Commit Graph
3804 Commits
Author SHA1 Message Date
Scott Powell 69b335d700 Merge commit 'b72fd0dd5e784e6f903380b05287de0652f49819' into ui-task-refactor 2026-11-19 11:54:54 +11:00
Scott Powell 1ad8ca230a * UITask constructors now with same params, so don't have to have separate target-* modules/dirs 2026-11-19 11:54:24 +11:00
fdlamotte b72fd0dd5e ui-task: apply refactoring on thinknode_m5 (#3869) 2026-11-18 11:40:11 -04:00
Scott Powell 26ae484af8 * interface manager now injected via begin() 2026-11-18 23:31:08 +11:00
Scott Powell d05ed2122c * companion UI's moved/refactored to src/helpers/ui
* only select variants .ini config refactored so far (Heltec V3, MeshTracker V1, LilyGo T-Echo Card)
2026-11-18 22:00:04 +11:00
Scott Powell 0b38bfd81a * refactored UITask from repeater/room/sensor to /helpers/ui/server
* added BaseUITask for common behaviours
* ui_task now instantiated in one of the variant's target-*.cpp modules
2026-11-18 18:18:06 +11:00
fdlamotte f8476f94f2 Merge pull request #3843 from fdlamotte/raki2cgps_time_sync
gps: support time sync on rak i2c gps
2026-11-16 12:30:17 -04:00
ripplebiz 2b35435aae Merge pull request #3849 from liamcottle/fix/cc310-mutex-lock
Fix CC310 Mutex Lock
2026-11-15 18:09:10 +11:00
Liam Cottle 04afba03ba Merge pull request #3754 from netrunnereve/bluetooth-name
Allow the user to set a custom bluetooth name using the cli
2026-11-15 20:01:46 +13:00
liamcottle 6cba768181 workaround for CC310 where mutex can still be locked after a failed verification 2026-11-15 18:22:21 +13:00
fdlamotte df445548ad Merge pull request #3844 from Ve2mrx/fix/rak-gps-firstfix-diag
rak4631: forward the first-fix limit and gps diag to the serial GPS
2026-11-14 21:15:23 -04:00
fdlamotte 0153ad1b6f Merge pull request #3845 from Ve2mrx/fix/gps-sync-before-settle
gps: don't let the settle time close a periodic window before the time sync
2026-11-14 21:13:58 -04:00
fdlamotte 21efb56ae7 Merge pull request #3846 from meshcore-dev/reapply-3726
Fix USB serial issue on Xiao ESP32-S3 Wio (#1416) (#3726)
2026-11-14 21:11:41 -04:00
Cyclic3 fe520673ae Fix USB serial issue on Xiao ESP32-S3 Wio (#1416) (#3726)
* Initial attempt at fixing serial issue on Xiao ESP32-S3 Wio (#1416)

* restrict Xiao ESP32-S3 WIO fix to just that board
2026-11-14 21:06:23 -04:00
Martin BoissonneaultandClaude Opus 5.5 d1c71522b8 gps: don't let the settle time close a periodic window before the time sync
In periodic mode a window closed after GPS_FIX_SETTLE_MS (10 s) from the
first fix even if the clock sync was still pending. The sync needs about
4 s of continuous valid fixes (time_valid > 2, reset on any pass without
a fix), so after a hot start, when the receiver reports a fix within
seconds but not yet steadily, the window could close unsynced. On a
board without an RTC the clock then stays at its default until the next
window, a whole period later.

Close the window only once the sync has been tried (done, not needed, or
refused by GPS_GUARD); the settle time and the satellite count apply
after that. The acquisition timeout still bounds the window.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 18:23:54 -05:00
Martin BoissonneaultandClaude Opus 5.5 3a3f69fb5d rak4631: forward the first-fix limit and gps diag to the serial GPS
RakLocationProvider wraps a MicroNMEALocationProvider but did not override
setFirstFixTimeout(), getFirstFixTimeout() or formatDiagnostics(), so on
RAK4631 boards with a serial GPS:
- `gps firstfix` always answered "0 (no limit)" (the LocationProvider
  default), while the limit in force was the build default (1 h);
- `gps firstfix <n>` saved the value but never applied it, at once or at boot;
- `gps diag` gave the short base form, without the UART/NMEA counters or fm:.

