Additional clarity on country legal requirements
This commit is contained in:
1 parent
5c32c46219
commit
cf3998b015
1 file changed
+9
@@ -215,6 +215,9 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
**Note:** Requires reboot to apply
|
||||
|
||||
**Notes:** These settings control the setup of the radio parameters.Refer to the node's manual for the correct settings to use.
|
||||
**Setting a value too high or too low may violate the laws in your country.**
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's transmit power
|
||||
@@ -244,6 +247,9 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
- `cr`: Coding rate (5-8)
|
||||
- `timeout_mins`: Duration in minutes (must be > 0)
|
||||
|
||||
**Notes:** These settings control the setup of the radio parameters.Refer to the node's manual for the correct settings to use.
|
||||
**Setting a value too high or too low may violate the laws in your country.**
|
||||
|
||||
**Note:** This is not saved to preferences and will clear on reboot
|
||||
|
||||
---
|
||||
@@ -575,6 +581,9 @@ This document provides an overview of CLI commands that can be sent to MeshCore
|
||||
|
||||
> **Note:** Added in firmware v1.15.0
|
||||
|
||||
**Notes:** Refer to the node's manual for the correct settings to use.
|
||||
**Setting a value too high may violate the laws in your country.**
|
||||
|
||||
---
|
||||
|
||||
#### View or change the airtime factor (duty cycle limit)
|
||||
|
||||
Reference in new issue
Block a user