge pull request #1509 from stevenlafl/tbeam-1w
...
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
ripplebiz
9cbe710643
Merge pull request #1500 from Meshcore-Portugal/jbrazio/2026_03a6aa94
...
Allow usage of "/" in radio names
2026-01-30 12:09:08 +11:00
Thomas Abbott
62f1de497f
fix: tcxo voltage 1.8 V for waveshare rp2040
2026-01-29 16:55:07 -08:00
Liam Cottle
886d238ae0
Merge pull request #1528 from recrof/revert-1437-dev
...
Revert "Remove _serial->isConnected() logic from buzzer notifications"
2026-01-30 12:16:12 +13:00
Rastislav Vysoky
fe2632bcc4
Revert "Remove _serial->isConnected() logic from buzzer notifications"
2026-01-30 00:12:04 +01:00
SoCalix
2475bbd2d1
Merge branch 'dev' into heltecv4-register1
2026-01-29 09:12:35 -06:00
fdlamotte
15a0a9ca37
Merge pull request #1524 from recrof/thinknode-m3-m6-fixes
...
Elecrow ThinkNode M3, M6 build errors fix after NRF52Board base class migration
2026-01-29 11:07:32 -04:00
Rastislav Vysoky
f0ccffe9ad
renamed board files
2026-01-29 16:00:19 +01:00
Rastislav Vysoky
c3ea2ca890
fixed build errors and typos/inconsistencies
2026-01-29 15:32:51 +01:00
Scott Powell
5a7c652d91
Merge branch 'dev'
2026-01-29 21:16:53 +11:00
Scott Powell
16dfed0353
* ver 1.12.0
2026-01-29 21:12:31 +11:00
Steven Linn
1a311a6fc4
Set LilyGO T-Beam 1W to use TX0 3.0V (within reference +2.85V~+3.15V)
2026-01-28 22:24:57 -07:00
Steven Linn
f866b484aa
Add battery min/max voltage parameter support
2026-01-28 22:24:49 -07:00
Steven Linn
2d1871be0b
Add LilyGO T-Beam 1W Support
2026-01-28 22:24:43 -07:00
Liam Cottle
97c3c56209
Merge pull request #1508 from recrof/rak4631-cleanup
...
cleanup: moved RAK4631 pindefs from board file to variant.h
2026-01-29 12:35:47 +13:00
Liam Cottle
1525325c5a
Merge pull request #1507 from recrof/rak3401-board-fix
...
fix: build errors because of changes in RAK3401Board base class
2026-01-29 12:05:58 +13:00
Max Litruv Boonzaayer
6f7c74ceb5
Refactor display scaling definitions for HELTEC_VISION_MASTER_T190
2026-01-29 08:05:26 +11:00
Rastislav Vysoky
6df3102717
moved pindefs from board file to variant.h
2026-01-28 17:28:48 +01:00
Rastislav Vysoky
0077bca370
fix: build errors because of changes in NRF52 base class
2026-01-28 17:18:39 +01:00
liamcottle
9a35b3112a
allow manual deploy
2026-01-28 21:48:39 +13:00
liamcottle
1d15c19167
add docs branch for testing
2026-01-28 21:48:39 +13:00
liamcottle
92c4fb9022
add workflow to build and deploy docs to github pages
2026-01-28 21:48:39 +13:00
liamcottle
6ac83cfe28
separate table of contents
2026-01-28 21:48:39 +13:00
liamcottle
aac5fee796
add support for mkdocs
2026-01-28 21:48:39 +13:00
ripplebiz
63a23690fe
Merge pull request #1493 from Cisien/dev
...
Add a cli command reference document
2026-01-28 15:44:26 +11:00
Liam Cottle
690ac6b45c
Merge pull request #1499 from Meshcore-Portugal/jbrazio/2026_2768c833
...
Update runArgs in devcontainer.json
2026-01-28 16:44:02 +13:00
Chris
d5b8d68048
Add a cli command reference document
2026-01-27 19:08:04 -08:00
João Brázio
f5ad70559a
Fix: Correct validation logic in isValidName function
2026-01-27 19:36:12 +00:00
ripplebiz
e4524dce91
Merge pull request #1497 from oltaco/meshtiny-build-fix
...
Build fix for Meshtiny
2026-01-28 05:55:01 +11:00
João Brázio
69fb943365
Update runArgs in devcontainer.json
2026-01-27 16:57:54 +00:00
Piotr Małek
b3c3b91021
Fix incorrect INA260 address in debug message
2026-01-27 16:29:31 +01:00
taco
78d6aee52d
build fix for meshtiny (nrf52board ota refactor)
2026-01-28 00:59:42 +11:00
fdlamotte
9ced884783
Merge pull request #1246 from fschrempf/nrf-dcdc
...
NRF52 boards: Enable internal DC/DC regulator to reduce power consumption and enable OTA support for all boards
2026-01-27 09:02:47 -04:00
fdlamotte
b3d4dfa05b
Merge branch 'dev' into nrf-dcdc
2026-01-27 08:42:58 -04:00
ripplebiz
911d2e1390
Merge pull request #1492 from oltaco/meshtiny
...
Support for Meshtiny
2026-01-27 19:54:16 +11:00
ripplebiz
7fc19d0d51
Merge pull request #1486 from Quency-D/fix-heltec-v4-tft
...
Add heltec v4-tft code.
2026-01-27 19:47:20 +11:00
Scott Powell
ce47082c7b
* Fix: RegionMap build fail on _max
2026-01-27 18:16:21 +11:00
Scott Powell
b9a2b21dd3
* new "clkreboot" CLI command
2026-01-27 15:22:18 +11:00
taco
2cb674af2f
support for meshtiny
2026-01-27 14:15:02 +11:00
ripplebiz
dd21b64fb3
Merge pull request #1476 from mattzzw/region_via_LoRa
...
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
Matthias Wientapper
9dbda71566
Add output of region cmd via lora cli
...
Add cli commands "region list {allowed|denied}"
2026-01-26 17:44:43 +01:00
ripplebiz
bcf6fe985d
Merge pull request #1488 from liamcottle/firmware/boot-adverts
...
Change advert on boot from flood to zero hop
2026-01-26 21:55:48 +11:00
liamcottle
2fb315839c
increase maximum flood advert interval to 168 hours (7 days)
2026-01-26 23:05:10 +13:00
liamcottle
c8992ae5b6
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00
liamcottle
6cb97cca77
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
ripplebiz
0d6d2b9b9f
Merge pull request #1477 from Cisien/dev
...
Expose a counter to track RadioLib receive errors
2026-01-26 19:04:48 +11:00
Quency-D
165b36bbf0
Add v4-tft code.
2026-01-26 13:48:15 +08:00
ssp97
71f03c98e6
fix: avoid redundant redefinition of SX126X_DIO3_TCXO_VOLTAGE
2026-01-26 08:59:19 +08:00
Scott Powell
13118a1cc5
* region names now don't need '#' prefix. (SHA still adds a '#' for back compat)
2026-01-25 18:35:55 +11:00
Chris
834d2ff6dd
Expose a counter to track RadioLib receive errors
...
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
2026-01-24 20:06:29 -08:00
ripplebiz
9a5604a7ab
Merge pull request #1429 from Snayler/dev
...
Fix Serial and TX LED not working on Heltec Wireless Paper V1.2
2026-01-25 14:58:07 +11:00
ripplebiz
816a4bdaca
Merge pull request #1465 from recrof/rak3112-port
...
initial RAK 3112 support
2026-01-25 14:56:17 +11:00
ripplebiz
d32913a694
Merge pull request #1457 from oltaco/remote-set-prvkey
...
Allow set prv.key over LoRa, clear ACL and validate key
2026-01-25 14:46:41 +11:00
taco
a6ecec57f1
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
taco
447b4ca36c
recalc ClientACL shared_secrets at startup
2026-01-25 01:32:44 +11:00
taco
1df8dc9ef3
refactor ClientACL and CommonCLI, add ClientACL::clear()
2026-01-25 01:31:53 +11:00
Scott Powell
e297b5c908
* WIO tracker l1: BLE companion. default node name now MAC address
2026-01-24 22:08:05 +11:00
ripplebiz
9d43a8c467
Merge pull request #1456 from Quency-D/fix-env-i2c
...
Fix env i2c errors
2026-01-24 21:58:14 +11:00
ripplebiz
8ef427b304
Merge pull request #1413 from entr0p1/powermgt-nrf52840-v2
...
nRF52840 Power Management v2 Phase 1 - LPCOMP Wake and startup lockout
2026-01-24 21:51:06 +11:00
Liam Cottle
6a69ae763f
Merge pull request #1459 from oltaco/fix-roomserver-debug
...
Build fix for room server with MESH_DEBUG
2026-01-24 19:31:31 +13:00
Rastislav Vysoky
674f1ec7be
fixed battery measurement
2026-01-23 23:35:00 +01:00
Rastislav Vysoky
5c14894da3
initial port of rak3112
2026-01-23 22:26:24 +01:00
taco
3850bd9fbe
build fix for room server with MESH_DEBUG=1
2026-01-23 23:43:05 +11:00
entr0p1
07316891fc
nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout
...
Added NRF52840 power management core functionality:
- Boot‑voltage lockout
- Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2)
- LPCOMP wake (for voltage-driven shutdowns)
- VBUS wake (for voltage-driven shutdowns)
- Per-board shutdown handler for board-specific tasks
- Exposed CLI queries for power‑management status in CommonCLI.cpp
- Added documentation in docs/nrf52_power_management.md.
- Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards
2026-01-23 17:18:41 +11:00
Scott Powell
bce64a57f9
* T1000e BLE - default node name is now the MAC address
2026-01-23 15:53:58 +11:00
Quency-D
105c96033b
Fix the issue of inconsistent I2C usage in the environmental sensor.
2026-01-23 10:45:13 +08:00
ripplebiz
8bafdae3bd
Merge pull request #1428 from etienn01/update-t114-i2c
...
Update T114 I2C pins for external RTC
2026-01-23 12:25:07 +11:00
ripplebiz
b777ffc865
Merge pull request #1437 from nakoeppen/dev
...
Remove _serial->isConnected() logic from buzzer notifications
2026-01-23 12:20:57 +11:00
ripplebiz
df7037bdcc
Merge pull request #1415 from WattleFoxxo/StationG2-tx-power-changes
...
Change the Station G2's default TX power
2026-01-23 11:58:53 +11:00
Quency-D
5e56ce99d3
Merge pull request #1 from meshcore-dev/dev
...
Merge dev branch
2026-01-22 15:06:44 +08:00
Quency-D
e902293246
Add an external watchdog module
2026-01-22 15:03:40 +08:00
Liam Cottle
dfad6da737
Merge pull request #1445 from oltaco/thinknode_m1-gps-fix
...
ThinkNode M1 GPS fixes
2026-01-22 20:02:41 +13:00
taco
0ee9e82533
thinknode m1: allow GPS to sync clock
2026-01-22 14:42:43 +11:00
taco
cfa985d2b8
thinknode m1: add missing GPS page to new UI
2026-01-22 14:42:08 +11:00
taco
864b125c5f
thinknode m1: add missing getLocationProvider() override
2026-01-22 14:41:07 +11:00
Socalix
0423888916
Revert boosted gain flag to original
2026-01-21 21:12:54 -06:00
nakoeppen
d93179f3fd
Remove _serial->isConnected() logic from buzzer notifications
2026-01-20 20:19:10 -06:00
Miguel de Matos
de29ce84eb
Fix Serial and TX LED not working on Heltec Wireless Paper V1.2
...
As described on #1276 , tested and working on my heltec wireless paper v1.2
2026-01-20 01:52:45 +00:00
Étienne Fesser
8e52af6f1d
Update T114 I2C pins
2026-01-19 21:39:01 +01:00
ripplebiz
c8ad37bb9c
Merge pull request #1387 from chrisdavis2110/rak3401
...
Add Variant rak3401 (for new 1W booster kit)
2026-01-19 16:11:07 +11:00
ripplebiz
6d06bbe6a0
Merge pull request #1408 from oltaco/improved-contact-mgmt
...
Contact management tweaks
2026-01-19 12:29:52 +11:00
chrisdavis2110
5c568f5362
updated variant rak3401
2026-01-17 22:54:20 -08:00
Chris Davis
1477c1889d
Merge pull request #4 from chrisdavis2110/var-rak3401
...
Var rak3401
2026-01-17 22:47:25 -08:00
WattleFoxxo
65116bc7cd
Change the Station G2 default tx power
...
set the default TX power to 7dBm to avoid illegal power output by default.
2026-01-18 14:29:50 +11:00
taco
a47add9c58
only write contacts when changed
2026-01-16 13:15:35 +11:00
taco
807b4b9530
always send PUSH_CODE_NEW_ADVERT when advert was not added to contacts[]
2026-01-16 13:15:35 +11:00
Liam Cottle
5986f512c2
Merge pull request #1402 from recrof/v3-usb-contact-fix
...
fix: bump max contacts for heltec v3 companion usb
2026-01-16 09:50:06 +13:00
Rastislav Vysoky
6e0f3cb2fc
fix: bump max contacts for v3 companion usb
2026-01-15 15:39:44 +01:00
Liam Cottle
2602d6e228
Merge pull request #1399 from mannkind/patch-1
...
Fix Ikoka Stick builds
2026-01-15 23:32:34 +13:00
ripplebiz
667ab27e52
Merge pull request #1379 from oltaco/improved-contact-mgmt
...
Companion: Improved Contact Management
2026-01-15 20:36:28 +11:00
taco
bb9f2eca7e
bootstrap RTC from contact.lastmod and improve slot overwrite logic
...
slot overwrite logic can now safely use contact.lastmod to find oldest contact for overwrite
2026-01-15 18:01:20 +11:00
taco
74f4b8bc82
refactor: add populateContactFromAdvert()
2026-01-15 18:01:20 +11:00
taco
38a4390b2e
contacts: granular autoadd and overwrite-oldest
2026-01-15 18:01:20 +11:00
Dustin Brewer
47d4609c47
Fix Ikoka Stick builds
2026-01-14 17:53:42 -08:00
Socalix
76ef6f9987
Turn on register 0x8B5 LSB for improved RX, turn off boosted gain
2026-01-14 17:52:15 -06:00
Liam Cottle
b55450a31c
Merge pull request #1373 from liquidraver/buildwithoutdebug
...
DISABLE_DEBUG=1 env variable to build.sh
2026-01-15 06:36:00 +13:00
Alexander aka R6DJO and Claude Sonnet 4.5
6004969528
Fix T1000-E negative temperature display bug
...
The ntc_temp2 lookup table was declared as 'char', which can be
unsigned on some platforms, causing negative temperature values
(-30°C to -1°C) to be incorrectly interpreted.
Changed to int8_t to ensure proper signed integer handling of
negative temperatures.
Fixes #1389
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com >
2026-01-14 09:30:20 +03:00
chrisdavis2110
4ab2196107
added variant rak3401
2026-01-13 10:06:50 -08:00
liquidraver
04633f2649
DISABLE_DEBUG=1 env variable to build.sh
2026-01-13 12:48:53 +01:00
Liam Cottle
7d83fe8460
Merge pull request #1378 from recrof/ikoka-cleanup
...
cleanup ikoka variants and add all supported sensors
2026-01-13 17:21:24 +13:00
Liam Cottle
2185b104a0
Merge pull request #1377 from recrof/t3s3-sx1276-fix
...
FIX: remove serial debug logging from t3s3 sx1276 companion usb
2026-01-13 10:34:45 +13:00
Rastislav Vysoky
642dc7686b
cleanup ikoka variants and add all supported sensors
2026-01-12 19:29:32 +01:00
Rastislav Vysoky
5509406a97
remove serial debug logging from t3s3 sx1276 companion usb
2026-01-12 19:19:23 +01:00
Scott Powell
38e64574aa
Merge branch 'regions-request' into dev
2026-01-12 17:48:19 +11:00
Scott Powell
506c2912dc
* repeater login response, FIRMWARE_VER_LEVEL now bumped to 2
2026-01-12 17:47:51 +11:00
Scott Powell
d9f8c78e7f
* new req/resp (after login): REQ_TYPE_GET_OWNER_INFO (includes firmware-ver)
...
* ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit)
* ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits
* CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set
2026-01-12 16:58:35 +11:00
Scott Powell
e30db48877
* ANON_REQ_TYPE_VER_OWNER now delimited by newline chars
2026-01-09 16:32:08 +11:00
Scott Powell
ef938653ff
* CommonCLI: added "set name ..." validation
...
* ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name
2026-01-09 16:28:08 +11:00
Scott Powell
460f3b5abe
* new ANON_REQ_TYPE_VER (for just simple clock + ver info)
2026-01-09 13:54:18 +11:00
Scott Powell
546774a96f
* ANON_REQ_TYPE_VER_OWNER, now includes node_name
2026-01-09 13:20:20 +11:00
Scott Powell
3cc637c89d
* new ANON_REQ_TYPE_VER_OWNER
...
* CommonCLI: new "get/set owner.info ..."
2026-01-09 11:07:31 +11:00
Frieder Schrempf
f401f68309
Remove NRF52BoardOTA class and integrate it into NRF52Board
...
As all NRF52 boards now have OTA support, let's remove the subclass
and integrate it into the base class.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:46:20 +01:00
Frieder Schrempf
fd73e6200f
variants: T1000E: Add OTA support
...
To reduce the number of different code paths, add OTA support for the
remaining NRF52 boards.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:46:09 +01:00
Frieder Schrempf
e0d9d3099d
variants: Sensecap Solar: Use DC/DC regulator
...
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:23 +01:00
Frieder Schrempf
c39edc32da
variants: ProMicro: Use DC/DC regulator
...
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:22 +01:00
Frieder Schrempf
6342547042
variants: Minewsemi ME25LS01: Use DC/DC regulator
...
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:21 +01:00
Frieder Schrempf
dd7eb1860b
variants: Mesh Pocket: Use DC/DC regulator
...
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:20 +01:00
Frieder Schrempf
960b380c96
variants: Lilygo T-Echo (Lite): Use DC/DC regulator
...
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:19 +01:00
Frieder Schrempf
7afcd53412
variants: Ikoka NRF: Use DC/DC regulator
...
The Ikoka boards are based on the Xioa NRF52840 module which is known
to have the LC circuit for the internal DC/DC regulator to be
available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:18 +01:00
Frieder Schrempf
6ebac41a82
variants: Heltec T114: Use DC/DC regulator
...
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:16 +01:00
Frieder Schrempf
29bf937d06
variants: Heltec Mesh Solar: Use DC/DC regulator
...
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:15 +01:00
Frieder Schrempf
65d2d36b02
variants: Thinknode M3/M6: Use common Nrf52Board class
...
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:14 +01:00
Frieder Schrempf
87567ab75a
variants: Wio WM1110: Use common implementation of startOTAUpdate()
...
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:44:13 +01:00
Frieder Schrempf
16029a47e8
variants: Nano G2 Ultra: Use common implementation of startOTAUpdate()
...
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:43:38 +01:00
Michael Boelen
66ffd04c57
Update faq.md
...
Fix of a typo, change second sentence to start with a capital (like Q 3.6), adding missing dot in 3.8, and turn 3.8 into a question.
The file on dev branch is outdated, so submitting this on main.
2026-01-08 15:20:05 +00:00
Liam Cottle
355df3cf01
Merge pull request #1337 from fmckeogh/dev
...
Fix capitalization in T1000-E manufacturer string
2026-01-08 23:31:10 +13:00
Scott Powell
f258b7e3b3
* ANON_REQ_TYPE_REGIONS now direct only, with reply_path encoded in request
2026-01-08 13:20:52 +11:00
Ferdia McKeogh
6301cddee2
Fix capitalization in T1000-E manufacturer string
2026-01-07 14:24:25 +01:00
Scott Powell
014a85dbf9
Merge branch 'dev' into regions-request
2026-01-08 00:21:08 +11:00
Liam Cottle
8db3918542
Merge pull request #1334 from olanwe/wifi-queuesize
...
Apply #1331 to other WiFi companions
2026-01-07 22:47:13 +13:00
ripplebiz
2a0de4a883
Merge pull request #1300 from fschrempf/fix-rak4631-gps
...
Fix RAK4631 GPS Detection
2026-01-07 14:56:58 +11:00
ripplebiz
c923442f6e
Merge pull request #1320 from alex-vg/dev
...
Add Xiao_S3_WIO WiFi companion env (Xiao_S3_WIO_companion_radio_wifi)
2026-01-07 14:37:32 +11:00
Oliver Weyhmüller
ea78110a3e
Apply #1331 to other WiFi companions
2026-01-07 03:40:00 +01:00
Liam Cottle
22cd7b88ca
Merge pull request #1331 from an0key/wifi-offlinequeuesizemissing
...
OFFLINE_QUEUE_SIZE for Heltec Wifi companions
2026-01-07 10:46:56 +13:00
Luke
2cf5753e64
OFFLINE_QUEUE_SIZE for Heltec Wifi companions
...
OFFLINE_QUEUE_SIZE missing from h3/h4 wifi companions, causing them only store 16 messages.
2026-01-06 14:49:15 +00:00
alex-vg
6a48ff0d99
variants: Xiao_S3_WIO: Add WiFi companion env
2026-01-05 02:25:30 +01:00
ViezeVingertjes
40a09e9450
Implement token bucket duty cycle enforcement
2026-01-04 21:33:46 +01:00
ripplebiz
70a5f0aeae
Merge pull request #1308 from liamcottle/fix/wifi-interface-frames
...
Fix: WiFi Interface Frame Parsing
2026-01-04 16:19:57 +11:00
liamcottle
6d7503ec2f
simplify reading frame header
2026-01-04 17:43:25 +13:00
ripplebiz
3cda9359a8
Merge pull request #1313 from recrof/thinknode_m6_companion_fix
...
fix compilation errors for m6 companion roles
2026-01-04 13:30:52 +11:00
Liam Cottle
629255d776
Merge pull request #1317 from cj-vana/fix/typos
...
Fix typos in README and source comments
2026-01-04 14:57:43 +13:00
cj-vana
03e0442a29
Fix typos in README and source comments
2026-01-03 18:54:48 -07:00
Rastislav Vysoky
4fa245593c
fix compilation errors for m6 companion roles
2026-01-03 16:32:36 +01:00
Liam Cottle
d265f5441a
Merge pull request #1310 from LitBomb/patch-22
...
fix Station G2 output dBm typo
2026-01-03 19:39:31 +13:00
uncle lit
05a8691b1b
fix Station G2 output dBm typo
...
fix Station G2 output dBm typo reported on https://github.com/meshcore-dev/MeshCore/issues/1304
changed 26.5 dBm to 36.5 dBm
2026-01-02 22:34:10 -08:00
liamcottle
d5b7c941ef
remove use of dynamic allocation
2026-01-03 16:36:19 +13:00
liamcottle
fe47a3a57c
implement frame header parising for wifi interface
2026-01-03 15:39:57 +13:00
Scott Powell
66f5e0aa5d
* Repeater: new anon request sub-type: ANON_REQ_TYPE_REGIONS (rate limited to max 4 every 3 mins)
...
* Companion: new CMD_SEND_ANON_REQ command (reply with existing RESP_CODE_SENT frame)
2026-01-03 12:02:15 +11:00
ripplebiz
8a08487c38
Merge pull request #1294 from liquidraver/factorynvsreset
...
Add NVS partition reset to ESP factory reset
2026-01-03 11:57:14 +11:00
liquidraver
c2d1d02b8e
ESP factory reset clear NVS too
2026-01-02 08:37:22 +01:00
Scott Powell
5f502b243c
* added protocol_guide doc
2026-01-02 12:54:57 +11:00
ripplebiz
8c2011ea46
Merge pull request #1299 from entr0p1/companion-timestamp-fix
...
BUGFIX: Companion packet timestamp mismatch trips replay protection
2026-01-02 12:44:45 +11:00
Frieder Schrempf
4f62831e73
EnvironmentSensorManager.cpp: Cleanup after failed RAK4631 GPS detection
...
If no GPS was detected, revert the hardware to the initial state,
otherwise we may see conflicts or increased power consumption on some
boards.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-31 14:42:42 +01:00
Frieder Schrempf
c22f312c78
EnvironmentSensorManager.cpp: Fix RAK4631 serial GPS detection
...
Serial1 is always true. If we want to check for the presence of a GPS
receiver, we need to check if any data was received.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-31 14:42:41 +01:00
Liam Cottle
8f74d92d7c
Merge pull request #1293 from weebl2000/gitignorevenv
...
Add common venv dirs to .gitignore
2026-01-01 01:29:55 +13:00
Wessel Nieboer
0b10c3ca99
Add venv dirs to .gitignore
2025-12-31 13:01:56 +01:00
ripplebiz
8797ec97c6
Merge pull request #1266 from IoTThinks/MCdev-Powersaving-for-esp32-202512
...
Added powersaving to all ESP32 boards with RTC-supported DIO1
2025-12-31 11:35:46 +11:00
entr0p1
a0baad8af9
BUGFIX: replay protection on repeaters tripped by timestamp sent from companion node mobile app. Send the node's RTC timestamp for TXT_TYPE_CLI_DATA messages instead of the timestamp from the app (matches the sendRequest() code logic).
2025-12-30 21:58:59 +11:00
Kevin Le
6e165a4fdc
Used esp_wifi_get_mode instead of WiFi.getMode() to reduce the code size
2025-12-29 22:38:05 +07:00
Kevin Le
9fd1a7818d
Added pad after powersaving_enabled
2025-12-29 21:49:13 +07:00
ripplebiz
2dfada7623
Merge pull request #1254 from entr0p1/tx-led-fix-v2
...
Fix TX LED stuck on when StartTransmit() fails
2025-12-29 16:09:08 +11:00
ripplebiz
2bf9abcbf6
Merge pull request #1274 from IoTThinks/MCdev-FixedMCUTemperature
...
To fix MCU Temperature for repeaters
2025-12-29 15:05:31 +11:00
ripplebiz
d429d31c69
Merge pull request #1260 from LitBomb/patch-21
...
Update FAQ with new community projects and tx power settings for amped radios
2025-12-29 13:44:38 +11:00
ripplebiz
c70eeaca09
Merge pull request #1247 from entr0p1/dev
...
Fixed T1000-E temperature, lux and BME280 sensor reading accuracies
2025-12-29 12:42:05 +11:00
Liam Cottle
e78345d4ce
Merge pull request #1281 from Meshcore-Portugal/jbrazio/promicro_rs232
...
Add RS232 bridge environment configuration for ProMicro
2025-12-29 12:57:00 +13:00
João Brázio
e2582f9a4e
Add RS232 bridge environment configuration for ProMicro
2025-12-28 20:04:57 +00:00
Scott Powell
ca6f8ce219
* check for 'early receive' ACK
2025-12-27 20:46:28 +11:00
Kevin Le
81d04c31d4
To get and average the temperature so it is more accurate, especially in low temperature
2025-12-27 15:25:21 +07:00
Kevin Le
a02b909c90
To fix the default temperature to be overridden by external sensors (if any)
2025-12-27 15:23:23 +07:00
Kevin Le
0a468c6a43
Fixed T-Beam board to work with sleep
2025-12-24 12:04:39 +07:00
Kevin Le
1a317cec52
Added extra check for P_LORA_DIO_1 before going to sleep
2025-12-24 11:47:19 +07:00
Kevin Le
694e4df659
Added powersaving_enabled sanitization
...
Moved powersaving_enabled to match serialization order
2025-12-24 11:23:19 +07:00
Kevin Le
0122903682
Modified hasPendingWork to return bool
2025-12-24 11:00:34 +07:00
Kevin Le
a1a7d10cae
Added powersaving to all ESP32 boards with RTC-supported DIO1
...
Added CLI to enable/disable powersaving
2025-12-23 12:48:08 +07:00
uncle lit
157f4dfb59
Update FAQ with new MeshCore applications and tx power settings for amped radios
...
Added entries for meshcore-pi and pyMC_Repeater to the FAQ
Added tx power settings for amped radios
2025-12-21 21:48:56 -08:00
entr0p1
fb46f1d866
Fix TX LED stuck on when StartTransmit() fails
2025-12-20 23:15:41 +11:00
entr0p1
2adc2b731b
EnvironmentSensorManager.cpp: Mitigate BME280 self-heating causing inaccurate readings.
2025-12-20 21:51:51 +11:00
entr0p1
dc0e4c6707
Fixed T1000-E temperature and lux sensors
2025-12-19 23:51:36 +11:00
Liam Cottle
189385b35e
Merge pull request #1203 from liquidraver/fix-gps-popup
...
Fix GPS/Buzzer toggle UI popup
2025-12-18 21:39:25 +13:00
liquidraver
709d5ff3e6
move showalert after saveprefs
2025-12-17 21:27:22 +01:00
fdlamotte
ba79bed684
Merge pull request #1235 from liquidraver/btfixv7
...
queue throttling + slave latency and minor refactor
2025-12-17 15:08:20 +01:00
liquidraver
26d3849281
queue throttling + slave latency and minor refactor
2025-12-17 13:46:58 +01:00
fdlamotte
de1b05d424
Merge pull request #1201 from fschrempf/nrf52-board-deduplication
...
NRF52 Board Code Deduplication
2025-12-17 11:29:33 +01:00
Frieder Schrempf
e8d7d48b4d
variants: RAK4631: Enable DC/DC regulator to reduce power consumption
...
The RAK4631/RAK4630 module are able to use the DC/DC converter. Enable
it to reduce power consumption.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:39:55 +01:00
Frieder Schrempf
e18f6542e8
NRF52Board.h: Mark getMCUTemperature() as virtual
...
The function in the derived class is virtual per definition. Mark it
to make this clearer to the reader.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:39:54 +01:00
Frieder Schrempf
6a06a12476
Deduplicate NRF52 startOTAUpdate()
...
The startOTAUpdate() is the same for all NRF52 boards. Use a common
implementation for all boards that currently have a specific
implementation.
The following boards currently have an empty startOTAUpdate() for
whatever reasons and therefore are not inheriting NRF52BoardOTA to
keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E,
Wio WM1110.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:30:50 +01:00
Frieder Schrempf
e75ae46f4e
Deduplicate DC/DC regulator enable for NRF52 boards
...
Some NRF52 boards are able to use the internal power-efficient DC/DC
regulator. Add a new class that can be inherited by board classes to
enable this feature and reduce the power consumption.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:29:14 +01:00
Frieder Schrempf
b9958e1c99
Use common NRF52 begin() and deduplicate() startup reason init
...
Use a common begin() method that can be called from derived classes
to contain the shared initialization code.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:26:57 +01:00
Frieder Schrempf
2f79f3b03d
Deduplicate reboot() for NRF52 boards
...
The reboot() method is the same for all NRF52 boards. Use a shared
implementation.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:25:16 +01:00
Frieder Schrempf
7730e97b77
variants: IkokaNrf52Board: Use NRF52Board base class
...
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:22:15 +01:00
ripplebiz
d8851b7bf4
Merge pull request #1206 from IoTThinks/MCdev-MCUTemperature-for-repeaters-202512
...
Added default temperature from ESP32 MCU and NRF52 MCU
2025-12-15 19:37:34 +11:00
Liam Cottle
166184e356
Merge pull request #1216 from mattzzw/main
...
Update faq.md
2025-12-15 18:18:00 +13:00
mattzzw
28b2c79f91
Update faq.md
...
Fix typo
2025-12-14 18:29:49 +01:00
fdlamotte
8bc7fd81b1
Merge pull request #1142 from Meshcore-Portugal/jbrazio/2025_7bc6ab2c
...
Add devcontainer configuration for vscode
2025-12-13 09:07:05 +01:00
Kevin Le
4231fcf5aa
Fixed to call getMCUTemperature once.
2025-12-13 07:32:26 +07:00
João Brázio
7a9c8bc7fe
Refactor devcontainer runArgs
2025-12-12 17:24:28 +00:00
Florent
703b927d8f
Merge branch 'thinknode_m3_port' into dev
2025-12-12 17:20:06 +01:00
Florent
13b9d394ef
thinknode_m3: initial commit
2025-12-12 17:16:28 +01:00
Florent
8c44843a1f
Merge branch 'thinknode_m6_port' into dev
2025-12-12 16:39:37 +01:00
Florent
2fe142b00c
thinknode_m6: initial port
2025-12-12 16:37:57 +01:00
Kevin Le
2c47d417d9
Added default temperature from ESP32 MCU and NRF52 MCU
...
Added NRF52Board.h and NRF52Board.cpp
Modified NRF52 variants to extend from NRF52Board to share common feature
2025-12-12 19:01:15 +07:00
ripplebiz
6179ace613
Merge pull request #1160 from flol/rak11310
...
Support for RAK11310 WisBlock
2025-12-11 10:47:12 +11:00
ripplebiz
2a9c0ca6bd
Merge pull request #1171 from luigi311/techo_hibernate_led
...
variants: lilygo_techo: variant: Turn off leds on poweroff
2025-12-11 10:24:05 +11:00
ripplebiz
c281c118c0
Merge pull request #1192 from LitBomb/patch-20
...
Update faq.md
2025-12-11 10:21:19 +11:00
ripplebiz
0d43e3a138
Merge pull request #1197 from agessaman/LPS22HB-fix
...
fix output from LPS22HB sensor: convert barometric pressure from kPa to hPa
2025-12-11 10:14:10 +11:00
agessaman
8bbe363e46
fix output from LPS22HB: convert barometric pressure from kPa to hPa in EnvironmentSensorManager
2025-12-08 19:53:33 -08:00
uncle lit
35c1a439b9
Update faq.md
...
fix typo bugs found by @4np
2025-12-08 09:33:10 -08:00
uncle lit
0d55b98324
Update faq.md
...
add get and set prv.key
add web site to generate new private key and specific its public key's first byte value
add link to repeater observer instruction
add links to The Comms Channel's meshcore video, MCarper's Meshcore Advantages, and Austin Mesh's MeshCore vs Meshtastic comparison
add deafness instruction for agc reset interval
add reference to Liam's Windows and Intel Mac client apps
add reference to Tree's Meshcore packet decoder
add OTA BLE update addendum for Seeed Wio Tracker L1 Pro
add instruction to use T-deck's software keyboard to enter `=` at the end of the base64 public key
2025-12-07 22:31:54 -08:00
Liam Cottle
439406488f
Merge pull request #1178 from fschrempf/xiao-nrf-button-pullup-fix
...
Xiao NRF52: Enable pullup on button input
2025-12-07 19:18:48 +13:00
Scott Powell
1e143e0274
* refactor: on-demand getSharedSecret()
2025-12-06 19:17:45 +11:00
ripplebiz
7411c07a2b
Merge pull request #1180 from oltaco/shared-secret-on-demand
...
Companion: Faster startup by calculating shared_secret on demand
2025-12-06 18:59:19 +11:00
Scott Powell
30164ba42b
* LPPDataHelpers, readCurrent() signed value
2025-12-06 16:49:25 +11:00
taco
3e03f0b123
calculate shared_secret on demand
2025-12-06 16:21:17 +11:00
ripplebiz
ec59d909d6
Merge pull request #1177 from liquidraver/btfixv6
...
Fix BLE semaphore leak and improve SerialBLEInterface
2025-12-06 14:23:27 +11:00
ripplebiz
a74bec9b1a
Merge pull request #1179 from carroarmato0/tdeck-gps
...
Enable GPS for LilyGo TDeck + Optimizations
2025-12-06 14:11:58 +11:00
Christophe Vanlancker
ec6ddb48ca
fix(core): optimize GPS loop and add display GPIO safeguards
2025-12-05 20:45:10 +01:00
Christophe Vanlancker
61031fc1d5
feat(tdeck): enable GPS support and configure pins
2025-12-05 20:44:56 +01:00
Frieder Schrempf
3a856bf8eb
variants: XIAO NRF52: Enable button pullup
...
Some versions of the Wio-SX1262 board don't have the button and the
pullup resistor populated. Enable the internal pullup to prevent
a floating pin and spurious button presses on those boards.
This fixes #1173 .
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-05 12:40:12 +01:00
liquidraver
ebe6618b48
Improve SerialBLEInterface
2025-12-05 07:39:48 +01:00
Florent de Lamotte
447659a8bc
tracker_l1: enable dc/dc converter
2025-12-04 12:01:00 +01:00
0778ab3795
Fix BLE semaphore leak in Bluefruit library
...
Patches Bluefruit library to fix semaphore leak bug that causes device lockup
when BLE central disconnects unexpectedly (e.g., going out of range, supervision timeout).
Co-authored-by: Liam Cottle <liamcottle@users.noreply.github.com >
Co-authored-by: oltaco <oltaco@users.noreply.github.com >
2025-12-04 11:47:41 +01:00
fdlamotte
6fa1636928
Merge pull request #1057 from liquidraver/wiodev
...
Disable screen switching on when connected
2025-12-04 11:10:51 +01:00
Luis Garcia
35d2324af0
variants: lilygo_techo: variant: Turn off leds on poweroff
...
Signed-off-by: Luis Garcia <git@luigi311.com >
2025-12-03 19:30:47 -07:00
ripplebiz
88dadbb49a
Merge pull request #1172 from oltaco/nrf52-power-changes
...
NRF52 Power related changes
2025-12-03 17:50:15 +11:00
taco
7a6169160e
fix DC/DC enable for boards which currently have it.
...
this fixes how the reg1 dc/dc converter is enabled on WisMesh Tag / T1000e / WM1110 and Xiao NRF52
2025-12-03 15:59:59 +11:00
taco
67b9e457b4
remove calls to sd_power_mode_set(NRF_POWER_MODE_LOWPWR);
...
this is the default mode, there is no need to call it unless previously changing it.
2025-12-03 15:59:59 +11:00
ripplebiz
ba5b9cb38c
Merge pull request #996 from mattzzw/dev
...
Add display of IP address to companion screen
2025-12-03 13:52:48 +11:00
ripplebiz
ebb0ee2020
Merge pull request #1039 from ViezeVingertjes/feat/support-nibble-screen-connect
...
Add ESP32-S3-Zero board configuration and Nibble Screen Connect variant
2025-12-03 13:49:51 +11:00
ripplebiz
c892ae2a37
Merge pull request #1169 from Meshcore-Portugal/jbrazio/2025_db83f76e
...
Bridge: Fix RAK4631 GPS conflict and add T114 RS232 targets
2025-12-03 13:43:19 +11:00
ripplebiz
5c328d1345
Merge pull request #1156 from csrutil/persist-gps
...
Persist GPS enabled state to preferences
2025-12-02 21:50:21 +11:00
João Brázio
5382f72fec
Bridge: Add t114 rs232 targets
2025-12-02 10:31:24 +00:00
João Brázio
e83301bcde
Bridge: Fix RAK4631 serial2 GPS conflict
2025-12-02 10:30:45 +00:00
Florian Lippert
da7363313b
Support for RAK11310 WisBlock
2025-12-01 21:29:03 +01:00
Florent
548ff6279d
thinknode_m5: fix repeater build
2025-12-01 09:40:02 +01:00
ripplebiz
ffffbd67b6
Merge pull request #1162 from recrof/led_state_fix
...
add default LED_STATE_ON for boards that don't have it defined
2025-11-30 21:09:01 +11:00
Rastislav Vysoky
ac46f03455
add default LED_STATE_ON for boards that don't have it defined
2025-11-30 10:52:33 +01:00
Scott Powell
f31ee17a5b
Merge branch 'dev'
2025-11-30 18:32:49 +11:00
Scott Powell
dbce6c55fa
* ver 1.11.0
2025-11-30 18:32:10 +11:00
csrutil
64f37acd54
CMD_SET_CUSTOM_VAR will update gps and gps_interval
2025-11-30 09:45:56 +08:00
csrutil
28d9a205c6
_location->loop() should be in the next tick
2025-11-29 20:29:52 +08:00
csrutil
49703229b4
changed ms to sec
2025-11-29 19:02:00 +08:00
csrutil
4f6c16440a
move GPS preference initialization to UITask
2025-11-29 18:35:34 +08:00
csrutil
39a60decb2
fixed gps init value
2025-11-29 18:02:08 +08:00
csrutil
751bcc966d
add GPS interval validation and bounds checking
2025-11-29 17:30:13 +08:00
csrutil
1d9144818e
add configurable GPS update interval
...