Forward all three to the NMEA provider. The RAK12500 (I2C) path has no
first-fix limit, so it keeps reporting 0 and the short diagnostics.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 17:42:51 -05:00
Eve 7416193a76 change prefix as well 2026-11-14 15:17:32 -05:00
Florent 63e0bb2a36 gps: support time sync on rak i2c gps 2026-11-14 15:03:01 -04:00
Marcel Verdult 166863f690 rak: keep WB_IO2 driven HIGH after a failed RAK12500 probe (#3834)
The I2C probe left WB_IO2 as an input when no RAK12500 answered. WB_IO2
switches the 3V3_S slot rail, which also powers a serial GPS. On base
boards that pull this line low, the serial GPS lost power right after
detection and never got a fix (#3830). Before 81afafcb the pin stayed
HIGH, so keep it driven HIGH again. WB_IO4 and WB_IO5 still go back to
inputs.
2026-11-14 08:13:08 -04:00
Eve de721bcb4b use ble.name 2026-11-13 20:35:32 -05:00
Liam Cottle 0c760a65ac Merge pull request #3032 from Quency-D/heltec-rc52
Add heltec rc52
2026-11-14 10:43:40 +13:00
fdlamotte 415bd01e4e Merge pull request #3821 from AlexandrTyshchenko/feature/gps-guard-3d-fix
GPS: keep the GPS on for a 3D fix, prefer a recent 3D fix over a 2D one
2026-11-13 14:48:56 -04:00
fdlamotte 60e7d1f868 Merge branch 'dev' into feature/gps-guard-3d-fix 2026-11-13 14:48:02 -04:00
fdlamotte 05a2beb229 Merge pull request #3823 from AlexandrTyshchenko/fix/gps-first-fix-timeout
Limit the first periodic GPS acquisition after boot
2026-11-13 14:47:17 -04:00
Olexandr Tyshchenko fb210a8441 GPS: accept a 2D fix, but keep the GPS on for a 3D fix
Per review: a 2D fix is valid, only less precise, and in some places a
receiver never gets a 3D fix. So the guard no longer rejects it; instead
the fix mode decides when the GPS may sleep:

- the fix mode is read from GSA for every NMEA receiver, not only with
  GPS_GUARD (`fm:` in `gps diag`), and stored with the last fix;
- in periodic mode, and for `gps once`, the GPS sleeps only after a 3D
  fix (or a fix from a receiver that does not report the mode); after a
  2D fix it stays on up to the acquisition timeout;
- a 2D fix does not replace a 3D fix younger than 5 min
  (GPS_3D_FIX_PREFERRED_MS).
2026-11-13 14:30:24 +02:00
Olexandr Tyshchenko 407cb9abac GPS: first fix timeout as a saved setting (gps firstfix), 1 h by default
A cold start can take up to ~30 min with a weak sky view, so the default
limit before the first fix since boot goes from 15 min to 1 h.

The limit is now a GPS preference, set with `gps firstfix <duration>`
(0 = no limit, at most 1 day) and saved with the other GPS settings, so
repeaters and companions can use different values without a rebuild.
GPS_FIRST_FIX_TIMEOUT_MS stays as the build default.
2026-11-13 14:29:02 +02:00
Eve 9e70d32f79 add cli option to set custom bluetooth name 2026-11-12 11:09:43 -05:00
Olexandr Tyshchenko be9d278a96 Limit the first periodic GPS acquisition after boot
Before the first fix since boot, a periodic acquisition had no timeout. If no
fix is accepted (no sky view, no antenna, or a guard rejecting spoofed fixes),
the receiver then stayed on until a fix was accepted.

Give that window its own limit, GPS_FIRST_FIX_TIMEOUT_MS (15 min by default,
enough for a full almanac; 0 keeps the old behaviour). It counts as a miss and
the next acquisition starts after the configured period.
2026-11-12 10:48:10 +02:00
Quency-D 7762588e58 Fix RC52 unused SPI1 MISO pin mapping
Use pin index 0, which maps to NRFX_SPIM_PIN_NOT_USED, to avoid the nRF52 SPI constructor indexing g_ADigitalPinMap[255]. Remove the absent MISO shutdown reset so the sentinel cannot reset physical P0.00. Follows the variant-side fixes in #3188 and #3189.

