A cold start can take up to ~30 min with a weak sky view, so the default
limit before the first fix since boot goes from 15 min to 1 h.
The limit is now a GPS preference, set with `gps firstfix <duration>`
(0 = no limit, at most 1 day) and saved with the other GPS settings, so
repeaters and companions can use different values without a rebuild.
GPS_FIRST_FIX_TIMEOUT_MS stays as the build default.
Repeaters, room servers and sensors already let the battery ADC multiplier be tuned with 'set adc.multiplier' (CommonCLI). The companion firmware had no equivalent, so a board whose divider differs from the build default (common on DIY ProMicro / Faketec boards) always reported a wrong battery voltage.
Adds the same command to the companion CLI. The value is stored in the companion prefs (comp.adc_mult, 0 = board default) and applied at startup via MainBoard::setAdcMultiplier().
Use GxEPD2's busy callback to run the mesh, interface and sensor loops
(loopCore(), shared with loop()) while the panel refreshes, instead of
blocking the main loop. Covers the partial refresh in endFrame(), the
full wipe in startFrame(), and the sleep icon / blank refresh on turnOff().
CMD_SEND_CHANNEL_TXT_MSG reads txt_type, channel_idx and a 4 byte timestamp, so
the frame needs 7 bytes before the text starts, and the branch had no length
guard. For a shorter frame "len - i" is computed in size_t, wraps, and reaches
sendGroupMessage() as a negative int. The clamp there tests
"text_len + prefix_len > MAX_TEXT_LEN", which a negative value passes, and the
following memcpy() converts the length back to a size_t: a 3 byte frame asks for
4294967292 bytes into a 197 byte stack buffer.
Two guards, because there are two mistakes. The branch now states its minimum
like most other branches of handleCmdFrame do, so a frame below 7 bytes is
answered through the existing path instead of being parsed. And
sendGroupMessage() refuses a negative length the way sendGroupData() in the same
file already does, which protects every other caller.
A frame of exactly 7 bytes keeps working and sends an empty message, as before.
Evidence. On a T-Echo running dev c9fa617c, built with
FIRMWARE_BUILD_DATE "f1-dev" and confirmed by "ver => v1.18.0 (Build: f1-dev)":
CH_TXT len=7 -> RESP_CODE_OK
GET_STATS core -> uptime=78s
CH_TXT len=3 -> NO REPLY
DEVICE_QUERY -> NO REPLY (three times over 8 s, node never came back)
'get tz.offset' printed one decimal, so a UTC+5:45 offset (5.75)
read back as 5.8. Print two decimals when the offset is on a quarter
hour (x.25 / x.75); everything else keeps one decimal.