Make GPS update interval configurable via settings instead of using hardcoded 1 second value. The interval is persisted from preferences and can be adjusted at runtime through the sensor manager settings interface
2025-11-29 17:20:21 +08:00
csrutil
5dbb91b80a
https://github.com/meshcore-dev/MeshCore/issues/989 - persist GPS enabled state to preferences
...
Add GPS configuration to NodePrefs structure and persist the GPS
enabled state when toggled via UI. This ensures GPS settings are
retained across device restarts.
2025-11-29 16:37:23 +08:00
ripplebiz
729509853f
Merge pull request #1153 from fdlamotte/thinknode_m5
...
Thinknode m5 support
2025-11-29 12:13:30 +11:00
Florent
d3c4547f4d
thinknode_m5: gps support
2025-11-28 13:15:11 +01:00
Florent
25658a2e75
thinknode_m5: manage baclight
2025-11-28 10:33:19 +01:00
Florent
965b6745bc
thinknode_m5: tx_led
2025-11-28 09:57:58 +01:00
Florent
1a085e9617
thinknode_m5: add pca9557 expander
2025-11-27 22:55:21 +01:00
Florent
e21accfcda
thinknode_m5: initial port
2025-11-27 21:49:04 +01:00
Scott Powell
d81bacd3d1
Merge branch 'dev' into ext-trace
2025-11-27 23:22:06 +11:00
Scott Powell
d1f1c2e15b
Revert "add heltec_v4 tft expansion box"
...
This reverts commit 456c86795d .
2025-11-27 21:34:52 +11:00
Scott Powell
b15826d9b7
Merge branch 'dev' into ext-trace
2025-11-27 19:31:03 +11:00
ripplebiz
f48c01cb5c
Merge pull request #1148 from Meshcore-Portugal/jbrazio/2025_6d9681e2
...
Add RAK4631 support for rs232 bridge
2025-11-27 17:01:30 +11:00
ripplebiz
dc5af6cdd0
Merge pull request #1082 from KR4DIO/dev
...
Ikoka Handheld variant
2025-11-27 16:12:22 +11:00
ripplebiz
c773b33ab3
Merge pull request #1130 from zaquaz/buzzer-feature-pr
...
Added buzzer config persistance across restart
2025-11-27 16:04:44 +11:00
zaquaz
bc16956de2
Remove default setting, since it is handled in MyMesh
2025-11-26 18:37:56 -08:00
ripplebiz
93b50288f1
Merge pull request #1150 from recrof/heltec_build_fixes
...
fix building issues with heltec wireless paper and heltec tracker
2025-11-26 22:18:23 +11:00
ripplebiz
b2009e8964
Merge pull request #1151 from recrof/m2_fixes
...
ThinkNode M2: build fix
2025-11-26 22:17:17 +11:00
ripplebiz
bed7b0404f
Merge pull request #1122 from fschrempf/xiao-nrf-ui-and-power-optimizations
...
Companion Power Optimizations and UI Support for XIAO NRF52
2025-11-26 22:11:02 +11:00
Rastislav Vysoky
7950264fd5
added missing NonBlockingRTTTL dependency, added USB and WIFI companions
2025-11-25 19:45:51 +01:00
Rastislav Vysoky
8ca86b9a71
fix building issues with heltec wireless paper and heltec tracker
2025-11-25 19:41:01 +01:00
João Brázio
d974d6b37d
Rename RS232 bridge environments and update build flags for Serial1 and Serial2
2025-11-25 16:19:28 +00:00
João Brázio
642e06361b
Add RAK4631 support for rs232 bridge
2025-11-25 11:53:21 +00:00
ripplebiz
a326bb5112
Merge pull request #1104 from zjs81/Fix-BW-setting-and-returning
...
Refactor float conversion in CommonCLI
2025-11-25 22:32:35 +11:00
ripplebiz
ed298e63b5
Merge pull request #1118 from Quency-D/dev-heltec-v4-tft
...
add heltec_v4 tft expansion box
2025-11-25 22:18:05 +11:00
ripplebiz
de4aeebb1e
Merge pull request #1131 from wel97459/dev-uint
...
Changed uint used in flags to uint8_t
2025-11-25 21:51:36 +11:00
Scott Powell
358e55ec87
Merge branch 'dev' into ext-trace
2025-11-25 15:17:48 +11:00
Scott Powell
d8ffd816e7
* BUG FIX: remote login fix same as repeater
2025-11-25 15:12:48 +11:00
Scott Powell
bcb3007a97
* BUG FIX: same remote login fix as repeater
2025-11-25 15:09:51 +11:00
Scott Powell
5e9c44e743
* BUG FIX: repeater remote admin, flood login should invalidate the client->out_path
2025-11-24 22:56:55 +11:00
ripplebiz
b2290054c4
Merge pull request #1075 from agessaman/companion-stats
...
Add statistics commands to return device metrics on companions
2025-11-24 12:34:35 +11:00
João Brázio
b9e5fd2844
Add devcontainer configuration for vscode
2025-11-23 14:25:38 +00:00
Brad Ferguson
97f363c36b
Merge branch 'meshcore-dev:dev' into dev
2025-11-22 23:48:01 -06:00
Frieder Schrempf
4bf8202594
variants: Heltec T114: Enable DC/DC regulator
...
According to the documentation and experiments on other boards using
NRF52 + SX1262 this reduces the power consumption significantly.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:12 +01:00
Jaroslav Škarvada
aa874749b7
variants: Heltec T114: Disable LED and GPS when powering off
...
This should reduce power consumption in hibernation.
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com >
2025-11-22 15:05:11 +01:00
Frieder Schrempf
42cfacd283
variants: XIAO NRF52: Enable status LED
...
Fix the active state of the LEDs (active low) and enable the status
LED.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:09 +01:00
Frieder Schrempf
2f20cb73ef
companion: ui: Respect LED_STATE_ON for status LED
...
The current logic only works for active high LEDs. Some boards need
an active low level control and therefore they set LED_STATE_ON to 0.
Take this into account and use the correct LED pattern for both cases.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:08 +01:00
Frieder Schrempf
921d1c1c6a
variants: XIAO NRF52: Support power-off via user button
...
Add the necessary code to properly power-off the Xiao + Wio
companions. This way we can achieve around 15 microamps of power
consumption in the off state.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:07 +01:00
Frieder Schrempf
514b22dee9
variants: XIAO NRF52: Enable user button
...
The Xiao nRF52840 combined with the Wio-SX1262 is often used for
cheap and compact DIY companion nodes. The Wio actually has an onboard
pushbutton that can be used as user button. Enable support for the
button.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:06 +01:00
Frieder Schrempf
4f8054e7ec
variants: XIAO NRF52: Enable DC/DC regulator
...
This reduces the power consumption by approximately 25%.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:05 +01:00
Frieder Schrempf
eadfa8de5b
variants: WisMesh Tag: Enable status LED
...
Use the blue LED as status LED. This prevents the blue LED from
being always-on and draining the battery. Instead use it as status
LED with blink patterns as other companion devices do.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:04 +01:00
Frieder Schrempf
be5ac4fe6b
variants: WisMesh Tag: Enable DC/DC regulator
...
According to the documentation and experiments on other boards using
NRF52 + SX1262 this reduces the power consumption significantly. This
assumes that the hardware actually has the inductor for the internal
DC/DC regulator populated which is very likely. Even if not, it won't
hurt.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:02 +01:00
Jaroslav Škarvada
fe6cea2c15
companion: Suspend radio when hibernating
...
This should significantly reduce power consumption in hibernation.
Fixes : #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com >
Signed-off-by: Frieder Schrempf <frieder@fris.de > # generalize for all radios and UIs
2025-11-22 15:05:01 +01:00
ripplebiz
393bcba717
Merge pull request #1133 from oltaco/repeater-adc-multiplier-setting
...
Feature: configurable adc.multiplier for repeaters
2025-11-22 14:50:23 +11:00
taco
f5e8ab74f5
tweaks get/set adcMultiplier logic
2025-11-21 23:44:17 +11:00
taco
ed4178fa96
add board.setAdcMultiplier to room server and sensor
2025-11-21 21:46:55 +11:00
ripplebiz
52fc0d3dc2
Merge pull request #1127 from oltaco/rename-faketec-to-promicro
...
Rename Faketec to ProMicro
2025-11-21 19:40:31 +11:00
taco
da55ff8936
Repeater: add adc.multiplier setting
2025-11-21 18:15:30 +11:00
taco
773baf63c6
rename adverts
2025-11-21 17:57:49 +11:00
Winston Lowe
0c4e3b7e59
Changed uint to a uint8_t
2025-11-20 21:58:42 -08:00
Scott Powell
edca616725
* proposal for 'Extended Trace' packets. Using 'flags' byte, lower 2 bits, for path hash size.
2025-11-21 15:44:31 +11:00
zaquaz
309f58710c
Added buzzer config persistance accross restart
2025-11-20 19:02:32 -08:00
taco
a2b5a2bed1
rename faketec to promicro
2025-11-21 12:48:33 +11:00
ripplebiz
5db55d34a9
Merge pull request #1113 from recrof/bme280_fix
...
fix: make bme280 sensor usable again
2025-11-19 15:39:48 +11:00
Quency-D
456c86795d
add heltec_v4 tft expansion box
2025-11-19 11:43:52 +08:00
recrof
c067704bb1
fix: move bme680 detection before bme280
2025-11-18 15:36:25 +01:00
agessaman
e2cec1016a
Modify CMD_GET_STATS with sub-types for core, radio, and packet statistics. Consolidated to a single RESP_CODE_STATS with a second byte to identify response structure. Updated documentation and examples to reflect the new command structure and response parsing.
2025-11-17 09:57:36 -08:00
ripplebiz
6b9396b91b
Merge pull request #1092 from liquidraver/rakgps
...
Fix RAK4631 GPS UART pin macros for L76K to work
2025-11-17 14:04:09 +11:00
ripplebiz
13defac19a
Merge pull request #1106 from oltaco/keepteen-lt1
...
Add support for Keepteen LT1
2025-11-17 13:50:16 +11:00
Florent
21ee8609b7
xiao_s3: relocate serial pins on repeater_bridge_rs232
...
* conflicts with i2c pins that are documented on the same pins
* this is a commented target
2025-11-16 17:07:33 +01:00
Florent
c59d40114f
xiao_s3: use environment sensor manager and add sensor role
2025-11-16 16:55:16 +01:00
taco
499c2ea326
Keepteen LT1: remove terminal_chat and sensor targets
2025-11-16 16:17:11 +11:00
taco
767c7007aa
initial support: Keepteen LT1
2025-11-16 15:55:49 +11:00
zach
a495c43731
Refactor float conversion in CommonCLI to use strtof for improved precision and add ftoa3 function for formatting floats with three decimal places in TxtDataHelpers to fix display issue in app and repeater config ui in web
...
REPO:
1. Flash a repeater
2. Connect over lora
3. Set bw to 42.7 KHZ
It will revert back due to converting a double to a float.
REPO2:
1.Flash Repeater
2. Apply float fix
3. Set to say 20.8
4. try to get value via app or web cli repeater config
It wil show blank because it doesnt return a good value. It would be something like 20.7999992 which the app and web apps dont like so the ftoa3 rounds it and returns a 3 decimal point float
2025-11-14 21:51:28 -07:00
ripplebiz
d80068e8ae
Merge pull request #1071 from tpp-at-idx/thinknode_m2
...
Thinknode_M2: better battery reading accuracy and no display on powerup fix
2025-11-14 15:11:06 +11:00
ripplebiz
9fb8ccf871
Merge pull request #985 from liquidraver/dev3
...
Fix reversed GPS PINs on G2 and enable timesync
2025-11-14 14:34:23 +11:00
ripplebiz
b5eb82fc41
Merge pull request #1035 from liquidraver/devt114
...
Add Heltec T114 GPS + timesync
2025-11-14 14:33:05 +11:00
Liam Cottle
6799578cc6
Merge pull request #1100 from stphnrdmr/dev
...
Allow SF smaller than 7 to be saved
2025-11-14 12:15:10 +13:00
Stephan Rodemeier
822052cdca
Allow SF smaller than 7 to be saved
2025-11-13 22:25:55 +01:00
Brad Ferguson
5c91b1f2ab
Merge branch 'meshcore-dev:dev' into dev
2025-11-13 14:52:02 -06:00
Scott Powell
c012a5d176
Merge branch 'dev'
...
# Conflicts:
# docs/payloads.md
2025-11-13 20:47:52 +11:00
Scott Powell
f54d819269
* ver 1.10.0
2025-11-13 20:45:38 +11:00
fdlamotte
19633ffcbf
Update library.json to latest libs and version
2025-11-13 10:39:20 +01:00
fdlamotte
aa4e374a07
Update README.md (RAK boards don't need pio patch)
2025-11-12 16:14:57 +01:00
ripplebiz
3ad1cafed2
Merge pull request #1064 from recrof/esp_contacts_350_channels_40
...
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-12 00:49:05 +11:00
ripplebiz
8e30aa6c7c
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
liquidraver
f1c4fa8444
Fix RAK4631 GPS UART pin macros
2025-11-11 13:00:27 +01:00
Florent
eb7d93ff91
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
0e95b123d8
* Sensor: DISCOVER_REQ, prefix_only support
2025-11-11 20:08:05 +11:00
ripplebiz
b62e845c28
Merge pull request #1068 from fdlamotte/sensor_control_data
...
sensor: copy control data code from repeater
2025-11-11 20:03:33 +11:00
agessaman
bea41fe646
Remove unused statistics formatting methods and associated header includes from MyMesh class. Whoops.
2025-11-09 11:39:47 -08:00
agessaman
723f875c03
Update statistics handling to use binary frames instead of JSON formatting for consistency with other companion commands. Added documentation of frame structure with code examples.
2025-11-09 11:28:49 -08:00
agessaman
1959e3d5d1
Reverted MyMesh constructor for simplicity.
...
Updated formatStatsReply method to use new member variables for statistics handling.
Removed excess variable creation
2025-11-09 11:28:49 -08:00
agessaman
6ddc73fff4
Add statistics commands and response handling in MyMesh
...
- Introduced new commands for retrieving statistics: CMD_GET_STATS_CORE, CMD_GET_STATS_RADIO, and CMD_GET_STATS_PACKETS.
- Implemented corresponding response handling methods to format and send statistics data.
- Updated MyMesh constructor to initialize new member variables for managing statistics.
- Included StatsFormatHelper for formatting statistics replies.
2025-11-09 11:28:49 -08:00
Scott Powell
cf3da818b8
* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.
2025-11-09 16:36:23 +11:00
Scott Powell
ae53d372a2
* added StrHelper::fromHex()
2025-11-09 16:17:49 +11:00
brad
057bb9cd85
add variant files for ikoka handheld (nrf52 with e22 radio)
2025-11-08 20:05:46 -06:00
Tomas P
74f7f7e93e
Fix for display not coming on after poweron
2025-11-07 09:50:21 +01:00
Tomas P
a5e88f6d15
tweak getBattMilliVolts to report battery more accurately
2025-11-07 09:48:57 +01:00
Tomas P
be0ab402f7
change ADC_MULTIPLIER to better reflect battery voltage
2025-11-07 09:47:18 +01:00
Scott Powell
4b2a2e1ed3
* repeater, DISCOVER_REQ, flags lowest bit now for 'prefix_only' responses
2025-11-07 19:31:09 +11:00
Scott Powell
61a0cb42d2
* packet format docs updated
2025-11-07 15:49:01 +11:00
Scott Powell
990aad6bac
Merge branch 'transportcodes' into dev
2025-11-07 14:52:11 +11:00
Scott Powell
1d12bc116d
* repeater: various "region" CLI changes
...
* transport codes 0000 and FFFF reserved
2025-11-07 14:42:06 +11:00
Florent
fc6fe7c6ba
sensor: copy control data code from repeater
2025-11-06 22:36:37 +01:00
Scott Powell
96ed2a69f8
* companion: protocol ver bumped to 8.
2025-11-06 22:51:17 +11:00
Scott Powell
7a04e7fcd1
* companion: added CMD_SEND_CONTROL_DATA, and PUSH_CODE_CONTROL_DATA
2025-11-06 22:10:20 +11:00
Scott Powell
7058462f40
* repeater: CLI, added "region put" and "region remove" commands
2025-11-06 21:40:52 +11:00
Scott Powell
bc98f96028
* repeater: onAnonDataRecv(), future code check bug fix (offset 4)
...
* sensor: onAnonDataRecv(), future request code provision
2025-11-06 20:22:40 +11:00
Scott Powell
d6c1f0678c
* repeater: onAnonDataRecv(), now rejecting non-ASCII password (preparing for future request codes)
...
* repeater: DISCOVER requests now with a simple RateLimiter (max 4, every 2 minutes)
2025-11-06 20:15:01 +11:00
Scott Powell
b9e9456535
* RegionMap: get/set Home Region
...
* repeater: admin CLI, changed "allowf *", "denyf *", added "home"
2025-11-06 17:28:45 +11:00
ripplebiz
84058631aa
Merge pull request #1038 from adam2872/Analogue-button-fix-for-new-UI
...
Analogue user button fix for new UI
2025-11-06 15:41:45 +11:00
ripplebiz
d3c73ebea7
Merge pull request #1058 from dotdavid/dev
...
Fix Xiao S3 WIO board name
2025-11-06 13:45:12 +11:00
Scott Powell
92b50f9cec
* region filtering now applied in allowPacketForward()
2025-11-06 12:27:25 +11:00
Scott Powell
778c2bfe9f
* new PAYLOAD_TYPE_CONTROL (11)
...
* repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only)
* node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )
2025-11-06 00:56:54 +11:00
Scott Powell
2602c80004
* is_name_char() bug fix
2025-11-05 15:34:23 +11:00
Scott Powell
11fdf82162
* companion: new CMD_SET_FLOOD_SCOPE (54)
2025-11-05 14:56:18 +11:00
Scott Powell
fc909dfc24
* RegionMap: inverted 'flags' to _deny_ bits
...
* Mesh: new filterRecvFloodPacket() for overriding
* repeater CLI: 'allow' -> 'allowf' or 'denyf'
2025-11-05 14:34:44 +11:00
recrof
13af2f5d11
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-04 23:58:32 +01:00
David Hall
a3a3d70fb9
Fix manufacturer name on Seeed Xiao S3 WIO
2025-11-03 21:02:08 +00:00
David Hall
37ead53b1d
Fix manufacturer name on Seeed Xiao S3 WIO
2025-11-03 21:00:43 +00:00
liquidraver
81b92e28e0
even less comments \o/
2025-11-03 21:41:11 +01:00
liquidraver
bb213b5eff
less unnecessary comments, less lines of code :)
2025-11-03 21:39:35 +01:00
liquidraver
4887e818bd
stop OLED powering on every message if connected to phone
2025-11-03 21:25:31 +01:00
Scott Powell
47a74f6a12
* Mesh: new sendFlood() overload with transport codes.
...
* BaseChatMesh: sendFloodScoped(), for overriding with some outbound 'scope' / TransportKey
* companion: new 'send_scope' variable.
2025-11-04 01:21:56 +11:00
Scott Powell
255b82c3a6
* new CLI commands: region, region load, region save, region get, region allow
2025-11-03 22:53:14 +11:00
Scott Powell
5798821751
* misc RegionMap and key store methods
2025-11-03 18:14:44 +11:00
Scott Powell
aae68a5591
* setting up framework for Regions, TransportKeys, etc
2025-11-03 14:23:32 +11:00
ripplebiz
0ef29fc670
Merge pull request #889 from fdlamotte/sensecap_indicator
...
Sensecap indicator
2025-11-03 11:09:17 +11:00
ripplebiz
e9690afe91
Merge pull request #998 from tahnok/bmp085-sensor
...
Add support for bmp085/bmp180 temperature/pressure sensor
2025-11-03 10:58:22 +11:00
Liam Cottle
ee908ddec5
Merge pull request #1047 from aqua/build-name-fix
...
Fix the sample RAK repeater build target name
2025-11-01 19:19:49 +13:00
Devin Carraway
a3a6147f63
Fix the sample RAK repeater build target name
...
The actual target doesn't capitalize the 'r' in repeater.
2025-10-31 22:11:24 -07:00
ViezeVingertjes
d3bad11f51
Add ESP32-S3-Zero board configuration and Nibble Screen Connect variant
2025-10-31 14:42:16 +01:00
Adam Mealings
612cff8b33
Analogue button delay based on millis
2025-10-31 13:04:59 +00:00
Scott Powell
ff07bbc2ad
* Companion: Now using transport codes { 0, 0 } when Share contact zero hop.
...
* Repeater: onAdvertRecv(), adverts via Share now NOT added to neighbours table
2025-10-31 20:40:22 +11:00
ripplebiz
753ebe4878
Merge pull request #1036 from oltaco/datastore-refactor
...
Refactor DataStore to use openRead() and openWrite()
2025-10-31 17:10:03 +11:00
ripplebiz
cdf9df3956
Merge pull request #982 from ViezeVingertjes/feat/wio-wm1110-variant
...
Add Seeed Wio WM1110 Dev Board variant
2025-10-31 17:02:47 +11:00
ripplebiz
8f3ba9a9f2
Merge pull request #993 from recrof/allow_lower_bw_sf
...
allow saving spreading factor from 5 and bandwidth from 7.8kHz
2025-10-31 16:58:35 +11:00
Scott Powell
cb00823dc5
* Upping max channel hash conflicts to 4 (was 2)
2025-10-31 16:54:58 +11:00
taco
ac6c13cc5d
revert pubBlobByKey() change
2025-10-31 15:06:29 +11:00
taco
3bae0e083c
refactor DataStore to use openRead() and openWrite()
...
refactored loadPrefsInt(), loadContacts(), loadChannels(), getBlobByKey() and putBlobByKey() to use openRead() and openWrite()
2025-10-31 13:17:22 +11:00
ViezeVingertjes
5d20834a0f
Update Wio WM1110 configuration to disable GPS and clean up location provider code
2025-10-30 16:33:02 +01:00
liquidraver
998ebdf504
Merge branch 'dev' into devt114
2025-10-30 10:10:06 +01:00
Scott Powell
116a432946
* FIX: for divide by zero crash
2025-10-30 19:11:04 +11:00
liquidraver
70ee47bc47
t114 gps
2025-10-30 08:35:01 +01:00
Scott Powell
7ff483ab74
* Fix for VolatileRTCClock wrapping around to initial synced time every 49 days
2025-10-30 16:45:50 +11:00
ripplebiz
ff55635d59
Merge pull request #1023 from WattleFoxxo/dev
...
Update xiao rp2040 to use new radio standard init
2025-10-30 12:43:20 +11:00
Scott Powell
28ca26f691
* direct.txdelay default now 0.2 (was zero)
2025-10-30 00:03:10 +11:00
Scott Powell
3fdbd23ccb
Merge commit 'c4561c938e2accaed86eb63c42274e8fee97c165' into dev
2025-10-29 23:36:07 +11:00
Scott Powell
48fe67067c
* experimental: retransmit delay, removing the 6 'slots'
2025-10-29 23:35:46 +11:00
ripplebiz
c4561c938e
Merge pull request #1026 from recrof/disable_esp32c6
...
esp32c6: disable releases because of issues with pioarduino(arduino 3.0)
2025-10-29 23:29:06 +11:00
ripplebiz
0d1549a47e
Merge pull request #1025 from recrof/disable_vision_master
...
heltec vision master: remove boards from build process
2025-10-29 23:28:26 +11:00
recrof
175016caa4
missed one definition
2025-10-29 13:27:26 +01:00
recrof
579da332ff
renamed esp32c6 variants, so they are not included in release. added disclaimer about pioarduino builds
2025-10-29 13:22:11 +01:00
recrof
3f921a9482
use different strategy in renaming the envs in order to avoid building
2025-10-29 13:14:27 +01:00
recrof
fda42a58ba
remove vision master boards because of issues with display drivers
2025-10-29 10:32:39 +01:00
fdlamotte
52731c3da2
Merge pull request #900 from michaelhart/dev
...
Add stats to serial CLI
2025-10-29 08:50:17 +01:00
Michael Hart
ed9f003c33
Adds serial commands to get stats
...
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
2025-10-28 23:55:49 -07:00
WattleFoxxo
00e8a78c06
Switch xiao rp2040 to std init
2025-10-29 15:20:31 +11:00
Matthias Wientapper
766c96f55e
* Add #ifdef, reuse variable
2025-10-27 17:58:29 +01:00
ripplebiz
e8d14b2057
Merge pull request #977 from tpp-at-idx/thinknode_m2
...
Support for Elecrow Thinknode M2
2025-10-27 13:31:09 +11:00
ripplebiz
1c9e21ce9f
Merge pull request #1000 from kallanreed/enable_wismesh_tag_gps
...
Add PIN_GPS_EN build flag for wismesh tag companion
2025-10-26 15:36:48 +11:00
ripplebiz
97b221cf1c
Merge pull request #1018 from Woodie-07/dev
...
LR1110 IRQ fixes
2025-10-26 14:54:27 +11:00
Woodie-07
aaf1fae063
lr1110 irq fixes
...
fix incorrect irqs used in isReceiving. also remove getTimeOnAir override as fixed upstream
2025-10-25 22:12:30 +01:00
fdlamotte
18e5c07d36
Merge pull request #1012 from Woodie-07/dev
...
New workaround for LR1110 shift issue
2025-10-25 09:14:11 +02:00
Woodie-07
dfa10cdbd4
new workaround
2025-10-24 20:12:02 +01:00
ripplebiz
e50fd7df84
Merge pull request #1003 from liamcottle/feature/increased-max-uptime
...
Increase max uptime stats from 49 days to 136 years
2025-10-23 23:30:10 +11:00
Scott Powell
c4f37a7afd
Merge commit '9633752788f31c1ec17a5e1cb781d146dface737' into dev
2025-10-23 21:49:11 +11:00
Scott Powell
e8667da13f
* T114: enabled GPS page in UITask
2025-10-23 21:44:52 +11:00
liamcottle
ddb19486c5
increase room server max uptime from 49 days to 136 years
2025-10-23 23:29:08 +13:00
liamcottle
6cc98d6ecc
increase repeater max uptime from 49 days to 136 years
2025-10-23 23:24:40 +13:00
Liam Cottle
9633752788
Merge pull request #1002 from wel97459/dev-CayenneLPP
...
Updated CayenneLPP to 1.6.1
2025-10-23 20:24:49 +13:00
Winston Lowe
c41532e3c2
Updated CayenneLPP to 1.6.1
2025-10-22 23:55:51 -07:00
kallanreed
5b380f6be5
Use correct macro for logging test
2025-10-22 16:44:20 -07:00
kallanreed
fe1cbe2b51
set PIN_GPS_EN in wismesh tag companion
2025-10-22 16:16:43 -07:00
Wesley Ellis
10ee49d9c7
Switch BMP085 mode to 0 for ULTRALOWPOWER
2025-10-22 16:53:11 -04:00
Wesley Ellis
0f123a92e8
Add support for bmp085/bmp180 temperature/pressure sensor
2025-10-22 16:17:06 -04:00
Matthias Wientapper
647cf55d13
* Add display of IP address to companion screen
2025-10-22 20:01:15 +02:00
recrof
389b09cbec
allow spreading factor from 5 and bandwidth from 7.8kHz
2025-10-22 15:15:29 +02:00
liquidraver
016b8e96b9
Fix reversed GPS PINs on G2 and enable timesync
2025-10-21 12:23:45 +02:00
ripplebiz
b32a7d0ad8
Merge pull request #981 from oltaco/revert-heltecT114-powersaving
...
Revert Heltec T114 power savings
2025-10-21 17:20:02 +11:00
ViezeVingertjes
6e00b75e83
Add Seeed Wio WM1110 Dev Board variant
2025-10-20 21:40:59 +02:00
taco
e57cd68616
Revert Heltec T114 power savings
...
As discussed on discord with @recrof people are having issues, possibly due to these changes. See https://github.com/meshcore-dev/MeshCore/issues/746
This reverts commit e38aa23df7 .
2025-10-21 00:34:57 +11:00
ripplebiz
d379ace500
Merge pull request #973 from recrof/rak_platform_update
...
equalize RAK with all other nrf52 variants and use newer platform with all important fixes
2025-10-20 20:07:49 +11:00
ripplebiz
d7ddc1ee2b
Merge pull request #972 from recrof/Adafruit_nRF52_Arduino-1.7.0
...
all nrf52 devices: force framework-arduinoadafruitnrf52 version to 1.10700.0
2025-10-20 20:04:36 +11:00
Tomas P
729ff152cd
Support for Elecrow Thinknode M2
2025-10-19 20:44:27 +02:00
ripplebiz
2b4749556d
Merge pull request #968 from fdlamotte/uitask_back3_disables_buzzer
...
uitask: bring back buzzer toggle on tracker l1
2025-10-19 14:34:42 +11:00
ripplebiz
0a70b7d413
Merge pull request #967 from fdlamotte/remove_target_h_dep
...
CommonCli: Remove dependency on target.h
2025-10-19 14:25:20 +11:00
ripplebiz
1dd8b64947
Merge pull request #923 from recrof/tlora_1.6_cleanup
...
TLora V2.1 1.6 cleanup
2025-10-19 14:15:55 +11:00
ripplebiz
3db467da34
Merge pull request #922 from recrof/station_g2_cleanup
...
station g2 cleanup
2025-10-19 14:11:20 +11:00
ripplebiz
f2a5c6edae
Merge pull request #921 from recrof/heltec_v2_cleanup
...
heltec v2 cleanup
2025-10-19 14:07:16 +11:00
ripplebiz
2c360955c1
Merge pull request #920 from recrof/heltec_v3_cleanup
...
heltec v3 cleanup
2025-10-19 14:01:50 +11:00
Liam Cottle
5cac18fd00
Merge pull request #962 from haxwithaxe/dev
...
Added more polished build.sh usage
2025-10-19 12:10:58 +13:00
Liam Cottle
1d2ce9e9e2
Merge pull request #809 from tekstrand/fixup
...
Change source of truth to this repo, remove whitespace
2025-10-19 12:07:53 +13:00
recrof
9ba14a9d4d
equalize RAK with all other nrf52 variants and use newer platform with all important fixes
2025-10-19 00:02:38 +02:00
recrof
e0952bbafd
all nrf52 devices: force framework-arduinoadafruitnrf52 version to 1.10700.0
2025-10-18 23:42:28 +02:00
Florent
8d54a107ec
SensorManager: remove setSettingByKey
2025-10-18 23:37:58 +02:00
Florent
d2f5673906
lgfx_display: better handle display class construction
2025-10-18 14:03:27 +02:00
Florent
4c9340f017
uitask: bring back buzzer toggle on tracker l1
2025-10-18 13:40:01 +02:00
Florent
165c168055
tracker_l1_eink: set UI_HAS_JOYSTICK
2025-10-18 13:11:18 +02:00
Florent
a578ffcfb7
CommonCli: Remove dependency on target.h
2025-10-18 12:33:43 +02:00
ripplebiz
893f056db8
Merge pull request #955 from liquidraver/dev
...
Add simple BME680 support to RAK (RAK1906)
2025-10-18 15:06:05 +11:00
haxwithaxe
095951abdf
Added more polished build.sh usage
2025-10-17 14:20:55 -04:00
fdlamotte
c91d764189
Merge pull request #956 from recrof/uf2_pio_task
...
added custom pio task "Create UF2 file"
2025-10-17 17:24:32 +02:00
recrof
32e1ca7174
added custom pio task "Create UF2 file"
2025-10-17 16:25:58 +02:00
fdlamotte
009b7ffce3
Merge pull request #953 from Woodie-07/dev
...
LR1110 packet shift issue workaround
2025-10-17 15:26:09 +02:00
Woodie-07
70f4ac795e
change println to debug macro in lr1110 patch
2025-10-16 16:25:18 +01:00
liquidraver
eb1f9b9cac
BME680 library doesn't have altitude calculation, we can add it here to match other sensors'
2025-10-16 11:29:22 +02:00
liquidraver
f54b014e29
Add simple BME680 support to RAK with adafruit library
2025-10-16 10:17:23 +02:00
Scott Powell
3926242975
* UITask: new UI_HAS_JOYSTICK
...
* MomentaryButton: new constructor 'multiclick' param
* WIoTrackerL1: now just use joystick, joystick press for KEY_ENTER, no multi-click for snappier UI
2025-10-16 17:33:22 +11:00
Scott Powell
d13bc3ad18
* fix for non-RAK targets
2025-10-15 22:51:05 +11:00
Scott Powell
49a0d87f4c
* fix for RAK12500 GPS (I2C)
2025-10-15 22:47:55 +11:00
ripplebiz
b640de90c2
Merge pull request #916 from Quency-D/dev-heltec_tracker_v2
...
add heltec tracker v2
2025-10-14 12:45:15 +11:00
ripplebiz
b94d05b54c
Merge pull request #911 from bplein/ikoka-nano-support
...
Ikoka Nano Variant
2025-10-14 12:39:35 +11:00
ripplebiz
173f553f92
Merge pull request #912 from recrof/patch-1
...
heltec wireless tracker: use `-D ARDUINO_USB_CDC_ON_BOOT=1` with all envs
2025-10-14 12:35:11 +11:00
Scott Powell
22a04b34c3
* repeater and room server: enable downgrading permissions on guest login
2025-10-14 12:31:43 +11:00
fdlamotte
4c25711902
Merge pull request #918 from recrof/xiao_c3_refresh
...
xiao c3 cleanup
2025-10-12 19:10:47 +02:00
recrof
9bde05ddd3
fix: remove VL53L0X because it causes bootloops on esp32c3
2025-10-12 17:16:45 +02:00
Woodie-07
effa54c9de
workaround for LR1110 shift issue
...
it seems that if the LR1110 radio hears a packet corrupted in a specific way, it'll report a packet of 0 length and with the header error IRQ set. every packet received afterwards will then be shifted to the right by 4 bytes on top of the radio's reported offset. this can occur multiple times with the shift increasing by 4 bytes each time. thus, this patch will read from an additional offset after hearing the trigger packet.
transmitting seems to reset the shift - unsure exactly what operation resets it but standby() is called after tx so patch assumes shift is 0 after standby(). more investigation may be needed here.
2025-10-12 16:09:57 +01:00
Scott Powell
6e8eaedd8f
* Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData()
2025-10-12 12:49:26 +11:00
Scott Powell
5b5aabcafd
* Advert type fix
...
* GPS pref defaults tidy
2025-10-12 12:33:20 +11:00
ripplebiz
c249484ad1
Merge pull request #890 from fdlamotte/CommonCLI--gps-management
...
CommonCLI: gps management commands
2025-10-12 12:21:47 +11:00
recrof
37a5625a02
move LilyGoTLoraBoard.h to variants, use template in platformio.ini, cleanup
2025-10-12 00:32:26 +02:00
recrof
23378bfa79
move StationG2Board.h to variants, enable ESM, add companion wifi, cleanup
2025-10-12 00:13:34 +02:00
recrof
d2dd983d62
heltec v2 cleanup
2025-10-11 23:35:10 +02:00
recrof
3c469386d5
moved HeltecV3Board.h to variant folder
2025-10-11 21:52:48 +02:00
Florent
972b614f32
gps_cli: gps advert to control advert location policy
2025-10-11 19:00:02 +02:00
recrof
18f8f513c2
xiao c3: migrated to esm, added missing roles, cleanup
2025-10-11 18:32:02 +02:00
Florent
21ec6d6f41
gps_cli: set node location based on gps
2025-10-11 18:00:57 +02:00
Florent
c76d9a1c87
gpsCli: use parseTextParts
2025-10-11 15:29:17 +02:00
Quency-D
a6518076d9
delete PSRAM.
2025-10-11 18:03:15 +08:00
Quency-D
66a150a0fc
add heltec tracker v2 board.
2025-10-11 18:01:26 +08:00
Rastislav Vysoky
653252b8cd
heltec wireless tracker: use -D ARDUINO_USB_CDC_ON_BOOT=1 with all envs
...
repeater and room server envs did not have arduino cdc flag enabled which resulted in broken serial.
2025-10-10 16:01:48 +02:00
ripplebiz
91fae87baa
Merge pull request #898 from syssi/wsl3-wifi-build
...
Introduce Heltec_WSL3_companion_radio_wifi target
2025-10-10 13:30:55 +11:00
ripplebiz
cfd0328850
Merge pull request #908 from ViezeVingertjes/feat/meshpocket-poweroff
...
Add hibernation support for MeshPocket
2025-10-10 11:38:07 +11:00
Bill Plein
8f39ad7a08
Ikoka Nano Variant
...
Created as a fork of the ikoka stick variant.
- Updated for Ikoka Nano legacy pinout
- Removed display support
- Removed user button support
- Retains I2C sensor support
Tested with the ebytes E22 30W module, companion-ble and repeater firmware versions, with an I2C INA3221 power sensor.
2025-10-09 17:31:32 -05:00
ViezeVingertjes
35fc727aec
Add powerOff support for MeshPocket
2025-10-09 20:30:25 +02:00
ripplebiz
e43edbf82a
Merge pull request #885 from ViezeVingertjes/fix/heltec-v4-max-tx-power
...
Add MAX_LORA_TX_POWER build flag for Heltec V4 configuration
2025-10-09 12:39:21 +11:00
Sebastian Muszynski
c003eb1388
Introduce Heltec_WSL3_companion_radio_wifi target
2025-10-07 11:17:19 +02:00
ripplebiz
0946595350
Merge pull request #871 from spacepc-de/fix-debug-log-field
...
Fix debug log: use c->extra.room.push_failures instead of c->push_failures
2025-10-07 09:45:11 +11:00
Florent de Lamotte
fefe01bf24
gps_cli: gps also restored on sensors and rooms
2025-10-06 15:30:18 +02:00
Florent de Lamotte
a53e608526
gps_cli: gps state is now saved and restored upon reboot
2025-10-06 15:12:03 +02:00
Florent de Lamotte
38f957c18b
Merge branch 'dev' into CommonCLI--gps-management
2025-10-06 14:26:05 +02:00
fdlamotte
766fbed3f5
Merge pull request #831 from Meshcore-Portugal/jbrazio/2025_87fe0ad8
...
Add bridge management CLI
2025-10-06 14:23:35 +02:00
Florent de Lamotte
8878f2cd06
sensor list command
2025-10-06 14:08:16 +02:00
João Brázio
67794e95b2
Add BRIDGE_DEBUG flag
2025-10-06 12:57:32 +01:00
João Brázio
1de66be8a3
Refactor debug logging across bridge implementations
2025-10-06 12:57:04 +01:00
Florent de Lamotte
85e4b84e64
cli_gps: remove callbacks and add generic sensor set/get.
