fdlamotte
0153ad1b6f
Merge pull request #3845 from Ve2mrx/fix/gps-sync-before-settle
...
gps: don't let the settle time close a periodic window before the time sync
2026-11-14 21:13:58 -04:00
fdlamotte
21efb56ae7
Merge pull request #3846 from meshcore-dev/reapply-3726
...
Fix USB serial issue on Xiao ESP32-S3 Wio (#1416 ) (#3726 )
2026-11-14 21:11:41 -04:00
Cyclic3
fe520673ae
Fix USB serial issue on Xiao ESP32-S3 Wio ( #1416 ) ( #3726 )
...
* Initial attempt at fixing serial issue on Xiao ESP32-S3 Wio (#1416 )
* restrict Xiao ESP32-S3 WIO fix to just that board
2026-11-14 21:06:23 -04:00
Martin Boissonneault and Claude Opus 5.5
d1c71522b8
gps: don't let the settle time close a periodic window before the time sync
...
In periodic mode a window closed after GPS_FIX_SETTLE_MS (10 s) from the
first fix even if the clock sync was still pending. The sync needs about
4 s of continuous valid fixes (time_valid > 2, reset on any pass without
a fix), so after a hot start, when the receiver reports a fix within
seconds but not yet steadily, the window could close unsynced. On a
board without an RTC the clock then stays at its default until the next
window, a whole period later.
Close the window only once the sync has been tried (done, not needed, or
refused by GPS_GUARD); the settle time and the satellite count apply
after that. The acquisition timeout still bounds the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 18:23:54 -05:00
Martin Boissonneault and Claude Opus 5.5
3a3f69fb5d
rak4631: forward the first-fix limit and gps diag to the serial GPS
...
RakLocationProvider wraps a MicroNMEALocationProvider but did not override
setFirstFixTimeout(), getFirstFixTimeout() or formatDiagnostics(), so on
RAK4631 boards with a serial GPS:
- `gps firstfix` always answered "0 (no limit)" (the LocationProvider
default), while the limit in force was the build default (1 h);
- `gps firstfix <n>` saved the value but never applied it, at once or at boot;
- `gps diag` gave the short base form, without the UART/NMEA counters or fm:.
Forward all three to the NMEA provider. The RAK12500 (I2C) path has no
first-fix limit, so it keeps reporting 0 and the short diagnostics.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 17:42:51 -05:00
Eve
7416193a76
change prefix as well
2026-11-14 15:17:32 -05:00
tth and Claude Opus 5.5
4a4d4b169f
ota_mesh_push.py: airtime of a LoRa frame multiplied the coded payload by CR, not CR + 4 -- ~3x too little, --duty 3 let ~9 % through
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 20:53:02 +01:00
tth
9c4bdcae42
Merge remote-tracking branch 'rfa/main'
2026-11-14 20:35:07 +01:00
tth and Claude Opus 5.5
65f7965955
ota_push.py, ota_mesh_push.py: a directory of a release's packages -- the delta from the node's image is picked (exit 3: none fits)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 20:34:57 +01:00
Florent
63e0bb2a36
gps: support time sync on rak i2c gps
2026-11-14 15:03:01 -04:00
upstream-sync-bot
cc0598b1a4
Merge upstream/dev (1 commits) [upstream-sync]
pub-release / release (push) Successful in 36m36s
2026-11-14 17:06:11 +00:00
upstream-sync-bot
da8310ed0d
Merge upstream/main (1 commits) [upstream-sync]
2026-11-14 17:06:10 +00:00
tth and Claude Opus 5.5
96cbd7333a
ota_push.py: the BLE console as a transport (MAC instead of a USB board), --force
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 14:37:17 +01:00
Marcel Verdult
166863f690
rak: keep WB_IO2 driven HIGH after a failed RAK12500 probe ( #3834 )
...
The I2C probe left WB_IO2 as an input when no RAK12500 answered. WB_IO2
switches the 3V3_S slot rail, which also powers a serial GPS. On base
boards that pull this line low, the serial GPS lost power right after
detection and never got a fix (#3830 ). Before 81afafcb the pin stayed
HIGH, so keep it driven HIGH again. WB_IO4 and WB_IO5 still go back to
inputs.
2026-11-14 08:13:08 -04:00
Cyclic3
a6f2a3050e
Fix USB serial issue on Xiao ESP32-S3 Wio ( #1416 ) ( #3726 )
...
* Initial attempt at fixing serial issue on Xiao ESP32-S3 Wio (#1416 )
* restrict Xiao ESP32-S3 WIO fix to just that board
2026-11-14 08:01:14 -04:00
tth and Claude Opus 5.5
f7bd88c1c8
ota_mesh_push.py --resume: continue a stopped transfer; a lost missing reply no longer ends it
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 12:40:07 +01:00
tth and Claude Opus 5.5
d9c7b9c008
Repeater: TX stall watchdog -- packets queued, nothing sent for 15 min: re-arm, then reboot
...
