Commit Graph
4037 Commits
Author SHA1 Message Date
tthandClaude Opus 4.8 a80e68186d docs/ota.md: watchdog recovery, and flag it as a rolling dev release
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-11-16 22:02:39 +01:00
upstream-sync-bot 7216a50ec3 Merge upstream/dev (2 commits) [upstream-sync]
pub-release / release (push) Successful in 40m30s
2026-11-16 17:06:14 +00:00
fdlamotte f8476f94f2 Merge pull request #3843 from fdlamotte/raki2cgps_time_sync
gps: support time sync on rak i2c gps
2026-11-16 12:30:17 -04:00
upstream-sync-bot 8c11154a3a Merge upstream/dev (6 commits) [upstream-sync]
pub-release / release (push) Successful in 36m41s
2026-11-15 17:06:10 +00:00
ripplebiz 2b35435aae Merge pull request #3849 from liamcottle/fix/cc310-mutex-lock
Fix CC310 Mutex Lock
2026-11-15 18:09:10 +11:00
Liam Cottle 04afba03ba Merge pull request #3754 from netrunnereve/bluetooth-name
Allow the user to set a custom bluetooth name using the cli
2026-11-15 20:01:46 +13:00
liamcottle 6cba768181 workaround for CC310 where mutex can still be locked after a failed verification 2026-11-15 18:22:21 +13:00
upstream-sync-bot 391ddfcef2 Merge upstream/dev (6 commits) [upstream-sync]
pub-release / release (push) Successful in 39m9s
2026-11-15 05:06:07 +00:00
fdlamotte df445548ad Merge pull request #3844 from Ve2mrx/fix/rak-gps-firstfix-diag
rak4631: forward the first-fix limit and gps diag to the serial GPS
2026-11-14 21:15:23 -04:00
fdlamotte 0153ad1b6f Merge pull request #3845 from Ve2mrx/fix/gps-sync-before-settle
gps: don't let the settle time close a periodic window before the time sync
2026-11-14 21:13:58 -04:00
fdlamotte 21efb56ae7 Merge pull request #3846 from meshcore-dev/reapply-3726
Fix USB serial issue on Xiao ESP32-S3 Wio (#1416) (#3726)
2026-11-14 21:11:41 -04:00
Cyclic3 fe520673ae Fix USB serial issue on Xiao ESP32-S3 Wio (#1416) (#3726)
* Initial attempt at fixing serial issue on Xiao ESP32-S3 Wio (#1416)

* restrict Xiao ESP32-S3 WIO fix to just that board
2026-11-14 21:06:23 -04:00
Martin BoissonneaultandClaude Opus 5.5 d1c71522b8 gps: don't let the settle time close a periodic window before the time sync
In periodic mode a window closed after GPS_FIX_SETTLE_MS (10 s) from the
first fix even if the clock sync was still pending. The sync needs about
4 s of continuous valid fixes (time_valid > 2, reset on any pass without
a fix), so after a hot start, when the receiver reports a fix within
seconds but not yet steadily, the window could close unsynced. On a
board without an RTC the clock then stays at its default until the next
window, a whole period later.

Close the window only once the sync has been tried (done, not needed, or
refused by GPS_GUARD); the settle time and the satellite count apply
after that. The acquisition timeout still bounds the window.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 18:23:54 -05:00
Martin BoissonneaultandClaude Opus 5.5 3a3f69fb5d rak4631: forward the first-fix limit and gps diag to the serial GPS
RakLocationProvider wraps a MicroNMEALocationProvider but did not override
setFirstFixTimeout(), getFirstFixTimeout() or formatDiagnostics(), so on
RAK4631 boards with a serial GPS:
- `gps firstfix` always answered "0 (no limit)" (the LocationProvider
  default), while the limit in force was the build default (1 h);
- `gps firstfix <n>` saved the value but never applied it, at once or at boot;
- `gps diag` gave the short base form, without the UART/NMEA counters or fm:.

Forward all three to the NMEA provider. The RAK12500 (I2C) path has no
first-fix limit, so it keeps reporting 0 and the short diagnostics.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 17:42:51 -05:00
Eve 7416193a76 change prefix as well 2026-11-14 15:17:32 -05:00
tthandClaude Opus 5.5 4a4d4b169f ota_mesh_push.py: airtime of a LoRa frame multiplied the coded payload by CR, not CR + 4 -- ~3x too little, --duty 3 let ~9 % through
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 20:53:02 +01:00
tth 9c4bdcae42 Merge remote-tracking branch 'rfa/main' 2026-11-14 20:35:07 +01:00
tthandClaude Opus 5.5 65f7965955 ota_push.py, ota_mesh_push.py: a directory of a release's packages -- the delta from the node's image is picked (exit 3: none fits)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 20:34:57 +01:00
Florent 63e0bb2a36 gps: support time sync on rak i2c gps 2026-11-14 15:03:01 -04:00
upstream-sync-bot cc0598b1a4 Merge upstream/dev (1 commits) [upstream-sync]
pub-release / release (push) Successful in 36m36s
2026-11-14 17:06:11 +00:00
upstream-sync-bot da8310ed0d Merge upstream/main (1 commits) [upstream-sync] 2026-11-14 17:06:10 +00:00
tthandClaude Opus 5.5 96cbd7333a ota_push.py: the BLE console as a transport (MAC instead of a USB board), --force
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 14:37:17 +01:00
Marcel Verdult 166863f690 rak: keep WB_IO2 driven HIGH after a failed RAK12500 probe (#3834)
The I2C probe left WB_IO2 as an input when no RAK12500 answered. WB_IO2
switches the 3V3_S slot rail, which also powers a serial GPS. On base
boards that pull this line low, the serial GPS lost power right after
detection and never got a fix (#3830). Before 81afafcb the pin stayed
HIGH, so keep it driven HIGH again. WB_IO4 and WB_IO5 still go back to
inputs.
2026-11-14 08:13:08 -04:00
Cyclic3 a6f2a3050e Fix USB serial issue on Xiao ESP32-S3 Wio (#1416) (#3726)
* Initial attempt at fixing serial issue on Xiao ESP32-S3 Wio (#1416)