2025-10-06 10:25:10 +02:00
Florent
3a5d92205e
cli_gps: use sensormanger to toggle gps on/off to keep state coherent
2025-10-05 20:31:25 +02:00
Florent
062e355578
CommonCLI: gps management commands
2025-10-05 19:23:52 +02:00
Florent
94ea99b89f
sensecap_indicator: initial espnow support
2025-10-05 13:58:25 +02:00
João Brázio
707b00d10b
Add bridge type command to CLI for reporting bridge configuration
2025-10-05 11:48:05 +01:00
ripplebiz
ccc82f5639
Merge pull request #878 from WattleFoxxo/tdeck
...
Scaling fixes for TDeck
2025-10-05 15:18:51 +11:00
ViezeVingertjes
808e113111
Add MAX_LORA_TX_POWER build flag for Heltec V4 configuration
2025-10-04 23:04:47 +02:00
tekstrand
070a26976f
trim trailing whitespace, clarify repeater gps, remove outdated instructions
2025-10-04 10:54:24 -05:00
WattleFoxxo
d3631cd9e5
Fix font and icon scaling issues for TDeck
2025-10-03 22:55:32 +10:00
ripplebiz
965456f6ab
Merge pull request #812 from khudson/source-cleanup
...
Ikoka Stick: Naming Convention, LED behavior, device strings
2025-10-03 14:04:00 +10:00
João Brázio
c011dc7a97
Remove WITH_ESPNOW_BRIDGE_SECRET definition from platformio.ini files and update documentation to use _prefs->bridge_secret
2025-10-03 00:23:09 +01:00
João Brázio
6c793a02f1
Bridge: enhance CLI configuration options
2025-10-03 00:20:09 +01:00
Florent
95c402f198
stm32: upd repeater targets
2025-10-02 12:18:47 +02:00
ripplebiz
9e0cd038c4
Merge pull request #821 from fdlamotte/ui_gps_page
...
ui_task: initial gps page
2025-10-02 18:54:23 +10:00
João Brázio
6ff308584e
WITH_BRIDGE was not implementing setBridgeState()
2025-10-02 09:47:00 +01:00
Scott Powell
4d42ed2cc1
Merge branch 'dev'
2025-10-02 12:52:48 +10:00
Scott Powell
3a8ad25437
* ver 1.9.1
2025-10-02 12:52:19 +10:00
Florent de Lamotte
0ab4045da4
DisplayDriver: introduce drawTextRightAlign and drawTextLeftAlign
2025-10-01 18:07:59 +02:00
Jonathan Stöcklmayer
4d82703021
Fix debug log: use c->extra.room.push_failures instead of non-existent c->push_failures
2025-10-01 09:50:41 +02:00
ripplebiz
2d17370c5c
Merge pull request #869 from LitBomb/patch-19
...
Update faq.md
2025-10-01 13:46:44 +10:00
uncle lit
7c1e2d6bf8
Update faq.md
...
added pyMC_core to meshcore projects
mentioned Cisien's meshcoretomqtt fork from Andrew-a-g
updated Coding Rate explanation and recommendation
updated radio presets and added how to update presets listed in the app
2025-09-30 16:01:11 -07:00
ripplebiz
b40dcc5c6d
Merge pull request #863 from liamcottle/fix/repeater-login
...
Fix: repeater login
2025-09-29 21:38:54 +10:00
liamcottle
07c4df24ef
add missing null terminator for login payload
2025-09-30 00:31:10 +13:00
ripplebiz
9c185d80d9
Merge pull request #859 from liamcottle/feature/board-cli-command
...
Add CLI Command: board
2025-09-29 13:28:21 +10:00
liamcottle
70011550ac
added 'board' cli command to get board name
2025-09-29 15:24:25 +13:00
Liam Cottle
e4d29f9d1f
Merge pull request #854 from liamcottle/fix/missing-build-flags
...
Fix: add missing build flags
2025-09-29 13:49:57 +13:00
Liam Cottle
a69fdb796e
Merge pull request #858 from csrutil/fix/tiny-relay-compile
...
Fix: add missing build flags for tiny_relay
2025-09-29 13:49:31 +13:00
csrutil
cbdeec0204
🔧 chore: update tiny_relay platformio.ini configuration
...
- Add ADVERT_LAT and ADVERT_LON definitions for both repeater and sensor variants
- Set MAX_NEIGHBOURS to 50 for improved network capacity
- Fix repeater build source filter path to include entire directory
2025-09-29 07:48:26 +08:00
Liam Cottle
13a539d404
Merge pull request #837 from silverphish-io/typo-fix
...
Typo fix
2025-09-29 10:42:23 +13:00
ripplebiz
7ed4dab26e
Update README.md
2025-09-28 21:43:30 +10:00
liamcottle
18e9761c43
add missing build flags for failed builds
2025-09-28 23:32:04 +13:00
Scott Powell
2f8adc198c
* ver 1.9.0
2025-09-28 19:24:00 +10:00
Scott Powell
d72738768f
Merge branch 'main' into dev
...
# Conflicts:
# variants/heltec_vision_master_e290/platformio.ini
2025-09-28 19:21:48 +10:00
ripplebiz
18c7911be1
Merge pull request #820 from fdlamotte/gps_reset_fix
...
ESM: delegate gps management to LocationProvider
2025-09-28 19:08:35 +10:00
ripplebiz
96cc7c731d
Merge pull request #852 from liamcottle/increase-max-neighbours
...
Increase MAX_NEIGHBOURS to 50
2025-09-28 18:32:10 +10:00
ripplebiz
1f7564a3b8
Merge pull request #850 from liamcottle/fix/legacy-neighbours-cli
...
Backwards Compatibility: Legacy Neighbours CLI
2025-09-28 18:30:11 +10:00
Liam Cottle
683e2c69dd
Merge pull request #853 from liamcottle/fix-calc-shared-secret
...
fix multiple candidates warning
2025-09-28 21:05:03 +13:00
liamcottle
4784132ac6
fix multiple candidates warning
2025-09-28 21:01:41 +13:00
Florent
d95b32d107
gps_page: enable if gps enabled
2025-09-28 09:43:28 +02:00
fdlamotte
0510adb4fc
Merge pull request #843 from dotdavid/main
...
Create Xiao_S3_WIO_companion_radio_usb profile
2025-09-28 09:24:23 +02:00
fdlamotte
e262620cce
ESM: add gps reset after begin
2025-09-28 09:20:59 +02:00
fdlamotte
f86259fe68
location provider: reduce reset delay
2025-09-28 09:16:45 +02:00
liamcottle
c5932a6878
increase MAX_NEIGHBOURS from 8 to 50
2025-09-28 16:11:58 +13:00
Liam Cottle
7fdcafd33d
Merge pull request #851 from liamcottle/build-script-suffix
...
build script should check for firmware type suffix
2025-09-28 15:04:22 +13:00
liamcottle
5784824689
build script should check for firmware type suffix
2025-09-28 15:00:45 +13:00
liamcottle
808d7f3d06
admin cli neighbors command should sort newest to oldest
2025-09-28 14:38:13 +13:00
Liam Cottle
c2bf5b1913
Merge pull request #844 from liamcottle/refactor-variant-suffixes
...
refactor variants to use standard firmware type suffixes
2025-09-28 14:20:04 +13:00
liamcottle
ae0e456aa7
refactor variants to use standard firmware type suffixes
2025-09-27 23:45:33 +12:00
Liam Cottle
0399aa7a5e
Merge pull request #770 from Meshcore-Portugal/jbrazio/2025_44aa3add
...
Normalize repeater target names
2025-09-27 23:15:23 +12:00
ripplebiz
01b096cbca
Merge pull request #842 from liamcottle/feature/custom-build-flags
...
Build Script Improvements
2025-09-27 20:32:20 +10:00
David Hall
5695cb08e0
Create Xiao_S3_WIO_companion_radio_usb profile
...
Create Xiao_S3_WIO_companion_radio_usb profile from Xiao_S3_WIO_companion_radio_ble profile
2025-09-27 11:14:28 +01:00
Scott Powell
96f7bb3d60
* repeater & room server fix for blank guest password
2025-09-27 01:56:27 +10:00
liamcottle
0ed5c50968
allow building multiple specific targets at same time
2025-09-26 22:59:20 +12:00
liamcottle
72484e85db
don't overwrite existing platformio build flags in build script
2025-09-26 22:46:38 +12:00
ripplebiz
3a90c3daa4
Merge pull request #828 from recrof/meshadventurer-build-fix
...
fixed meshadventurer failing build
2025-09-26 20:05:34 +10:00
fdlamotte
8fa7c60987
Merge pull request #835 from oltaco/wio-L1-revert-pins
...
fix: revert ENV_PIN_SDA for Wio Tracker L1 non-eink
2025-09-26 07:19:40 +02:00
silverphish-io
a96a06c765
Typo fix in faq and payloads
2025-09-25 15:01:39 +01:00
silverphish-io
f20e483951
Update faq.md
2025-09-25 14:59:25 +01:00
taco
92ebe1e811
Revert addition of ENV_PIN_SDA
2025-09-25 20:08:18 +10:00
ripplebiz
bef97689f3
Merge pull request #833 from liamcottle/feature/binary-neighbours-request
...
Implement binary request/response for Repeater Neighbours
2025-09-25 14:04:12 +10:00
liamcottle
5cbeaf8805
add FIRMWARE_VER_LEVEL to companion PUSH_CODE_LOGIN_SUCCESS
2025-09-25 15:21:58 +12:00
liamcottle
c9304298b0
use pointer array
2025-09-25 14:55:36 +12:00
liamcottle
77aec13cb5
use uint16_t to allow fetching up to 65535 neighbours
2025-09-25 14:55:36 +12:00
liamcottle
5a657f7fc4
implement new binary request/response for paginated neighbours
2025-09-25 14:55:36 +12:00
Scott Powell
d3ccef3845
* companion: disabled processing/sending of keep_alive packets (deprecated)
...
* FIRMWARE_VER_LEVEL now moved to end of response payloads
2025-09-25 09:39:11 +10:00
Scott Powell
2ba6b9feb7
Merge commit '53c012d4902953f19b2be0a1bf16a68e8a324887' into dev
2025-09-25 09:14:10 +10:00
Scott Powell
fe35a9231f
* repeater: reduce FS writes on login
2025-09-25 09:11:48 +10:00
Scott Powell
7f14915350
* Login response payload: now includes FIRMWARE_VER_LEVEL
2025-09-25 09:07:59 +10:00
fdlamotte
53c012d490
Merge pull request #830 from SoulOfNoob/feat/add_t-echo-lite_variant
...
Feat: add `T-Echo-Lite` Variant to MeshCore
2025-09-24 20:59:58 +02:00
João Brázio
599c132326
Minor fixes
2025-09-24 16:46:03 +01:00
João Brázio
0a7cbf5e41
Add bridge management CLI
2025-09-24 16:30:00 +01:00
Jan Ryklikas
e3284f3e2e
fix: revert to orignal default scaling and fix it in variant config
2025-09-24 15:10:51 +02:00
Jan Ryklikas
db55541b9e
refactor: remove redundant import statement
2025-09-24 14:45:40 +02:00
recrof
e8a9ee76e6
fixed meshadventurer failing build
2025-09-24 09:04:16 +02:00
Jan Ryklikas
570e959def
refactor: readability
2025-09-23 22:28:54 +02:00
Jan Ryklikas
69fc63f356
refactor: use macro from ttgo repo for readability
2025-09-23 22:18:04 +02:00
Jan Ryklikas
adba2273bf
chore: cleanup
2025-09-23 22:10:27 +02:00
Jan Ryklikas
e5b736f441
chore: refactor to use GxEPD2 fork
2025-09-23 21:57:35 +02:00
Jan Ryklikas
bba9479464
add T-Echo-Lite Device Variant
2025-09-23 19:39:11 +02:00
Jan Ryklikas
87f42d9cce
import missing eInk display
2025-09-23 19:38:45 +02:00
Florent
250114d34b
ui_task: initial gps page
2025-09-23 12:08:34 +02:00
Florent
d477262f2f
ESM: delegate gps management to LocationProvider
2025-09-23 11:12:07 +02:00
ripplebiz
dfdde4f842
Merge pull request #814 from WattleFoxxo/tdeck
...
LilyGo TDeck support
2025-09-23 16:00:10 +10:00
ripplebiz
50f51540f9
Merge pull request #811 from fdlamotte/tracker_l1_environment_sensors
...
Tracker l1: environment sensors
2025-09-23 15:34:22 +10:00
ripplebiz
f17d5c73d3
Merge pull request #818 from silverphish-io/faq-spellcheck
...
Updated some typos and spelling mistakes in FAQ
2025-09-23 15:15:24 +10:00
silverphish-io
c94ac570d2
Updated some typos and spelling mistakes in FAQ
2025-09-22 21:49:56 +01:00
Florent
aa821948f2
tracker_l1: fix bme226 init in ESM to include all sensors
2025-09-22 19:10:01 +02:00
WattleFoxxo
b21855c11a
LillyGo TDeck support
2025-09-22 23:48:46 +10:00
ripplebiz
9b6c1b8e88
Merge pull request #813 from Quency-D/dev-heltec_v4
...
add heltec v4 board.
2025-09-22 22:32:01 +10:00
Quency-D
a126906276
add heltec_v4 board.
2025-09-22 19:58:27 +08:00
Quency-D
3c82f180ef
Merge pull request #10 from meshcore-dev/dev
...
merge dev
2025-09-22 19:49:49 +08:00
Florent
277f76c536
tracker-l1: correct bad definition for PIN_GPS_EN
2025-09-22 12:06:05 +02:00
Florent
17046c2ab7
Merge branch 'dev' into tracker_l1_environment_sensors
2025-09-22 07:30:42 +02:00
ripplebiz
46a0daff8e
Merge pull request #808 from fdlamotte/wio-l1-eink
...
wio-l1-eink initial support
2025-09-22 15:07:22 +10:00
Scott Powell
53e1cb0e89
* tidy and minor fix for offline queue deletion
2025-09-22 15:01:28 +10:00
ripplebiz
9615e308c5
Merge pull request #796 from 446564/mutable-queue
...
make offline queue channel messages mutable
2025-09-22 14:54:09 +10:00
kelsey hudson
32b95b2c77
Merge branch 'source-cleanup' of github.com:khudson/MeshCore into source-cleanup
2025-09-21 14:14:28 -07:00
kelsey hudson
747ecbba28
Ikoka Stick: Move to unified code naming conventions
2025-09-21 14:12:15 -07:00
Florent
af15efe24c
tracker_l1: support for EnvironmentSensorManager
2025-09-21 22:14:22 +02:00
kelsey hudson
7ff54746a8
Merge remote-tracking branch 'upstream/dev' into dev
2025-09-21 08:28:16 -07:00
Florent
ec7cc21ba4
wio-l1-eink initial support
2025-09-20 21:45:13 +02:00
ripplebiz
215b66a894
Merge pull request #805 from csrutil/tiny-relay-variant
...
Tiny relay variant
2025-09-21 00:03:58 +10:00
ripplebiz
1e6af998d6
Merge pull request #806 from oltaco/safer-lfs-traverse
...
Safer _countLfsBlock / _getLfsUsedBlockCount
2025-09-21 00:00:19 +10:00
taco
fb2daf1475
add bounds check to _countLfsBlock / _getLfsUsedBlockCount
2025-09-20 17:36:52 +10:00
Florent
0894b9a5cd
stm32: force the use of Adafruit BusIO v1.17.2 as 1.17.3 won't compile on this platform
2025-09-20 08:54:30 +02:00
csrutil
9861434bf6
🔗 fix: update tiny_relay board URL to proper STM32WLE5CC documentation link
2025-09-20 14:07:22 +08:00
csrutil
d2cf520042
✨ feat: add tiny_relay board configuration
...
Add board configuration for BB-STM32WL tiny relay variant with STM32WLE5CC MCU support including debug and upload protocols.
2025-09-20 10:59:36 +08:00
csrutil
39a423e66e
Add tiny_relay variant files
...
- platformio.ini: Build configuration for tiny relay variant
- target.cpp/h: Hardware-specific implementation
- variant.h: Variant identification header
2025-09-20 10:58:02 +08:00
ripplebiz
35cb78ec2f
Merge pull request #801 from recrof/sensecap_solar_env_manager
...
use sensor_base for seeed sensecap solar
2025-09-19 13:47:26 +10:00
recrof
38edb4f932
use sensor_base for seeed sensecap solar
2025-09-18 09:15:01 +02:00
Scott Powell
9bbca99ebb
* GenericVibration: code style refactor
2025-09-18 13:19:54 +10:00
ripplebiz
4589b3fbc0
Merge pull request #708 from csrutil/feature/vibration-feedback
...
✨ feat: add vibration feedback system
2025-09-18 13:12:36 +10:00
ripplebiz
5313e337ba
Merge pull request #730 from michaelhart/node-displayname-improvements
...
Adds name filtering and text truncation for display in HomeScreen
2025-09-18 12:42:10 +10:00
ripplebiz
93a99e3c0a
Merge pull request #745 from ViezeVingertjes/fix-pin-display
...
Fix: Set device as connected after successful authentication
2025-09-18 12:02:08 +10:00
ripplebiz
1a885f155e
Merge pull request #783 from sschueller/eora-s3
...
feat: Added EByte EoRa-S3-XXXTB Support #740
2025-09-18 11:13:40 +10:00
Scott Powell
1d7830dda2
Merge branch 'rep-room-acl' into dev
2025-09-17 17:25:26 +10:00
csrutil
d49b30fb4c
remove the unnecessary blank line
2025-09-17 09:19:18 +08:00
csrutil
86e608af41
♻️ refactor: unify UI notification methods into single notify() function
...
Consolidates soundBuzzer() and triggerVibration() into a unified notify() method
that handles both audio and haptic feedback based on UIEventType.
2025-09-17 08:56:18 +08:00
csrutil
dcccf3e641
✨ feat: add vibration feedback support for UI events
...
- Add genericVibration class with 5-second cooldown and 1-second pulse
- Integrate vibration triggers for new messages and contact discoveries
- Add conditional compilation support with PIN_VIBRATION guard
- Implement abstract interface for vibration in UITask system
2025-09-17 08:56:18 +08:00
Michael Hart
a9da34f1d3
feat: add DisplayDriver methods for UTF-8 filtering and text ellipsis
...
- Add translateUTF8ToBlocks() method to convert UTF-8 characters to displayable blocks
- Add drawTextEllipsized() method for text truncation with ellipsis
- Apply UTF-8 filtering to node names, recent contacts, and message content
- Use ellipsized text rendering for recent contacts to prevent overflow
- Addresses PR feedback by moving text processing to DisplayDriver level
2025-09-16 17:17:15 -07:00
446564
5f0602bb1f
make offline queue channel messages mutable
...
older channel messages can be overwritten, keeping other mssagage types
this allows a user to be away for a long time and still get the most recent
channel messages without losing any direct messages for exampe
2025-09-16 15:40:21 -07:00
Liam Cottle
959196ff2e
Merge pull request #795 from tahnok/python3-build-sh
...
Use python3 not python in build.sh
2025-09-17 10:26:09 +12:00
Wesley Ellis
7d9e5072ae
Use python3 not python in build.sh
...
Since the bin/uf2conv/uf2conf.py script uses python3, use python3 as the command instead of python.
On my ubuntu 24.04 machine, I don't have a python command in my path by default
2025-09-16 18:15:14 -04:00
ripplebiz
804341a19e
Merge pull request #787 from recrof/rak-wishmesh-tag-fix
...
fix building errors for wismesh tag companion ble
2025-09-16 13:09:30 +10:00
Scott Powell
dfeb5d8fc2
Merge branch 'dev' into rep-room-acl
2025-09-16 13:07:14 +10:00
Scott Powell
b3202767b5
Merge branch 'dev' into reciprocal-path-retry
2025-09-16 13:03:41 +10:00
fdlamotte
1e377aa0fe
Merge pull request #786 from recrof/xiao-nrf52-cleanup
...
tidy up xiao nrf52 variant
2025-09-15 15:45:38 +02:00
recrof
3f68797d76
fix compilation errors for wismesh tag
2025-09-15 14:56:04 +02:00
recrof
50f924f66c
xiao nrf52: add all available sensors, remove *_alt envs, cleanup
2025-09-15 14:46:10 +02:00
ripplebiz
cdf5d60224
Merge pull request #785 from liamcottle/feature/new-message-timestamps
...
Update lastmod when a new message is received
2025-09-15 19:34:26 +10:00
Scott Powell
2e5dcac1f5
Merge branch 'dev' into reciprocal-path-retry
2025-09-15 18:34:39 +10:00
ripplebiz
2a228565d5
Merge pull request #784 from liamcottle/fix/ble-advertising-interval
...
revert unexpected change to ble advertising interval on nrf52
2025-09-15 11:42:48 +10:00
liamcottle
844849c402
revert unexpected change to ble advertising interval on nrf52
2025-09-15 13:06:35 +12:00
liamcottle
69b326b3a9
update lastmod when a new message is received
2025-09-15 12:28:26 +12:00
Kelsey Hudson
39f0510fa9
Merge remote-tracking branch 'upstream/dev' into dev
2025-09-14 14:51:05 -07:00
Stefan Schüller
ba5d81025a
fix: removed display reset (NC), set SDA and SCL for display
2025-09-14 13:53:45 +02:00
Stefan Schüller
33e73eb1a1
feat: Added EByte EoRa Pi
2025-09-14 13:53:38 +02:00
Scott Powell
daf616015b
* bug fix
2025-09-14 21:51:32 +10:00
Scott Powell
68e31d23d1
* room server: ClientACL added
2025-09-14 21:22:12 +10:00
ripplebiz
66ee904489
Merge pull request #782 from askpatrickw/patch-1
...
Update FAQ with new server administration screenshot
2025-09-14 14:13:14 +10:00
ripplebiz
5054578a38
Merge pull request #776 from liamcottle/fix/nrf52-ble-pin-display
...
Fix: BLE pin disappearing too quickly on nrf52 devices
2025-09-14 13:23:10 +10:00
Patrick
36689c8d28
fix markdown
2025-09-13 14:05:57 -07:00
Patrick
3783be72c9
Update FAQ with new server administration screenshot
2025-09-13 14:04:31 -07:00
Scott Powell
3a83b3fb63
* repeater now using ClientACL class
2025-09-13 19:37:15 +10:00
Scott Powell
6e7b5e02c3
Merge branch 'dev' into reciprocal-path-retry
2025-09-13 18:48:24 +10:00
Scott Powell
cb94882dc7
Merge branch 'dev' into rep-room-acl
2025-09-13 18:43:02 +10:00
Liam Cottle
aa01141e70
Merge pull request #777 from bryantkelley/docs/add-ble-firmware-troubleshooting-q-a
...
[Docs] Add companion not showing up over Bluetooth to FAQ
2025-09-13 14:23:51 +12:00
Bryant Kelley
de331d7db9
Add companion not showing up over BLE to FAQ
2025-09-12 11:31:05 -07:00
liamcottle
b7c8db1989
don't mark as connected until connection secured
2025-09-12 20:23:21 +12:00
Scott Powell
a0d6f8348b
* refactor: moved ACL out of SensorMesh -> ClientACL
2025-09-12 15:35:31 +10:00
ripplebiz
7e0d33c7b2
Merge pull request #768 from 446564/fix/nano-g2-notification
...
fix nano g2 notification
2025-09-12 12:07:36 +10:00
João Brázio
5ec27c879c
Normalize repeater target names
2025-09-10 23:56:07 +01:00
446564
bf6014b4fa
fix nano g2 notification
...
revert change to disable buzzer before hibernate
needs more work as the buzzer pin is a macro and can't be changed at runtime
2025-09-10 09:44:58 -07:00
ripplebiz
760d2f1dd7
Merge pull request #762 from oltaco/new-ldscript-for-extrafs
...
New linker scripts for NRF52 companion envs
2025-09-10 18:25:07 +10:00
ripplebiz
348fe69827
Merge pull request #763 from csrutil/fix-environment-sensor-node-altitude
...
Fix node_altitude not being set in EnvironmentSensorManager
2025-09-10 17:45:06 +10:00
Scott Powell
e80fea95bb
Merge branch 'rep-room-acl' into dev
2025-09-10 17:35:05 +10:00
Scott Powell
dc2cd1cff4
* RAK wishmesh tag: build fix
2025-09-10 17:34:06 +10:00
ripplebiz
5097e44e4b
Merge pull request #739 from fdlamotte/ui_sensors_page
...
ui: sensors page
2025-09-10 17:23:34 +10:00
Scott Powell
8ab2c0cb3f
* repeater and room server build_src_filter fixes
2025-09-10 17:04:58 +10:00
Liam Cottle
d24b26b3d9
Merge pull request #767 from liamcottle/fix/wismeshtag-poweroff-wakeup
...
Fix: WisMeshTag power off and wake up
2025-09-10 17:44:37 +12:00
liamcottle
ad4ffeaa51
fix wismesh tag power off and wake up
2025-09-10 17:04:03 +12:00
Florent de Lamotte
417f6ac2bb
ui: use LPPDataHelper and conditionals for sensors page
2025-09-09 16:32:41 +02:00
taco
c8472ffd72
add rak4631 board json
2025-09-10 00:05:14 +10:00
Florent de Lamotte
589b786539
Merge remote-tracking branch 'upstream/dev' into ui_sensors_page
2025-09-09 15:36:14 +02:00
csrutil
1aa18dda66
✨ feat: add altitude support to environment sensor node telemetry
...
- Include actual node altitude in GPS telemetry instead of hardcoded 0.0f
- Extract altitude data from both ublox_GNSS and serial GPS sources
- Update debug logging to display altitude alongside lat/lon coordinates
2025-09-09 19:20:39 +08:00
Scott Powell
aa1b0594b8
* room refactor: extracted MyMesh class
2025-09-09 20:52:19 +10:00
Scott Powell
56093191ca
Merge branch 'dev' into rep-room-acl
...
# Conflicts:
# examples/simple_repeater/main.cpp
2025-09-09 19:02:23 +10:00
Scott Powell
25bd6988e7
* Repeater: slight refactor of 'bridge' instantiation
2025-09-09 18:46:30 +10:00
Scott Powell
832b943bb2
Merge branch 'dev' into rep-room-acl
...
# Conflicts:
# examples/simple_repeater/main.cpp
2025-09-09 18:02:05 +10:00
Scott Powell
6bc9e34db8
Merge branch 'dev' into reciprocal-path-retry
2025-09-09 17:51:55 +10:00
taco
65b0ccf8bd
fix incorrect ram and flash sizes in board jsons
2025-09-09 17:38:10 +10:00
taco
cc881e3dcd
fix inconsistencies across nrf companion roles
2025-09-09 17:00:29 +10:00
taco
9e26b0eb3d
new ldscript for extrafs nrf companion envs
2025-09-09 16:55:46 +10:00
fdlamotte
2c36254445
Merge pull request #454 from jbrazio/jbrazio/2025_3f11ad35
...
RS232/ESP-NOW Bridge/cross repeater implementation
2025-09-09 07:34:31 +02:00
ripplebiz
a8a95d601a
Merge pull request #760 from fschrempf/readme-repeat-clarification
...
README.md: Explain that companion nodes do not repeat messages
2025-09-09 14:25:37 +10:00
ripplebiz
78360d3f49
Update README.md
2025-09-09 14:05:07 +10:00
Frieder Schrempf
3cdd76e0d7
README.md: Explain that companion nodes do not repeat messages
...
This is a key difference compared to other systems and I see people
asking this a lot. It is mentioned in the FAQ but let's make it more
prominent in the README.
2025-09-08 23:04:32 +02:00
João Brázio
c3f944418a
Add BRIDGE_DELAY as a buffer to prevent immediate processing conflicts in the mesh network
2025-09-08 20:21:33 +01:00
João Brázio
23592e3c4c
Add ESPNow bridge configurations for all ESP32 targets
2025-09-08 18:49:33 +01:00
João Brázio
690981b14e
Refactor bridge packet handling to use common magic number and size constants
2025-09-08 18:16:50 +01:00
ripplebiz
03207ea89e
Merge pull request #756 from oltaco/correct-max-contacts-channels
...
Set correct new MAX_CONTACTS and MAX_GROUP_CHANNELS for some NRF devices
2025-09-08 23:37:43 +10:00
ripplebiz
c12681d7d1
Merge pull request #755 from recrof/wismesh_rak_customlfs
...
rak wismesh: set the `MAX_CONTACTS` and `MAX_GROUP_CHANNELS` in line with earlier CustomLFS changes
2025-09-08 23:37:24 +10:00
taco
d94ad90bb3
correct max contacts and channels for some nrf devices
2025-09-08 22:06:15 +10:00
Scott Powell
2af1e3fc1e
* refactor: MyMesh class extracted
2025-09-08 21:46:19 +10:00
recrof
f9cfc92141
set the max_contacts and max_group channels in line with other nrf52 targets
2025-09-08 13:26:19 +02:00
Scott Powell
a5b7fe3fdb
* proposed change for re-trying reciprocal path transmit
2025-09-08 19:22:59 +10:00
ripplebiz
fb31a5c6e5
Merge pull request #751 from fdlamotte/t1000e_revert_gps_resetb
...
T1000e revert gps resetb
2025-09-08 15:35:10 +10:00
kelsey hudson
27eb9c9dce
Ikoka Stick: Move to unified code naming conventions
2025-09-07 21:29:10 -07:00
João Brázio
af31eed48f
Merge remote-tracking branch 'upstream/dev' into jbrazio/2025_3f11ad35
2025-09-08 02:04:14 +01:00
João Brázio
91e659a17d
Refactor bridge implementations to inherit from BridgeBase
2025-09-08 02:03:08 +01:00
João Brázio
e078961714
Refactor ESPNowBridge packet handling to use 2-byte magic header and improve packet size validation
2025-09-08 01:20:54 +01:00
João Brázio
e362c807bc
Rename RS232 bridge environments
2025-09-07 21:46:51 +01:00
João Brázio
527f4bcc1a
Support ESPNow and improve documentation
2025-09-07 21:39:54 +01:00
Florent
26aad5120b
t1000e: revert GPS_RESETB as an INPUT
2025-09-07 19:48:02 +02:00
fdlamotte
3cec0e7658
Merge pull request #736 from ViezeVingertjes/t1000e-low-power
...
Introduce BLE low-power mode and enable DC/DC converter
2025-09-07 16:01:22 +02:00
ViezeVingertjes
09152dc0d4
Replaced BLE_LOW_POWER with BLE_TX_POWER & updated usages.
2025-09-07 15:44:24 +02:00
ViezeVingertjes
3efba2cfe1
Few adjustments after testing.
2025-09-07 14:08:53 +02:00
fdlamotte
e37d77e68a
Merge pull request #744 from ViezeVingertjes/fix-t1000e-sleep
...
T1000-E: ensure rails off and radio idle before system off; fix button wake pin
2025-09-07 12:33:40 +02:00
ripplebiz
d5f6183ee4
Merge pull request #741 from recrof/rak_wismesh_tag
...
new variant: RAK WisMesh Tag
2025-09-07 20:28:53 +10:00
ripplebiz
72d8ca6452
Merge pull request #749 from oltaco/thinknode-m1-companion-usb
...
Add companion usb to ThinkNode M1
2025-09-07 20:17:38 +10:00
ripplebiz
421e2ce209
Merge pull request #748 from oltaco/t-echo-qspi-pins
...
Add QSPI pins for Lilygo T-Echo
2025-09-07 20:14:44 +10:00
ripplebiz
ef660e100c
Merge pull request #747 from oltaco/customlfs-versionbump
...
CustomLFS version bump
2025-09-07 20:13:31 +10:00
taco
580943bd3e
add QSPI pins to Lilygo T-Echo
2025-09-07 20:00:44 +10:00
taco
4c5f0925ca
add companion usb to ThinkNode M1
2025-09-07 19:59:01 +10:00
taco
3262a8f742
new version of CustomLFS lib
2025-09-07 19:54:42 +10:00
kelsey hudson
a8fe8bb55a
Merge remote-tracking branch 'upstream/dev' into dev
2025-09-06 15:13:58 -07:00
ViezeVingertjes
d1bd1c4b1c
fix: only hide pin after successful authentication in SerialBLEInterface
2025-09-06 22:06:47 +02:00
ViezeVingertjes
44dd96dc0c
T1000-E: refactor GPS initialization; set GPS_RESETB pin as OUTPUT and remove redundant pin settings
2025-09-06 20:42:11 +02:00
ViezeVingertjes
6ac03584cc
T1000-E: ensure rails off and radio idle before system off; fix button wake pin
2025-09-06 20:10:09 +02:00
ripplebiz
77715b3d25
Merge pull request #732 from jbrazio/jbrazio/2025_b5813561
...
Heltec T114 without display
2025-09-06 22:46:46 +10:00
ripplebiz
7d623412c2
Merge pull request #727 from recrof/waveshare_rp2040_lora_refactor
...
tidy up waveshare rp2040 lora variant
2025-09-06 22:39:42 +10:00
ripplebiz
5af708c5b9
Merge pull request #726 from recrof/xiao_rp2040_refactor
...
tidy up xiao rp2040 variant
2025-09-06 22:38:07 +10:00
ripplebiz
76aa3e7e3b
Merge pull request #653 from oltaco/CustomLFS
...
Extra filesystem support for NRF52 (CustomLFS)
2025-09-06 17:45:20 +10:00
taco
b2e57bb421
improved RescueCLI for dual FS
2025-09-06 14:15:40 +10:00
taco
2e7ce98cb5
refactor: use _getContactsChannelsFS() instead of ifdefs
2025-09-06 14:15:40 +10:00
taco
7a6ed7fe98
nrf52 targets: increase limits for contacts and channels
2025-09-06 14:15:40 +10:00
taco
5e2a9766dc
support dual filsystems on nrf52
...
store identity and prefs in UserData and contacts, channels and adv_blobs in ExtraData
2025-09-06 14:15:40 +10:00
taco
5e69fb1c5a
switch to using QSPI bus for external flash
2025-09-06 14:15:40 +10:00
taco
5b68f85506
initial commit: CustomLFS
2025-09-06 14:15:40 +10:00
João Brázio
e2302f9942
Delete the variant-specific NullDisplayDriver.h and update target.h to use the shared implementation from #735
2025-09-05 17:59:59 +01:00
João Brázio
357ecfca5b
Merge remote-tracking branch 'upstream/dev' into jbrazio/2025_b5813561
2025-09-05 17:54:45 +01:00
recrof
56676a352f
new variant: RAK WisMesh Tag
2025-09-05 16:21:19 +02:00
fdlamotte
401b1125c1
Merge pull request #734 from recrof/lilygo_techo_refactor
...
lilygo t-echo enhancements and cleanup
2025-09-05 16:11:04 +02:00
fdlamotte
2315500f46
Merge pull request #735 from recrof/t1000_refactor
...
t1000 cleanup + move NullDisplayDriver.h out of t1000e folder
2025-09-05 15:58:59 +02:00
João Brázio
760b5b07a6
Remove retransmit check for RS232 bridge in logTx
...
Since the flag is preserved and respected by the mesh processing on the receiving end, there's no risk of these packets being retransmitted endlessly.
2025-09-05 14:49:06 +01:00
Florent de Lamotte
099fe61d3a
ui: refresh sensors on gps toggle
2025-09-05 15:35:04 +02:00
Florent de Lamotte
cac8eb7600
ui: ENTER on SENSORS page toggles gps
2025-09-05 15:32:02 +02:00
Florent de Lamotte
51cbc8ee75
ui: sensors page
2025-09-05 15:20:52 +02:00
João Brázio
ffde4ee439
Rename SerialBridge to RS232Bridge
2025-09-05 11:28:40 +01:00
ripplebiz
b022174f83
Merge pull request #738 from recrof/lilygo_tlora_c6_new_radio_init
...
tlora_c6 to use new radio init
2025-09-05 19:55:29 +10:00
ripplebiz
93c0245579
Merge pull request #737 from recrof/generic_e22_radio_init
...
variant generic-e22 to use new radio init
2025-09-05 19:53:29 +10:00
recrof
0e2fdbfd82
tlora_c6 to use new radio init
2025-09-05 11:33:48 +02:00
recrof
3e88487a2c
generic e22 uses new radio init
2025-09-05 11:17:57 +02:00
recrof
97e007a7fe
fix typo in pin configuration
2025-09-05 11:12:17 +02:00
ripplebiz
13c5c70413
Merge pull request #725 from recrof/rpi_picow_refactor
...
tidy up rpi picow variant
2025-09-05 19:04:21 +10:00
ViezeVingertjes
7de301374c
Updated BLE functionality for low power mode in SerialBLEInterface. Updated platformio.ini to enable low power mode and added DC/DC converter support in T1000eBoard for improved power efficiency.
2025-09-05 10:46:51 +02:00
João Brázio
59957e2da5
Add nRF52 support and refactor packet handling
...
This commit introduces several improvements to the SerialBridge helper:
- Adds support for the nRF52 platform by implementing the `setPins` configuration.
- Corrects the type cast for the RP2040 platform from `HardwareSerial` to `SerialUART`.
- Refactors packet deserialization to use a new `Packet::readFrom()` method instead of a direct `memcpy`, improving encapsulation.
- Updates the packet length validation to use the more appropriate `MAX_TRANS_UNIT` constant.
2025-09-05 09:22:06 +01:00
ripplebiz
4ce49a2356
Merge pull request #731 from oltaco/tracker-l1-platformio-tidy
...
Wio Tracker L1: correct platformio.ini defines
2025-09-05 13:44:58 +10:00
ripplebiz
10c363b29f
Merge pull request #706 from recrof/patch-5
...
fixed max_contacts to 300 for heltec v3 companion_ble
2025-09-05 13:22:52 +10:00
João Brázio
e25282b9ee
Add serial logging for TX/RX packets
2025-09-05 02:07:26 +01:00
João Brázio
c8b75dfc3b
Rework packet serialization and parsing
2025-09-05 01:50:50 +01:00
João Brázio
b329ff6131
Prevent packet loops and duplicates
...
Implement a "seen packets" table to track packets that have already been processed by the serial bridge.
This prevents packets from being re-transmitted over the serial link if they have already been seen, and it stops inbound packets from serial from being re-injected into the mesh if they are duplicates.
Duplicate inbound packets are now freed to prevent memory leaks.
2025-09-04 23:50:13 +01:00
João Brázio
4aefe43209
Extract serial bridge into dedicated classes
...
This commit refactors the serial bridge functionality out of the `simple_repeater` example and into a more reusable, object-oriented structure.
An `AbstractBridge` interface has been introduced, along with a concrete `SerialBridge` implementation. This encapsulates all the logic for packet framing, checksum calculation, and serial communication, cleaning up the main example file significantly.
The `simple_repeater` example now instantiates and uses the `SerialBridge` class, resulting in better separation of concerns and improved code organization.