Validated heltec_rc52_repeater and heltec_rc52_companion_radio_ble builds. ELF disassembly confirms the MISO lookup uses map[0]=0xFF instead of the +1020-byte read and shutdown has no P0.00 reset. No hardware testing performed.
2026-11-12 15:54:21 +08:00
Quency-D bf0ccfe2eb Fix RC52 companion radio builds 2026-11-12 14:20:08 +08:00
Quency-D 6ff32a57da Merge pull request #20 from meshcore-dev/dev
merge Dev
2026-11-12 14:03:11 +08:00
Liam Cottle 75737f548e Merge pull request #3822 from liamcottle/fix/3811
fix for mdns string not compiling due to ambiguous overload
2026-11-12 16:10:48 +13:00
liamcottle 8c06b34156 fix for mdns string not compiling due to ambiguous overload 2026-11-12 16:08:30 +13:00
Olexandr Tyshchenko 87679ba526 GPS guard: reject a fix the receiver reports as 2D (GSA)
The guard checked satellites and HDOP but not the fix type. When the
receiver sends GSA, a fix it reports as 2D or no-fix is now rejected
(`rej 2d`). Receivers without GSA are unchanged (fix mode unknown).
GPS_GUARD_REQUIRE_3D=0 turns the check off. `gps diag` shows the fix
mode as `fm`.
2026-11-12 00:34:05 +02:00
fdlamotte cb09798408 Merge pull request #3819 from nullrouten0/fix/gps-nmea-buffer-tail
GPS: stop MicroNMEA reading past the NMEA buffer
2026-11-11 18:29:30 -04:00
nullrouten0andClaude Sonnet 5.5 d1be1cbef0 GPS: stop MicroNMEA reading past the NMEA buffer
Add a 16-byte zeroed tail behind the 100-byte NMEA buffer. MicroNMEA's
fixed-width field skips can read a few bytes past the end of a malformed
sentence; with the tail those reads land on NUL bytes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-11 17:58:36 +00:00
fdlamotte 8c88340e82 Merge pull request #3817 from AlexandrTyshchenko/docs/gps-guard-alert-telemetry
GPS guard: drop leftovers of the alert telemetry channel
2026-11-11 10:39:49 -04:00
Olexandr Tyshchenko ace5230ff0 GPS guard: drop leftovers of the alert telemetry channel
#3813 removed the telemetry channel for the GPS time alert. Remove the
docs sentence that still described it and the now unused
GpsGuard::getAlertOffset().
2026-11-11 16:18:58 +02:00
fdlamotte 0ed9ba5724 Merge pull request #3801 from AlexandrTyshchenko/feature/gps-guard-time-wait
GPS guard: show "time wait" instead of "rej nofix" between fixes
2026-11-11 10:13:11 -04:00
fdlamotte 65eca34c5a Merge pull request #3815 from fdlamotte/advert_loc_pref
CommonCLI: get/set loc to replace gps advert command
2026-11-11 10:11:49 -04:00
Florent 798b719caf CommonCLI: get/set loc to replace gps advert command 2026-11-11 09:52:03 -04:00
fdlamotte f349ead541 Merge pull request #3813 from fdlamotte/gps_guard_telem_removal
gps_guard: remove time alert telemetry
2026-11-11 08:06:44 -04:00
fdlamotte 092da136dc Merge pull request #3811 from fdlamotte/mdns_using_char
companion_radio: rewrite mdns part removing String class
2026-11-11 07:58:59 -04:00
Florent 7de440c0d3 gps_guard: remove time alert telemetry 2026-11-11 07:58:39 -04:00
fdlamotte d901822bdf Merge pull request #3812 from fdlamotte/revert-3784
Revert "Merge pull request #3784 from Maxwell456/feature/repeater-his…
2026-11-11 07:52:27 -04:00
Florent cefd4c76cf Revert "Merge pull request #3784 from Maxwell456/feature/repeater-history"
This reverts commit 66d404eac8, reversing
changes made to 1c4b237d73.
2026-11-11 07:49:41 -04:00
Florent 5662e79a78 companion_radio: rewrite mdns part removing String class 2026-11-11 07:37:24 -04:00
fdlamotte 067fb64994 Merge pull request #3810 from fdlamotte/revert_rak13302_tests
tests: revert rak13302 tests
2026-11-11 07:30:25 -04:00
Florent b3b227b773 tests: revert rak13302 tests 2026-11-11 07:26:01 -04:00
Liam Cottle 401fd6c037 Merge pull request #3807 from Valentin-Metz/fix/cli-reply-buffer-overflow
Fix stack-buffer overflow in CLI reply buffers
2026-11-11 17:37:42 +13:00