Doc change to clarify radio setting country reqs.
This commit is contained in:
1 parent
bde435c7c7
commit
81eb11e285
1 file changed
+7
-3
@@ -215,7 +215,8 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
**Note:** Requires reboot to apply
|
||||
|
||||
**Notes:** These settings control the setup of the radio parameters.Refer to the node's manual for the correct settings to use.
|
||||
**Notes:** These settings control the setup of the radio parameters.
|
||||
Refer to the node's manual for the correct settings to use.
|
||||
**Setting a value too high or too low may violate the laws in your country.**
|
||||
|
||||
---
|
||||
@@ -232,7 +233,9 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
**Default:** Varies by board
|
||||
|
||||
**Notes:** This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output. Refer to the node's manual for the correct setting to use. **Setting a value too high may violate the laws in your country.**
|
||||
**Notes:** This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output.
|
||||
Refer to the node's manual for the correct setting to use.
|
||||
**Setting a value too high may violate the laws in your country.**
|
||||
|
||||
---
|
||||
|
||||
@@ -247,7 +250,8 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
- `cr`: Coding rate (5-8)
|
||||
- `timeout_mins`: Duration in minutes (must be > 0)
|
||||
|
||||
**Notes:** These settings control the setup of the radio parameters.Refer to the node's manual for the correct settings to use.
|
||||
**Notes:** These settings control the setup of the radio parameters.
|
||||
Refer to the node's manual for the correct settings to use.
|
||||
**Setting a value too high or too low may violate the laws in your country.**
|
||||
|
||||
**Note:** This is not saved to preferences and will clear on reboot
|
||||
|
||||
Reference in new issue
Block a user