2025-09-04 23:43:05 +01:00
recrof
5e607215d6
moved pindefs from board to platformio.ini
2025-09-04 23:31:05 +02:00
recrof
ab58f15bd5
t1000 cleanup + move NullDisplayDriver.h to helpers/ui for other variants to use
2025-09-04 23:12:57 +02:00
recrof
3ed2259bbf
lilygo t-echo cleanup, add AUTO_SHUTDOWN_MILLIVOLTS
2025-09-04 21:45:42 +02:00
João Brázio
76b468f568
Refactor display driver inclusion for Heltec T114 to support configurations without a display
2025-09-04 13:26:48 +01:00
taco
1c3fcf4c91
fix: wio tracker L1: tidy platformio.ini
2025-09-04 19:59:33 +10:00
ripplebiz
6b39e9668e
Merge pull request #724 from recrof/thinknode_m1_refactor
...
tidy up thinknode_m1 variant
2025-09-04 19:33:49 +10:00
ripplebiz
b8b772fb5c
Merge pull request #713 from Quency-D/dev-meshpocket
...
add heltec meshpocket board.
2025-09-04 19:31:40 +10:00
Liam Cottle
04444a32b3
Merge pull request #729 from liamcottle/fix/thinknodem1
...
ThinkNode M1: add missing crc lib dep
2025-09-04 20:42:15 +12:00
liamcottle
510d27d8fc
add missing crc32 libdep after gxepd display driver changes
2025-09-04 20:07:37 +12:00
Quency-D
3af8fa01cb
-D DISABLE_DIAGNOSTIC_OUTPUT this one will make GxEPD less verbose ;)
2025-09-04 15:39:08 +08:00
Quency-D
32d4653212
Delete the sensor part and adapt to the latest crc display.
2025-09-04 14:04:00 +08:00
Quency-D
d42760b462
Merge pull request #9 from meshcore-dev/dev
...
Dev
2025-09-04 13:50:09 +08:00
ripplebiz
516b5878ec
Merge pull request #723 from recrof/heltec_t114_refactor
...
tidy up heltec_t114 variant
2025-09-04 13:52:23 +10:00
Quency-D
cb234aef6f
Merge branch 'dev' into dev-meshpocket
2025-09-04 11:47:55 +08:00
ripplebiz
3d7d349952
Merge pull request #720 from oltaco/newui-multiclick-toggles
...
new-ui: add double/triple clicks, buzzer and gps toggle functions
2025-09-04 13:41:54 +10:00
ripplebiz
c036f1595c
Merge pull request #719 from recrof/vision_master_refactor
...
renamend and refactored vision master, added usb roles
2025-09-04 13:33:48 +10:00
ripplebiz
ffdd3ad70b
Merge pull request #722 from fdlamotte/techo_epd_damage
...
Techo epd damage
2025-09-04 13:25:09 +10:00
recrof
95c020f954
waveshare rp2040 lora cleanup
2025-09-03 21:37:07 +02:00
recrof
2d8257f9ea
xiao rp2040 cleanup
2025-09-03 21:28:46 +02:00
recrof
00f58e621d
rpi picow cleanup
2025-09-03 20:52:58 +02:00
recrof
9ea522618d
thinknode m1 refactor
2025-09-03 20:17:55 +02:00
recrof
e844024e30
tidy up heltec_t114 variant
2025-09-03 19:38:38 +02:00
Florent
476da110df
gxepd: use a crc to track damage !
2025-09-03 18:17:37 +02:00
Florent
2da88587f8
cleanups (remove statics and typos)
2025-09-03 17:41:05 +02:00
taco
d7420dceb1
alter keycode keycode handling
2025-09-03 16:28:58 +10:00
taco
aa19635e37
add new keycodes
2025-09-03 15:48:50 +10:00
taco
a46c9f1228
increase gps/buzzer alert times
...
600 is a bit short for eink
2025-09-03 14:02:35 +10:00
taco
6b5df95e26
long press cancels multi click
2025-09-03 12:29:20 +10:00
taco
4d3c7b364e
sliding multiclick window
2025-09-03 12:03:31 +10:00
taco
e2ea363d05
wake screen on double and triple clicks
2025-09-03 08:31:38 +10:00
taco
011d50c05d
multi click support including buzzer toggle
2025-09-03 08:25:59 +10:00
recrof
f4eb3df830
renamend and refactored vision master to play better with build system
2025-09-02 22:23:32 +02:00
ripplebiz
b0178b06ff
Merge pull request #717 from oltaco/promicro-hibernate
...
fix: promicro: add powerOff
2025-09-02 21:38:37 +10:00
taco
a420b85a5c
fix: promicro: add powerOff
2025-09-02 21:30:51 +10:00
Scott Powell
9cf493241d
* HeltecV3: powerOff() fix
2025-09-02 21:18:05 +10:00
Florent de Lamotte
2b8644f75e
techo: display backlight behavior
2025-09-02 11:43:48 +02:00
Quency-D
295f23ab21
add heltec meshpocket board.
2025-09-02 13:56:24 +08:00
Quency-D
a767ffc970
Merge pull request #7 from Quency-D/dev
...
merge Dev
2025-09-02 13:43:15 +08:00
ripplebiz
c456ccfd59
Merge pull request #700 from fdlamotte/techo_env_sensors
...
techo: use EnvironmentSensor to get BME280 data
2025-09-02 14:58:57 +10:00
ripplebiz
b2fa4974b6
Merge pull request #711 from oltaco/heltec-vision-master-rename-companion-target
...
fix: Heltec Vision Master E290: rename companion target
2025-09-02 14:57:38 +10:00
Quency-D
1acd7095e2
Merge pull request #6 from Quency-D/dev
...
merge Dev
2025-09-02 11:25:36 +08:00
taco
2a5008ddc4
fix: Heltec Vision Master E290: rename companion target
2025-09-02 08:06:43 +10:00
ripplebiz
b9972bce6f
Update README.md
2025-09-01 22:14:21 +10:00
ripplebiz
81e731a06e
Update README.md
2025-09-01 22:07:36 +10:00
ripplebiz
af1ae281af
Update README.md
2025-09-01 22:00:06 +10:00
Rastislav Vysoky
ee143d0d9e
fixed max_contacts to 300 for v3
2025-09-01 12:21:03 +02:00
João Brázio
37c8d6d359
Add bridge support for WSL3 board
2025-09-01 10:53:51 +01:00
João Brázio
13b67f0e04
Merge remote-tracking branch 'upstream/dev' into jbrazio/2025_3f11ad35
2025-09-01 10:47:19 +01:00
Scott Powell
85269666f6
Merge branch 'dev'
2025-09-01 19:32:54 +10:00
Scott Powell
2aafb1ab4f
* ver bump
2025-09-01 19:32:15 +10:00
Liam Cottle
083fee2c57
Merge pull request #704 from liamcottle/fix/wismesh-pocket-user-button
...
Fix: WisMesh Pocket user button
2025-09-01 21:09:54 +12:00
liamcottle
cd669beb94
fixed wismesh pocket user button
2025-09-01 21:04:41 +12:00
Scott Powell
22317ca81a
* MomentaryButton: added support for analog button (with threshold)
...
* RAK: support for PIN_USER_BTN_ANA
2025-09-01 17:11:55 +10:00
Scott Powell
bfd764308f
* reverting HeltecV3 _CURRENT_LIMIT change
2025-09-01 16:28:53 +10:00
Scott Powell
7cf29c598d
* Meshadventurer companion USB build fix
2025-09-01 16:10:45 +10:00
Scott Powell
c1233511b3
* added CommonCLI::saveIdentity()
2025-09-01 15:22:11 +10:00
Scott Powell
de50eae12e
* ESP platform ver > 6.11.0 seems to break Github Actions
2025-09-01 14:29:40 +10:00
ripplebiz
91f921fa81
Merge pull request #698 from recrof/esp32_companion_max_contacts
...
raised companion max contacts for esp32 "classic" targets; changed WSL3 to 300.
2025-09-01 14:26:42 +10:00
Florent
f2e1633b68
techo: let location_manager set clock
2025-08-31 21:45:47 +02:00
kelsey hudson
5b84df823e
Merge remote-tracking branch 'upstream/dev' into dev
2025-08-31 11:30:59 -07:00
Florent
f63567b34b
techo: use EnvironmentSensor to get BME280 data
2025-08-31 18:09:05 +02:00
fdlamotte
02d0da5d13
Update library.json version
2025-08-31 17:30:31 +02:00
recrof
8d05f16d8d
raised max contacts for esp32 classic companions to 160 and 170; set to 300 for WSL3
2025-08-31 16:23:21 +02:00
Scott Powell
b49890bc8e
Merge branch 'dev'
2025-08-31 23:43:33 +10:00
Scott Powell
f163e14ffd
* ver bump
2025-08-31 23:42:15 +10:00
Scott Powell
1a158f8c2c
* agc.reset.interval rounding warning
2025-08-31 23:15:56 +10:00
ripplebiz
20360fe03f
Merge pull request #696 from recrof/esp32c6_pioarduino_downgrade
...
downgrading pioarduino because build issues
2025-08-31 22:55:40 +10:00
ripplebiz
255938fae9
Merge pull request #695 from recrof/esp32_c3_c6_s3_max_contacts_300
...
set companion radios with esp32c3 esp32c6 and esp32s3 to 300 contacts max
2025-08-31 22:45:35 +10:00
Liam Cottle
e112844b7f
Merge branch 'dev' into esp32_c3_c6_s3_max_contacts_300
2025-09-01 00:38:21 +12:00
recrof
e244c67284
downgrading pioarduino because build issues
2025-08-31 14:33:49 +02:00
recrof
2efa6f4203
set companion radios with esp32c3 esp32c6 and esp32s3 boards to max 300 contacts
2025-08-31 14:27:44 +02:00
ripplebiz
216deaf689
Merge pull request #694 from recrof/dev_xiao_s3_wio_serial_fix
...
fix: add xiao s3 wio serial companion to new ui
2025-08-31 21:00:01 +10:00
ripplebiz
658ae6bfd6
Merge pull request #693 from recrof/dev_meshadventurer_fix
...
fix: migrate meshadventurer to new ui
2025-08-31 20:59:13 +10:00
ripplebiz
5aed6364af
Merge pull request #692 from liamcottle/feature/thinknode-m1-poweroff
...
ThinkNode M1: low battery auto shutdown
2025-08-31 20:56:58 +10:00
recrof
fa90d97143
fix: add xiao s3 wio serial companion to new ui
2025-08-31 12:11:07 +02:00
recrof
187951948d
fix: migrate meshadventurer to new ui
2025-08-31 12:09:04 +02:00
Liam Cottle
c88b4c78a5
Merge pull request #690 from mattzzw/main
...
Update faq.md, add information on how to configure wifi
2025-08-31 18:02:50 +12:00
kelsey hudson
9002300f68
Merge remote-tracking branch 'upstream/dev' into dev
2025-08-30 17:54:42 -07:00
Matthias Wientapper
14c12b3a4a
Update faq.md
2025-08-30 20:53:57 +02:00
liamcottle
345f861a66
add low battery shutdown alert for thinknode m1
2025-08-30 23:09:01 +12:00
liamcottle
83100e63b8
auto shutdown thinknode m1 at 3.3v
2025-08-30 21:56:00 +12:00
liamcottle
67904a0228
turn off tx led when powering off
2025-08-30 21:54:46 +12:00
ripplebiz
ad2c3ecb9f
Merge pull request #617 from Quency-D/dev-heltec_t190_board
...
Add heltec_vision_master_t190 board.
2025-08-29 20:11:24 +10:00
ripplebiz
7fe3c86318
Merge pull request #687 from Quency-D/new-ui-heltec-paper
...
New UI for heltec paper
2025-08-29 19:59:40 +10:00
Quency-D
c7bf2c9ec8
Remove duplicate rows.
2025-08-29 17:31:28 +08:00
ripplebiz
182cb8bdea
Merge pull request #686 from Quency-D/new-ui-e213
...
New UI heltec e213.
2025-08-29 19:18:06 +10:00
ripplebiz
aa69dc00b0
Merge pull request #685 from liamcottle/fix/wifi-companion-clients
...
WiFi Companion: always accept new connections
2025-08-29 19:16:52 +10:00
Quency-D
60e1b4bd02
Merge pull request #5 from Quency-D/dev
...
Merge Dev
2025-08-29 17:16:30 +08:00
Quency-D
003749f9fb
Remove duplicate rows.
2025-08-29 17:12:35 +08:00
Quency-D
f0111e37f1
Merge pull request #4 from Quency-D/dev
...
Merge Dev
2025-08-29 16:49:08 +08:00
ripplebiz
6db6c180c3
Merge pull request #683 from taedryn/t114-power-consumption
...
Improving T114 power consumption
2025-08-29 17:50:30 +10:00
liamcottle
0203032a07
disconnect existing wifi client when new connection established
2025-08-29 19:50:05 +12:00
ripplebiz
b5906e5f6a
Merge pull request #684 from liamcottle/new-ui/heltec-v3-wifi
...
Add new UI to Heltec v3 WiFi Companion
2025-08-29 17:48:02 +10:00
ripplebiz
7c6c6555eb
Merge pull request #679 from Quency-D/new-ui-e290
...
New UI heltec e290.
2025-08-29 17:06:15 +10:00
ripplebiz
71c86fee56
Merge pull request #680 from 446564/nano-g2-hibernate
...
add power off to nano g2
2025-08-29 17:04:17 +10:00
Scott Powell
decebcbb3d
* minor compilation fix
2025-08-29 17:01:39 +10:00
liamcottle
f70d761b53
add new ui to heltec v3 wifi companion
2025-08-29 18:58:54 +12:00
ripplebiz
a1bf51acd4
Merge pull request #663 from liamcottle/feature/remove-neighbour
...
Add CLI command to remove neighbour
2025-08-29 16:50:08 +10:00
liamcottle
2339ee2583
add default no op implementation for remove neighbor function
2025-08-29 18:17:01 +12:00
liamcottle
6daad070e5
use new instance of neighbour info object when removing neighbour
2025-08-29 18:08:06 +12:00
Laura J
b0dd2c32e8
Merge branch 'dev' into t114-power-consumption
2025-08-28 19:42:08 -07:00
fdlamotte
df98a2932d
Merge pull request #673 from 446564/t1000e-roles
...
add remaining roles to t1000e
2025-08-28 18:14:06 +02:00
446564
464fb91013
add power off to nano g2
2025-08-28 08:37:25 -07:00
446564
bf73402cbc
remove display class from repeater and room
2025-08-28 08:13:33 -07:00
Quency-D
8b91a42dbe
Remove duplicate rows.
2025-08-28 19:20:11 +08:00
Quency-D
f15b553954
Merge pull request #3 from Quency-D/dev
...
Merge Dev
2025-08-28 18:56:56 +08:00
Quency-D
ca12982bfb
Adapt the new UI for heltec t190.
2025-08-28 17:07:33 +08:00
Quency-D
b1b069552f
Merge pull request #2 from Quency-D/dev
...
Merging changes
2025-08-28 15:36:59 +08:00
Quency-D
e51e49246c
Adapt the new UI for heltec e290.
2025-08-28 15:00:27 +08:00
Quency-D
045ed8d6a0
Remove duplicate rows.
2025-08-28 14:36:56 +08:00
Quency-D
93fe0c27ee
Adapt the new UI for heltec e213.
2025-08-28 14:29:56 +08:00
Quency-D
c84ddd4b98
Adapt the new UI for heltec paper.
2025-08-28 14:03:20 +08:00
ripplebiz
06b780a919
Merge pull request #671 from aveao/why2025-badge-pr
...
Add WHY2025 badge as a variant
2025-08-28 09:45:16 +10:00
ripplebiz
30a3b73451
Merge pull request #675 from fdlamotte/sensormesh_additions
...
SensorMesh: handleIncomingMsg from admin
2025-08-28 09:25:13 +10:00
Florent
28bedf9575
SensorMesh: add the possibility to receive msgs from admin
2025-08-27 21:19:12 +02:00
446564
a69cbe4115
add remaining roles to t1000e
...
usb companion, repeater and room server
2025-08-27 10:30:56 -07:00
kelsey hudson
23e4ff3bb0
Merge remote-tracking branch 'upstream/dev' into dev
2025-08-27 00:39:35 -07:00
kelsey hudson
a25c9be681
Ikoka Stick: Board IDs, LED behavior
...
Updates the manufacturer identifier with the EBYTE module. Makes the LED
behave properly. Turns the bright blue LED off after the first time you
transmit anything via LoRa.
2025-08-27 00:37:16 -07:00
ave
948e17b463
add why2025 badge as a target
2025-08-27 08:34:38 +02:00
Florent
c6e1b99516
lib_build: add UI_FLAVOR and some cleanup
2025-08-26 13:28:42 +02:00
Laura J
e38aa23df7
modified T114 code to disable many unused peripherals, and set up the LOWPWR power mode. all changes should be quite safe, but testing for a couple days just in case.
2025-08-25 22:10:18 -07:00
ripplebiz
1b32d376bd
Merge pull request #665 from jbrazio/jbrazio/2025_9776d79d
...
Fix Heltec v3 433MHz crash while transmitting
2025-08-26 12:55:18 +10:00
ripplebiz
515adaa23c
Merge pull request #662 from fdlamotte/lib_build_display_support
...
lib_build: Support display and example build
2025-08-26 10:28:20 +10:00
ripplebiz
c7e6b7ce1c
Merge pull request #667 from LitBomb/patch-18
...
Update faq.md
2025-08-26 10:25:04 +10:00
uncle lit
c7fa9fedbb
Update faq.md
...
update instruction to add a node to the Internet Map from the app, and note that you can use the same companion radio to remove the nodes you added previously
add channel and contact QR code URL format
2025-08-25 17:20:13 -07:00
João Brázio
e4d1dec2f6
Increase power limit for Heltec v3 433 MHz
2025-08-25 17:44:14 +01:00
Florent
993262784f
lib_build: exclude file from example
2025-08-25 18:34:50 +02:00
Florent
2e7bfe389a
lib_build: include example code in build
2025-08-25 17:50:48 +02:00
Florent
b50eeef42f
lib_build: fix ST7789 so we don't have to add helpers/ui in INC_DIRS
2025-08-25 16:33:34 +02:00
liamcottle
d08644e769
add ability to remove neighbour via cli
2025-08-25 23:45:50 +12:00
Florent
21acfc2d83
lib_build: support display
2025-08-25 12:11:39 +02:00
ripplebiz
0e0c8a0f02
Merge pull request #660 from khudson/station_g2_logger
...
Station G2: Adds repeater variant with packet logging on
2025-08-25 12:05:22 +10:00
ripplebiz
485336a32a
Merge pull request #656 from khudson/dev
...
Ikoka Stick: Adding variant support for different Ebyte S22 modules
2025-08-25 12:04:08 +10:00
ripplebiz
63f9a7251f
Merge pull request #659 from fdlamotte/use_as_lib
...
Use as lib
2025-08-25 11:58:00 +10:00
kelsey hudson
d5ea8e47cb
Station G2: Adds repeater variant with packet logging on
...
Adds a variant to Station G2 which turns on mesh packet logging to
serial. Useful for telemetry logging. Sites such as map.w0z.is depend
on this functionality.
2025-08-24 15:54:05 -07:00
Florent
b14384a506
lib_build: add nrf52 and RP2040
2025-08-24 14:47:03 +02:00
Florent
23852c6e66
simplify src_filter creation
2025-08-24 13:09:55 +02:00
Florent
a3e7c7eeaf
let users compile their projects against meshcore as a lib
2025-08-24 13:06:19 +02:00
kelsey hudson
ba09d714b6
Ikoka Stick: Adding variant support for Ebyte S22 modules
...
The Ebyte S22 module comes in three variants, 22dBm, 30dBm, and 33dBm. Each
requires a different TX power max setting to avoid frying the PA frontend.
Breaks out variants and roles by module type.
2025-08-22 23:29:28 -07:00
Scott Powell
4399269098
* Companion: new-ui, power off now labelled "hibernate"
2025-08-23 14:45:18 +10:00
João Brázio
61212757bd
Merge remote-tracking branch 'origin/dev' into jbrazio/2025_3f11ad35
2025-08-22 23:00:35 +01:00
ripplebiz
0902cf5a73
Merge pull request #651 from awolden/awolden/ina226
...
Add INA226 to environmental sensors
2025-08-22 17:58:04 +10:00
Alex Wolden
e8c46e126a
Fixed shunt value for ina226
2025-08-21 13:23:05 -07:00
ripplebiz
1f92573487
Merge pull request #650 from LitBomb/patch-17
...
Update faq.md
2025-08-21 16:58:02 +10:00
Alex Wolden
3c93b81c6c
Add INA226 to rak
2025-08-20 22:23:54 -07:00
uncle lit
d7f4abe774
Update faq.md
...
update verbiage on room server's repeat functionality to discourage turning repeat on on room server.
Update repeater flood advert to 3 hours and mentioning pending PR to change that to 12 hours.
2025-08-20 22:08:19 -07:00
ripplebiz
c4a7c0d279
Merge pull request #649 from LitBomb/patch-16
...
Update faq.md
2025-08-21 11:28:23 +10:00
uncle lit
cf1d1b7292
Update faq.md
...
updated .mp3 file list for sound customization on t-deck
added instruction to take a screenshot on t-deck
Added link to MeshCore Ultra firmware user guide
update github link from /meshcore to /meshcore-dev
Update current hardware list to point to flasher.meshcore.co.uk
2025-08-20 12:20:06 -07:00
ripplebiz
0343787c6d
Merge pull request #645 from recrof/dev
...
set default flood advert interval to 12 hours
2025-08-20 22:01:07 +10:00
recrof
b0dd97630a
set default flood advert interval to 12 hours
2025-08-20 13:44:41 +02:00
Scott Powell
f393b1f504
* various repeaters: fix for missing MomentaryButton module
2025-08-19 23:14:11 +10:00
ripplebiz
8ebac59754
Merge pull request #642 from fdlamotte/techo_power_off
...
techo_ui: implement poweroff + led fixes
2025-08-19 21:23:49 +10:00
Florent
82987bb6ea
techo_ui: implement poweroff + led fixes
2025-08-19 09:03:34 +02:00
ripplebiz
f0d925d90f
Merge pull request #638 from recrof/dev
...
fix RAK build errors
2025-08-18 22:12:31 +10:00
recrof
06cc889d4a
fix RAK build errors
2025-08-18 12:53:44 +02:00
ripplebiz
4647f82ef5
Merge pull request #636 from fdlamotte/t1000_wait_button_release_before_poweroff
...
t1000: wait for button release before powering off
2025-08-18 13:52:12 +10:00
Florent
02c0cd7558
t1000: wait for button release before powering off
2025-08-17 16:28:02 +02:00
ripplebiz
d2065c89fd
Merge pull request #633 from oltaco/dev
...
WioTrackerL1: add joystick left and right for new UI
2025-08-17 22:17:59 +10:00
ripplebiz
826c4f6643
Merge pull request #634 from recrof/dev
...
station g2: switch to New UI
2025-08-17 22:15:01 +10:00
recrof
f9259b2698
station g2: switch to new_ui
2025-08-17 11:57:38 +02:00
taco
e30cdc0d69
WioTrackerL1: add joystick left and right for new UI
2025-08-17 19:01:28 +10:00
ripplebiz
019adcca5a
Merge pull request #632 from oltaco/dev
...
WioTrackerL1: add poweroff support
2025-08-17 18:13:14 +10:00
taco
10fb4def08
WioTrackerL1: add poweroff support
2025-08-17 18:10:58 +10:00
Scott Powell
33ef1f4bfe
* Xiao_s3_wio: ui-new
2025-08-17 17:52:05 +10:00
ripplebiz
72ba833753
Merge pull request #629 from fdlamotte/techo_ui_tweaks
...
techo_ui: some tweaks
2025-08-17 17:48:47 +10:00
Scott Powell
df5529de79
* Xiao_nRF and Xiao_rp2040 build fixes
2025-08-17 17:36:35 +10:00
Scott Powell
cb272d7cb9
* Wio-e5-mini: ui-orig
...
* WioTrackerL1: ui-new
2025-08-17 17:23:28 +10:00
Florent
e25d9ea558
techo_ui: some tweaks
2025-08-17 08:52:57 +02:00
Scott Powell
97ecc1cb00
* RAK_4631: ui-new
2025-08-17 16:49:08 +10:00
Scott Powell
9734e5b88a
* Minewsemi: ui-orig
2025-08-17 16:35:39 +10:00
Scott Powell
0ee1b1e0f3
* lilygo_tlora_v2_1: ui-new
2025-08-17 16:31:50 +10:00
Scott Powell
a0e7c13647
* TBeam variants: ui-new
2025-08-17 16:18:39 +10:00
Scott Powell
b27d316480
* T3S3 variants, ui-new
2025-08-17 16:06:26 +10:00
Scott Powell
0fc0f1c4c1
* WSL3 fixes. Heltec V2 ui-new
2025-08-17 15:50:25 +10:00
ripplebiz
49a000f6cb
Merge pull request #631 from khudson/new-companion-ui
...
Ikoka Stick: Use New Companion UI. Fix repeater & room server roles.
2025-08-17 08:24:09 +10:00
kelsey hudson
e3a9e9d5b6
Ikoka Stick: Use new UI, make repeater & room server work
...
* Enable the new UI on the BLE and USB Companion roles.
* Fix compilation issues with the repeater and room server roles.
* Remove ESP32-related alternate pinout cruft from the NRF build tree.
* build.sh: add build-matching-firmwares command to allow e.g. building
all roles for a given variant by passing the variant name.
2025-08-16 15:09:42 -07:00
kelsey hudson
4920611506
Merge commit '6f09ff2e972f3f0413910ef7b5d298caa145f5ae' into new-companion-ui
...
Merging ikoka stick repeater/room server commit to simplify pull request later.
2025-08-16 12:26:34 -07:00
ripplebiz
c0be135fe8
Merge pull request #616 from haylinmoore/nix-add-python3
...
default.nix: add python3 to the shell
2025-08-17 00:32:41 +10:00
Scott Powell
0b1e1de710
* Heltec tracker, now using /ui-new
...
* variants with no DISPLAY_CLASS .ini fixes
2025-08-16 21:53:36 +10:00
Scott Powell
a4db089cd8
* original UITask now in /ui-orig folder
2025-08-16 21:09:35 +10:00
Scott Powell
264b786da8
* Refactor of UITask, moved to /ui-new
2025-08-16 20:04:54 +10:00
ripplebiz
32d3f96a82
Merge pull request #624 from oltaco/new-companion-ui
...
Support NewUI on WioTrackerL1
2025-08-16 13:51:18 +10:00
kelsey hudson
6f09ff2e97
Ikoka Stick: repeater/room server functionality
...
Make Repeater and Room Server work as build targets.
Remove esp32-related alternate pinout cruft from the Ikoka Stick
NRF build tree.
2025-08-15 19:29:22 -07:00
taco
91b46cd451
Support NewUI on WioTrackerL1
2025-08-16 09:29:48 +10:00
Quency-D
bfd8cdac2f
Add heltec_vision_master_t190 board.
2025-08-15 15:54:24 +08:00
Scott Powell
32c9261533
Merge branch 'dev' into new-companion-ui
2025-08-15 15:39:11 +10:00
ripplebiz
ab205334db
Merge pull request #612 from Quency-D/dec-heltec_e290
...
Add heltec_vision_master_e290 board.
2025-08-15 13:59:42 +10:00
ripplebiz
9283e2141b
Merge pull request #615 from MikesAllotment/new-companion-ui
...
UI Refresh changes for HeltecV2 and Faketec ProMicro
2025-08-15 13:04:38 +10:00
Haylin Moore
6312c79061
default.nix: add python3 to the shell
...
There are many systems that chose to not have a global python install,
namely my own systems :p. I end up having to nix-shell -p python3 anytime
I want to run the build.sh as the last step uf2conv depends on python
2025-08-14 15:52:04 -07:00
MikesAllotment
56c1b8b5e6
Added support for new EnhancedUI MomentaryButton
...
for Heltec V2 and Faketec ProMicro variants
2025-08-14 14:17:26 +01:00
ripplebiz
b522fa33bb
Merge pull request #608 from Quency-D/dev-heltec_e213
...
Add heltec_vision_master_e213 board.
2025-08-14 21:20:21 +10:00
Quency-D
4723eb76ae
Use the base class to optimize screen display code.
2025-08-14 17:43:46 +08:00
ripplebiz
c202820150
Merge pull request #609 from 446564/nan-g2-usb
...
add nano g2 usb companion
2025-08-14 15:58:25 +10:00
ripplebiz
518baee260
Merge pull request #587 from alexbegoon/feature/xiao-c6-external-antenna-support
...
[Feature] Add external antenna support for XIAO ESP32C6
2025-08-14 15:41:09 +10:00
Quency-D
aa48e66121
Add heltec_vision_master_e290 board.
2025-08-14 10:30:27 +08:00
Quency-D
ef7031f5e0
Modify the flash size to 16MB.
2025-08-14 10:26:26 +08:00
446564
43c3a527f3
add nano g2 usb companion
2025-08-13 09:47:01 -07:00
Quency-D
f876522324
Add heltec_vision_master_e213 board.
2025-08-13 18:12:48 +08:00
Quency-D
88462a671c
* Heltec CT62: sensor role (with 2 channel relay support + 1 digital …
...
* Heltec CT62: sensor role (with 2 channel relay support + 1 digital …
2025-08-13 17:00:17 +08:00
Scott Powell
4c7f75d4ec
* Heltec CT62: sensor role (with 2 channel relay support + 1 digital input)
2025-08-12 20:56:59 +10:00
Scott Powell
e46487d402
* MomentaryButton: pullupdown param moved to constructor
2025-08-12 10:01:35 +10:00
ripplebiz
4df9c7c1c6
Merge pull request #601 from khudson/dev
...
Adding support for Ikoka Stick with Seeed Xiao nRF54 baseboard.
2025-08-11 11:46:11 +10:00
ripplebiz
17a62710e6
Merge pull request #595 from gumbero/main
...
Added room option to T-Beam SX1276
2025-08-11 11:30:29 +10:00
kelsey hudson
8e5d20a6e4
Adding support for Ikoka Stick with Seeed Xiao nRF54 baseboard.
...
Adds a new variant 'ikoka_stick_nrf' and associated support files. This is
based on the Xiao nRF54 code with pin numbers and functions changed to suit the
differences in hardware between the WIO SX1262 board and the Ikoka Stick.
Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend
in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot.
Adds support for an SSD1306 display connected to the display header. Note the
display pinout is the same as the RAK4631 display header so make sure to use a
display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND
reversed from what this board expects).
Adds support for display rotation to SSD1306Display via a platformIO define.
This support was added following the same paradigms found elsewhere in the code
for rotating a display.
2025-08-10 10:44:00 -07:00
gumbero
c4f3fe49a3
Update platformio.ini
2025-08-10 14:25:43 +02:00
ripplebiz
c15333db1e
Merge pull request #598 from 446564/nano-g2-new-ui
...
add new UI to nano g2
2025-08-10 14:44:04 +10:00
446564
075ab493a9
add new UI to nano g2
2025-08-09 20:47:35 -07:00
Scott Powell
8ca457fc42
Merge branch 'dev' into new-companion-ui
2025-08-10 12:28:25 +10:00
ripplebiz
327e847d23
Merge pull request #594 from wel97459/dev
...
Changed waveshare_rp2040_lora radio_init function to use radio.std_init
2025-08-10 12:22:07 +10:00
ripplebiz
5afea4cd7a
Merge pull request #597 from 446564/ignore-clangd
...
add lsp ignores
2025-08-10 12:13:32 +10:00
446564
4eaa350632
add lsp ignores
...
adds cache and ccls dirs and clangd files to git ignore
2025-08-09 17:37:51 -07:00
Tomas Gabor
828913b453
Added room option to T-Beam SX1276
2025-08-09 21:28:31 +02:00
ripplebiz
cbcdceb3bc
Merge pull request #589 from fdlamotte/techo_new_ui
...
TEcho: New companion UI
2025-08-09 18:53:51 +10:00
wel97459
ad1deab1f1
Changed radio_init to use radio.std_init this also changes the preamble to 16 as before it was 8
2025-08-08 20:17:06 -07:00
Alexander Begoon
33ddd7e3ba
Move variant specific code
2025-08-08 23:04:14 +02:00
fdlamotte
9dbe513a86
Merge branch 'new-companion-ui' into techo_new_ui
2025-08-08 15:40:19 +02:00
Florent
b52abfd168
techo: initial support of new companion ui
2025-08-08 15:34:58 +02:00
ripplebiz
cd26a54453
Merge pull request #588 from liamcottle/feature/new-companion-ui-thinknode-m1
...
add support for new companion ui on thinknode m1
2025-08-08 22:24:55 +10:00
liamcottle
634b39f3bb
add support for new companion ui on thinknode m1
2025-08-09 00:21:10 +12:00
Scott Powell
e9ba5be910
* UI revamp for companion radios
2025-08-08 20:01:31 +10:00
Alexander Begoon
5b0cc3cf62
Add support for Xiao ESP32C6 with external antenna configuration
2025-08-07 22:36:40 +02:00
ripplebiz
31705f4a7a
Merge pull request #584 from 446564/nano-g2-gps-fix
...
nano g2 gps fixes
2025-08-07 12:57:07 +10:00
Ded
4f2501398f
good oops
2025-08-06 18:52:57 -07:00
ripplebiz
fa9ed6b37c
Merge pull request #579 from alexbegoon/feature/add_meshimi_support
...
Add Meshimi support
2025-08-07 11:35:39 +10:00
2070a6d9a8
various fixes for nano g2 gps
...
- baud rate changed to default
- switch state detected at boot to enable position
- small edge cases fixed
- more mesh debugging output added
Co-authored-by: LitBomb <lithangw@hotmail.com >
Co-authored-by: Nick from BOSTON
2025-08-06 11:41:37 -07:00
ripplebiz
c989ec07f3
Merge pull request #575 from Quency-D/dev
...
Add HELTEC MeshSolar board.
2025-08-06 11:18:07 +10:00
Alexander Begoon
a79f1a568d
Add Meshimi configuration and environment setups in platformio.ini
2025-08-05 18:45:20 +02:00
Scott Powell
1b4f7661be
Revert "disable led light on t-echo device"
...
This reverts commit 55453e1136441900b4aaa019f2d06ce4ae3d1aa9.
2025-08-05 18:45:20 +02:00
TasmanDevil
edc9e3dd5c
disable led light on t-echo device
2025-08-05 18:45:20 +02:00
Rastislav Vysoky
b4f6032583
replaced Andy Kirby's discord with MeshCore discord.
2025-08-05 18:45:20 +02:00
Rastislav Vysoky
ad2d96455c
faq: fix broken links, replace discord link from Andy's discord to MeshCore discord
2025-08-05 18:45:20 +02:00
Rastislav Vysoky
f44a4d2fee
remove hardware compatibility list - it was outdated.
2025-08-05 18:45:19 +02:00
uncle lit
31043de45f
Update faq.md
...
- rewrite Linux firmware update with more detailed instructions
- fix T114 reset typo: double click twice, not once
- add link reference to MeshCore logo on github
- add public channel key for t-deck to the t-deck section
- reference the verbiage "what is meshcore?" on meshcore.co.uk homepage
2025-08-05 18:45:19 +02:00
Quency-D
e9ce7bdcd4
refactor variants #393
...
refactor variants #393
2025-08-05 15:26:24 +08:00
Quency-D
74a52575a0
refactor variants #393
2025-08-05 15:24:51 +08:00
Quency-D
88e4a292a8
Add HELTEC MeshSolar board.
2025-08-04 14:29:49 +08:00
ripplebiz
908b69f0f2
Merge pull request #573 from recrof/sensor_template
...
platformio sensor template, use it for v3 and RAK.
2025-08-04 11:03:53 +10:00
ripplebiz
9b2dd7e98a
Merge pull request #569 from recrof/dev
...
esp32c6: pin the pioarduino version to last working one
2025-08-03 12:53:45 +10:00
recrof
f383b6234f
create sensor template in platformio.ini, update heltec v3 and rak4631 to use new template
2025-08-02 21:40:56 +02:00
Rastislav Vysoky
46ad71d940
Merge branch 'ripplebiz:dev' into dev
2025-08-02 20:54:26 +02:00
recrof
230b1688ac
pin the pioarduino version to last working one
2025-08-02 16:26:21 +02:00
ripplebiz
5b4daef097
Merge pull request #564 from oltaco/fix-wiotracker-l1-board
...
WioTracker L1 various fixes
2025-08-02 19:36:57 +10:00
taco
4991269844
fix: wrong QSPI pins for wio tracker l1
2025-08-02 04:07:07 +10:00
Scott Powell
f44a2ce6ea
* fix: init rx_air_time to 0
2025-08-01 20:05:37 +10:00
ripplebiz
51b5d126a9
Merge pull request #563 from Cisien/cisien/add-rx-time
...
Add a counter to track rx time for repeater stats
2025-08-01 19:59:20 +10:00
Scott Powell
8bef2e75a6
* new CommonCLI commands: "get prv.key", "set prv.key {hex}"
2025-08-01 19:28:44 +10:00
ripplebiz
d74482f061
Merge pull request #547 from fdlamotte/sensors_gpio
...
sensors: gpio command
2025-08-01 19:06:44 +10:00
Scott Powell
a457a5af77
* CMD_SEND_PATH_DISCOVERY_REQ: now force the sendRequest() to use flood mode
2025-07-31 14:38:11 +10:00
Scott Powell
36cfc506ca
* REQ_TYPE_GET_TELEMETRY_DATA, first reserved byte (of 4) is now inverse mask to apply to permissions
2025-07-31 13:45:53 +10:00
Scott Powell
2b30d3a2aa
* Companion: experimental CMD_SEND_DISCOVERY_REQ -> PUSH_CODE_DISCOVERY_RESPONSE
2025-07-31 13:04:16 +10:00
taco
015491d0c4
fix: Wio Tracker L1: use correct max ram and flash size for S140 v7.3.0 softdevice
2025-07-31 07:03:58 +10:00
Chris
142cd33e2d
Add a counter to track rx time for repeater stats
2025-07-30 09:41:20 -07:00
Scott Powell
cd83a341a9
* companion: fix for CMD_IMPORT_PRIVATE_KEY, to re-calc shared secrets
2025-07-30 16:00:47 +10:00
Scott Powell
07657a9195
* companion: bug fix for CMD_ADD_UPDATE_CONTACT
2025-07-30 14:57:38 +10:00
ripplebiz
f8069d7dc6
Merge pull request #559 from 446564/wsl3-usb-comp
...
add wsl3 usb companion
2025-07-30 14:12:43 +10:00
446564
451a3da69c
add wsl3 usb companion
2025-07-29 15:56:07 -07:00
João Brázio
885a04b4db
Merge remote-tracking branch 'origin/dev' into jbrazio/2025_3f11ad35
2025-07-29 00:31:52 +01:00
ripplebiz
f8202ea573
Merge pull request #558 from mkudlacek/dev
...
Added support for TI INA260 and Sensirion SHT4x
2025-07-28 23:10:38 +10:00
Martin Kudlacek
8417f8a5f5
Support for Sensirion SHT4x
2025-07-28 10:02:31 +02:00
Martin Kudlacek
4e0ec6c3de
Added support for TI INA260
2025-07-28 09:41:06 +02:00
ripplebiz
11fdb3c4df
Merge pull request #554 from oltaco/esm-bmp280-altitude-fix
...
fix: use correct library for BMP280 altitude read
2025-07-28 15:02:42 +10:00
taco
01348b274e
fix: BMP280 altitude was using incorrect library
2025-07-28 11:29:55 +10:00
Scott Powell
fc6d731a0e
Revert "disable led light on t-echo device"
...