pub-release / release (push) Successful in 39m1s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 11:02:58 +01:00
tth and Claude Opus 5.5
01d66a66ce
docs/power.md: rxps failed on the live mesh (fewer packets, TX stall); tickless loop sleep measured at zero
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 10:49:16 +01:00
tth
2e8aea5c44
Merge remote-tracking branch 'rfa/main'
2026-11-14 10:42:44 +01:00
tth and Claude Opus 5.5
5970edc99c
NmeaGpsDriver: close the UART while gps duty keeps the GPS off (nRF52)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 10:42:33 +01:00
upstream-sync-bot
fbefa417b9
Merge upstream/dev (16 commits) [upstream-sync]
pub-release / release (push) Successful in 37m31s
2026-11-14 05:06:06 +00:00
Eve
de721bcb4b
use ble.name
2026-11-13 20:35:32 -05:00
tth and Claude Opus 5.5
562b93364d
power_ab.py --budka any: the freshest frame from whichever box holds the meter
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 02:22:24 +01:00
tth and Claude Opus 5.5
d15c057c4f
power_ab.py: age bound before the retry loop (pyright)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 02:21:19 +01:00
tth and Claude Opus 5.5
ec55b7e8c3
power_ab.py --budka: wait out a short gap in the box's meter feed instead of dropping the run
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 02:18:29 +01:00
tth and Claude Opus 5.5
f2dd7e8082
power_ab.py: --budka -- the meter read through a Chytra Budka (cbprom), charge from its Wh counter
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 01:54:27 +01:00
tth and Claude Opus 5.5
14550b5d66
SenseCap_Solar_repeater: no LEDs -- neither the white heartbeat nor blue on every TX
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 01:39:46 +01:00
Liam Cottle
0c760a65ac
Merge pull request #3032 from Quency-D/heltec-rc52
...
Add heltec rc52
2026-11-14 10:43:40 +13:00
fdlamotte
415bd01e4e
Merge pull request #3821 from AlexandrTyshchenko/feature/gps-guard-3d-fix
...
GPS: keep the GPS on for a 3D fix, prefer a recent 3D fix over a 2D one
2026-11-13 14:48:56 -04:00
fdlamotte
60e7d1f868
Merge branch 'dev' into feature/gps-guard-3d-fix
2026-11-13 14:48:02 -04:00
fdlamotte
05a2beb229
Merge pull request #3823 from AlexandrTyshchenko/fix/gps-first-fix-timeout
...
Limit the first periodic GPS acquisition after boot
2026-11-13 14:47:17 -04:00
tth and Claude Opus 5.5
d23fa74642
pub-release: an unfolded merge leaves out what the previous release has
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 19:05:25 +01:00
tth and Claude Opus 5.5
d22005a6fd
OTA phase 5: tools and docs ready for the public export
...
pub-release / release (push) Successful in 32m57s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 18:07:39 +01:00
tth and Claude Opus 5.5
97618f223f
OTA phase 4 checked: mast release = public observer-ota image but for build time; pub-release ref wants a full sha
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 18:03:43 +01:00
tth and Claude Opus 5.5
41dfcef65f
pub-release: only input -- a dry run of a few artifacts instead of all of them
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 17:35:36 +01:00
tth and Claude Opus 5.5
fe44e9a6cd
pub-release: artifact path without the stray quote, bases_repo input for testing the delta path in a dry run
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 17:29:14 +01:00
tth and Claude Opus 5.5
51e733e500
README: the experimental -ota images (admin-pushed firmware update) and the public tools/
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:52:49 +01:00
tth and Claude Opus 5.5
287b562c47
ci: python fallback installs python3-dev when the image's python has no headers
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:49:58 +01:00
tth and Claude Opus 5.5
0caecba931
pub-release: experimental -ota images, OTA packages and deltas, signed SHA256SUMS, dry run
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:47:51 +01:00
tth and Claude Opus 5.5
cf70a95da4
OTA phase 2: the public OTA key meshcore-ota@tth-pub
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:37:57 +01:00
tth and Claude Opus 5.5
0b38eab008
FwUpdate phase 1: only in FW_OTA images, manifest layout 2, no downgrade over the mesh
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:33:29 +01:00
tth and Claude Opus 5.5
c93f5d906d
xiao_serial_dfu.sh: take a board name from the local config, not only a serial
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:33:29 +01:00
tth and Claude Opus 5.5
81d7f600d8
Merge main into ota-admin: tools split, WITH_RX_POWERSAVING
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:12:20 +01:00
tth and Claude Opus 5.5
845a228209
tools/ public with a local config, private tools to .tth/tools/
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 16:03:03 +01:00
tth and Claude Opus 5.5
9165590d13
FwUpdate: over the mesh only deltas, a full image only over USB / BLE
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 15:25:53 +01:00
tth and Claude Opus 5.5
9080d8339d
Masts run the public observer image: one env SenseCap_Solar_repeater
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 14:49:17 +01:00
tth and Claude Opus 5.5
ee935a9fc7
OTA packages from CI: tth-fw-release builds full + delta packages, fleet key
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 14:35:04 +01:00
tth and Claude Opus 5.5
73c1a7beb2
NodeMaintenance, build_version.py: back to the original formatting
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 14:30:19 +01:00
tth and Claude Opus 5.5
46d33bd2b0
FwUpdate: chunk offset overflow, no heavy work in handlers, crc 0 refused
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-13 14:30:19 +01:00
Olexandr Tyshchenko
fb210a8441
GPS: accept a 2D fix, but keep the GPS on for a 3D fix
...
Per review: a 2D fix is valid, only less precise, and in some places a
receiver never gets a 3D fix. So the guard no longer rejects it; instead
the fix mode decides when the GPS may sleep:
- the fix mode is read from GSA for every NMEA receiver, not only with
GPS_GUARD (`fm:` in `gps diag`), and stored with the last fix;
- in periodic mode, and for `gps once`, the GPS sleeps only after a 3D
fix (or a fix from a receiver that does not report the mode); after a
2D fix it stays on up to the acquisition timeout;
- a 2D fix does not replace a 3D fix younger than 5 min
(GPS_3D_FIX_PREFERRED_MS).
2026-11-13 14:30:24 +02:00