* restrict Xiao ESP32-S3 WIO fix to just that board
2026-11-14 08:01:14 -04:00
tthandClaude Opus 5.5 f7bd88c1c8 ota_mesh_push.py --resume: continue a stopped transfer; a lost missing reply no longer ends it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 12:40:07 +01:00
tthandClaude Opus 5.5 d9c7b9c008 Repeater: TX stall watchdog -- packets queued, nothing sent for 15 min: re-arm, then reboot
pub-release / release (push) Successful in 39m1s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 11:02:58 +01:00
tthandClaude Opus 5.5 01d66a66ce docs/power.md: rxps failed on the live mesh (fewer packets, TX stall); tickless loop sleep measured at zero
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 10:49:16 +01:00
tth 2e8aea5c44 Merge remote-tracking branch 'rfa/main' 2026-11-14 10:42:44 +01:00
tthandClaude Opus 5.5 5970edc99c NmeaGpsDriver: close the UART while gps duty keeps the GPS off (nRF52)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 10:42:33 +01:00
upstream-sync-bot fbefa417b9 Merge upstream/dev (16 commits) [upstream-sync]
pub-release / release (push) Successful in 37m31s
2026-11-14 05:06:06 +00:00
Eve de721bcb4b use ble.name 2026-11-13 20:35:32 -05:00
tthandClaude Opus 5.5 562b93364d power_ab.py --budka any: the freshest frame from whichever box holds the meter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 02:22:24 +01:00
tthandClaude Opus 5.5 d15c057c4f power_ab.py: age bound before the retry loop (pyright)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 02:21:19 +01:00
tthandClaude Opus 5.5 ec55b7e8c3 power_ab.py --budka: wait out a short gap in the box's meter feed instead of dropping the run
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 02:18:29 +01:00
tthandClaude Opus 5.5 f2dd7e8082 power_ab.py: --budka -- the meter read through a Chytra Budka (cbprom), charge from its Wh counter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 01:54:27 +01:00
tthandClaude Opus 5.5 14550b5d66 SenseCap_Solar_repeater: no LEDs -- neither the white heartbeat nor blue on every TX
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 01:39:46 +01:00
Liam Cottle 0c760a65ac Merge pull request #3032 from Quency-D/heltec-rc52
Add heltec rc52
2026-11-14 10:43:40 +13:00
fdlamotte 415bd01e4e Merge pull request #3821 from AlexandrTyshchenko/feature/gps-guard-3d-fix
GPS: keep the GPS on for a 3D fix, prefer a recent 3D fix over a 2D one
2026-11-13 14:48:56 -04:00
fdlamotte 60e7d1f868 Merge branch 'dev' into feature/gps-guard-3d-fix 2026-11-13 14:48:02 -04:00
fdlamotte 05a2beb229 Merge pull request #3823 from AlexandrTyshchenko/fix/gps-first-fix-timeout
Limit the first periodic GPS acquisition after boot
2026-11-13 14:47:17 -04:00
tthandClaude Opus 5.5 d23fa74642 pub-release: an unfolded merge leaves out what the previous release has
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 19:05:25 +01:00
tthandClaude Opus 5.5 d22005a6fd OTA phase 5: tools and docs ready for the public export
pub-release / release (push) Successful in 32m57s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 18:07:39 +01:00
tthandClaude Opus 5.5 97618f223f OTA phase 4 checked: mast release = public observer-ota image but for build time; pub-release ref wants a full sha
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 18:03:43 +01:00
tthandClaude Opus 5.5 41dfcef65f pub-release: only input -- a dry run of a few artifacts instead of all of them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 17:35:36 +01:00
tthandClaude Opus 5.5 fe44e9a6cd pub-release: artifact path without the stray quote, bases_repo input for testing the delta path in a dry run
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 17:29:14 +01:00
tthandClaude Opus 5.5 51e733e500 README: the experimental -ota images (admin-pushed firmware update) and the public tools/
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 16:52:49 +01:00
tthandClaude Opus 5.5 287b562c47 ci: python fallback installs python3-dev when the image's python has no headers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 16:49:58 +01:00
tthandClaude Opus 5.5 0caecba931 pub-release: experimental -ota images, OTA packages and deltas, signed SHA256SUMS, dry run
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 16:47:51 +01:00
tthandClaude Opus 5.5 cf70a95da4 OTA phase 2: the public OTA key meshcore-ota@tth-pub
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 16:37:57 +01:00
tthandClaude Opus 5.5 0b38eab008 FwUpdate phase 1: only in FW_OTA images, manifest layout 2, no downgrade over the mesh
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 16:33:29 +01:00