This reverts commit 6b48720947 .
2025-07-27 20:38:20 +10:00
ripplebiz
0ac9d28b8c
Merge pull request #553 from ch4r13/main
...
Disable LED lights on t-echo device
2025-07-27 17:54:26 +10:00
ripplebiz
631bd472f1
Merge pull request #552 from recrof/dev
...
promicro: added sensor role, removed non-functional llcc68 variant envs
2025-07-27 17:53:47 +10:00
TasmanDevil
6b48720947
disable led light on t-echo device
2025-07-25 22:53:56 +02:00
Rastislav Vysoky
a3204a0d32
Merge branch 'ripplebiz:dev' into dev
2025-07-25 15:10:15 +02:00
Scott Powell
0025d7c01c
* Companion: CMD_ADD_UPDATE_CONTACT now with optional extra 'last_mod' timestamp
2025-07-25 22:59:48 +10:00
recrof
cd07274c61
promicro: added sensor role
2025-07-24 17:37:35 +02:00
Scott Powell
37dd562a49
Merge branch 'dev'
2025-07-24 20:31:13 +10:00
Scott Powell
02e89aafa4
* ver bump to 1.7.4
2025-07-24 20:30:35 +10:00
ripplebiz
d5bbf867ab
Merge pull request #548 from recrof/dev
...
SenseCap Solar compilation fix: bad linker directory; added companion ble and usb roles
2025-07-24 19:40:05 +10:00
Rastislav Vysoky
6ebb6b3a88
Merge branch 'ripplebiz:dev' into dev
2025-07-24 09:38:41 +02:00
Scott Powell
e7cfd3d64d
* CommonCLI: reverted "set radio ..." command, added new "tempradio ..." command
2025-07-23 22:04:47 +10:00
Scott Powell
22efc0e72f
* CommonCLI: "set radio " now with optional 5th param timeout_mins, for applying temporary radio params for that many mins
...
* "advert" command now with longer delay, so that CLI reply is sent first
2025-07-23 21:40:37 +10:00
Rastislav Vysoky
6099103352
Merge branch 'ripplebiz:dev' into dev
2025-07-23 12:18:05 +02:00
recrof
82e74cf985
fix: bad linker directory; added companion ble and usb roles
2025-07-23 12:17:40 +02:00
Florent
da9d2e3591
sensors: gpio apply masks
2025-07-23 08:02:57 +02:00
ripplebiz
5c220f7fe9
Merge pull request #541 from recrof/dev
...
enable all ESM sensors on RAK4631
2025-07-23 13:44:23 +10:00
Florent
c320999283
sensors: gpio command
2025-07-22 21:08:15 +02:00
ripplebiz
9a105c9512
Merge pull request #540 from oltaco/wiotrackerl1-pinfix
...
Wio Tracker L1: fix incorrect joystick pin.
2025-07-21 23:47:41 +10:00
recrof
3634a21de5
enable all sensors on RAK4631
2025-07-21 15:30:14 +02:00
taco
9c4a0d09eb
fix: Wio Tracker L1: correct joystick press button pin
2025-07-21 18:17:32 +10:00
ripplebiz
86a0585a49
Merge pull request #539 from liamcottle/fix/missed-packets
...
Start receive immediately after packet received
2025-07-20 21:57:44 +10:00
liamcottle
4cec4b05ff
start rx again immediately after receive
2025-07-20 23:27:54 +12:00
ripplebiz
a52c5db192
Merge pull request #538 from oltaco/ct62-std-init
...
Heltec CT62: use radio.std_init()
2025-07-19 17:25:10 +10:00
taco
baac305045
radio.std_init() for heltec ct62
2025-07-19 16:09:54 +10:00
ripplebiz
8e06324bb5
Merge pull request #534 from mikenz/heltec-v3-sensor
...
Allow the SDA and SCL pins for Environment sensors to be configured independently of the OLED I2C
2025-07-18 20:33:48 +10:00
ripplebiz
47f876cd24
Merge pull request #535 from fdlamotte/rak3x72_sensor
...
rak3x72: sensor target
2025-07-18 20:25:20 +10:00
Florent
76ed6edfbc
rak3x72: sensor target
2025-07-18 12:18:03 +02:00
Mike Cochrane
566c74b835
Add VL53L0X time-of-flight distance sensor to Heltec V3 Sensor
2025-07-18 22:01:47 +12:00
Mike Cochrane
ca43eb12cb
Add Melexis Contact-less Infrared Sensor - MLX90614 to Heltec V3 Sensor
2025-07-18 18:51:00 +12:00
Mike Cochrane
04551b6678
Allow the SDA and SCL pins for Environment sensors to be configured independantly. Add Heltec V3 Sensor.
2025-07-18 18:16:59 +12:00
Scott Powell
e3e11c44af
* updates to packet/payload structure docs
2025-07-18 12:56:31 +10:00
ripplebiz
f159d7db08
Merge pull request #531 from cod3doomy/dev
...
RAK4631 ESM Migration
2025-07-18 11:53:48 +10:00
cod3doomy
d9897a16c2
Cleanup and fixes
...
-Added RAK_4631 define back
-Added includes for common RAK sensors that are currently supported in ESM
-Set global variables to static
-Reduced delay time within the RAK gps init sequence
2025-07-17 10:42:18 -07:00
cod3doomy
57e0534178
Merge branch 'ripplebiz:dev' into dev
2025-07-17 08:49:02 -07:00
ripplebiz
dbb17494db
Merge pull request #521 from recrof/dev
...
cleanup: move radiolib wrappers to dedicated directory
2025-07-17 13:49:58 +10:00
cod3doomy
c1788c3350
RAK4631 ESM Migration
...
Changes to migrate sensor code to the ESM.
Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501)
Removed the GPS specific envs from platformio.ini and enabled GPS for all envs.
Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.
2025-07-16 19:04:50 -07:00
Rastislav Vysoky
3d850af3ac
Merge branch 'ripplebiz:dev' into dev
2025-07-16 20:05:21 +02:00
ripplebiz
2e3aae020a
Merge pull request #529 from marcelverdult/patch-1
...
Fixed Barometric Pressure Reading for BMP280
2025-07-16 23:06:37 +10:00
ripplebiz
f7b14dc5f8
Merge pull request #527 from oltaco/wio-tracker-l1-radiofix
...
fix: Wio Tracker L1: add DIO2 as rfSwitch and correct TCXO voltage.
2025-07-16 23:05:47 +10:00
ripplebiz
042695a754
Merge pull request #526 from oltaco/uitask-add-gps-alert
...
add GPS UI alert to quad-press
2025-07-16 23:04:39 +10:00
marcelverdult
f052cbbfb0
Fixed Barometric Pressure Reading for BMP280
...
Measurement has to be divided by 100 same as BME280
2025-07-16 13:50:23 +02:00
Scott Powell
bd35daf4ca
* sensor: "setperm {pubkey-hex} 0" command can now remove by partial pubkey
...
* sensor: login with blank password now just checks if sender is in ACL, and returns permissions (if so)
2025-07-16 21:16:05 +10:00
Scott Powell
64adc557e6
* companion: optional double ACKs, new prefs.multi_acks
2025-07-16 19:25:28 +10:00
Scott Powell
51eae0bf6f
* CommonCLI: new "multi.acks" config setting
2025-07-16 18:51:18 +10:00
Scott Powell
43eaf7195b
Merge branch 'dev' into double-acks
2025-07-16 18:02:41 +10:00
Scott Powell
6e07e6fec5
* Sensor permission levels renamed. Misc sensor fixes.
2025-07-16 14:18:05 +10:00
taco
1b1fc45567
fix: Wio Tracker L1: add DIO2 as rfSwitch and correct TCXO voltage.
2025-07-16 12:25:16 +10:00
taco
bf3e489275
add GPS UI alert to quad-press
2025-07-16 10:35:48 +10:00
Rastislav Vysoky
4596dfdf30
Merge branch 'ripplebiz:dev' into dev
2025-07-15 12:19:51 +02:00
Scott Powell
429721a47e
Merge branch 'dev' into double-acks
2025-07-15 17:02:20 +10:00
Scott Powell
99cf7dc6f5
Merge branch 'dev'
2025-07-15 16:00:11 +10:00
Scott Powell
a6067daba7
* ver bump
2025-07-15 15:59:10 +10:00
Scott Powell
b4f8379663
* companion: added CMD_FACTORY_RESET (51)
2025-07-15 15:56:59 +10:00
Scott Powell
f5f03ef00e
* simple_sensor: redesigned permissions
...
* companion: PUSH_CODE_LOGIN_SUCCESS now has extra byte in frame for ACL permissions
2025-07-15 15:05:38 +10:00
Scott Powell
aff4a8864f
* companion: serial protocol ver bump (FIRMWARE_VER_CODE) now 7
2025-07-14 13:09:22 +10:00
Scott Powell
ae82897fbd
* companion: reverted PUSH_CODE_TELEMETRY_RESPONSE, added new PUSH_CODE_BINARY_RESPONSE
2025-07-14 12:46:51 +10:00
Scott Powell
f47f3214bc
* companion: added CMD_SEND_BINARY_REQ (50)
2025-07-14 12:25:34 +10:00
ripplebiz
c50d301c9d
Merge pull request #523 from recrof/patch-12
...
sensecap_solar: disable GPS until it's supported
2025-07-14 10:51:38 +10:00
Scott Powell
605cc1746e
Merge commit 'd7248a96103ca8c0b1f3e9b3dd0c833bcc3b091e' into dev
2025-07-14 10:50:23 +10:00
ripplebiz
d7248a9610
Merge pull request #522 from recrof/patch-11
...
Heltec Wireless Paper fix: radio init failed: -2
2025-07-14 10:49:12 +10:00
Scott Powell
8362ecd8e2
* Sensor: "get acl" command
2025-07-14 10:12:27 +10:00
Rastislav Vysoky
90bc7960a2
sensecap_solar: disable GPS until it's supported
2025-07-13 22:41:27 +02:00
Rastislav Vysoky
51c8ef4ae3
Heltec Wireless Paper fix: radio init failed: -2
2025-07-13 15:21:02 +02:00
Rastislav Vysoky
f5f9cff3fd
Merge branch 'ripplebiz:dev' into dev
2025-07-13 11:39:02 +02:00
recrof
0974974914
Merge branch 'dev' of github.com:recrof/MeshCore into dev
2025-07-13 11:37:58 +02:00
recrof
398736dccf
move radiolib wrappers to dedicated directory
2025-07-13 11:37:33 +02:00
Scott Powell
8c49467b6d
* simple_sensor: new REQ_TYPE_GET_ACCESS_LIST
2025-07-13 18:50:52 +10:00
Scott Powell
11b15d925e
* simple_sensor: handleCustomCommand() hook
2025-07-13 15:30:49 +10:00
ripplebiz
b2f61db364
Merge pull request #517 from recrof/dev
...
platformio.ini cleanup: move rak to nrf52_core, remove nrf52840_core
2025-07-13 14:47:21 +10:00
recrof
25962757b7
move rak to nrf52_core, remove nrf52840_core
2025-07-12 20:06:56 +02:00
Scott Powell
c4f0f1eede
* simple_sensor: added alert send queue, with retries, checks for ACKs, etc. Low pri alerts only 1 send attempt, otherwise 4 attempts
2025-07-12 12:26:16 +10:00
Scott Powell
ba7bbbdf54
Merge branch 'dev' into double-acks
2025-07-12 10:36:03 +10:00
ripplebiz
4bde96f662
Merge pull request #511 from oltaco/wio-tracker-l1
...
Seeed Wio Tracker L1: initial support
2025-07-11 21:31:39 +10:00
ripplebiz
fd915d355f
Merge pull request #514 from recrof/patch-10
...
replaced Andy Kirby's discord with MeshCore discord.
2025-07-11 21:22:35 +10:00
ripplebiz
b14e4fd72e
Merge pull request #513 from recrof/patch-9
...
faq: fix broken links, replace discord link from Andy's discord to MeshCore discord
2025-07-11 21:21:06 +10:00
Rastislav Vysoky
5224c14339
replaced Andy Kirby's discord with MeshCore discord.
2025-07-11 11:39:50 +02:00
Rastislav Vysoky
3d27c3e050
faq: fix broken links, replace discord link from Andy's discord to MeshCore discord
2025-07-11 11:37:01 +02:00
taco
ebe9b3e855
Seeed Wio Tracker L1: initial support
2025-07-11 01:08:38 +10:00
ripplebiz
9baa99e994
Merge pull request #503 from fdlamotte/buzzer--disable-when-quiet
...
Buzzer disable when quiet
2025-07-10 14:58:42 +10:00
ripplebiz
9d22a96d01
Merge pull request #506 from 446564/cleanup-rak4631
...
move rak4631 specific files into variant folder
2025-07-10 14:55:05 +10:00
ripplebiz
c14da0e297
Merge pull request #508 from ngavars/cleanup-minewsemi
...
Clean up Minewsemi ME25LS01 variant
2025-07-10 14:54:20 +10:00
ripplebiz
8db3eeafeb
Merge pull request #507 from ngavars/cleanup-promicro
...
Clean up Promicro variant
2025-07-10 14:53:47 +10:00
ripplebiz
5118f09d17
Merge pull request #505 from fdlamotte/wio_e5_mini_sensor
...
wio-e5-mini: simple_sensor target
2025-07-10 14:51:48 +10:00
Normunds Gavars
34b2ce9f2e
393 clean up Minewsemi ME25LS01 variant
2025-07-10 00:55:38 +03:00
Normunds Gavars
5afdb175c4
393 clean up Promicro variant
2025-07-10 00:08:59 +03:00
Rob Loranger
6725f2993e
move rak4631 specific files into variant folder
2025-07-09 10:21:24 -07:00
Florent
fbf15ff8eb
wio-e5-mini: simple_sensor target
2025-07-09 17:22:31 +02:00
Scott Powell
41d285535a
* companion: added CMD_GET_TUNING_PARAMS -> RESP_CODE_TUNING_PARAMS
2025-07-09 23:10:33 +10:00
João Brázio
9e342de490
Refactor serial bridge handling
2025-07-09 11:03:35 +01:00
Scott Powell
fa06dee97c
* sensor node: now have two alert priorities, LO, HI
2025-07-09 15:50:36 +10:00
Scott Powell
b574709030
Merge branch 'dev' into double-acks
2025-07-09 14:59:25 +10:00
ripplebiz
e90b4a5e99
Merge pull request #504 from jaspersonneveldt/dev
...
Changed the Barometric Pressure value for the BME280 sensor since it was a factor 100 to high
2025-07-09 14:35:23 +10:00
João Brázio
6d6396c589
More robust handling of pkt len
2025-07-08 21:45:49 +01:00
jasper
6f8ad5766a
Changed the Barometric Pressure value since it was a factor 100 to high
2025-07-08 21:16:03 +02:00
João Brázio
f36fb64f65
Add null check for packet allocation and clean up Dispatcher
2025-07-08 16:02:10 +01:00
Scott Powell
7954e8fb1b
* misc
2025-07-08 23:19:35 +10:00
Scott Powell
44ae1d42b5
* misc fixes
2025-07-08 23:19:35 +10:00
Scott Powell
5ac7b9e03d
* implemented encoding responses to REQ_TYPE_GET_AVG_MIN_MAX
2025-07-08 23:19:35 +10:00
Scott Powell
25bde77afb
* implemented getter methods for telemetry value types
2025-07-08 23:19:35 +10:00
Scott Powell
8c56e9901f
* refactor: CommonCLI, processing of optional command prefix moved to handleCommand() call sites
...
* Sensor, anon_req now just for admin login (guest password now unused)
* special CLI command, "setperm {pubkey-hex} {permissions-int16}" for admin(s) to manage user access (permissions 0 = remove)
2025-07-08 23:19:35 +10:00
Scott Powell
3bb33a8017
* simplified alertIf()
...
* refactored TimeSeriesData to top-level class
2025-07-08 23:19:35 +10:00
Scott Powell
a7f8ac6b9d
* added REQ_TYPE_GET_AVG_MIN_MAX
...
* TimeSeriesData
* very basic SensorMesh::sendAlert()
2025-07-08 23:19:35 +10:00
Scott Powell
1c9194181a
* Mesh::onAnonDataRecv() slight optimisation, so that shared-secret calc doesn't need to be repeated
...
* SensporMesh: req_type now optionally encoded in anon_req payload (so can send various requests without a prior login)
2025-07-08 23:19:35 +10:00
Scott Powell
2df34a67b1
* first cut of new simple_sensor sketch
2025-07-08 23:19:34 +10:00
João Brázio
30de4db0a4
Remove serial bridge implementation and implement simplified version directly in the repeater source code.
2025-07-08 14:04:21 +01:00
Scott Powell
63337ec088
* XiaoC3 custom, .ini fixes
2025-07-08 22:59:07 +10:00
Scott Powell
169d33290e
Merge branch 'dev' into double-acks
2025-07-08 22:14:48 +10:00
Florent
60aad74b26
buzzer: disable when quiet
2025-07-08 14:01:31 +02:00
ripplebiz
ec104fd01b
Merge pull request #502 from jankowski-t/main
...
Migrate Meshadventurer to std_init()
2025-07-08 15:39:20 +10:00
jankowski-t
bb204c8aa6
Migrate Meshadventurer to std_init()
2025-07-07 18:33:31 +02:00
ripplebiz
4a7d88411c
Merge pull request #501 from fdlamotte/xiao_c3--small-fixups
...
xiao_c3: small fixups
2025-07-07 23:39:58 +10:00
Florent de Lamotte
01f9f3e34f
xiao_c3: small fixups
2025-07-07 10:41:29 +02:00
ripplebiz
63e79e0ca6
Merge pull request #500 from liamcottle/fix/nrf52-ble-refactor
...
Refactor nRF52 BLE to use connection callbacks
2025-07-07 17:00:24 +10:00
liamcottle
72ffaeed35
refactor nrf52 ble to use callbacks
2025-07-07 16:36:55 +12:00
ripplebiz
3b02e97c9c
Merge pull request #499 from jrkalf/dev
...
Xiao ESP32 C3 updates
2025-07-07 14:28:12 +10:00
ripplebiz
a3601d6440
Merge pull request #495 from recrof/dev
...
Seeed SenseCap Solar: correct LED behaviour: Lit when TX
2025-07-07 14:23:55 +10:00
ripplebiz
252c63c9fe
Merge pull request #496 from recrof/patch-8
...
remove hardware compatibility list - it was outdated.
2025-07-07 14:20:08 +10:00
ripplebiz
d64d1c45ed
Merge pull request #490 from Noki/tbeam-sx1262-room
...
add room server role for TBeam SX1262
2025-07-07 14:19:33 +10:00
Jelle Kalf
22c41e097d
Xiao ESP32 C3:
...
* Fixed pins for mainstream wio sx1262
* Moved previous sx1262 support to _custom version
* companion firmware added
2025-07-06 19:52:12 +02:00
Rastislav Vysoky
dfc1596af9
remove hardware compatibility list - it was outdated.
2025-07-06 17:40:52 +02:00
recrof
316cebc171
Merge branch 'dev' of github.com:recrof/MeshCore into dev
2025-07-06 15:23:35 +02:00
recrof
8700378b3a
Seeed SenseCap Solar: invert leds
2025-07-06 15:22:51 +02:00
ripplebiz
3cd4d46645
Merge pull request #493 from liamcottle/fix/cli-messages
...
Don't show CLI replies on display
2025-07-06 17:54:18 +10:00
liamcottle
70881f56ce
tidy logic for devices with display
2025-07-06 14:16:43 +12:00
liamcottle
c40563ff53
dont show cli data replies on display
2025-07-06 14:07:56 +12:00
Tobias Schwarz
f0d55a5f8c
add room server role for TBeam SX1262
2025-07-05 16:08:49 +02:00
ripplebiz
516579c395
Merge pull request #475 from rightup/NRF52-BLE-FIX
...
Remove ScanResponse.addName() to fix re-advertising after disconnect
2025-07-05 22:02:27 +10:00
ripplebiz
54868015df
Merge pull request #474 from ngavars/dev
...
Add support for Minewsemi ME25LS01
2025-07-05 20:48:05 +10:00
ripplebiz
4d8e90aa8e
Merge pull request #484 from liquidraver/dev
...
LR's (corrected) calculation instead of SX and minor changes
2025-07-05 20:38:42 +10:00
Lloyd
e4ac3a7d39
Manually restart BLE advertising after disconnect to prevent stack freeze
...
Replaced use of `restartOnDisconnect(true)` with explicit (existing) manual re-advertising logic.
This avoids Bluetooth stack instability caused by overlapping advertising state,
Changes:
- Added explicit `Bluefruit.Advertising.stop()` and data clears in `startAdv()`
- Disabled automatic restart with `restartOnDisconnect(false)`
- Re-advertising now fully handled in `checkRecvFrame()` loop
Tested on: iPhone, Android, Windows, and Chrome – confirmed stable reconnects and name visibility.
2025-07-04 21:07:55 +01:00
Normunds Gavars
dac76fb167
Read battery voltage on Minewsemi ME25LS01
2025-07-04 19:27:11 +03:00
liquidraver
ee7aa4341c
LR's corrected calculation override (instead of SX) and minor changes according to radiolib's wiki
2025-07-04 16:40:19 +02:00
ripplebiz
2a264f1781
Merge pull request #482 from recrof/dev
...
initial support for Seeed Studio SenseCap Solar board
2025-07-05 00:31:23 +10:00
ripplebiz
d3b3b8bf6f
Merge pull request #483 from fdlamotte/stm32_preamble
...
stm32 targets: set preamble to 16
2025-07-04 23:57:43 +10:00
Florent de Lamotte
e3804c9b48
stm32 targets: set preamble to 16
2025-07-04 15:42:56 +02:00
recrof
0cb940b2f9
initial support for Seeed Studio SenseCap Solar board
2025-07-04 15:03:25 +02:00
Scott Powell
22939e0a25
* added RADIOLIB_EXLUDE_'s for faster builds
2025-07-04 21:33:07 +10:00
João Brázio
abcb1797b7
Merge remote-tracking branch 'upstream/dev' into jbrazio/2025_3f11ad35
2025-07-04 11:57:09 +01:00
ripplebiz
22ac8e264f
Merge pull request #479 from 446564/cleanup-xio-nrf
...
cleanup xiao nrf52
2025-07-04 16:18:14 +10:00
ripplebiz
08c95f1f31
Merge pull request #481 from oltaco/heltecV3-gps_pin_fix
...
fix: Heltec V3 amended GPS pins
2025-07-04 15:49:08 +10:00
taco
2cb31a44e2
fix: heltec v3: change gps enable pin
2025-07-04 14:12:57 +10:00
taco
616a6418c0
fix: change GPS pins
...
Pin 45 and 46 are strapping pins on ESP32-S3, which can lead to unintended consequences on boot. I have amended the pins and added an enable pin as well.
2025-07-04 13:55:39 +10:00
ripplebiz
526e9b4291
Merge pull request #476 from WattleFoxxo/xiao-rp2040
...
Adds support for the XIAO-RP2040 board
2025-07-04 10:08:31 +10:00
ripplebiz
fe02aefa15
Merge pull request #471 from 446564/rak-usr-btn
...
move rak usr btn to companions
2025-07-04 10:03:26 +10:00
ripplebiz
1cc909b071
Merge pull request #468 from recrof/dev
...
EnvironmentSensorManager: add support for SHTC3 and LPS22HB
2025-07-04 07:36:22 +10:00
Rob Loranger
2cfa2a7057
clean up xiao nrf52
...
move variant specific code out of src/helpers
redefine RXEN for alternate radio pinout
2025-07-03 09:18:26 -07:00
Rastislav Vysoky
1f8a6811a0
Merge branch 'ripplebiz:dev' into dev
2025-07-03 15:07:16 +02:00
Scott Powell
ee3ef99ce0
Merge branch 'LR1110-workaround' into dev
2025-07-03 19:38:20 +10:00
ripplebiz
15e7d66486
Merge pull request #469 from jquatier/heltec-paper-include-fix
...
Fixing radio include and BT pin for Heltec Paper
2025-07-03 16:43:18 +10:00
WattleFoxxo
83630eb87a
Add XIAO RP2040 support
2025-07-03 11:42:53 +10:00
Lloyd
10d455b1d8
BLE: Remove ScanResponse.addName() to fix re-advertising after disconnect
...
Removed the call to Bluefruit.ScanResponse.addName() in startAdv(), as it was preventing BLE from reliably restarting advertising after a disconnect.
Hypothesis: adding the device name to the scan response exceeds internal buffer limits or causes a conflict with advertising timing, leading to the BLE stack silently failing to re-advertise.
Tested successfully (on T-1000) without this line, advertising now resumes correctly after disconnection (on Iphone)
2025-07-02 23:41:31 +01:00
JQ
3ceb75e00d
fix ble pin
2025-07-02 14:37:11 -07:00
Normunds Gavars
e97bcab5f5
Merge branch 'dev' into minewsemi-me25ls01
2025-07-03 00:14:39 +03:00
Normunds Gavars
574080ad6a
Clean up pins in variant.h
2025-07-03 00:07:50 +03:00
Rob Loranger
09114e566a
move rak usr btn to companions
...
repeaters do not typically have user buttons and
there is only one analog pin available on most, if
not all, base boards. so this allows repeaters to
add custom peripherals or alternate battery signals
2025-07-02 10:24:45 -07:00
JQ
7fe8d2226e
fixing radio include order for heltec paper
2025-07-02 08:32:36 -07:00
recrof
b85afd4b4f
removed unsupported(?) readAltitude
2025-07-02 16:50:47 +02:00
recrof
2001585677
EnvironmentSensorManager: add support for SHTC3 and LPS22HB
2025-07-02 16:42:35 +02:00
Scott Powell
0746700fc3
Merge branch 'dev'
2025-07-02 21:11:38 +10:00
Scott Powell
0f9535d15b
* ver bump to v1.7.2
2025-07-02 21:11:07 +10:00
Normunds Gavars
e2e1e464f5
Use EnvironmentSensorManager in Minewsemi variant
2025-07-02 12:27:39 +03:00
ripplebiz
727ea404bc
Merge pull request #467 from LitBomb/patch-14
...
Update faq.md
2025-07-02 15:26:48 +10:00
uncle lit
833a09516d
Update faq.md
...
- rewrite Linux firmware update with more detailed instructions
- fix T114 reset typo: double click twice, not once
- add link reference to MeshCore logo on github
- add public channel key for t-deck to the t-deck section
- reference the verbiage "what is meshcore?" on meshcore.co.uk homepage
2025-07-01 22:04:16 -07:00
ripplebiz
279deecceb
Merge pull request #465 from fdlamotte/t1000e_preamble_16
...
t1000e: set preamble to 16 at init
2025-07-01 23:56:24 +10:00
Florent de Lamotte
fe65995b42
t1000e: set preamble to 16 at init
2025-07-01 15:42:54 +02:00
ripplebiz
6a8093a57f
Merge pull request #455 from jquatier/wireless-paper
...
Initial Support for Heltec Wireless Paper
2025-07-01 15:23:58 +10:00
ripplebiz
cb646dd2dd
Merge pull request #426 from 446564/feat-GH109
...
allows manual BLE pin even when device has display
2025-07-01 15:09:43 +10:00
ripplebiz
82b0bbea1e
Merge pull request #464 from oltaco/lilygo_t3s3-radio.std_init
...
refactor: lilygo_t3s3 with CustomSX1262::std_init()
2025-07-01 12:26:43 +10:00
Normunds Gavars
a0ad222593
Add Minewsemi ME25LS01 variant
2025-07-01 01:56:34 +03:00
Scott Powell
eec347efa5
* PAYLOAD_TYPE_PATH: reserving upper 4 bits if 'extra_type' field, for future use
2025-06-30 23:18:16 +10:00
Scott Powell
c2abd3d00e
* CustomLR1110::getTimeOnAir(), copied from sx1262
2025-06-30 18:57:24 +10:00
Scott Powell
2f182a717f
Merge branch 'main' into dev
2025-06-30 17:07:01 +10:00
ripplebiz
6e6ae0ea3f
Merge pull request #463 from jankowski-t/main
...
Support MeshAdventurer
2025-06-30 17:06:19 +10:00
ripplebiz
99edb61cf5
Merge pull request #462 from seagull9000/Refactor-Heltec-Tracker-radiolib-init
...
Refactor radiolib for Heltec Wireless Tracker
2025-06-30 17:01:55 +10:00
jankowski-t
66c095d2f0
Fixed MeshAdventurer repeater build failing
...
Update build_src_filter in platformio.ini
2025-06-30 05:40:07 +02:00
jankowski-t
4d7e5d96c0
Support MeshAdventurer
...
Added support for MeshAdventurer, including radio, display, button, GPS, voltage reading
2025-06-30 03:46:18 +02:00
taco
e84c58d61f
refactor: lilgo_t3s3 with CustomSX1262::std_init()
2025-06-30 08:51:18 +10:00
seagull9000
32bdbfd79b
Refactor radiolib for Heltec Wireless Tracker
...
Made changes and tested transmission and reception.
Note:
TX to T1000E would not work direct, but always went through a repeater.
TX to two Thinknode M1's went through direct..
2025-06-30 09:48:18 +12:00
João Brázio
f0754674b1
Add config flags to variants
2025-06-29 16:28:11 +01:00
ripplebiz
5b28241405
Merge pull request #459 from liquidraver/dev
...
change fixed preamble to match the new 16
2025-06-30 00:26:19 +10:00
liquidraver
f3b7eaddff
change fixed preamble to match the new 16
2025-06-29 15:17:15 +02:00
Scott Powell
88074dbd1e
Merge branch 'dev' into double-acks
2025-06-29 21:10:43 +10:00
Scott Powell
827d2771d1
* ver bump to v1.7.1
2025-06-29 20:06:24 +10:00
Scott Powell
c05531c016
Merge branch 'main' into dev
2025-06-29 20:04:03 +10:00
Scott Powell
90c31465b6
* Preamble now 16 (for most variants)
2025-06-29 20:03:10 +10:00
ripplebiz
424c1a6771
Merge pull request #456 from recrof/dev
...
add support for BMP280 temperature+pressure sensor, enable sensor support for tlora 2.1_1.6
2025-06-29 15:28:31 +10:00
recrof
acff8885e0
fix: missing dependency
2025-06-29 00:28:01 +02:00
recrof
2255ece665
add support for BMP280 temperature+pressure sensor
2025-06-29 00:17:46 +02:00
ripplebiz
c5c828b0d7
Merge pull request #453 from recrof/dev
...
sx1276 boards: migrate to std_init()
2025-06-28 21:14:23 +10:00
Rastislav Vysoky
683699bbee
Merge branch 'ripplebiz:dev' into dev
2025-06-28 11:03:15 +02:00
recrof
cca512f01d
remove spi.begin in targets
2025-06-28 11:00:13 +02:00
JQ
a219284ee1
formatting
2025-06-27 23:30:52 -07:00
Scott Powell
6b76546dcf
* minor tidy ups
2025-06-28 16:10:53 +10:00
ripplebiz
eb3ba0c2c3
Merge pull request #446 from cod3doomy/dev
...
RAK4631: BME680 add and GPS cleanup
2025-06-28 16:00:36 +10:00
JQ
4f3016dd25
wireless paper board support
2025-06-27 22:57:49 -07:00
João Brázio
20827ca901
Serial bridge implementation
2025-06-27 20:16:14 +01:00
recrof
8aadc00368
remove old tbeam def
2025-06-27 17:38:07 +02:00
recrof
ca822d9be3
manual-merge tbeam conflicts
2025-06-27 15:30:01 +02:00
recrof
e5fea790e3
RadioWrapper::std_init: add tbeam, unify coding style
2025-06-27 15:17:51 +02:00
recrof
5da8997a13
RadioWrapper::std_init: add missing definitions for rx/tx switching
2025-06-27 15:16:37 +02:00
recrof
e27a8d49fe
sx1276 boards: migrate to std_init()
2025-06-27 15:12:48 +02:00
ripplebiz
1434f18b6d
Merge pull request #452 from fdlamotte/custom_sx1262_TXEN_fix
...
CustomSX1262: fix typo that would prevent compile when TXEN or RXEN i…
2025-06-27 21:37:57 +10:00
Florent de Lamotte
99899edc16
CustomSX1262: fix typo that would prevent compile when TXEN or RXEN is not set
2025-06-27 11:11:12 +02:00
ripplebiz
a2522a141b
Merge pull request #451 from fdlamotte/wio-e5-dev_uart
...
wio-e5-sdk: adjust uart location
2025-06-26 21:51:11 +10:00
Florent
fc8ff74267
wio-e5-sdk: adjust uart location
2025-06-26 13:04:15 +02:00
cod3doomy
425414661d
String removed
...
Removed all string type casting
2025-06-25 21:12:36 -07:00
cod3doomy
fb2de3a595
Merge branch 'ripplebiz:dev' into dev
2025-06-25 21:08:38 -07:00
ripplebiz
bcb8e7b38c
Merge pull request #450 from rfmoz/main
...
Update faq.md
2025-06-26 13:16:14 +10:00
ripplebiz
27f602808c
Merge pull request #449 from recrof/dev
...
Station G2 refactor for radio.std_init, set max tx power to 19dBm
2025-06-26 13:10:06 +10:00
Ricardo F.
71ae155ec8
Update faq.md
...
Order last other questions and add fix to WebFlasher from linux
2025-06-25 22:41:14 +02:00
recrof
7c0adbb656
Station G2 refactor for radio.std_init, set max tx power to 19dBm
2025-06-25 22:21:22 +02:00
ripplebiz
79d2975bc0
Merge pull request #448 from fdlamotte/rak3x72_LP_Support
...
rak3x72: support variations in platformio.ini
2025-06-25 22:27:06 +10:00
Florent
0c71695c84
rak3x72: support variations in platformio.ini
2025-06-25 13:55:54 +02:00
ripplebiz
0bf5a0c570
Merge pull request #447 from fdlamotte/stm32_halt_reset
...
stm32: implement halt and reset
2025-06-25 19:04:15 +10:00
Scott Powell
fb1f329976
* RAK: 'start ota' returned MAC address was reversed
2025-06-25 19:02:16 +10:00
Florent
80f8c1f623
stm32: implement halt and reset
2025-06-25 11:00:24 +02:00
Scott Powell
d65ce3dd77
* ESP32Board: added support for Neopixel TX led
2025-06-25 14:54:13 +10:00
Scott Powell
d0a99c5cfb
* new variant board: Tenstar C3
2025-06-25 14:34:27 +10:00
Scott Powell
80ed214dd0
* Fix: /helpers/esp32/TBeamBoard was breaking non-TBeam builds
2025-06-25 14:04:29 +10:00
Scott Powell
dfba0e87e7
Merge branch 'dev' into double-acks
2025-06-25 13:52:11 +10:00
cod3doomy
6a0a84f0c8
RAK4631: BME680 add and GPS cleanup
...
- Added the BME680 environment sensor functionality
- Added the GPS Repeater env for those wanting it
- Cleaned up the GPS and other RAK4631SensorManager code
Verified build and functionality on normal and GPS repeater and companion envs.
IAQ readout is still a work in progress, but a placeholder can be seen on Channel 2 of the app telemetry.
2025-06-24 17:46:01 -07:00
ripplebiz
2589b19d17
Merge pull request #443 from fdlamotte/wio_e5_mini_rescue_cli
...
wio_e5_mini: led and rescue cli
2025-06-24 23:30:52 +10:00
Florent
b68fac88dd
wio_e5_mini: led and rescue cli
2025-06-24 14:34:42 +02:00
Scott Powell
ef2efd94aa
Merge branch 'dev' into double-acks
2025-06-24 13:07:36 +10:00
ripplebiz
8929c79198
Merge pull request #442 from oltaco/env-sens-manage-gps-revert
...
Fix: EnvironmentSensorManager.cpp: revert swapped GPS pins
2025-06-24 12:44:19 +10:00
taco
5b964e7c74
fix: revert swapped GPS pins
...
reverted GPS pin behaviour and swapped GPS pins for tbeam variants.
2025-06-24 12:39:07 +10:00
Scott Powell
f64ef29706
Merge commit 'a7edf8fd62c5b0157fa48c90d85cb36c77dd4fa6' into dev
2025-06-24 12:05:00 +10:00
Scott Powell
f93f1872c2
* removed deprecated tbeam variant
2025-06-24 12:03:51 +10:00
ripplebiz
a7edf8fd62
Merge pull request #441 from oltaco/heltecv3-spi_begin_fix
...
fix: remove extra spi.begin() on heltec v3
2025-06-24 11:57:08 +10:00
ripplebiz
9fc60d7a96
Merge pull request #439 from cod3doomy/dev
...
T-Beam refactor
2025-06-24 11:48:19 +10:00
ripplebiz
c61c22d171
Merge pull request #428 from 446564/radio-init-nano-g2
...
update nano g2 to use radio.std_init
2025-06-24 11:38:11 +10:00
taco
f72d5b06ce
fix: remove extra spi.begin() on heltec v3
2025-06-24 11:27:13 +10:00
Scott Powell
e7df8c283f
* room server: new posts now delayed by 6 seconds before syncing to clients
2025-06-23 15:56:19 +10:00
cod3doomy
4dc1a32e40
T-Beam refactor
...
There is a lot to this PR, so if there are any questions let me know.
The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions.
- Merged all T-Beam board.h files into one TBeamBoard.
- Added PMU code to identify different AXP chips.
- Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions
- Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions
- Enabled GPS on all T-Beam versions/models
- Enabled BME280 on the Supreme
I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.
2025-06-22 17:46:30 -07:00
Rob Loranger
f42aea1e37
remove begin()
2025-06-22 09:10:49 -07:00
Scott Powell
117d2d2f22
* new PAYLOAD_TYPE_MULTIPART
...
* experimental double ACK's (at each hop), sent 300ms apart (direct mode only)
2025-06-23 01:14:08 +10:00
Scott Powell
b9408b7f03
* AdvertDataParser: lat/lon can now be zeroes
2025-06-22 21:07:43 +10:00
Scott Powell
2d89195de7
* companion serial protocol ver bump to 6
2025-06-22 21:03:30 +10:00
ripplebiz
908e329a60
Merge pull request #438 from liamcottle/storage/nrf52
...
Add support for storage stats on nRF52/LittleFS
2025-06-22 19:44:14 +10:00
liamcottle
84484853ca
fix indentation
2025-06-22 21:38:35 +12:00
liamcottle
f869862b9a
add support for storage stats on nrf52
2025-06-22 21:35:21 +12:00
Scott Powell
9d3ef66e10
* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)
2025-06-22 16:21:04 +10:00
ripplebiz
587a0fab53
Merge pull request #437 from jquatier/t114-display-flicker
...
Fix T114 display flicker
2025-06-22 15:15:04 +10:00
ripplebiz
eaf7739b36
Merge pull request #436 from 446564/fix-nano-g2-ota-name
...
update nano g2 ultra BLE name for OTA
2025-06-22 15:11:30 +10:00
ripplebiz
e2c103205b
Merge pull request #427 from cod3doomy/dev
...
T-Beam refactor for radio.std_init
2025-06-22 15:07:59 +10:00
JQ
c7c13f990b
increase delay slightly
2025-06-21 18:17:38 -07:00
JQ
b6e3d7f6f3
fix t114 display flicker
2025-06-21 16:13:53 -07:00
cod3doomy
55af02b858
T-Beam removed redundancy
...
