tth and Claude Opus 5.5
1f9bbc71d8
CI, tools: DFU packages signed for the locked bootloader, and LOCKED_NODE releases
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-19 17:50:56 +01:00
tth and Claude Opus 5.5
b7249f449a
Repeater, room server, sensor, companion: build flag LOCKED_NODE for a node that keeps its secrets from whoever holds it
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-19 17:21:29 +01:00
tth and Claude Opus 5.5
769139999d
Companion: the private key and the BLE PIN are again refused over USB, UART and WiFi -- only paired BLE gets them
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-19 17:09:12 +01:00
tth and Claude Opus 5.5
cac3249e41
README: the companion's public BLE PIN, and what physical access to a node gives away
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-19 16:07:23 +01:00
tth and Claude Opus 5.5
dcf10d1c86
Repeater, room server, sensor: a long unknown get no longer overruns the reply buffer
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-19 15:56:28 +01:00
tth and Claude Opus 5.5
961547c7d2
README, docs: replay floor for admins only ( de92ca9b), capped wrong passwords and the blank-login floor ( dbdae145) -- LOGIN_FAIL_MAX/SECS, upstream candidates
...
pub-release / release (push) Successful in 38m32s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
v1.18.0+tth.20261118.2
2026-11-18 13:04:29 +01:00
tth and Claude Opus 5.5
dbdae14566
Repeater, room server, sensor: passwords can no longer be guessed over the air at full speed, and a replayed login no longer floods a reply
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-18 13:03:59 +01:00
tth and Claude Opus 5.5
de92ca9ba2
Repeater, room server, sensor: guests no longer cause a flash write per request
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-18 12:57:53 +01:00
tth and Claude Opus 5.5
84f6fa03b2
CI: release notes list firmware changes first, fold docs/tools/CI, and take a curated "Changelog:" line
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-18 11:12:48 +01:00
tth and Claude Opus 5.5
c8d75947f8
README, docs: the replay floor that survives a reboot ( 1171d8f9) -- core fix, ACL_TS_MAX_AHEAD, upstream candidate
...
pub-release / release (push) Successful in 34m9s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
v1.18.0+tth.20261118
2026-11-18 10:31:04 +01:00
tth and Claude Opus 5.5
1171d8f972
ClientACL: the replay floor survives a reboot -- a captured admin command no longer works after every boot
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-18 10:18:04 +01:00
tth and Claude Opus 5.5
7949fb4274
CI: docs reach the public repo after every sync, and build no release there
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-17 13:15:29 +01:00
tth and Claude Opus 5.5
41d3ba93ea
docs/tth-commands.md: every console command of the fork, where it exists, defaults
...
pub-release / release (push) Canceled after 22s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-17 02:11:04 +01:00
tth and Claude Opus 5.5
0a88dda5f8
README: the fork's extras as they really ship -- watchdogs, defaults, what is release vs own build
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-17 02:08:33 +01:00
tth and Claude Opus 5.5
4b2da2924f
README: experimental firmware, not meant for regular users -- said first
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-17 01:56:56 +01:00
tth and Claude Opus 5.5
27949062df
docs: OTA side channel, the one engine in tth.meshcore, the phone app
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-17 00:18:28 +01:00
tth and Claude Opus 5.5
a69e97583e
ota_mesh_push.py, ota_push.py: run the tth.meshcore OTA engine instead of their own copies
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-16 23:17:55 +01:00
tth and Claude Opus 5.5
f6e792f1bb
ota_mesh_push.py: --side F,BW,SF,CR carries the transfer on a side channel
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-16 22:23:27 +01:00
tth and Claude Opus 4.8
a80e68186d
docs/ota.md: watchdog recovery, and flag it as a rolling dev release
...
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com >
2026-11-16 22:02:39 +01:00
upstream-sync-bot
7216a50ec3
Merge upstream/dev (2 commits) [upstream-sync]
pub-release / release (push) Successful in 40m30s
2026-11-16 17:06:14 +00:00
fdlamotte
f8476f94f2
Merge pull request #3843 from fdlamotte/raki2cgps_time_sync
...
gps: support time sync on rak i2c gps
2026-11-16 12:30:17 -04:00
upstream-sync-bot
8c11154a3a
Merge upstream/dev (6 commits) [upstream-sync]
pub-release / release (push) Successful in 36m41s
2026-11-15 17:06:10 +00:00
ripplebiz
2b35435aae
Merge pull request #3849 from liamcottle/fix/cc310-mutex-lock
...
Fix CC310 Mutex Lock
2026-11-15 18:09:10 +11:00
Liam Cottle
04afba03ba
Merge pull request #3754 from netrunnereve/bluetooth-name
...
Allow the user to set a custom bluetooth name using the cli
2026-11-15 20:01:46 +13:00
liamcottle
6cba768181
workaround for CC310 where mutex can still be locked after a failed verification
2026-11-15 18:22:21 +13:00
upstream-sync-bot
391ddfcef2
Merge upstream/dev (6 commits) [upstream-sync]
pub-release / release (push) Successful in 39m9s
2026-11-15 05:06:07 +00:00
fdlamotte
df445548ad
Merge pull request #3844 from Ve2mrx/fix/rak-gps-firstfix-diag
...
rak4631: forward the first-fix limit and gps diag to the serial GPS
2026-11-14 21:15:23 -04:00
fdlamotte
0153ad1b6f
Merge pull request #3845 from Ve2mrx/fix/gps-sync-before-settle
...
gps: don't let the settle time close a periodic window before the time sync
2026-11-14 21:13:58 -04:00
fdlamotte
21efb56ae7
Merge pull request #3846 from meshcore-dev/reapply-3726
...