Removed redundant SPI begin calls
2025-06-21 14:18:38 -07:00
cod3doomy
a58e394471
Merge branch 'ripplebiz:dev' into dev
2025-06-21 14:12:29 -07:00
Rob Loranger
42248bf405
update nano g2 ultra BLE name for OTA
2025-06-21 11:28:47 -07:00
Rob Loranger
a8c37d0358
remove SPI set pins
2025-06-21 11:22:14 -07:00
Scott Powell
9741009af3
* companion: minor refactor of who should invoke UITask::loop()
2025-06-21 20:48:28 +10:00
ripplebiz
8dd7ee23de
Merge pull request #433 from oltaco/HeltecV3-GPS
...
Heltec v3 GPS support
2025-06-21 20:40:04 +10:00
Scott Powell
62a3e5be21
* added std_init() to CustomSX1268
2025-06-21 15:27:58 +10:00
ripplebiz
398161232b
Merge pull request #432 from oltaco/CustomLLCC68-std_init
...
added CustomLLCC68::std_init()
2025-06-21 13:56:41 +10:00
ripplebiz
ee79a7323e
Merge pull request #431 from mattsains/packet-structure
...
minor changes and fixes to docs
2025-06-21 13:54:53 +10:00
ripplebiz
675815ec65
Merge pull request #430 from oltaco/gps-update-fix
...
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off
2025-06-21 13:49:07 +10:00
ripplebiz
d734ba72ec
Merge pull request #429 from oltaco/rak4631-radioinit-refactor
...
refactor: RAK4631 with CustomSX1262::std_init()
2025-06-21 13:48:22 +10:00
ripplebiz
3d2826abdc
Merge pull request #424 from 446564/fix-GH162
...
fix Heltec v2 getBattMilliVolts ADC multiplier
2025-06-21 13:42:03 +10:00
ripplebiz
06fe60927f
Merge pull request #423 from 446564/fix-GH133
...
heltec v3 update ADC multipler to fix voltage reading
2025-06-21 13:41:04 +10:00
ripplebiz
236a65a4ca
Merge pull request #420 from 446564/feat-GH142
...
return range with advert interval setting error
2025-06-21 13:40:27 +10:00
ripplebiz
640fac7027
Merge pull request #419 from 446564/feat-GH44
...
add time and date feedback to cli commands
2025-06-21 13:36:30 +10:00
ripplebiz
e9adffa3ce
Merge pull request #407 from fdlamotte/seeed_xiao_c6
...
Seeed xiao c6 support
2025-06-21 13:32:15 +10:00
taco
f818ac51c1
feature: GPS support on HeltecV3
...
GPS support via EnvironmentSensorManager. Connect GPS RX to pin 45, TX to pin 46.
Note that while you can disable using the GPS there is no way to power down the GPS without using a mosfet and adjusting PIN_GPS_EN.
2025-06-21 13:04:39 +10:00
Matthew Sainsbury
afa4011bfe
add advert detail
2025-06-20 19:41:07 -07:00
taco
16d8f5483c
added std_init to CustomLLCC68.h
2025-06-21 11:03:25 +10:00
Matthew Sainsbury
c25e02ebc5
minor changes and fixes to docs
2025-06-20 17:59:55 -07:00
taco
1644ebc921
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off.
...
previously the location would always snap to the last heard GPS location after GPS had been on.
2025-06-21 10:09:28 +10:00
taco
268534dde5
refactor: RAK4631 with CustomSX1262::std_init()
2025-06-21 09:52:39 +10:00
Rob Loranger
f328e2bd80
update nano g2 to use radio.std_init
2025-06-20 16:46:16 -07:00
cod3doomy
fccb627bdc
T-Beam refactor for radio.std_init
...
Changed radio init for both T-beam (SX1262) and Supreme (SX1262) to include radio.std_init()
2025-06-20 15:06:01 -07:00
Rob Loranger
0ae74d6d73
fix Heltec v2 getBattMilliVolts
2025-06-20 15:00:46 -07:00
Rob Loranger
6f9e76960a
allows manual BLE pin even when device has display
...
also updates remaining variants to use default of
123456 instead of 0 for random pin
2025-06-20 14:20:42 -07:00
Rob Loranger
c24812bef1
return range with advert interval set error
...
updates both local and flood advert preference
setting errors to include the allowable range and
time units
2025-06-20 09:22:49 -07:00
Rob Loranger
2d164b9e18
add time output to both clock sync and time <epoch> cli
2025-06-20 08:40:06 -07:00
Rob Loranger
7f6dfea42c
update ADC multipler to fix voltage reading
2025-06-20 08:25:19 -07:00
ripplebiz
7e6803ffdc
Merge pull request #418 from fdlamotte/xiao_nrf52-xiao_s3-techo_remove_lora_cr_fallback_from_target
...
remove LORA_CR fallback from target.cpp on xiao_nrf52, xiao_s3 and t-…
2025-06-20 18:37:16 +10:00
Florent de Lamotte
8c8a1702b4
xiao_c6: fallback for LORA_CR is set in std_init
2025-06-20 09:51:35 +02:00
Florent de Lamotte
a1deebb5fc
remove LORA_CR fallback from target.cpp on xiao_nrf52, xiao_s3 and t-echo
2025-06-20 09:47:58 +02:00
Scott Powell
fb5b3b7c6c
* companion: added Datastore methods: getStorageUsedKb(), getStorageTotalKb()
...
* companion: CMD_GET_BATTERY now changed to CMD_GET_BATT_AND_STORAGE
2025-06-20 16:47:59 +10:00
Scott Powell
8c58e18466
* PicoW refactor, now using radio.std_init()
2025-06-20 16:42:49 +10:00
ripplebiz
4ad9255893
Merge pull request #416 from jquatier/analog-button
...
Button handling fix
2025-06-20 14:58:19 +10:00
JQ
65d4c44031
add new quad press
2025-06-19 21:52:57 -07:00
JQ
e9c0f54a20
Merge branch 'dev' into analog-button
2025-06-19 21:50:16 -07:00
ripplebiz
9b2d72ddca
Merge pull request #415 from jquatier/thinknode-std_init
...
Thinknode radio.std_init refactor
2025-06-20 13:48:48 +10:00
ripplebiz
f90dd29cb9
Merge pull request #417 from oltaco/promicro-CustomSX1262
...
refactor: promicro with CustomSX1262::std_init()
2025-06-20 13:47:40 +10:00
Scott Powell
8c00fa1f08
* refactored SensorManager::toggleGps()
2025-06-20 13:44:58 +10:00
ripplebiz
6746a0a057
Merge pull request #404 from fdlamotte/t1000_gps_toggle
...
Gps toggle on 4 clicks
Will merge, but I'll do a refactor of the gpsToggle()
2025-06-20 13:36:56 +10:00
taco
fa33f8fc49
refactor: promicro with CustomSX1262::std_init()
...
added check in CustomSX1262.h to support both txco and non-txco radios
switched promicro to use CustomSX1262::std_init()
2025-06-20 11:22:34 +10:00
JQ
427051eb39
fixing button handling to allow both button types simultaneously
2025-06-19 16:47:31 -07:00
JQ
74c2ac316b
refactoring thinknode to use radio.std_init
2025-06-19 16:27:42 -07:00
Florent de Lamotte
e34d38d2d9
t1000e: gps toggle not using board class
2025-06-19 17:26:58 +02:00
ripplebiz
15039e1208
Merge pull request #406 from fdlamotte/techo_rx1262_refactor
...
Techo rx1262 refactor
2025-06-20 00:27:03 +10:00
ripplebiz
389a039ec3
Merge pull request #405 from fdlamotte/xiao_sx1262_init_refactor
...
Apply refactoring to xiao_nrf52 and xiao_s3
2025-06-20 00:23:50 +10:00
Florent de Lamotte
5c5a3a3384
xiao_c6: apply sx1262 init refactoring
2025-06-19 15:49:30 +02:00
Florent de Lamotte
59c824ab0a
Merge branch 'dev' into seeed_xiao_c6
2025-06-19 15:30:55 +02:00
Florent de Lamotte
f18d23cd15
techo: follow refactoring of CustomSX1262
2025-06-19 15:26:46 +02:00
Florent de Lamotte
f8bbcdb9e9
Apply refactoring to xiao_nrf52 and xiao_s3
2025-06-19 15:18:58 +02:00
Scott Powell
1f0688ee35
* added CustomSX1262::std_init()
...
* refactored variants to use std_init(): heltec_v3, t114, xiao_c3
2025-06-19 10:58:10 +10:00
Florent de Lamotte
568e4332b2
Gps toggle on 4 clicks
2025-06-18 11:52:16 +02:00
Scott Powell
5de8b391fd
* T114 repeater build fix
2025-06-18 17:20:38 +10:00
ripplebiz
f6fe265ae1
Merge pull request #402 from jquatier/t114-variants-display
...
Adding display support to all T114 builds
2025-06-18 16:49:01 +10:00
ripplebiz
b2e52c51d3
Merge pull request #401 from marrold/Seeed_NRF_RTC
...
Add RTC support to Seeed NRF
2025-06-18 16:45:43 +10:00
ripplebiz
88e55d42e4
Merge pull request #397 from fdlamotte/t1000e_gps_off_position_fix
...
t1000e: don't update position if gps is off
2025-06-18 16:40:28 +10:00
Scott Powell
28c0be48eb
* companion: new CMD_GET_ADVERT_PATH -> RESP_CODE_ADVERT_PATH
2025-06-18 16:02:09 +10:00
Scott Powell
11fc3d992b
Merge commit '70158374ca7287db3409ab61855b78413596cd85' into dev
2025-06-18 14:59:19 +10:00
ripplebiz
70158374ca
Merge pull request #396 from jbrazio/jbrazio/2025_5dba32d2
...
Adds support for the Waveshare RP2040-LoRa board
2025-06-18 14:57:45 +10:00
JQ
1af123546b
adding display support to all T114 builds
2025-06-17 16:06:07 -07:00
Matthew Harrold
6d8c85200a
Add support for Seeed NRF + RTC
2025-06-17 23:12:10 +01:00
Scott Powell
042b600c46
* noise floor can now be queried even when int.thresh = 0
2025-06-18 01:27:53 +10:00
ripplebiz
d8a7621b00
Merge pull request #387 from awolden/awolden/T3S3-sx1276
...
Add support T3S3 v1.2 (SX1726)
2025-06-17 12:30:03 +10:00
ripplebiz
512af56522
Merge pull request #384 from recrof/patch-6
...
Add companion roles to Station G2
2025-06-17 12:23:46 +10:00
João Brázio
e5c2857d52
Update VBAT schematic
2025-06-16 21:28:59 +01:00
João Brázio
7465afb0b9
VBAT schematic
2025-06-16 19:51:53 +01:00
João Brázio
aab690a3a3
Update SX126X_CURRENT_LIMIT
2025-06-16 16:57:43 +01:00
Florent de Lamotte
640c75cb8a
t1000e: don't update position if gps is off
2025-06-16 09:14:42 +02:00
Scott Powell
01b246b3ff
* room server: suggested keep_alive interval now disabled
2025-06-16 17:02:44 +10:00
ripplebiz
0bfc04780c
Merge pull request #380 from recrof/dev
...
re-introduce tlora c6 with fixed arduino versions
2025-06-16 16:38:14 +10:00
João Brázio
5ff75e303d
Rename LED pin
2025-06-16 02:01:16 +01:00
João Brázio
5806b39ef6
Set default upload protocol
2025-06-16 02:01:04 +01:00
João Brázio
253fcba9c7
Waveshare RP2040-LoRa board support
2025-06-15 23:48:49 +01:00
ripplebiz
1e76d3c7c7
Merge pull request #391 from LitBomb/patch-13
...
Update faq.md
2025-06-14 12:21:13 +10:00
uncle lit
561b3fd5bf
Update faq.md
...
add full erase instructions using flasher.meshcore.co.uk
add nRF fault tolerant bootloader by discord@che aporeps
2025-06-13 13:36:00 -07:00
Rastislav Vysoky
afafc7e28a
Merge branch 'ripplebiz:dev' into dev
2025-06-13 09:59:06 +02:00
Scott Powell
18fcc93475
* interference threshold now disabled by default
2025-06-13 17:24:47 +10:00
Scott Powell
58426b150a
* fix for when AGC reset is disabled (interval = 0)
2025-06-13 14:25:09 +10:00
Scott Powell
b7be7f7966
* repeater and room server: new CLI setting "agc.reset.interval" (seconds)
2025-06-13 14:15:21 +10:00
ripplebiz
5640d16d82
Merge pull request #378 from recrof/patch-4
...
add mising config for `openocd_target`
2025-06-11 17:40:06 +10:00
Alex Wolden
c6b6e8d043
Added support for t3s3 sx1276
2025-06-10 22:10:24 -07:00
Matthew Sainsbury
407bab67fd
corrections and style
2025-06-10 22:09:23 -07:00
Bence T.
b68651a573
Create packet_structure.md
...
As mentioned by @mofosyne at issue #72
2025-06-10 22:09:23 -07:00
ripplebiz
ab17ab0ddd
Merge pull request #386 from jquatier/thinknode-led
...
ThinkNode M1 TX LED
2025-06-10 18:51:30 +10:00
JQ
b460a97abb
add TX led to thinknode M1
2025-06-09 17:35:00 -07:00
ripplebiz
51edfcab8b
Merge pull request #379 from jquatier/ui-fixes
...
Minor companion ui fixes
2025-06-10 02:22:28 +10:00
Scott Powell
96261364e7
* some HT-CT62 fixes
2025-06-09 17:34:04 +10:00
ripplebiz
5e0cb2cca3
Merge pull request #382 from fdlamotte/ct62_usb_companion
...
ct62: adding companion radios
2025-06-09 14:23:13 +10:00
Rastislav Vysoky
5671ff90e0
Add companion roles to Station G2
2025-06-08 21:01:04 +02:00
Florent
dee57e4860
ct62: adding companion radios
2025-06-08 18:46:11 +02:00
JQ
8fb8e09e12
feedback
2025-06-08 08:25:54 -07:00
recrof
8d10938f29
Merge branch 'dev' of github.com:recrof/MeshCore into dev
2025-06-08 17:02:53 +02:00
recrof
b47abb8677
fix duplicate flag
2025-06-08 17:02:34 +02:00
Rastislav Vysoky
36d482e24c
Merge branch 'ripplebiz:dev' into dev
2025-06-08 14:26:32 +02:00
Scott Powell
935d9a55a3
* HT-CT62 SPI fixes
2025-06-08 20:11:35 +10:00
Scott Powell
f06c809666
* added repeater target for Heltec-CT62
2025-06-08 18:41:29 +10:00
JQ
b910159213
set text width ahead of width calculation
2025-06-07 22:35:59 -07:00
JQ
a3530b4ee2
minor companion ui fixes
2025-06-07 15:57:22 -07:00
Rastislav Vysoky
87df34e35f
add mising config for openocd_target
2025-06-07 10:48:09 +02:00
Rastislav Vysoky
14d4059a06
Merge branch 'ripplebiz:dev' into dev
2025-06-07 09:39:36 +02:00
Scott Powell
fdc338a241
Merge branch 'dev'
2025-06-07 16:15:58 +10:00
Scott Powell
7a03292709
* ver bump to v1.7.0
2025-06-07 16:15:17 +10:00
ripplebiz
222df82924
Merge pull request #367 from 446564/companion-alerts
...
add basic alert system to companion UI
2025-06-07 16:09:09 +10:00
Scott Powell
f7badd2742
Merge branch 'datastore' into dev
2025-06-07 16:04:35 +10:00
ripplebiz
7fbec0e308
Merge pull request #377 from liamcottle/rescue/cli-file-manager
...
Basic File Manager for Rescue CLI
2025-06-07 16:00:49 +10:00
liamcottle
3ddc507732
close roor dir after listing files
2025-06-07 17:56:20 +12:00
liamcottle
16d2ffcf46
simplify serial print
2025-06-07 17:42:18 +12:00
liamcottle
433d3b7942
ensure root path is usable
2025-06-07 17:38:22 +12:00
Scott Powell
3e80c41d16
* enabling _PRIVATE_KEY import/export for ALL companions.
2025-06-07 14:20:59 +10:00
liamcottle
78012ae9ab
don't create file when trying to open for read
2025-06-07 16:17:45 +12:00
liamcottle
fcf68d3a16
ensure user isn't removing invalid path
2025-06-07 16:03:04 +12:00
liamcottle
497c61f507
add rm command to remove file
2025-06-07 15:44:36 +12:00
liamcottle
dc26989499
implement ls and cat commands for rescue mode
2025-06-07 15:23:55 +12:00
Rob Loranger
173aea2bbc
add basic alert system to companion UI
...
Adds `_alert[80]` which can be set along with `_needs_refresh`
to trigger a simple on screen alert that lasts 1s at this time.
Implements POC with double press to advert action
2025-06-06 09:11:47 -07:00
Scott Powell
8f34021826
* DataStore, advert blob record format change
2025-06-06 21:35:54 +10:00
Rastislav Vysoky
477588caaa
Merge branch 'ripplebiz:dev' into dev
2025-06-06 12:35:00 +02:00
ripplebiz
5abcf42a35
Merge pull request #376 from liamcottle/fix/buzzer-power-draw
...
Fix Buzzer Power Draw
2025-06-06 20:11:26 +10:00
liamcottle
cb6d75c5ef
fix 150mA power draw on ThinkNode M1
2025-06-06 21:55:03 +12:00
Scott Powell
a0ff3f0a0b
* new nRF52 impl for advert blobs
2025-06-06 19:50:51 +10:00
Scott Powell
6c75d64133
* companion: refactor of all filesystem access to new DataStore module
2025-06-06 15:30:35 +10:00
ripplebiz
a249e774d9
Merge pull request #375 from mattsains/packet-structure
...
Create packet_structure.md
2025-06-06 13:39:07 +10:00
Matthew Sainsbury
ffdb77ba88
corrections and style
2025-06-05 20:16:18 -07:00
Scott Powell
b5ed06fd47
Merge branch 'main' into dev
2025-06-06 12:39:01 +10:00
ripplebiz
45b1f9b446
Merge pull request #374 from recrof/patch-3
...
Disable LFS_ASSERT to stop freezing the nrf52 boards on LFS errors
2025-06-06 12:38:11 +10:00
Rastislav Vysoky
10a92fe8ef
Disable LFS_ASSERT to stop freezing the boards on LFS errors
2025-06-06 00:23:57 +02:00
recrof
a10ef1ef84
nrf52 fix: don't allow LFS_ASSERT to freeze the board
2025-06-06 00:07:03 +02:00
Scott Powell
6fbdcf9439
Merge branch 'main' into dev
2025-06-05 19:15:30 +10:00
ripplebiz
1053856b06
Merge pull request #372 from liamcottle/design/logo
...
add logo files
2025-06-05 19:14:33 +10:00
Rastislav Vysoky
121c75a3bd
Merge branch 'ripplebiz:dev' into dev
2025-06-05 11:05:47 +02:00
liamcottle
1a1e714caa
add logo files
2025-06-05 20:35:40 +12:00
Scott Powell
d2a0e22592
* noise floor lower bound now clamped to -120
2025-06-05 14:04:33 +10:00
Rastislav Vysoky
a01879b7c7
Merge branch 'ripplebiz:dev' into dev
2025-06-04 13:39:39 +02:00
Scott Powell
de5dd8b443
* Companion: long-press in first 8 seconds now enters CLI Rescue mode
2025-06-04 21:33:48 +10:00
Scott Powell
244dfa38c3
* SERVER_RESPONSE_DELAY now applied to: login responses, companion telemetry responses
2025-06-04 18:10:47 +10:00
Scott Powell
ed0ceaa4af
* Mesh: reciprocal path send now with slightly less priority and 500ms delay
2025-06-03 20:28:05 +10:00
Scott Powell
609315cded
* Companion now can be configured with TXT_ACK_DELAY (default is 200ms)
2025-06-03 20:27:09 +10:00
Scott Powell
af188d2bbd
* ESP32-C3 targets, now 80Mhz cpu
2025-06-03 19:01:45 +10:00
Scott Powell
7bd2258d9e
* repeater & room server: new SERVER_RESPONSE_DELAY and TXT_ACK_DELAY defines.
2025-06-03 19:01:03 +10:00
ripplebiz
38b5d0552d
Merge pull request #360 from fdlamotte/t1000e_sensors
...
t1000e: light and temp sensor support
2025-06-03 14:09:53 +10:00
ripplebiz
9eca52c49e
Merge pull request #361 from fdlamotte/wio_sx1262_rxen
...
sx1262_wio: hook rxen, specify txen as not connected
2025-06-03 14:06:53 +10:00
ripplebiz
2eb6a60d34
Merge pull request #362 from jquatier/station-g2-display
...
Add display to station G2 firmwares
2025-06-03 14:00:53 +10:00
Florent
aebc832c69
sx1262_wio: hook rxen, specify txen as not connected
2025-06-02 23:23:08 +02:00
JQ
fe905ccefe
add display to station G2 firmwares
2025-06-02 14:10:10 -07:00
Florent
09db0bc35b
t1000e: light and temp sensor support
2025-06-02 19:33:48 +02:00
recrof
6c2a2aff4c
re-introduce tlora c6 with fixed arduino versions
2025-06-02 17:36:45 +02:00
Scott Powell
2c980accf4
* Room server fix: re-tries for pushPostToClient() used to have same packet hash
2025-06-02 22:19:46 +10:00
Scott Powell
05041c762b
* self telemetry response simpler now
2025-06-02 20:44:05 +10:00
Scott Powell
c864822002
* companion: 'self telemetry' request with CMD_SEND_TELEMETRY_REQ (with no pubkey param)
2025-06-02 20:28:00 +10:00
Scott Powell
b2d4a331d7
* removing ESP32C6 stuff. (causing cache corruptions)
2025-06-02 15:27:33 +10:00
Scott Powell
c9a46799b9
* companion: some further refactors after the MyMesh refactor
2025-06-02 15:25:55 +10:00
ripplebiz
f180764680
Merge pull request #353 from hank/mymesh-refactor2
...
MyMesh Refactor and Advert Button
2025-06-02 14:55:33 +10:00
hank
72b7f19a3f
Reverting UITask.h changes
2025-06-01 20:45:18 -07:00
hank
088f2d6f5b
Re-merging f41b48c
2025-06-01 20:42:40 -07:00
hank
97b4bb41f0
Reverting format changes to NodePrefs
...
But changing to pragma once.
2025-06-01 20:41:04 -07:00
hank
9556826904
Merge branch 'mymesh-refactor2' of https://github.com/hank/MeshCore into mymesh-refactor2
2025-06-01 20:31:50 -07:00
hank
ab66859f92
Re-applying 105cb85, formatting, MyMesh reformat
2025-06-01 20:31:29 -07:00
hank
f625879de3
Re-applying 105cb85, formatting, MyMesh reformat
2025-06-01 20:28:29 -07:00
hank
ca7cdffcf5
Reverting changes to simple_secure_chat main
2025-06-01 20:16:29 -07:00
hank
5a7aa2e7c2
Reverting changes to Button code
2025-06-01 20:15:16 -07:00
hank
89af1bbbee
Merge branch 'dev' of https://github.com/ripplebiz/MeshCore into mymesh-refactor2
...
Applying c495271
2025-06-01 20:07:41 -07:00
hank
ec628b74e2
Merge branch 'mymesh-refactor2' of https://github.com/hank/MeshCore into mymesh-refactor2
2025-06-01 20:03:06 -07:00
hank
d583c4028c
Re-applying ecd2b0b
2025-06-01 20:02:35 -07:00
Scott Powell
b867a9c14b
* MicroNMEALocationProvider: clock param now NULL by default
2025-06-01 20:02:35 -07:00
Florent
96de6bd33f
t1000: remove sync custom var
2025-06-01 20:02:35 -07:00
Florent
d6bd396ade
micronmea: was using global rtc_clock to sync instead of _clock
2025-06-01 20:02:35 -07:00
Florent
1b86b4c0a2
gps : sync time on fix
2025-06-01 20:02:35 -07:00
Florent
f41b48c6b8
wioe5: integrate sensor in sensor mgr
2025-06-01 20:02:35 -07:00
Florent
105cb85ba9
wio_e5 : bme280 support
2025-06-01 20:02:34 -07:00
hank
1e10574a1f
Reformatting code
2025-06-01 20:02:31 -07:00
Scott Powell
c495271d6d
* companion: disabling interference threshold for now
2025-06-02 12:54:40 +10:00
ripplebiz
acb4ca8ad4
Update README.md
2025-06-02 11:18:37 +10:00
hank
f4310ec99f
Merge branch 'dev' of https://github.com/ripplebiz/MeshCore into mymesh-refactor2
2025-06-01 09:34:09 -07:00
hank
bbd04d7ac8
Reformatting code
2025-06-01 09:25:17 -07:00
hank
92767d4761
Removing debug mode
2025-06-01 09:24:32 -07:00
hank
ad1a90074f
Adding clang-format
2025-06-01 09:24:10 -07:00
Florent
b67f9f0ae5
initial support for xiao_c6
2025-06-01 17:13:07 +02:00
Scott Powell
a783b9a2b7
* MicroNMEALocationProvider: clock param now NULL by default
2025-06-01 23:55:57 +10:00
ripplebiz
bf42064bc0
Merge pull request #348 from fdlamotte/gps_time_sync
...
gps : sync time on fix
2025-06-01 23:51:44 +10:00
Florent
1814599ba7
t1000: remove sync custom var
2025-06-01 15:32:02 +02:00
Florent
52bc294687
micronmea: was using global rtc_clock to sync instead of _clock
2025-06-01 14:12:22 +02:00
ripplebiz
9aa3a4403e
Merge pull request #356 from jquatier/channel-name-fix
...
Fix for channel name display
2025-06-01 18:48:29 +10:00
ripplebiz
eb009d165b
Merge pull request #351 from fdlamotte/stm32_sensors
...
wio_e5 : bme280 support
2025-06-01 16:38:25 +10:00
Florent
c7a212b422
wioe5: integrate sensor in sensor mgr
2025-06-01 08:30:53 +02:00
ripplebiz
8159ac6466
Merge pull request #357 from LitBomb/patch-12
...
faq.md: update OTA firmware instructions
2025-06-01 15:19:11 +10:00
uncle lit
f935e4aab7
faq.md: update OTA firmware instructions
...
added ESP32 OTA firmware update instructions
added nRF OTA firmware update instructions to use the new nRF DFU app on android and iOS
2025-05-31 21:59:14 -07:00
JQ
6aae047a80
fixing channel name display
2025-05-31 20:55:53 -07:00
hank
81a39f04d9
Refactored MyMesh, advert on doublepress
...
Pulled the class out of main.cpp, made a header to go along with it, externed globals in headers to make them accessible to button code. Added button code to send an advert on double press. Refactored ini files to prevent linker errors.
2025-05-31 19:11:28 -07:00
ripplebiz
4f7ddefe48
Merge pull request #352 from jquatier/GxEPDDisplay-fonts
...
GxEPDDisplay larger font (T-echo & Thinknode M1)
2025-06-01 10:51:16 +10:00
JQ
24e0b198bd
better fonts for GxEPDDisplay
2025-05-31 15:22:59 -07:00
Florent
4a104e034b
wio_e5 : bme280 support
2025-05-31 20:29:03 +02:00
ripplebiz
a9f049ac92
Merge pull request #350 from fdlamotte/wio-e5-adc
...
wio-e5 : make distinct targets for dev board and mini dev board
2025-06-01 00:42:11 +10:00
Florent
d1bc20291b
wio-e5 : make distinct targets for dev board and mini dev board
2025-05-31 15:52:59 +02:00
ripplebiz
ee51cc3dcb
Merge pull request #343 from jquatier/button-management
...
Improved Button Management
2025-05-31 20:55:27 +10:00
Florent
40600e3f4a
gps : sync time on fix
2025-05-31 10:57:22 +02:00
ripplebiz
5bbb48b3ee
Merge pull request #346 from recrof/dev
...
added basic support for LilyGo Tlora C6
2025-05-31 18:21:43 +10:00
Rastislav Vysoky
dcbc020134
fixed old def
2025-05-31 08:06:53 +02:00
JQ
cda65dfd0e
update sound
2025-05-30 22:58:30 -07:00
JQ
0be8d64ace
add ack for quiet mode
2025-05-30 22:55:53 -07:00
JQ
36dc48a251
removing pinmode
2025-05-30 22:26:29 -07:00
JQ
8ce0fd0f52
simplify logic
2025-05-30 22:14:37 -07:00
JQ
c522482edd
usability fixes, fix t114 build src filter
2025-05-30 20:32:49 -07:00
JQ
c0e136e0cb
Merge branch 'dev' into button-management
2025-05-30 19:19:08 -07:00
recrof
54536b45d9
added basic support for LilyGo Tlora C6
2025-05-30 14:31:44 +02:00
ripplebiz
c18f3a3eb3
Merge pull request #344 from jquatier/techo-gps
...
Add T-Echo GPS
2025-05-30 13:04:31 +10:00
JQ
a1c04b8d90
fix pins
2025-05-28 23:21:28 -07:00
JQ
2d4cc7434a
add gps for techo
2025-05-28 22:21:51 -07:00
ripplebiz
9bd67912ee
Merge pull request #342 from jquatier/thinknode-m1-gps
...
ThinkNode m1 GPS support
2025-05-29 12:49:44 +10:00
JQ
f63cb72108
cleanup
2025-05-28 16:45:41 -07:00
JQ
7975d07cc9
Merge remote-tracking branch 'jquatier/dev' into button-management
2025-05-28 15:57:17 -07:00
Scott Powell
7f2c9f03d0
* RAK4632 targets, now requiring ENV_INCLUDE_GPS to enable GPS
2025-05-28 23:31:31 +10:00
ripplebiz
ea7d02069f
Merge pull request #332 from cod3doomy/dev
...
RAK4631: Add GPS support
2025-05-28 23:11:44 +10:00
ripplebiz
0ad543d1ae
Merge pull request #341 from jquatier/m1-display-and-buzzer
...
Enable buzzer for Thinknode M1, add scaling to bitmaps for GxEPDDisplay
2025-05-28 17:52:33 +10:00
JQ
d54d0873c7
handle gps switch
2025-05-27 23:24:08 -07:00
JQ
124ce0e2ae
add GPS support to thinknode M1
2025-05-27 21:38:48 -07:00
JQ
3dab3db57c
add scaling to bitmaps for EPD display, and enable buzzer for Thinknode M1
2025-05-27 19:20:35 -07:00
cod3doomy
622e71a819
Merge branch 'ripplebiz:dev' into dev
2025-05-27 19:14:20 -07:00
JQ
07204aedee
initial button manager
2025-05-27 19:10:56 -07:00
Scott Powell
28cc5e1b51
* TBeam: fix for debug output
2025-05-27 23:37:59 +10:00
ripplebiz
3f20ca5301
Merge pull request #337 from hank/dev
...
TBeam 1.1 PMU fixes
2025-05-27 23:32:09 +10:00
Scott Powell
ddbf0cf5aa
* companion: interference threshold default (14)
2025-05-27 22:48:28 +10:00
Scott Powell
4e446d70f0
* Room server: stats refactor -> noise_floor
2025-05-27 22:38:01 +10:00
Scott Powell
f8f42f0b32
Merge branch 'scan_exp' into dev
2025-05-27 21:51:18 +10:00
ripplebiz
97e9679054
Merge pull request #335 from seagull9000/RTTTL-tone-for-shutdown
...
Connect RTTTL shutdown melody to shutdown procedure
2025-05-27 20:34:07 +10:00
Scott Powell
3339e77cb6
Merge branch 'dev' into scan_exp
2025-05-27 18:58:48 +10:00
Scott Powell
b74fff745f
* companion: saveContacts() now deferred for 5 secs (lazy writes)
2025-05-27 18:45:06 +10:00
ripplebiz
855b214149
Merge pull request #338 from mattsains/payloads
...
initial try at documenting payload formats
2025-05-27 17:57:03 +10:00
seagull9000
f792ad6dbf
Merge branch 'dev' into RTTTL-tone-for-shutdown
2025-05-27 14:21:14 +12:00
Matthew Sainsbury
23dac19dfd
initial try at documenting payload formats
2025-05-26 18:22:31 -07:00
hank
82a508deb5
Fixing compilation issue, missing tbeam func
2025-05-26 17:41:55 -07:00
hank
7941930108
Merge branch 'main' of https://github.com/hank/MeshCore into dev
2025-05-26 17:21:17 -07:00
hank
5fc319879d
Merge branch 'dev' of https://github.com/ripplebiz/MeshCore into dev
2025-05-26 17:18:57 -07:00
hank
e9dd84d605
Merge branch 'main' into main
2025-05-26 17:11:23 -07:00
seagull9000
0e6e6f96bc
Connect RTTTL shutdown melody to shutdown procedure
...
Added a new UITask shutdown method to run non-board specific shutdown code. This avoids having to update all the board files for different hardware.
UITask::shutdown(bool restart = false);
Where the buzzer is available and defined, the RTTTL shutdown melody is played when the button is held down for >5s.
2025-05-27 11:07:51 +12:00
Scott Powell
6f5b29db60
* stats: curr_free_queue_len now repurposed to noise_floor
2025-05-27 00:28:23 +10:00
Scott Powell
1b9352d967
* companion: PUSH_CODE_LOGIN_SUCCESS frame, now includes server clock timestamp
2025-05-26 19:52:32 +10:00
Scott Powell
c3fd16d5fa
* interference threshold now stored in prefs, CLI: set/get "int.thresh"
2025-05-26 17:18:49 +10:00
Scott Powell
f51a3a7b9a
Merge branch 'dev' into scan_exp
2025-05-26 16:44:27 +10:00
cod3doomy
ba8ea289c2
Merge branch 'dev' of https://github.com/cod3doomy/MeshCore_HW_Dev into dev
2025-05-25 22:57:36 -07:00
cod3doomy
7c8a1d3fac
RAK4631: Add RAK12500 GPS support
...
Added RAK12500 GPS support
Added socket scan capability to determine which socket the GPS is connected to
T-beam supreme: added conditional to displaying location data to only when gps is active
2025-05-25 22:48:04 -07:00
Scott Powell
5499b8bc9d
* minor tidy ups
2025-05-26 14:39:44 +10:00
ripplebiz
c460dd8407
Merge pull request #308 from cod3doomy/dev
...
t-beam supreme: display fix, BME add, user btn fix
2025-05-26 14:34:09 +10:00
cod3doomy
3b39d9bb43
t-beam supreme: fixes and consolidation
...
Made changes requested by Scott
Simplified gps init sequence and removed unnecessary code
Reverted SensorManager change
Updated PMU flow to enable header outputs
2025-05-25 21:23:31 -07:00
cod3doomy
7cb0b8e233
Merge branch 'ripplebiz:dev' into dev
2025-05-25 21:11:07 -07:00
ripplebiz
ddf0e46965
Merge pull request #326 from memo-567/heltec_v3_sensors
...
Adding sensor classes support to Heltec v3
2025-05-26 12:34:12 +10:00
Scott Powell
3455696308
* RAK: "start ota" now replies with Bluetooth MAC address
2025-05-26 12:23:52 +10:00
cod3doomy
9158d9311a
Merge branch 'ripplebiz:dev' into dev
2025-05-25 10:05:56 -07:00
Scott Powell
adc2d6fbbf
* dynamic noise floor sampling
2025-05-25 21:44:15 +10:00
Scott Powell
4c95201e60
* added Radio::loop() virtual function
...
* RadioLibWrapper: new isChannelActive() based on current RSSI being above noise_floor + THRESHOLD
2025-05-24 21:24:44 +10:00
Memo
13c79b247b
Merge branch 'ripplebiz:main' into heltec_v3_sensors
2025-05-24 10:42:22 +00:00
Scott Powell
ef6492a035
* refactor of RadioLibWrapper::isReceiving()
2025-05-24 20:42:00 +10:00
Memo
837a791902
Update platformio.ini
2025-05-24 10:39:05 +00:00
Scott Powell
d4eb9df491
Merge branch 'dev'
2025-05-24 17:40:52 +10:00
Scott Powell
f8eb6afdb0
* ver bump to 1.6.2
2025-05-24 16:19:19 +10:00
ripplebiz
f7780bb4df
Merge pull request #330 from recrof/dev
...
heltec wireless tracker: added repeater and room server roles
2025-05-24 15:11:39 +10:00
recrof
324a2ce95f
added repeater and room server roles to heltec wireless tracker
2025-05-24 07:05:33 +02:00
ripplebiz
1679781963
Merge pull request #329 from ngavars/xiao-nrf-sensors
...
Add sensor support to Xiao Nrf
2025-05-24 14:23:43 +10:00
ripplebiz
3a2c5e6e53
Merge pull request #327 from seagull9000/RTTTL-tone-for-Channel-Message
...
RTTTL-tone-for-Channel-Message
2025-05-24 14:16:30 +10:00
Normunds Gavars
b0605443b6
Add sensor support to Xiao Nrf
2025-05-23 21:24:02 +03:00
Scott Powell
985d46f9bc
* EnvironmentSensorManager: some tidy ups
2025-05-23 19:12:32 +10:00
ripplebiz
eb7e0afb9d
Merge pull request #321 from oltaco/sensor-class-with-gps
...
GPS support added to EnvironmentSensorClass
2025-05-23 19:05:02 +10:00
taco
31b29e84f7
refactor: more conditionals for GPS
...
also re-added some missing returns.
2025-05-23 18:58:45 +10:00
seagull9000
5905f99fe7
Merge branch 'RTTTL-tone-for-Channel-Message' of https://github.com/seagull9000/MeshCore into RTTTL-tone-for-Channel-Message
2025-05-23 20:44:42 +12:00
seagull9000
cbe51d366d
Merge branch 'RTTTL-tone-for-Channel-Message' of https://github.com/seagull9000/MeshCore into RTTTL-tone-for-Channel-Message
2025-05-23 20:44:00 +12:00
seagull9000
0f958078e5
Merge branch 'RTTTL-tone-for-Channel-Message' of https://github.com/seagull9000/MeshCore into RTTTL-tone-for-Channel-Message
2025-05-23 20:42:44 +12:00
seagull9000
f226a48886
RTTTL-tone-for-Channel-Message
...
I was a bit remiss in removing the tone for channel message event - this puts one in.
So: DM event - plays a tone (per current)
Channel Message - new shorter tone
All others aren't defined at present. Need muting function before we get too carried away.
2025-05-23 20:32:52 +12:00
taco
18ccee7f17
REFACTOR: sensors are now wrapped in conditionals
2025-05-23 17:08:23 +10:00
seagull9000
ce6fbe7013
RTTTL-tone-for-Channel-Message
...
I was a bit remiss in removing the tone for channel message event - this puts one in.
So: DM event - plays a tone (per current)
Channel Message - new shorter tone
All others aren't defined at present. Need muting function before we get too carried away.
2025-05-23 17:58:13 +12:00
taco
788dc65a56
fix: remove stray initSerialGPS call
2025-05-23 14:34:34 +10:00
Memo
2a9ef15044
Merge branch 'ripplebiz:main' into heltec_v3_sensors
2025-05-23 04:26:48 +00:00
ripplebiz
ee20d84ee2
Merge pull request #322 from fdlamotte/rak3x72
...
rak3x72 : first commit
2025-05-23 13:45:31 +10:00
ripplebiz
bb5dcce504
Merge pull request #289 from adam2872/RAK4631-user-button
...
Implement user button on RAK4631 using analogue pin 31 (same as MT)
2025-05-23 13:19:32 +10:00
cod3doomy
6a28cbe06d
t-beam supreme: minor GPS and BME fixes
...
Fixed GPS initial state to default to off after init.
Removed redundant current limit define
2025-05-22 16:50:06 -07:00
cod3doomy
175473a389
Merge branch 'ripplebiz:dev' into dev
2025-05-22 09:23:14 -07:00
Memo
a851ea27c8
Update platformio.ini
2025-05-22 15:50:54 +00:00
Florent de Lamotte
5b85f5950f
rak3x72 : report bat voltage
2025-05-22 16:24:20 +02:00
Memo
4c2f05da63
Update platformio.ini
2025-05-22 13:24:26 +00:00
Florent
9a4acf47d0
rak3x72 : first commit
2025-05-22 14:47:44 +02:00
Memo
fd68b8fef2
Update target.h
2025-05-22 12:07:45 +00:00
Memo
e48bd15d48
Update target.cpp
2025-05-22 12:07:06 +00:00
Memo
5c838c451c
Update platformio.ini
2025-05-22 12:06:34 +00:00
ripplebiz
a3b874a5aa
Merge pull request #305 from ngavars/dev
...
Telemetry: Create sensor classes that can be shared across variants
2025-05-22 15:46:28 +10:00
taco
68c2f1c864
added serial GPS support to EnvironmentSensorClass
...
based on T114 serial GPS and EnvironmentSensorClass.
2025-05-22 15:36:20 +10:00
Scott Powell
ccc5ec1aa9
* Companion: telemetry_mode_env added to prefs
2025-05-22 15:26:30 +10:00
Normunds Gavars
920e0dc10c
Remove NUM_SENSOR_SETTINGS
2025-05-22 00:38:51 +03:00
Normunds Gavars
d804e46dd3
Add sensors to build path for ProMicroLLCC68
2025-05-22 00:35:03 +03:00
Normunds Gavars
8391c7fa0d
Remove INA219 wrapper
2025-05-22 00:28:20 +03:00
Normunds Gavars
e248aa88f2
Remove unused defines
2025-05-22 00:22:43 +03:00
Normunds Gavars
66ef5c38ae
Remove sensor wrapper classes and simplify. Switch to Adafruit libs for sensors.
2025-05-22 00:19:00 +03:00
ripplebiz
6894ca08e7
Merge pull request #317 from webmonkey/webmonkey-faq-proofread
...
Proof-reading fixes to the FAQ
2025-05-21 13:54:00 +10:00
webmonkey
39119f5560
Small fixes
2025-05-20 21:42:36 +01:00
cod3doomy
ec3d4f03c8
t-beam supreme: fixes and cleanup
...
Reverted the SensorManager changes
Moved BME into TbeamSupSensorManager
Moved printBMEValues into TbeamSupSensorManager
Moved scanDevices out of TBeamS3SupremeBoard
2025-05-20 11:37:41 -07:00
webmonkey
45bc8b0861
Proof-reading fixes to the FAQ
...
Fixed spelling and grammar issues. Also changed the number of stored Room server messages from 16 to 32
2025-05-20 19:24:20 +01:00
Adam Mealings
36fd724d7c
added missing variable defs and pinmode
2025-05-20 15:16:56 +01:00
adam2872
66ed237c0c
Merge branch 'Dev' into RAK4631-user-button
2025-05-20 14:25:01 +01:00
adam2872
259b2b0150
Merge branch 'ripplebiz:main' into main
2025-05-20 14:00:24 +01:00
Adam Mealings
6cc79b0ec8
Updated to use #if defined... instead of #ifdef
2025-05-20 13:54:31 +01:00
ripplebiz
5019a79e7f
Merge pull request #316 from recrof/dev
...
lilygo tbeam sx1276, tbeam supreme: added SX12XX_CURRENT_LIMIT
2025-05-20 22:24:08 +10:00
recrof
a91976d33e
fix: missing SX126X_CURRENT_LIMIT
2025-05-20 14:20:42 +02:00
recrof
42aaf7bd17
lilygo tbeam sx1276: forgot to add SX127X_CURRENT_LIMIT=120
2025-05-20 14:05:11 +02:00
ripplebiz
ba72a7cae1
Merge pull request #315 from liamcottle/feature/companion-advert-name
...
Set default companion node name via build flags
2025-05-20 19:46:22 +10:00
liamcottle
4f35c84c7c
allow setting default node name for companion via build flag
2025-05-20 20:51:46 +12:00
ripplebiz
51e4a89677
Merge pull request #314 from seagull9000/RTTTL-tweaks1
...
RTTTL on message types
2025-05-20 17:44:19 +10:00
seagull9000
2042033bf6
fix location and naming of enum
2025-05-20 19:33:21 +12:00
seagull9000
a719466871
RTTTL on message types
2025-05-20 19:09:49 +12:00
Scott Powell
9ea6f91c09
* workaround for nRF + LittleFS glitch with seek/truncate
2025-05-20 16:29:09 +10:00
ripplebiz
9df9b1cc7d
Merge pull request #313 from 446564/ext-notify-nano-g2
...
enable external notify for nano g2 ultra
2025-05-20 16:13:35 +10:00
Rob Loranger
1adac52f52
enable external notify for nano g2 ultra
...
uses new non blocking rtttl
2025-05-19 19:28:44 -07:00
Scott Powell
30a6b12196
* refactored buzzer concept to UITask
...
* moved buzzer.h/cpp to helpers/ui
2025-05-20 11:52:55 +10:00
ripplebiz
857d205eb8
Merge pull request #312 from seagull9000/RTTTL-generic-buzzer
...
initial support for generic RTTTL (Ring Tone Transfer Language) notifier
2025-05-20 11:34:53 +10:00
seagull9000
ebf57ecf3c
initial support for generic RTTTL notifier
2025-05-20 13:26:40 +12:00
ripplebiz
759ff6e947
Merge pull request #310 from 446564/nano-g2-gps
...
add GPS for nano g2
2025-05-20 11:02:22 +10:00
ripplebiz
b83bc997b5
Merge pull request #306 from AndreaCCIE/T114-GPS-fix
...
Increase the delay to 1500 to allow enough time for T114 GPS to start up successfully.
2025-05-20 10:52:57 +10:00
Rob Loranger
26ec8437cc
add GPS for nano g2
...
hardcoded interval of 1 minute after first fix obtained
2025-05-19 15:19:54 -07:00
cod3doomy
d4ff1e8c99
t-beam supreme: current limit increase
...
Added the current limit increase define
2025-05-19 13:15:01 -07:00
cod3doomy
5bae6c7481
t-beam supreme: display fix, BME add, user btn fix
...
-Fixed build issues after display refactor
-Added BME280 support and updated SensorManager to include this data
-Fixed user button and verified it turns the display on
2025-05-19 12:55:56 -07:00
Normunds Gavars
ba4dbfbe66
Remove unnecessary include
2025-05-19 20:30:58 +03:00
Normunds Gavars
d55b2527be
Telemetry: Create BME280 sensor that can bu used across variants. Add to promicro.
2025-05-19 19:37:30 +03:00
AndreaB
aab47c6a8f
Increase the delay to 1500 to allow enough time for T114 GPS to start up successfully.
2025-05-19 16:52:24 +01:00
Normunds Gavars
a7c7de4ffa
Create sensor classes that can be shared across variants
2025-05-19 17:24:54 +03:00
Scott Powell
28c5086082
* bug fix for CommonCLI, when entering long unknown command
2025-05-19 23:39:34 +10:00
Scott Powell
5aa2ed8035
* AdvertDataHelpers: reverting parsing logic, but changed meanings of 'battery' and 'temperature' to just two generic uint16 'feature' properties
2025-05-19 23:21:57 +10:00
Scott Powell
f0c5f828d9
* AdvertDataHelpers: prospective changes to first byte bit-field
2025-05-19 22:40:53 +10:00
ripplebiz
3ea9c498b8
Merge pull request #290 from adam2872/Modern-battery-icon
...
Slightly better battery icon
2025-05-19 14:30:16 +10:00
Scott Powell
19d506f4b3
* big refactor of the 'display' object. Now defined in variants/*/target modules.
2025-05-19 14:16:55 +10:00
ripplebiz
30439321e9
Merge pull request #298 from 446564/add-nano-g2-ultra
...
Initial support for nano g2 ultra
2025-05-19 11:09:02 +10:00
ripplebiz
49d727ee9b
Merge pull request #300 from cod3doomy/dev
...
t-beam supreme: PMU and i2c fixes
2025-05-19 10:56:42 +10:00
ripplebiz
18052a67bf
Merge pull request #301 from memo-567/Removes-green-LED-continuous-light
...
Removes T114 green LED continuous light
2025-05-19 10:53:23 +10:00
ripplebiz
0f0d005767
Merge pull request #304 from jquatier/altitude-telemetry
...
Add altitude to GPS telemetry
2025-05-19 10:50:31 +10:00
JQ
b25060fc8e
fix altitude for telemetry, instead of using zero
2025-05-18 16:36:45 -07:00
cod3doomy
23fe4f9c74
t-beam supreme: debug move
...
Moved scanDevices into ifdef MESH_DEBUG since it only needs to run under debug sequence
2025-05-18 10:20:32 -07:00
Scott Powell
b816e3c75d
* possible bug when forwarding direct mode packets
2025-05-18 21:22:27 +10:00
Memo
96061225ad
Update variant.h
2025-05-18 06:14:08 +00:00
cod3doomy
66abb91981
t-beam supreme: PMU and i2c fixes
...
Fixed i2c (Wire) init issue by defining pins in platformio
Added an i2c scanning function for debug
Corrected the pmu power up sequence
2025-05-17 22:01:13 -07:00
Rob Loranger
adb322a1eb
Initial support for nano g2 ultra
...
not yet implemented are GPS and external notification LED and buzzer
2025-05-17 14:18:37 -07:00
Scott Powell
3b6d4b4726
Merge branch 'main' into dev
2025-05-18 01:31:27 +10:00
ripplebiz
56fc5d3264
Merge pull request #297 from liamcottle/docs/readme-update
...
A few adjustments to the readme
2025-05-18 01:29:33 +10:00
liamcottle
3401df8563
fix formatting
2025-05-18 02:54:53 +12:00
liamcottle
ca8965eff4
update get support
2025-05-18 02:53:05 +12:00
liamcottle
2df3df77bd
update how to get started
2025-05-18 02:47:09 +12:00
liamcottle
329649b33d
adjust getting started info
2025-05-18 02:26:53 +12:00
liamcottle
576d53b7ff
add info about flasher and clients
2025-05-18 02:18:32 +12:00
ripplebiz
2fbb1b41bb
Merge pull request #294 from 446564/SH1106-display
...
Sh1106 display
2025-05-17 23:32:14 +10:00
ripplebiz
8769c3873c
Merge pull request #293 from ngavars/dev
...
Telemetry: add support of AHT10/AHT20 temp/humidity sensor to Promicro
2025-05-17 22:35:03 +10:00
ripplebiz
80a8255d3b
Merge pull request #295 from LitBomb/patch-10
...
Update faq.md to undo a merge from the dev branch that should not have included the faq.md file, update to note both SF 10 and SF 11 are viable
2025-05-17 21:54:43 +10:00
Scott Powell
ed205e403b
* ver bump to v1.6.1
2025-05-17 20:04:55 +10:00
Scott Powell
5de2f0edad
* BLE_WRITE_MIN_INTERVAL upped to 60 millis
2025-05-17 19:54:31 +10:00
uncle lit
a688fdd095
Update faq.md
...
revert a bad merge https://github.com/ripplebiz/MeshCore/commit/1451f8753671c06007a91678d378a290084ec3e1 in main that wiped out the last changes to faq.md
Update to note both SF 10 and SF 11 can be used based on local use case needs. There are presets in Liam's smartphone apps for both SF 10 and SF 11.
2025-05-16 17:09:17 -07:00
Rob Loranger
80101684d5
add support for SH1106 OLED display
2025-05-16 08:45:55 -07:00
Normunds Gavars
ec755a539b
Telemetry: add support of AHT10/AHT20 temp/humidity sensor to Promicro
2025-05-16 15:03:42 +03:00
Scott Powell
61d000e3a6
* companion: fix for importContact(). Now removes the packet-hash from table, before 'replaying'
2025-05-16 19:57:09 +10:00
Scott Powell
1eff287609
* repeater: MAX_CLIENTS now defaults to 32
2025-05-15 20:36:09 +10:00
ripplebiz
c23811e237
Merge pull request #287 from ngavars/dev
...
Promicro: add INA219 current sensor support
2025-05-15 14:37:37 +10:00
ripplebiz
7b38dca5fa
Merge pull request #292 from cod3doomy/dev
...
t-beam supreme: enabled lora tx led
2025-05-15 14:32:32 +10:00
cod3doomy
ddf5f5c013
t-beam supreme: enabled lora tx led
...
enabled lora tx led and verified it flashes with message transmit
2025-05-14 20:27:59 -07:00
Normunds Gavars
d5655e4f0a
Promicro: add support for INA219 current sensor
2025-05-15 00:21:51 +03:00
Adam Mealings
c6e698f886
Make the battery fill based on the percentage slightly smaller to give it a more modern look
2025-05-14 22:17:54 +01:00
adam2872
16e3f6b897
Merge pull request #3 from adam2872/revert-2-RAK4631-user-button
...
Revert "RAK4631 analogue user button on input 31"
2025-05-14 22:05:23 +01:00
adam2872
2d631e21f9
Revert "RAK4631 analogue user button on input 31"
2025-05-14 22:04:28 +01:00
adam2872
5f3c68f8fd
Merge pull request #2 from adam2872/RAK4631-user-button
...
RAK4631 analogue user button on input 31
2025-05-14 21:58:35 +01:00
Adam Mealings
a4675adf66
RAK4631 analogue user button on input 31
2025-05-14 21:46:39 +01:00
Normunds Gavars
de02c0c01f
283 Promicro: add INA3221 library dependency to all build targets
2025-05-14 18:19:53 +03:00
ripplebiz
ed5d462b65
Merge pull request #285 from liamcottle/feature/offline-queue-increase
...
Increase offline queue size to 256 for all companion ble firmwares
2025-05-14 21:28:02 +10:00
Scott Powell
58f1ce55ab
* Promicro: some refactors, minor fixes for INA3221 sensors
2025-05-14 21:22:26 +10:00
liamcottle
190a906450
fix offline queue size for xiao nrf52
2025-05-14 23:10:27 +12:00
ripplebiz
3193e8c3f2
Merge pull request #284 from ngavars/main
...
Telemetry: INA3221 current sensor support for Promicro
2025-05-14 21:07:22 +10:00
liamcottle
19a293ca09
increase offline queue size from 16 to 256 for all companion ble firmwares
2025-05-14 23:02:49 +12:00
Normunds Gavars
a614fe2cb2
283 minor cleanup
2025-05-14 13:58:52 +03:00
Normunds Gavars
2b91bde4a9
283 add new permision for access to environment sensors
2025-05-14 13:55:45 +03:00
Normunds Gavars
016072e45a
283 remove settingsManager and avoid the String class
2025-05-14 13:27:57 +03:00
Scott Powell
71b93bfe5a
* Dispatcher::checkSend() bug: getOutboundCount() should only count non-future packets
2025-05-14 16:50:11 +10:00
Scott Powell
423049b4e0
* TBeam Supreme: refactor for readStringUntil()
2025-05-14 13:11:10 +10:00
ripplebiz
73fb13fd02
Merge pull request #281 from cod3doomy/dev
...
t-beam supreme: added GPS functionality
2025-05-14 12:46:22 +10:00
Normunds Gavars
9d567674a2
Merge pull request #1 from ngavars/promicro-INA3221
...
283 Add support of INA3221 to Promicro telemetry
2025-05-13 23:57:08 +03:00
Normunds Gavars
dbd90ec41a
283 Add support of INA3221 to Promicro telemetry
2025-05-13 23:52:49 +03:00
Scott Powell
2fef457f32
* CommonCLI: added "clear stats" command
2025-05-13 18:12:58 +10:00
cod3doomy
9443ef73fb
t-beam supreme: added GPS functionality
...
Enabled GPS and verified with meshcli.
All supreme envs build.
2025-05-12 23:21:37 -07:00
Scott Powell
16df8c33a2
* Repeater/Room server: new diagnostics, stats.n_full_events now repurposed to 'err_events' (bit flags)
...
* new Radio::isInRecvMode() method
2025-05-13 15:38:10 +10:00
Scott Powell
74d9648b23
* T114: lib_deps missing MicroNMEA
2025-05-12 19:20:02 +10:00
ripplebiz
f9b18a0fd4
Merge pull request #274 from hank/tbeamsupreme-pmu-fix-1
...
Fixes to the TBeam Supreme PMU calls
2025-05-12 19:08:34 +10:00
ripplebiz
6499913136
Merge pull request #273 from recrof/dev
...
raise current limit to max for sx126x and sx127x
2025-05-12 18:36:39 +10:00
recrof
20ed6d072f
raise current limit to max for sx126x and sx127x
2025-05-12 10:19:33 +02:00
hank
7edccad2f9
Disabling MESH_DEBUG by default on TBeam Supreme companion
2025-05-12 01:17:28 -07:00
hank
04540f9d16
Fixes to the PMU calls
2025-05-12 01:09:16 -07:00
hank
ffa853efcf
Fixes to the PMU calls
2025-05-12 01:02:46 -07:00
Scott Powell
0ec236e6c6
* startSendRaw() now returns false if fail
2025-05-12 17:26:44 +10:00
hank
07e19cb2eb
Merge branch 'dev' of https://github.com/ripplebiz/MeshCore into dev
2025-05-11 22:34:17 -07:00
ripplebiz
9889cfb32b
Merge pull request #268 from jquatier/t114-blue-led
...
Disable LED flashing during BLE advertising on T114
2025-05-12 12:42:12 +10:00
Scott Powell
80ac2e8bc0
* repeater: neighbors CLI, now returns secs ago, not timestamp
2025-05-12 12:23:58 +10:00
ripplebiz
4967970592
Merge pull request #266 from jquatier/t114-gps
...
T114 GPS Support
2025-05-12 10:06:14 +10:00
ripplebiz
976b7285e5
Merge pull request #264 from recrof/patch-1
...
tbeam supreme companion: raise channels to 8
2025-05-12 10:03:07 +10:00
JQ
aab802d7ea
don't expose GPD setting unless GPS is connected.
2025-05-11 09:32:34 -07:00
ripplebiz
6be47afd1d
Merge pull request #269 from fdlamotte/wio-e5
...
wio-e5 : initial port
2025-05-11 20:00:13 +10:00
Florent
a350d715a3
wio-e5 : initial port
2025-05-11 09:28:15 +02:00
Jacob Quatier
cfff7a887b
Disable LED flashing during BLE advertising
2025-05-10 20:47:13 -07:00
JQ
51199ddd6e
remove debug
2025-05-09 20:31:28 -07:00
JQ
c1ac5c1f55
t114 gps support
2025-05-09 20:30:11 -07:00
hank
279bd70ebc
Merge branch 'dev' of https://github.com/ripplebiz/MeshCore into dev
2025-05-09 15:57:19 -07:00
Rastislav Vysoky
db0e85d9ed
tbeam supreme companion: raise channels to 8
2025-05-09 16:22:31 +02:00
Scott Powell
af7731a663
* ver bump to v1.6.0
2025-05-09 18:12:42 +10:00
Scott Powell
1899cfc7f9
* ESP32Board: can now download entire log file via OTA webserver (URL: /log)
2025-05-09 16:17:36 +10:00
hank
17ac70dca5
Merge branch 'main' of https://github.com/hank/MeshCore into dev
2025-05-08 16:20:05 -07:00
hank
60bc74f6c9
Delete .vscode/settings.json
...
Removing vscode file incorrectly committed
2025-05-08 01:10:56 -07:00
Scott Powell
919a465c21
* Heltec tracker: new 'periph_power' shared pin (between Display & GPS)
2025-05-08 15:50:53 +10:00
Scott Powell
964c777795
* Heltec tracker: added GPS to custom HWTSensorManager
2025-05-08 13:55:09 +10:00
Scott Powell
188b145203
* refactor: LocationProvider classes moved to src/helpers/sensors
...
* refactor: Heltec_Wireless_Tracker* env moved to new variants/heltec_tracker dir
2025-05-08 13:23:53 +10:00
Scott Powell
3e6f464aaa
* ST7735Display: now applies SCALE_X, SCALE_Y
2025-05-08 12:48:34 +10:00
Scott Powell
acdc2c5543
* Heltec Wireless Tracker fixes: getTextWidth() missing, PIN_BOARD_SDA/SCL
2025-05-08 12:42:28 +10:00
ripplebiz
983e729396
Merge pull request #258 from seagull9000/Heltec-Wireless-Tracker-support
...
Heltec Wireless Tracker support
2025-05-08 12:29:02 +10:00
ripplebiz
e06cfa0d32
Merge pull request #255 from jquatier/bitmap-scaling-7789
...
fixing scaling of bitmaps for 7789 display
2025-05-08 11:33:49 +10:00
JQ
8a278ddb83
new implementation
2025-05-07 18:14:56 -07:00
seagull9000
9feb2b3e15
Heltec Wireless Tracker support
2025-05-07 21:42:29 +12:00
seagull9000
97b2b3e9a8
Heltec Wireless Tracker support
2025-05-07 21:40:27 +12:00
ripplebiz
f804ae1605
Merge pull request #257 from liamcottle/fix/valid-ble-pin
...
ble pin must be zero or a valid 6 digit pin
2025-05-07 19:03:57 +10:00
liamcottle
b914e3c915
ble pin must be zero or a valid 6 digit pin
2025-05-07 20:53:59 +12:00
ripplebiz
8fbce26eb6
Merge pull request #256 from liamcottle/feature/enable-repeater-neighbours
...
enable neighbours feature for all repeater variants
2025-05-07 18:34:05 +10:00
liamcottle
e156096762
enable neighbours feature for all repeater variants
2025-05-07 20:26:15 +12:00
JQ
88e83474ab
fixing scaling of bitmaps for 7789 display
2025-05-06 20:47:14 -07:00
hank
57513f8fb9
Cleaning up power code for the TBeam
2025-05-05 23:58:21 -07:00
hank
20c5277925
Adding support for TBeam 1.1
2025-05-05 23:03:14 -07:00
Scott Powell
cbe3bddd7b
* refactor: removed mesh::Mesh dependency from CommonCLI
2025-05-06 11:51:51 +10:00
ripplebiz
2b1e6456a0
Merge pull request #246 from liamcottle/dev
...
Use identity key as default node name
2025-05-06 10:39:58 +10:00
ripplebiz
867cf6dd43
Merge pull request #251 from recrof/dev
...
Disable debug flags that were not commented out after debugging
2025-05-06 10:37:04 +10:00
ripplebiz
98dff3ef2e
Merge pull request #250 from fdlamotte/fix_set_custom_var
...
fix for set_custom_var
2025-05-06 10:35:30 +10:00
Rastislav Vysoky
4aae54f24c
Merge branch 'ripplebiz:dev' into dev
2025-05-05 22:48:56 +02:00
recrof
7ef5de4da0
disable debug flags that were not commented out after debugging
2025-05-05 22:48:21 +02:00
Florent de Lamotte
d7fb7aa630
fix for set_custom_var
2025-05-05 16:40:00 +02:00
ripplebiz
c8c57e0527
Merge pull request #249 from recrof/dev
...
lilygo t-echo, elecrow thinknode m1: correct display scalling
2025-05-05 19:30:39 +10:00
Rastislav Vysoky
202d8ae18a
Delete src/helpers/CustomLR1121Wrapper.h
2025-05-05 08:34:41 +02:00
Rastislav Vysoky
388f44926b
Delete src/helpers/CustomLR1121.h
2025-05-05 08:34:24 +02:00
recrof
daa42f1f36
echo, m1: correct display scalling; all nrf52 boards jsons: added debug.openocd_target
2025-05-05 08:30:12 +02:00
Scott Powell
09c91f6721
* ST7789Display: now with SCALE_X,SCALE_Y
...
* fix for GxEPDDisplay
2025-05-05 15:54:31 +10:00
ripplebiz
b3720bfde2
Merge pull request #248 from jquatier/t114-landscape
...
T114 landscape display
2025-05-05 15:43:35 +10:00
JQ
afd3ffee3a
T114 Landscape
2025-05-04 21:54:47 -07:00
JQ
478df9170e
T114 Landscape
2025-05-04 21:51:58 -07:00
Scott Powell
f31fb8c968
* GxEPDDIsplay: driver now applying SCALE_X, SCALE_Y
2025-05-05 13:37:48 +10:00
ripplebiz
b7c33bc901
Merge pull request #243 from recrof/dev
...
initial support for Elecrow ThinkNode M1
2025-05-05 13:17:32 +10:00
Scott Powell
351b088194
* FIX: UI should show "< Room Server >"
2025-05-05 13:11:43 +10:00
ripplebiz
ff4a432aef
Merge pull request #247 from jquatier/ui-text-width
...
UI Text Width - minor improvement
2025-05-05 11:53:47 +10:00
Scott Powell
e6764934c6
* companion: fix for _GET_STATUS response
2025-05-05 11:49:17 +10:00
Scott Powell
fd5ac156bf
* companion: protocol ver bump to 5
...
* companion: new prefs: telemetry_mode_base, telemetry_mode_loc
* companion: CMD_SET_OTHER_PARAMS, now optionally can set telemetry_modes
2025-05-05 11:21:55 +10:00
JQ
540401dd2e
cleanup
2025-05-04 18:20:53 -07:00
JQ
8c0e86c171
Implement getTextWidth for display classes
...
- Added getTextWidth method to DisplayDriver interface
- Implemented getTextWidth in all display classes
- Updated examples to use getTextWidth directly
2025-05-04 18:17:18 -07:00
liamcottle
51c110923d
no need for prefs check before prefs are loaded
2025-05-05 11:34:02 +12:00
liamcottle
d319fd3eab
use hex of first 4 bytes of identity public key as default node name
2025-05-05 11:21:31 +12:00
Scott Powell
f4d8b559b5
* SensorManager: now can influence advert lat/lon, new custom name:value pairs for custom settings (eg, gps on/off)
...
* companion: new CMD_GET_CUSTOM_VARS, CMD_SET_CUSTOM_VAR
* T1000e: now supports "gps" custom setting (value "0" or "1")
2025-05-05 00:15:35 +10:00
ripplebiz
1083340bf8
Merge pull request #244 from fdlamotte/t1000e_telemetry_gps
...
t1000e quick and dirty integration of gps into telemetry framework
2025-05-04 23:46:59 +10:00
Florent
7ebc4fe9bf
t1000e quick and dirty integration of gps into telemetry framework
2025-05-03 17:00:53 +02:00
recrof
7816413b89
initial support for Elecrow ThinkNode M1
2025-05-03 15:42:10 +02:00
recrof
86d6a40827
Merge branch 'dev' of github.com:recrof/MeshCore into dev
2025-05-03 14:59:06 +02:00
Scott Powell
314727537c
* companion: new CMD_SEND_TELEMETRY_REQ, PUSH_CODE_TELEMETRY_RESPONSE
2025-05-03 20:08:44 +10:00
Scott Powell
2745f73f50
* new: SensorManager
...
* BasChatMesh: new onContactRequest(), for PAYLOAD_TYPE_REQ handling.
* companion, repeater and room_server: now with basic 'plumbing' to handle REQ_TYPE_GET_TELEMETRY_DATA (0x03).
* dependency: added CayenneLPP to libdeps
* all target.* modules now with a stub 'sensors' object.
2025-05-03 13:14:03 +10:00
ripplebiz
0cf2674079
Merge pull request #242 from fdlamotte/xiao-nrf52_pindef_in_config
...
xiao-nrf : move pindef to platformio.ini
2025-05-03 12:10:44 +10:00
Florent
0c2f895eaf
xiao-nrf : move pindef in pio.ini
2025-05-02 08:27:26 +02:00
Scott Powell
d759d62915
* repeater CLI: 'neighbors' command now responds with "-none-" if no neighbors
2025-05-02 13:24:06 +10:00
ripplebiz
1a36f98cd3
Merge pull request #213 from jquatier/ui-enhancements
...
Device UI Enhancements: Battery indicator, boot screen, radio settings
2025-05-02 11:32:09 +10:00
JQ
1451f87536
revert file
2025-05-01 18:29:25 -07:00
JQ
1c2d3ce786
merge from dev
2025-05-01 18:10:03 -07:00
ripplebiz
91ee7f4ea2
Merge pull request #237 from fdlamotte/t114_monochrome
...
T114 monochrome
2025-05-01 16:01:36 +10:00
ripplebiz
33b8e11f16
Merge pull request #229 from recrof/dev
...
build.sh: detect if we have nrf52 by probing for *.zip and *.hex output files
2025-05-01 12:01:25 +10:00
ripplebiz
e2b21c085a
Merge pull request #234 from fdlamotte/Arduino_serial_using_stream
...
use Stream abstract interface for serial port in ArduinoSerialInterface
2025-04-30 22:14:55 +10:00
Scott Powell
2035e9ff46
* refactor: "neighbors" command
2025-04-30 21:41:09 +10:00
Florent de Lamotte
c8dc94cb97
t114 display : some fixes
2025-04-30 11:26:04 +02:00
Florent de Lamotte
b6ce2847b0
Merge branch 'dev' into t114_monochrome
2025-04-30 11:11:01 +02:00
Florent de Lamotte
a264bce2cc
change screen rotation and fix bitmap
2025-04-30 11:09:43 +02:00
Scott Powell
195d9bfa33
* Repeater: neighbour table now only of other repeaters
2025-04-30 18:43:48 +10:00
Scott Powell
70f8569d21
* bug fix for CLI retry attempts (should be ignored)
2025-04-30 18:10:58 +10:00
Scott Powell
656292340c
* repeater: new CLI command 'neighbors'
2025-04-30 18:01:30 +10:00
recrof
9cb958801d
New Board: Elecrow ThinkNode M1
2025-04-29 17:32:08 +02:00
ripplebiz
43c304405e
Merge pull request #232 from fdlamotte/xiao_s3_screen
...
add display to companion_radio_ble target
2025-04-29 15:50:25 +10:00
Florent de Lamotte
78467ad343
use Stream abstract interface for serial port in ArduinoSerialInterface
2025-04-28 16:17:29 +02:00
Florent de Lamotte
eac48aad1f
add display to companion_radio_ble target
2025-04-28 11:08:20 +02:00
Jacob Quatier
b9d9a703ea
Merge branch 'ripplebiz:main' into ui-enhancements
2025-04-27 20:37:49 -07:00
recrof
92e06ff3b8
detect if we have nrf52 by probing for *.zip and *.hex output files
2025-04-27 10:24:38 +02:00
ripplebiz
7a2869ddd0
Merge pull request #228 from liamcottle/dev
...
remove pin mode setup from uitask
2025-04-26 20:07:48 +10:00
ripplebiz
dcd3707b67
Merge pull request #225 from alesgenova/short-led
...
companion_radio: greatly reduce the status LED usage
2025-04-26 17:27:03 +10:00
liamcottle
6ba70fd77e
remove pin mode setup from uitask
2025-04-26 17:54:59 +12:00
Scott Powell
01cc957114
* Packet::readFrom() payload_len guard
2025-04-26 11:05:13 +10:00
ripplebiz
4ebaf8d793
Merge pull request #223 from neutralinsomniac/add_direnv_to_gitignore
...
Add .direnv/ to .gitignore. This is the directory that holds the nix-generated development environment
2025-04-25 19:28:12 +10:00
Alessandro Genova
b412d74bab
companion_radio: greatly reduce the status LED usage
2025-04-24 23:22:14 -04:00
Florent
079748fab4
some tests
2025-04-24 22:37:06 +02:00
Jeremy O'Brien
5e93326a94
Add .direnv/ to .gitignore. This is the directory that holds the nix-generated development environment
2025-04-24 12:22:52 -04:00
Scott Powell
bfb41c6d84
* new targets: Generic_E22_*_repeater
2025-04-24 13:50:18 +10:00
Scott Powell
8c0c378821
* ESPNOW: packet rx/tx counters
2025-04-24 12:16:55 +10:00
Scott Powell
813ea4c5ec
* ESPNOW: now using hardware RNG for radio_new_identity()
2025-04-24 10:59:01 +10:00
ripplebiz
53634baec7
Merge pull request #222 from rusty-labs/tbeam_sx1262_support
...
Support for TBeam SX1262 board /dev
2025-04-24 10:28:56 +10:00
rusty.labs
20dc022fe2
Support for TBeam SX1262 board
2025-04-23 20:23:06 -04:00
ripplebiz
733679d322
Merge pull request #205 from neutralinsomniac/add_default_nix
...
Add default.nix/.envrc for automagic dev environment on NixOS
2025-04-24 09:56:48 +10:00
ripplebiz
eaa2dd583a
Merge pull request #220 from fdlamotte/xiao-nrf52-targets
...
xiao_nrf52-missing_targets
2025-04-23 19:23:37 +10:00
Florent
7609f34290
xiao_nrf52-missing_targets
2025-04-23 11:20:28 +02:00
ripplebiz
40879c10de
Merge pull request #219 from recrof/dev
...
bugfix: Faketec: only include SSD1306Display during build
2025-04-23 19:06:47 +10:00
recrof
2fe641407a
bugfix: only include SSD1306Display during build
2025-04-23 10:43:56 +02:00
Scott Powell
264f51d510
* RP2040 IdentityStore begin(), to ensure mkdir()
2025-04-22 15:26:04 +10:00
ripplebiz
185149a645
Merge pull request #217 from AeroXuk/feature/rp2040_picow_dev
...
Support for Pi PicoW
2025-04-22 15:04:09 +10:00
AeroXuk
c13190ff1b
Hopefully the correct ADC_MULTIPLIER value.
2025-04-21 23:01:44 +01:00
AeroXuk
eba02b1915
Correct opens to use "w" filemode instead of "w+" filemode.
2025-04-21 21:49:41 +01:00
AeroXuk
b86be66239
Merge 'dev' into 'feature/rp2040_picow_dev'.
2025-04-21 21:21:10 +01:00
AeroXuk
6b34a94fb3
Added Pi PIcoW support in the following modes:
...
- Companion Radio over USB Serial
- Repeater
- Room Server
- Terminal Chat
2025-04-21 21:17:03 +01:00
Scott Powell
615686f5b1
Merge branch 'dev'
2025-04-21 21:57:55 +10:00
Scott Powell
1bdc1b4230
* ver bump to v1.5.1
2025-04-21 21:50:55 +10:00
Scott Powell
b72906a340
* companion: bug fix for 'export contact'
2025-04-21 21:38:57 +10:00
Scott Powell
decb479007
Merge branch 'dev'
2025-04-21 17:39:57 +10:00
Scott Powell
eba5e64e49
* ver bump to v1.5.0
2025-04-21 17:39:36 +10:00
ripplebiz
af5d3dc3d2
Merge pull request #211 from fdlamotte/techo-display
...
Techo display
2025-04-21 16:44:52 +10:00
Scott Powell
1d10a2b780
* fix for AutoDiscoverRTCClock
2025-04-21 16:35:55 +10:00
ripplebiz
843f2c4aca
Merge pull request #212 from fdlamotte/xiao_nrf52-batread
...
xiao-nrf keep vbat_en to low to prevent issues ...
2025-04-21 16:29:26 +10:00
ripplebiz
cc81d618f5
Merge pull request #210 from fdlamotte/xiao_expansion
...
support for xiao expansion board screen
2025-04-21 16:25:51 +10:00
ripplebiz
3347b54081
Merge pull request #208 from cod3doomy/dev
...
updated: t-beam supreme sx1262 to be merged
2025-04-21 16:23:06 +10:00
JQ
6c721a47fd
adding connected check
2025-04-20 19:17:20 -07:00
Jacob Quatier
7065c1438e
UI: battery indicator, boot screen, radio settings
2025-04-20 19:17:02 -07:00
Florent
5d83dfbbc9
xiao-nrf keep vbat_en to low to prevent issues ...
2025-04-20 21:15:59 +02:00
Florent
eda4c5d397
std behaviour
2025-04-20 17:10:57 +02:00
Florent
4d4ab516f0
fix screen boot
2025-04-20 16:44:30 +02:00
Florent
cd766d6795
led and button assigned in ui
2025-04-20 16:41:33 +02:00
Florent
5152f0455a
support for xiao expansion board screen
2025-04-20 11:03:01 +02:00
cod3doomy
e5a93877e6
t-beam s3 supreme: repeater, room server, and ble companion verified working. RTC working. No screen, GPS or sensors.
2025-04-19 19:51:01 -07:00
cod3doomy
44a1195314
Merge branch 'dev' of https://github.com/cod3doomy/MeshCore_HW_Dev into dev
2025-04-17 19:27:08 -07:00
Scott Powell
c16db4d1a0
* room server keep_alive ACKs now have unsynced_count appended.
2025-04-17 15:46:51 +10:00
Jeremy O'Brien
5c040f17a4
add default.nix/.envrc for automagic platformio dev environment on NixOS
2025-04-16 12:18:49 -04:00
Scott Powell
430b5425c8
* room server login response now includes unsynced posts counter
2025-04-16 16:51:04 +10:00
Florent
8833fe78b0
techo-display: first bits
2025-04-15 22:37:50 +02:00
ripplebiz
d401ab766f
Merge pull request #193 from fdlamotte/t114-display
...
T114 display
2025-04-15 18:18:16 +10:00
Florent
00b2325353
Merge branch 'dev' into t114-display
2025-04-15 07:46:45 +02:00
Scott Powell
4011200f72
* fix: compilation error for T1000e
2025-04-15 15:15:06 +10:00
cod3doomy
a4ef28b222
Merge branch 'dev' into dev
2025-04-14 20:43:33 -07:00
ripplebiz
feb4b99716
Merge pull request #202 from fdlamotte/rx_boost_toggle_lr1110
...
permit access to rx_boosted_mode at runtime for LR1110
2025-04-15 12:03:02 +10:00
Florent
ac206e3348
permit access to rx_boosted_mode at runtime for LR1110 (for dpm tests on that setting)
2025-04-14 12:23:28 +02:00
ripplebiz
d76c7136c4
Merge pull request #192 from fdlamotte/prevent-errors-when-built-against-XiaoNrf52Board-by-error
...
compiles xiao_nrf52 board files only if we compile for xiao_nrf52
2025-04-13 13:39:53 +10:00
ripplebiz
1226bc9fe9
Merge pull request #196 from liamcottle/dev
...