Fix USB serial issue on Xiao ESP32-S3 Wio (#1416 ) (#3726 )
2026-11-14 21:11:41 -04:00
Cyclic3
fe520673ae
Fix USB serial issue on Xiao ESP32-S3 Wio ( #1416 ) ( #3726 )
...
* Initial attempt at fixing serial issue on Xiao ESP32-S3 Wio (#1416 )
* restrict Xiao ESP32-S3 WIO fix to just that board
2026-11-14 21:06:23 -04:00
Martin Boissonneault and Claude Opus 5.5
d1c71522b8
gps: don't let the settle time close a periodic window before the time sync
...
In periodic mode a window closed after GPS_FIX_SETTLE_MS (10 s) from the
first fix even if the clock sync was still pending. The sync needs about
4 s of continuous valid fixes (time_valid > 2, reset on any pass without
a fix), so after a hot start, when the receiver reports a fix within
seconds but not yet steadily, the window could close unsynced. On a
board without an RTC the clock then stays at its default until the next
window, a whole period later.
Close the window only once the sync has been tried (done, not needed, or
refused by GPS_GUARD); the settle time and the satellite count apply
after that. The acquisition timeout still bounds the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 18:23:54 -05:00
Martin Boissonneault and Claude Opus 5.5
3a3f69fb5d
rak4631: forward the first-fix limit and gps diag to the serial GPS
...
RakLocationProvider wraps a MicroNMEALocationProvider but did not override
setFirstFixTimeout(), getFirstFixTimeout() or formatDiagnostics(), so on
RAK4631 boards with a serial GPS:
- `gps firstfix` always answered "0 (no limit)" (the LocationProvider
default), while the limit in force was the build default (1 h);
- `gps firstfix <n>` saved the value but never applied it, at once or at boot;
- `gps diag` gave the short base form, without the UART/NMEA counters or fm:.
Forward all three to the NMEA provider. The RAK12500 (I2C) path has no
first-fix limit, so it keeps reporting 0 and the short diagnostics.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 17:42:51 -05:00
Eve
7416193a76
change prefix as well
2026-11-14 15:17:32 -05:00
tth and Claude Opus 5.5
4a4d4b169f
ota_mesh_push.py: airtime of a LoRa frame multiplied the coded payload by CR, not CR + 4 -- ~3x too little, --duty 3 let ~9 % through
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 20:53:02 +01:00
tth
9c4bdcae42
Merge remote-tracking branch 'rfa/main'
2026-11-14 20:35:07 +01:00
tth and Claude Opus 5.5
65f7965955
ota_push.py, ota_mesh_push.py: a directory of a release's packages -- the delta from the node's image is picked (exit 3: none fits)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 20:34:57 +01:00
Florent
63e0bb2a36
gps: support time sync on rak i2c gps
2026-11-14 15:03:01 -04:00
upstream-sync-bot
cc0598b1a4
Merge upstream/dev (1 commits) [upstream-sync]
pub-release / release (push) Successful in 36m36s
2026-11-14 17:06:11 +00:00
upstream-sync-bot
da8310ed0d
Merge upstream/main (1 commits) [upstream-sync]
2026-11-14 17:06:10 +00:00
tth and Claude Opus 5.5
96cbd7333a
ota_push.py: the BLE console as a transport (MAC instead of a USB board), --force
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 14:37:17 +01:00
Marcel Verdult
166863f690
rak: keep WB_IO2 driven HIGH after a failed RAK12500 probe ( #3834 )
...
The I2C probe left WB_IO2 as an input when no RAK12500 answered. WB_IO2
switches the 3V3_S slot rail, which also powers a serial GPS. On base
boards that pull this line low, the serial GPS lost power right after
detection and never got a fix (#3830 ). Before 81afafcb the pin stayed
HIGH, so keep it driven HIGH again. WB_IO4 and WB_IO5 still go back to
inputs.
2026-11-14 08:13:08 -04:00
Cyclic3
a6f2a3050e
Fix USB serial issue on Xiao ESP32-S3 Wio ( #1416 ) ( #3726 )
...
* Initial attempt at fixing serial issue on Xiao ESP32-S3 Wio (#1416 )
* restrict Xiao ESP32-S3 WIO fix to just that board
2026-11-14 08:01:14 -04:00
tth and Claude Opus 5.5
f7bd88c1c8
ota_mesh_push.py --resume: continue a stopped transfer; a lost missing reply no longer ends it
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 12:40:07 +01:00
tth and Claude Opus 5.5
d9c7b9c008
Repeater: TX stall watchdog -- packets queued, nothing sent for 15 min: re-arm, then reboot
...
pub-release / release (push) Successful in 39m1s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 11:02:58 +01:00
tth and Claude Opus 5.5
01d66a66ce
docs/power.md: rxps failed on the live mesh (fewer packets, TX stall); tickless loop sleep measured at zero
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 10:49:16 +01:00
tth
2e8aea5c44
Merge remote-tracking branch 'rfa/main'
2026-11-14 10:42:44 +01:00
tth and Claude Opus 5.5
5970edc99c
NmeaGpsDriver: close the UART while gps duty keeps the GPS off (nRF52)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 10:42:33 +01:00
upstream-sync-bot
fbefa417b9
Merge upstream/dev (16 commits) [upstream-sync]
pub-release / release (push) Successful in 37m31s
2026-11-14 05:06:06 +00:00
Eve
de721bcb4b
use ble.name
2026-11-13 20:35:32 -05:00
tth and Claude Opus 5.5
562b93364d
power_ab.py --budka any: the freshest frame from whichever box holds the meter
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-14 02:22:24 +01:00