Fix RAK4631 builds after addition of Xio nRF52 board
2025-04-13 13:22:58 +10:00
liamcottle
0345810412
fix rak4631 builds after addition of xio nrf52 board
2025-04-13 13:36:39 +12:00
Scott Powell
9eaf3d2b5d
* companion: protocol ver (FIRMWARE_VER_CODE) now 4
2025-04-12 22:06:47 +10:00
Scott Powell
64b6703ae0
* new CMD_SET_OTHER_PARAMS (38)
2025-04-12 22:00:05 +10:00
Scott Powell
289cf71b8f
Companion: new 'manual_add_contacts' pref. New PUSH_CODE_NEW_ADVERT frames
2025-04-12 21:43:30 +10:00
ripplebiz
45240a6795
Merge pull request #189 from fdlamotte/t1000_sensors_disable
...
t1000 : power bat sensor only when necessary
2025-04-12 13:32:01 +10:00
cod3doomy
ca5390dbed
T-Beam Supreme: Repeater and BLE working. Added PCF8563 RTC
2025-04-11 18:17:20 -07:00
Florent
8e04471f89
ui : manage colors and ensure fw using ssd1306 still compile
2025-04-11 22:23:47 +02:00
Florent
23000516a3
compiles xiao_nrf52 board files only if we compile for xiao_nrf52
2025-04-11 14:51:10 +02:00
ripplebiz
7eb939c5b8
Merge pull request #185 from fdlamotte/xiao-nrf52
...
Xiao nrf52
2025-04-11 20:32:44 +10:00
Scott Powell
f6ad1b2118
minor refactor
2025-04-11 19:11:06 +10:00
Florent de Lamotte
2fd8a6e43e
xiao-nrf52 : initial support for meshcore
...
initial config for xiao_nrf52
repeater role for xiao-nrf52
xiao-nrf52 correction on bat voltage
xiao-nrf52 this file should not be here ...
2025-04-11 08:10:18 +02:00
Scott Powell
b85a154e43
Merge branch 'trans-codes' into dev
2025-04-11 15:12:14 +10:00
Scott Powell
122223a9aa
* added Packet::getRawLength() helper
2025-04-11 15:12:04 +10:00
Scott Powell
38861c7053
* companion: onRawDataRecv() guard for payload_len too long
2025-04-11 14:12:09 +10:00
Florent
a052a532ad
t1000 : power bat sensor only when necessary
2025-04-10 22:00:25 +02:00
Scott Powell
20da4046b9
* Packet::header, new: ROUTE_TYPE_TRANS_FLOOD, ROUTE_TYPE_TRANS_DIRECT
...
* Packet wire format change: (optional) extra 4 bytes for two trans_codes
2025-04-11 04:56:13 +10:00
Florent de Lamotte
41af329c44
display and btn handling starts working ...
2025-04-10 16:24:17 +02:00
ripplebiz
d559c897a4
Merge pull request #177 from fdlamotte/t114_usb
...
add companion radio usb to t114
2025-04-10 19:24:04 +10:00
ripplebiz
4f216e8de2
Merge pull request #188 from recrof/dev
...
lilygo t-echo: disable gps to conserve battery, move init stuff to variant.cpp; lilygo t-beam: report battery voltage
2025-04-10 17:09:16 +10:00
cod3doomy
30a45376af
T-Beam Supreme: added PMU config, enabled pwr button. Repeater env verified working.
2025-04-09 18:28:46 -07:00
recrof
291fd1b0b3
LilyGo T-Beam: added battery voltage reporting
2025-04-09 14:08:13 +02:00
recrof
51970fcb72
move gps standby pin to gps section
2025-04-09 13:21:34 +02:00
recrof
e699f77a48
lilygo t-echo: move init stuff to variant.cpp, disable gps to conserve battery
2025-04-09 13:18:35 +02:00
ripplebiz
1992840861
Merge pull request #187 from oltaco/rak-oled-pins
...
add defines for RAK OLED pins
2025-04-09 20:45:41 +10:00
ripplebiz
467925b5c5
Merge pull request #186 from oltaco/wire-setpins-buildfix
...
Wire.setpins buildfix
2025-04-09 19:55:20 +10:00
taco
384512668b
build: fix RAK, T114, T1000 builds
2025-04-09 18:22:01 +10:00
taco
26611003d6
build: fix RAK, T114, T1000e builds
2025-04-09 18:19:13 +10:00
taco
c1aff393de
FIX: define OLED pins for RAK
2025-04-09 18:07:01 +10:00
ripplebiz
b9c9c90f76
Merge pull request #184 from adrian-immel/Fix-Floating-Pin
...
Fix Floating Pin on FakeTec/Promicro: Update BUTTON_PIN to INPUT_PULLUP
2025-04-09 10:27:58 +10:00
cod3doomy
9a4aa4bdbf
Checkpoint: Repeater env built and works with HW. No screen or other periphs
2025-04-08 17:08:28 -07:00
cod3doomy
bd9ef578ac
Initial commit with t-beam supreme sx1262 additions
2025-04-08 09:12:43 -07:00
Adrian
337e7932e3
Fix Floating Pin on Promicro
...
change INPUT to INPUT_PULLUP
2025-04-08 16:08:04 +02:00
ripplebiz
9b449a0a4b
Merge pull request #183 from liamcottle/dev
...
Show version in build info for devices with a screen
2025-04-08 21:37:45 +10:00
liamcottle
54e26a6b42
remove unused variables
2025-04-08 23:17:22 +12:00
liamcottle
430aa0d19e
show firmware version and build date on room server screen
2025-04-08 23:09:55 +12:00
liamcottle
faa3a80f73
show firmware version and build date on repeater screen
2025-04-08 23:05:27 +12:00
liamcottle
e213cc2765
show firmware version and build date on companion screen
2025-04-08 22:58:17 +12:00
ripplebiz
1b08aec38c
Merge pull request #182 from oltaco/tbeam-8-group-channels
...
set TBeam MAX_GROUP_CHANNELS=8
2025-04-08 11:06:58 +10:00
taco
bfd90e3e45
set TBeam MAX_GROUP_CHANNELS=8
2025-04-08 11:04:20 +10:00
Scott Powell
ff6e2447b8
Merge branch 'dev'
2025-04-07 22:01:08 +10:00
Scott Powell
19797c9b87
* ver bump to v1.4.3
2025-04-07 21:59:53 +10:00
Scott Powell
f80f5f090b
* default SF now 11
2025-04-07 21:55:24 +10:00
Scott Powell
7d731e82f5
* ID hash 0x00 and 0xFF now reserved for future.
2025-04-06 12:34:09 +10:00
Florent
49288f161a
add companion radio usb to t114
2025-04-05 17:28:25 +02:00
ripplebiz
98d29a7a2b
Merge pull request #172 from recrof/dev
...
set repeater/room server Lat & Lon to 0.0 as default
2025-04-04 19:26:30 +11:00
ripplebiz
8fe566d95c
Merge pull request #173 from oltaco/promicro-rfswitch
...
FIX: Set RfSwitch pins properly.
2025-04-04 19:25:12 +11:00
taco
b4bc19a942
FIX: Need to explicitly setRfSwitchPins to drive RXEN high when in receive mode.
2025-04-04 15:39:11 +11:00
recrof
e3f13a8285
set repeater/room server Lat & Lon to 0.0 as default
2025-04-03 14:59:20 +02:00
ripplebiz
86c4dbf222
Merge pull request #171 from LitBomb/patch-9
...
Update faq.md
2025-04-02 19:15:33 +11:00
uncle lit
5e3f6e9ca1
Update faq.md
...
Add table of content
Add http://config.meshcore.dev for repeater and room server setup
Add T-Deck GPS info screen sentences counter
Add explanation who 869.525MHz is the chosen frequency for EU and UK and why 867.5MHz isn't good comparing to 869.525
2025-04-01 22:49:09 -07:00
ripplebiz
47ee171147
Merge pull request #167 from fdlamotte/xiao_s3_serial_onpins
...
Allow the use companion radio on other serial interfaces
2025-04-02 00:02:46 +11:00
Florent de Lamotte
a8241aabeb
Merge branch 'dev' into xiao_s3_serial_onpins
2025-04-01 11:33:00 +02:00
Florent de Lamotte
fcfc54d2b4
initial commit
2025-04-01 11:32:04 +02:00
ripplebiz
a895e3a887
Merge pull request #165 from liamcottle/dev
...
Show please wait message on boot
2025-04-01 14:42:59 +11:00
liamcottle
6c34844486
init display before radio
2025-04-01 16:10:12 +13:00
liamcottle
fb57b4d2d6
show please wait message on room server boot
2025-04-01 16:04:06 +13:00
liamcottle
ddeb1421c5
show please wait message on repeater boot
2025-04-01 16:00:09 +13:00
liamcottle
196b225035
show please wait message on companion boot
2025-04-01 15:50:24 +13:00
ripplebiz
331c1d9cff
Merge pull request #164 from liamcottle/dev
...
Fix Companion Display Noise
2025-04-01 13:02:57 +11:00
liamcottle
afe3507ec5
clear display on init to avoid static
2025-04-01 14:46:48 +13:00
ripplebiz
48e4a4289f
Merge pull request #155 from oltaco/promicro-refactor
...
ProMicro refactoring
2025-04-01 12:43:09 +11:00
ripplebiz
245b323076
Merge pull request #163 from LitBomb/patch-7
...
Update faq.md
2025-04-01 12:37:08 +11:00
uncle lit
b66d5ebe15
Update faq.md
...
added the following to FAQ:
public/private flood and repeater set flood.max CLI
public key in hex and base64
How paths are created and reuse to minimize utilization
T-Deck Diag explanation
Update repeater with a Raspberry Pi
clients don't repeat explanation
other meshcore projects
fix discord link to build instruction
2025-03-31 14:51:52 -07:00
Scott Powell
0b95fc76ba
* room server: faster sync of unread posts, MAX_UNSYNCED_POSTS now 32 (was 16)
2025-03-31 14:01:49 +11:00
ripplebiz
57862dec0f
Merge pull request #149 from jameshall9327/main
...
TBeam: Added Repeater
2025-03-31 13:10:20 +11:00
Scott Powell
afc64d8674
* Tbeam fix: GPIO assignments wrong
2025-03-31 13:03:33 +11:00
Scott Powell
017e567669
Merge commit '387a83e129114b6005321739149a1e0eb1fa5a82' into dev
2025-03-31 00:15:38 +11:00
ripplebiz
387a83e129
Merge pull request #157 from fdlamotte/t1000e_clock
...
Remove rtc auto-detect on t1000
2025-03-31 00:14:17 +11:00
Florent
90aaa41d84
Remove rtc auto-detect on t1000
2025-03-30 15:09:40 +02:00
Scott Powell
1c482b4315
Merge branch 'dev'
2025-03-30 19:18:35 +11:00
ripplebiz
5b986a36fc
Merge pull request #145 from recrof/main
...
change new default freq to 869.525
2025-03-30 19:01:55 +11:00
Scott Powell
e2ff6879dc
* ver bump to v1.4.2
2025-03-30 18:56:21 +11:00
taco
2a236b0dc1
fix: give ProMicroLLCC68 a different definition
2025-03-30 15:57:20 +11:00
taco
68b3c75510
Refactor: FaketecBoard to PromicroBoard
2025-03-30 15:52:25 +11:00
Scott Powell
0d2d1e9c66
* minor refactor
2025-03-30 14:47:52 +11:00
ripplebiz
d8d155ca5e
Merge pull request #154 from recrof/dev
...
added new CommonCLI get commands: `get role` and `get public.key`
2025-03-30 14:40:49 +11:00
recrof
f31e78069c
added new CommonCLI get commands: get role and get public.key
2025-03-29 19:40:35 +01:00
Scott Powell
dfca574481
* ESP-Now: long range mode
2025-03-29 13:27:17 +11:00
Scott Powell
01cf9d8535
* isReceiving() now includes either preamble detect or header detect
2025-03-28 22:20:42 +11:00
Scott Powell
f1c2c96fb8
* Dispatcher: now impose a max time for CAD fail (ie. channel busy), defined by getCADFailMaxDuration(), default 4 seconds.
...
(an sx126x bug _might_ be making radio->isReceiving() return true indefinitely)
2025-03-28 20:50:42 +11:00
Scott Powell
f615e9f5b7
* companion: temp fix: logRxRaw() is blowing the MAX_FRAME_SIZE
2025-03-28 14:14:59 +11:00
James Hall
a3cd7fe761
TBeam: Added Repeater
2025-03-27 09:21:29 -04:00
Scott Powell
06684438b3
* refactor: rtc_clock now defined by variants/*/target modules
2025-03-27 21:28:06 +11:00
Scott Powell
c8fa816dfc
* new ESPNOWRadio driver
...
* refactored the examples/*/main.cpp modules, moving radio specifics to variants/*/target modules
* new Generic_ESPNOW_* target envs
2025-03-27 19:34:16 +11:00
Scott Powell
b4b2ca2063
Merge branch 'dev' into esp-now
2025-03-27 17:24:56 +11:00
Scott Powell
882e5ba1c0
* room server: now support "log start/stop..."
2025-03-27 13:00:40 +11:00
recrof
bf48fefd44
change new default freq to 869.525
2025-03-26 18:06:20 +01:00
ripplebiz
8f3d8da5db
Merge pull request #144 from adrian-immel/Fix-Typo
...
Fix build issue for FakeTec board
2025-03-26 16:22:01 +11:00
Adrian
ed69024cae
Update FaketecBoard.cpp
2025-03-25 23:21:05 +01:00
Adrian
6fa77381d2
Rename faketecBoard.h to FaketecBoard.h
2025-03-25 23:16:08 +01:00
Adrian
c6ff5ee850
Rename faketecBoard.cpp to FaketecBoard.cpp
2025-03-25 23:14:48 +01:00
Scott Powell
696dbded26
* experiment: enabling forwarding in terminal chat
2025-03-26 03:57:36 +11:00
Scott Powell
c1c378b40c
* ver bump to 1.4.1
2025-03-25 22:02:37 +11:00
Scott Powell
2424d026dc
* flood_advert_interval" now defaults to 3 hours for upgrading nodes (not just fresh install)
...
* companion: "node_prefs" -> "new_prefs" migration
2025-03-25 20:20:03 +11:00
Scott Powell
83138bd39a
* fix for double radio.begin(). RNG seed from pressing ENTER
2025-03-25 17:40:36 +11:00
Scott Powell
e12d7bf699
* wifi power max
2025-03-25 15:13:07 +11:00
Scott Powell
c97c27561a
* more experiments
2025-03-25 01:26:46 +11:00
Scott Powell
7fff6dfe5c
* ESP-NOW experiment with terminal-chat
2025-03-24 21:16:00 +11:00
Scott Powell
63845b0d5c
* build fixes
2025-03-24 13:11:08 +11:00
ripplebiz
2722ee8f55
Merge pull request #128 from Noki/xiao-s3-wio-room-server
...
xiao s3 wio: add room server
2025-03-24 11:59:05 +11:00
ripplebiz
e20c74b12a
Merge pull request #127 from jameshall9327/main
...
Added screen and button support for the lilygo tbeam
2025-03-24 11:55:22 +11:00
ripplebiz
3768540b9b
Merge pull request #135 from recrof/dev
...
LilyGo T-ECHO: report correct battery voltage
2025-03-24 11:48:52 +11:00
recrof
51a6ce0f62
cleanup
2025-03-23 18:31:39 +01:00
Rastislav Vysoky
0a73a96864
Merge branch 'ripplebiz:dev' into dev
2025-03-23 18:27:02 +01:00
recrof
e921af46b7
LilyGo T-ECHO: report correct battery voltage
2025-03-23 15:57:33 +01:00
Scott Powell
783529325f
* repeater & room server: "node_prefs" -> "com_prefs" migration
2025-03-24 00:50:28 +11:00
Scott Powell
83008d287b
* room server: new config "allow.read.only"
2025-03-24 00:25:36 +11:00
Scott Powell
e951143446
* repeater & room server: new config "flood.advert.interval"
2025-03-23 23:23:02 +11:00
Scott Powell
83c9dd6fa4
* companion: CMD_SEND_TXT_MSG fix for attempt number
2025-03-23 20:25:03 +11:00
Scott Powell
a0ccea47c3
* refactor: ESP32 OTA lib-deps now selectively added
2025-03-23 17:36:31 +11:00
Scott Powell
fe653b2836
* OTA update for ESP32 targets
2025-03-22 23:51:44 +11:00
Scott Powell
71af826344
* workaround for > 3 retry attempts
2025-03-22 22:21:54 +11:00
ripplebiz
0516c65709
Merge pull request #131 from fdlamotte/t1000e_range_fix
...
Some fixes for range issue
2025-03-22 11:54:10 +11:00
Florent de Lamotte
292349c7e0
Some fixes for range issue
2025-03-21 15:08:13 +01:00
Scott Powell
1320b4cea6
* faketec/promicro fix
2025-03-21 21:53:53 +11:00
Scott Powell
1b6ccc1c8d
* fix for Faketec/Promicro
2025-03-21 21:53:23 +11:00
Scott Powell
41918efd6d
* BIG refactor: 'board' and 'radio' objects now defined in 'target.h/.cpp'
...
* mesh::RTCClock class moved to MeshCore.h
2025-03-21 18:57:12 +11:00
Tobias Schwarz
7947d331d2
xiao s3 wio: add room server
2025-03-20 16:49:24 +00:00
James Hall
325569c526
added button support
2025-03-20 12:26:52 -04:00
James Hall
b626dbca8a
removed repeater code not working properly
2025-03-20 11:48:35 -04:00
James Hall
a0633bdbb1
Screen support for tbeam
2025-03-20 11:44:12 -04:00
ripplebiz
d068193481
Merge pull request #124 from recrof/dev
...
added battery voltage support for Heltec T114
2025-03-20 22:22:33 +11:00
recrof
c5a69d4c72
added battery voltage support for Heltec T114
2025-03-20 11:08:13 +01:00
ripplebiz
c18cde7ee2
Merge pull request #123 from oltaco/faketec-support
...
Faketec display and button support.
2025-03-20 15:27:25 +11:00
Scott Powell
aabdabe232
* minor refactor, SNR from packet
2025-03-20 15:26:23 +11:00
taco
2bd3bc1a15
Fix builds for repeater, room server and companion usb.
2025-03-20 12:50:35 +11:00
taco
b87f9b3b55
Remove PIN_OLED_RESET from board header, will leave in build target for now.
2025-03-20 10:05:01 +11:00
taco
5fcdbd357b
Changed BLE pin back to 123456 now - dynamic display sensing happening.
2025-03-20 09:46:40 +11:00
taco
5d7deaffc9
Add faketec changes back after dev merge
2025-03-20 09:27:11 +11:00
taco
3bc9d094ac
Merge branch 'dev' into faketec-support
2025-03-20 09:26:23 +11:00
Scott Powell
46cb2afb4f
* build.sh: .uf2 step also for Faketec/ProMicro targets
2025-03-19 20:22:46 +11:00
Scott Powell
58852bcbd8
* ver bump to v1.4.0
2025-03-19 19:32:07 +11:00
Scott Powell
9c27e887ba
* companion: CMD_SET_DEVICE_PIN now uint32 param, RESP_CODE_DEVICE_INFO now includes ble_pin
2025-03-19 18:21:35 +11:00
Scott Powell
3598836d19
* companion: added CMD_SET_DEVICE_PIN
2025-03-19 17:54:55 +11:00
Scott Powell
debdfef299
* verify() fix moved to Identity class
2025-03-19 17:30:35 +11:00
Scott Powell
d617e78558
* workaround for Identity::verify() bug.
2025-03-19 14:31:48 +11:00
Scott Powell
911fd2994a
* experimental workaround for sig verify() bug
2025-03-19 13:54:43 +11:00
Scott Powell
331caffa98
* refactored platformio.ini, breaking up into variants/*.ini files
2025-03-18 23:57:04 +11:00
Scott Powell
797538bfae
* TBeam: minor refactor.
2025-03-18 21:34:32 +11:00
ripplebiz
ebfcf3abcc
Merge pull request #100 from jameshall9327/main
...
Added Support for the LilyGo TBeam v1.1 and v1.2 with the SX1276
2025-03-18 21:29:38 +11:00
Scott Powell
9af1948674
* room server: now handles REQ_TYPE_GET_STATUS, replies with ServerStats (same as RepeaterStats, with extra fields: n_posted, n_post_push)
2025-03-18 16:49:40 +11:00
Scott Powell
ad8c2e4a65
* companion: RESP_CODE_ERR now has err_code byte
2025-03-18 15:27:55 +11:00
ripplebiz
b2c393ff58
Merge pull request #114 from lincomatic/pr-llcc68
...
Add ProMicroLLCC68 builds
2025-03-18 13:45:03 +11:00
Scott Powell
5b4ac86b06
* CMD_SEND_TRACE_PATH, now replies with RESP_CODE_SENT
2025-03-18 00:14:57 +11:00
Scott Powell
cc9c9b4d57
* workaround for TRACE packets so they can follow a return path
2025-03-17 19:35:08 +11:00
Scott Powell
c07dc51368
* companion support for TRACE packets. (CMD_SEND_TRACE_PATH, PUSH_CODE_TRACE_DATA)
2025-03-17 18:15:38 +11:00
Scott Powell
3aa7cf5652
* redesigned TRACE packet structure
2025-03-17 17:56:12 +11:00
taco
d29ee95a49
match changes to other nrf52 boards, add pin definitions to platformio.ini
2025-03-17 13:51:26 +11:00
taco
c20d3b7dda
revert variant.h pins
2025-03-17 13:50:05 +11:00
taco
8825b74746
Merge branch 'faketec-testing' into dev
2025-03-17 13:15:54 +11:00
taco
dc6a250133
move DISPLAY_CLASS definition
2025-03-17 13:09:26 +11:00
taco
356f0b762d
define PIN_OLED_RESET -1
2025-03-17 13:09:02 +11:00
Scott Powell
c7e1faca80
Merge branch 'dev' into trace
...
# Conflicts:
# examples/companion_radio/main.cpp
2025-03-17 12:18:27 +11:00
taco
7c90cd3e38
tidy up
2025-03-17 12:17:36 +11:00
lincomatic
28fb5875b2
add ProMicroLLCC68 for Faketec w/ LLCC68
2025-03-16 17:48:52 -07:00
lincomatic
a5ba20da35
fix compilation error
2025-03-16 16:49:55 -07:00
Scott Powell
6f79ddc025
* build fix
2025-03-16 22:11:27 +11:00
ripplebiz
34e16cb0d0
Merge pull request #111 from recrof/dev
...
added display support for RAK4631
2025-03-16 21:36:19 +11:00
recrof
304deff1c4
fixed: added back pin inits when SDA and SCL are set.
2025-03-16 10:17:04 +01:00
recrof
91405ac70a
added display support for RAK4631, removed Wire.begin(int, int) from nrf52 devices, cosmetic changes
2025-03-16 09:07:21 +01:00
ripplebiz
35b13beb8e
Merge pull request #107 from recrof/dev
...
heltec v2: added display, room server role
2025-03-16 19:04:38 +11:00
Rastislav Vysoky
9d46aa4307
Merge branch 'ripplebiz:dev' into dev
2025-03-16 07:11:53 +01:00
Scott Powell
968ccc47a3
* companion: SSD1306 display now dynamically detected at runtime.
2025-03-16 13:42:36 +11:00
taco
3c9a15fd14
OLED and button support, some refactoring.
2025-03-16 13:24:43 +11:00
James Hall
3c437fba6a
Merge branch 'dev' into main
2025-03-15 15:10:17 -04:00
recrof
1f16b58822
heltec v2: added display, room server role
2025-03-15 20:10:07 +01:00
James Hall
787658dab7
Update TBeamBoard.h
2025-03-15 13:09:15 -04:00
James Hall
5b74d68a10
Merge branch 'ripplebiz:main' into main
2025-03-15 13:03:49 -04:00
ripplebiz
0edb67ae38
Merge pull request #105 from recrof/dev
...
added display support for t3s3
2025-03-15 23:44:09 +11:00
recrof
a166613cc7
added display support for t3s3
2025-03-15 13:07:18 +01:00
Scott Powell
0e8fe7579b
* CMD_SIGN_DATA null check
2025-03-15 22:06:57 +11:00
Scott Powell
0546edc51f
* companion: can now sign arbitrary data (up to 8K)
2025-03-15 21:41:44 +11:00
Scott Powell
a63a6ec6d4
Merge branch 'dev' into trace
...
# Conflicts:
# examples/companion_radio/main.cpp
# src/Dispatcher.cpp
2025-03-15 15:12:50 +11:00
Scott Powell
05e02babe6
* minor refactor for RAK_4631 SerialInterface
2025-03-15 14:55:52 +11:00
ripplebiz
46454ad7e3
Merge pull request #90 from oltaco/faketec-support
...
Faketec support
2025-03-15 14:47:18 +11:00
ripplebiz
fd04cb818c
Merge pull request #65 from awolden/awolden/h3-pin-fix
...
Fix heltec v3.2 pin polarity reversal
2025-03-15 12:09:47 +11:00
James Hall
935bc8a0de
Cleaned up code
2025-03-14 19:54:46 -04:00
taco
7565014945
remove old unused board.json
2025-03-15 10:54:37 +11:00
James Hall
6d0d9b7d18
removed unnecessary defines
2025-03-14 14:27:10 -04:00
James Hall
d247ec9c24
removed unnecessary constants
2025-03-14 14:22:13 -04:00
Scott Powell
c00ee96d86
* some fixes around the powerOff(). Tidy ups
2025-03-14 19:08:41 +11:00
ripplebiz
54260688f0
Merge pull request #87 from fdlamotte/t1000e_ui
...
enhancement on the UI and support for power off and status_led
2025-03-14 18:52:00 +11:00
taco
fc30e9eb2d
MAX_GROUP_CHANNELS=8 for faketec
2025-03-14 15:24:58 +11:00
taco
21bec6c32b
added conditional to room server radio bringup for supporting RA01sh radio on faketec
2025-03-14 15:22:42 +11:00
James Hall
8c7e4779a4
Delete .vscode/settings.json
2025-03-13 20:42:36 -04:00
James Hall
0e9ce66d2c
removed pmu flag
2025-03-13 20:41:32 -04:00
James Hall
7a08f33604
Update settings.json
2025-03-13 20:35:44 -04:00
ripplebiz
7ffab96733
Merge pull request #94 from LitBomb/patch-5
...
Update faq.md for new EU and UK frequency, additional steps to setup repeater frequency
2025-03-14 11:29:34 +11:00
ripplebiz
fef133124a
Update README.md
2025-03-14 09:55:48 +11:00
James Hall
c5dfb3d8c3
Added Support for the LilyGo TBeam v1.2 SX1276
2025-03-13 14:07:54 -04:00
fdlamotte
b2c8b4dbc4
Merge branch 'ripplebiz:main' into t1000e_ui
2025-03-13 09:44:10 +01:00
taco
bb05858bb6
added SX126X_RX_BOOSTED_GAIN=1 to faketec target
2025-03-13 17:46:58 +11:00
oltaco
84dbc284ad
Merge branch 'ripplebiz:main' into faketec-support
2025-03-13 16:22:02 +11:00
Scott Powell
c3a3309f5e
* ver bump: 1.3.0
2025-03-13 13:46:01 +11:00
Scott Powell
cc3c2ba958
* missing param
2025-03-13 13:32:46 +11:00
uncle lit
5ad461d033
Update faq.md
...
update UK and EU frequency to 869.525MHz per Andy and Recrof
add steps to set frequency on repeater after flash and before disconnecting USB cable
2025-03-12 10:45:07 -07:00
oltaco
f01933f2c3
Merge branch 'ripplebiz:main' into faketec-support
2025-03-12 18:31:37 +11:00
fdlamotte
c107a515d0
Merge branch 'ripplebiz:main' into t1000e_ui
2025-03-11 20:38:52 +01:00
Scott Powell
3dbe6bb11f
Merge branch 'main' into dev
2025-03-11 20:09:59 +11:00
ripplebiz
f94f63f5db
Merge pull request #83 from fdlamotte/configure-cpu-frequency-at-build-time-for-esp32
...
Add an ESP32_CPU_FREQ build flag to lower freq
2025-03-11 20:06:28 +11:00
Florent de Lamotte
9bbe6626bc
resolve conflict
2025-03-11 09:18:50 +01:00
Florent de Lamotte
9a8857b24e
set cpu freq in ESP32Board.h
2025-03-11 09:11:14 +01:00
fdlamotte
47625da085
Merge branch 'ripplebiz:main' into configure-cpu-frequency-at-build-time-for-esp32
2025-03-11 09:01:45 +01:00
Scott Powell
60982b3821
* companion: channel names
2025-03-11 17:58:12 +11:00
taco
6db852f421
updated to MIT licensed board variant
2025-03-11 15:38:37 +11:00
Scott Powell
c0379858b6
* companion: channels now persisted. RESP_CODE_DEVICE_INFO now includes MAX_CONTACTS (div 2) and MAX_GROUP_CHANNELS
2025-03-11 15:31:38 +11:00
Scott Powell
4863508e95
* Companion: new CMD_GET_CHANNEL, CMD_SET_CHANNEL
2025-03-11 14:50:40 +11:00
Scott Powell
6cb1be33d1
* BLE_NAME_PREFIX refactor
2025-03-11 13:25:48 +11:00
Scott Powell
8b586e1b66
Merge branch 'main' into dev
2025-03-11 13:20:52 +11:00
Scott Powell
a38b0455f3
Merge branch 'main' into dev
2025-03-11 13:19:13 +11:00
ripplebiz
f441697205
Merge pull request #74 from ddmunhoz/add-bool-meshcore-prefix
...
add: BLE_NAME_PREFIX flag
2025-03-11 13:02:54 +11:00
ripplebiz
31648b0fdb
Merge pull request #85 from recrof/dev
...
Enabled sx1262 boosted RX gain for all supported radios + platformio.ini: Made quoted -D flags more readable
2025-03-11 12:54:44 +11:00
ripplebiz
782c4a5a69
Merge pull request #71 from fdlamotte/t1000e_txpower
...
tx_power can be raised to 22dBm on LR1110
2025-03-11 12:43:26 +11:00
ripplebiz
e71237258c
Merge pull request #88 from LitBomb/patch-4
...
Update faq.md
2025-03-11 12:40:30 +11:00
taco
eebc4753c3
added conditional to radio bringup for RA01-SH support on faketec
2025-03-11 09:34:52 +11:00
taco
533f87e93b
build fix to support RTC detection code
2025-03-11 09:34:52 +11:00
taco
319218b7ba
Added logic to companion_radio firmware to hopefully fix the radio bringup for Faketec with RA01-SH.
2025-03-11 09:34:52 +11:00
taco
7fa0677fd3
Added defines for SX126X_RXEN, SX126X_TXEN.
...
Updated build target to enable privkey import/export.
2025-03-11 09:34:52 +11:00
taco
aada976237
Faketec board support, including build targets
2025-03-11 09:34:52 +11:00
Florent
d41b535ba8
better handling of BTN_USER_PRESSED definition
2025-03-10 22:42:52 +01:00
uncle lit
340d618258
Update faq.md
...
update Canada to use USA frequency
add guide to add nodes to map
add guide to do OTA firmware update for nRF devices
update donation links
general text cleanup
2025-03-10 11:52:39 -07:00
Florent de Lamotte
afd52de03d
enhancement on the UI and support for power off and status_led for t1000e
2025-03-10 18:11:15 +01:00
Scott Powell
a88a3401c4
* repeater & room server: new CLI config "flood.max"
2025-03-10 23:28:19 +11:00
recrof
8f0fea86ca
Merge branch 'dev' of github.com:recrof/MeshCore into dev
2025-03-09 23:07:36 +01:00
recrof
5e71294069
- Enabled sx1262 boosted RX gain for all supported radios
...
- Made quoted -D flags more readable
2025-03-09 22:57:31 +01:00
Florent
7e34f95f43
Add an ESP32_CPU_FREQ build flag to lower freq
2025-03-09 15:49:35 +01:00
ripplebiz
8a964b4bcb
Merge pull request #81 from recrof/dev
...
roles: t-echo, t114: +room_server; WSL3: +room_server, +repeater
2025-03-10 00:22:33 +11:00
Scott Powell
c5011e8b74
ver bump to 1.2.2
2025-03-09 23:46:03 +11:00
Scott Powell
2a8d42791f
updating RadioLib to ver 7.1.2
2025-03-09 23:44:34 +11:00
Scott Powell
2df1820424
* trying setCRC(1)
2025-03-09 22:15:58 +11:00
Scott Powell
31aca85109
* repeater and room server: MESH_PACKET_LOGGING, now dumps RAW: rx packet contents
...
* Dispatcher: MESH_PACKET_LOGGING, added " hash={packet-hash}"
2025-03-09 20:36:49 +11:00
Rastislav Vysoky
aabd6ef396
Merge branch 'ripplebiz:dev' into dev
2025-03-09 07:16:50 +01:00
Scott Powell
82b53fb64d
* PUSH_CODE_LOG_RX_DATA: is now just: {snr*4},{rssi},{raw-lora-packet}
2025-03-09 17:04:22 +11:00
Scott Powell
5b384a0122
* companion: added new PUSH_CODE_LOG_RX_DATA (0x88) for inspecting all received packets
2025-03-09 15:41:32 +11:00
Scott Powell
bc4f4d0e66
Merge branch 'main' into dev
...
# Conflicts:
# platformio.ini
2025-03-09 14:56:39 +11:00
ripplebiz
ae2e9d9724
Merge pull request #78 from awolden/awolden/enable-SSD13060-lilygo-tlora
...
Enable SSD1306 display class for LilyGo_TLora_V2_1_1_6
2025-03-09 14:43:54 +11:00
Alex Wolden
c32c4c0107
Fix heltec v3.2 pin polarity reversal
2025-03-08 11:21:19 -08:00
Scott Powell
f7523c0eb3
* T1000e battery measure fix
2025-03-08 20:18:15 +11:00
Rastislav Vysoky
b215e46196
Merge branch 'ripplebiz:dev' into dev
2025-03-08 10:05:27 +01:00
Scott Powell
d8391a90ea
* new build option: SX126X_RX_BOOSTED_GAIN
2025-03-08 19:59:07 +11:00
Scott Powell
b6f9bd6a76
* Dispatcher: added guard for packet payload size too large
2025-03-08 19:38:36 +11:00
Rastislav Vysoky
ad7289c88a
added room server roles to t114 and t-echo; added repeater and room server roles to WSL3; unified json intendations in /boards
2025-03-08 09:15:51 +01:00
ripplebiz
c09157c407
Merge pull request #70 from recrof/dev
...
added new board: Station G2; fix: added t114 and t-echo boards to uf2conv release workflow
2025-03-08 15:10:49 +11:00
Scott Powell
211fa85c19
* doc updates
2025-03-08 13:40:39 +11:00
Bence T.
86dbdd1c62
Create packet_structure.md
...
As mentioned by @mofosyne at issue #72
2025-03-08 00:04:43 +01:00
Alex Wolden
f38c17e98e
Enable SSD1306 display class for LilyGo_TLora_V2_1_1_6
2025-03-07 14:30:11 -08:00
Diego Munhoz
09cb6935aa
add: BLE_NAME_PREFIX flag
2025-03-07 11:41:53 -06:00
Rastislav Vysoky
89f068e662
Added basic support for Station G2
2025-03-07 15:34:00 +01:00
Florent de Lamotte
83e50fc5aa
tx_power can be raised to 22dBm on LR1110
2025-03-07 13:52:47 +01:00
Rastislav Vysoky
c108b842a0
Merge branch 'ripplebiz:dev' into dev
2025-03-07 13:42:56 +01:00
Rastislav Vysoky
8d7694383d
fix: added t114 and t-echo boards to uf2conv release workflow
2025-03-07 13:17:46 +01:00
Scott Powell
39f286bdab
Version bump to v1.2.1
2025-03-07 22:01:30 +11:00
Scott Powell
e643722ef3
* Heltec v3.2 VEXT fix
...
* Heltec T114 LED fix, (now flashes with LoRa TX)
2025-03-07 21:37:05 +11:00
Scott Powell
04cc772a4f
* display.begin() delayed in setup().
...
* all firmwares now bumped to v1.2.0
2025-03-07 17:19:27 +11:00
Scott Powell
a1e89e524f
* companion: better incoming ACK processing (match prev attempts)
2025-03-07 15:09:29 +11:00
Scott Powell
c1f51e8996
* companion: FIRMWARE_VER_CODE now bumped to 3.
...
* companion: new RESP_CODE_CONTACT_MSG_RECV_V3, and _CHANNEL_MSG_RECV_V3. (now with packet SNR included)
2025-03-07 14:17:37 +11:00
Scott Powell
ddded8a3e6
* refactor Packet::_snr to single byte
2025-03-07 12:32:23 +11:00
Scott Powell
c762c4440d
* TRACE packet logging fix
2025-03-07 12:24:18 +11:00
Scott Powell
8379a785cc
Merge branch 'dev' into trace
...
# Conflicts:
# src/Dispatcher.cpp
# src/Mesh.cpp
# src/helpers/BaseChatMesh.cpp
2025-03-07 12:14:26 +11:00
Scott Powell
4af80aa1d6
* companion: new command: CMD_GET_CONTACT_BY_KEY (30)
2025-03-07 12:00:11 +11:00
ripplebiz
21537d0085
Merge pull request #68 from recrof/dev
...
Added basic support for Heltec t114, LilyGo T-Echo
2025-03-07 10:22:34 +11:00
Rastislav Vysoky
0bc42c62a6
moved nrf sdk headers to ./lib/ and added Repeater envs for t114 & t-echo
2025-03-07 00:16:22 +01:00
Rastislav Vysoky
dd0fe675a7
Added support for LilyGo T-Echo
2025-03-06 21:39:17 +01:00
Rastislav Vysoky
ffb0ba36d9
fix: T114 reset pin value
2025-03-06 21:37:24 +01:00
Rastislav Vysoky
5a685bc829
Added support for Heltec t114
2025-03-06 20:43:56 +01:00
Scott Powell
4154632d63
* room server: version bump to v1.1.0. This is now NOT compatible with previous clients (TDeck and companion radio).
2025-03-06 18:36:43 +11:00
Scott Powell
f4740815db
* Room Server post ACK bug fix!
2025-03-06 18:16:48 +11:00
ripplebiz
89dde05929
Merge pull request #62 from awolden/awolden/t3lora
...
Add LILYGO T-LoRa V2.1-1.6 firmware
2025-03-06 16:33:27 +11:00
Alex Wolden
27ff6349dc
Revert identity change
2025-03-05 19:38:08 -08:00
Alex Wolden
8d09e0f5c0
Merge remote-tracking branch 'origin/dev' into awolden/t3lora
2025-03-04 23:23:03 -08:00
Alex Wolden
22b3d7c435
Refactor naming
2025-03-04 22:00:48 -08:00
Alex Wolden
300844e4d4
add libsodium
2025-03-04 20:04:19 -08:00
Alex Wolden
7f8a529297
fix memory
2025-03-04 12:13:45 -08:00
Alex Wolden
652b70a36e
readded 1262 radio
2025-03-04 09:03:36 -08:00
Alex Wolden
9c2da990d2
Remove duplicate entries from platformio.ini
...
- Remove unnecessary T3S3 configurations
- Keep only the LilyGo T3 with SX1276 configurations
- Clean up the platformio.ini file to remove duplication
2025-03-04 00:16:35 -08:00
Alex Wolden
30e0047809
Add support for LilyGo T3 with SX1276 module
...
- Add custom partition table for fitting larger firmware
- Create LilyGoT3S3Board.h for board-specific functionality
- Update all example files to support the T3 board with SX1276
- Configure build environment for optimizing firmware size
- Set up the right pin configuration for SX1276 on LilyGo T3
2025-03-04 00:07:36 -08:00
Scott Powell
bea3ccb116
* new Packet type: PAYLOAD_TYPE_TRACE
2025-02-17 19:22:31 +11:00